Macros Tom Eastep Cristian Rodríguez 2005-11-18 2005 Thomas M. Eastep Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover, and with no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License. This article applies to Shorewall 3.0 and later. If you are running a version of Shorewall earlier than Shorewall 3.0.0 then please see the documentation for that release.
Overview of Shorewall Macros? Shorewall macros allow a symbolic name to be associated with a series of one or more iptables rules. The symbolic name may appear in the ACTION column of an /etc/shorewall/rules file entry and in the TARGET column of an action in which case, the traffic matching that rules file entry will be passed to the series of iptables rules named by the macro. Macros can be thought of as templates. When a macro is invoked in an /etc/shorewall/rules entry, it may be qualified by a logging specification (log level and optionally a log tag). The presence of the log level/tag causes a modified series of rules to be generated in which each packet/rule match within the macro causes a log message to be generated. There are two types of Shorewall macros: Standard Macros. These macros are released as part of Shorewall. They are defined in macros.* files in /usr/share/shorewall. Each macros.* file has a comment at the beginning of the file that describes what the macro does. As an example, here is the definition of the SMB standard macro. # # Shorewall 3.0 /usr/share/shorewall/macro.SMB # # Handle Microsoft SMB traffic. You need to invoke this macro in # both directions. # ###################################################################################### #TARGET SOURCE DEST PROTO DEST SOURCE RATE USER/ # PORT PORT(S) LIMIT GROUP PARAM - - udp 135,445 PARAM - - udp 137:139 PARAM - - udp 1024: 137 PARAM - - tcp 135,139,445 #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE If you wish to modify one of the standard macros, do not modify the definition in /usr/share/shorewall. Rather, copy the file to /etc/shorewall (or somewhere else on your CONFIG_PATH) and modify the copy. User-defined Macros. These macros are created by end-users. They are defined in macros.* files in /etc/shorewall or in another directory listed in your CONFIG_PATH (defined in /etc/shorewall/shorewall.conf). Most Standard Macros are parameterized. That means that you specify what you want to do (ACCEPT, DROP, REJECT, etc.) when you invoke the macro. The SMB macro shown above is parameterized (note PARAM in the TARGET column). When invoking a parameterized macro, you follow the name of the macro with a slash ("/") and the action that you want to substitute for PARAM. Example:
/etc/shorewall/rules: #ACTION SOURCE DEST PROTO DEST PORT(S) SMB/ACCEPT loc fw The above is equivalent to coding the following series of rules: #TARGET SOURCE DEST PROTO DEST PORT(s) ACCEPT loc fw udp 135,445 ACCEPT loc fw udp 137:139 ACCEPT loc fw udp 1024: 137 ACCEPT loc fw tcp 135,139,445
Logging is covered in a following section. The other columns are treated as follows: SOURCE and DEST If a value other than "-" appears in both the macro body and in the invocation of the macro, then the value in the invocation is examined and the appropriate action is taken (you will want to be running Shorewall 3.0.1 or later). If the value in the invocation appears to be an address (IP or MAC) or the name of an ipset, then it is placed after the value in the macro body. Otherwise, it is placed before the value in the macro body. Example 1:
/etc/shorewall/macro.SMTP #TARGET SOURCE DEST PROTO DEST PORT(S) PARAM - loc tcp 25 /etc/shorewall/rules #ACTION SOURCE DEST PROTO DEST PORT(S) SMTP/DNAT:info net 192.168.1.5 This would be equivalent to coding the following directly in /etc/shorewall/rules #ACTION SOURCE DEST PROTO DEST PORT(S) DNAT:info net loc:192.168.1.5 tcp 25
Example 2:
/etc/shorewall/macro.SMTP #TARGET SOURCE DEST PROTO DEST PORT(S) PARAM - 192.168.1.5 tcp 25 /etc/shorewall/rules #ACTION SOURCE DEST PROTO DEST PORT(S) SMTP/DNAT:info net loc This would be equivalent to coding the following directly in /etc/shorewall/rules #ACTION SOURCE DEST PROTO DEST PORT(S) DNAT:info net loc:192.168.1.5 tcp 25
Remaining columns Any value in the invocation replaces the value in the rule in the macro. One remaining restriction must be mentioned: macros that are invoked from actions cannot themselves invoke other actions.
Defining your own Macros To define a new macro: Macro names must be valid shell variable names ((must begin with a letter and be composed of letters, digits and underscore characters) as well as valid Netfilter chain names. Copy /usr/share/shorewall/macro.template to /etc/shorewall/macro.MacroName (for example, if your new macro name is Foo then copy /usr/share/shorewall/macro.template to /etc/shorewall/macro.Foo). Now modify the new file to define the new macro. Columns in the macro.template file are as follows: ACTION - ACCEPT, DROP, REJECT, DNAT, DNAT-, REDIRECT, CONTINUE, LOG, QUEUE, PARAM or an action name. Note that a macro may not invoke another macro. ACCEPT - allow the connection request ACCEPT+ - like ACCEPT but also excludes the connection from any subsequent DNAT[-] or REDIRECT[-] rules. NONAT - Excludes the connection from any subsequent DNAT[-] or REDIRECT[-] rules but doesn't generate a rule to accept the traffic. DROP - ignore the request REJECT - disallow the request and return an icmp unreachable or an RST packet. DNAT - Forward the request to another address (and optionally another port). DNAT- - Advanced users only. Like DNAT but only generates the DNAT iptables rule and not the companion ACCEPT rule. SAME - Similar to DNAT except that the port may not be remapped and when multiple server addresses are listed, all requests from a given remote system go to the same server. SAME- - Advanced users only. Like SAME but only generates the SAME iptables rule and not the companion ACCEPT rule. REDIRECT - Redirect the request to a local port on the firewall. REDIRECT- - Advanced users only. Like REDIRECT but only generates the REDIRECT iptables rule and not the companion ACCEPT rule. CONTINUE - (For experts only). Do not process any of the following rules for this (source zone,destination zone). If The source and/or destination If the address falls into a zone defined later in /etc/shorewall/zones, this connection request will be passed to the rules defined for that (those) zone(s). LOG - Simply log the packet and continue. QUEUE - Queue the packet to a user-space application such as ftwall (http://p2pwall.sf.net). The ACTION may optionally be followed by ":" and a syslog log level (e.g, REJECT:info or DNAT:debug). This causes the packet to be logged at the specified level. SOURCE - Source hosts to which the rule applies. A comma-separated list of subnets and/or hosts. Hosts may be specified by IP or MAC address; mac addresses must begin with ~ and must use - as a separator. Alternatively, clients may be specified by interface name. For example, eth1 specifies a client that communicates with the firewall system through eth1. This may be optionally followed by another colon (:) and an IP/MAC/subnet address as described above (e.g. eth1:192.168.1.5). DEST - Location of Server. Same as above with the exception that MAC addresses are not allowed. Unlike in the SOURCE column, you may specify a range of up to 256 IP addresses using the syntax <first ip>-<last ip>. PROTO - Protocol - Must be tcp, udp, icmp, a number, or all. DEST PORT(S) - Destination Ports. A comma-separated list of Port names (from /etc/services), port numbers or port ranges; if the protocol is icmp, this column is interpreted as the destination icmp-type(s). A port range is expressed as <low port>:<high port>. This column is ignored if PROTOCOL = all but must be entered if any of the following fields are supplied. In that case, it is suggested that this field contain -. If your kernel contains multi-port match support, then only a single Netfilter rule will be generated if in this list and in the CLIENT PORT(S) list below: There are 15 or less ports listed. No port ranges are included. Otherwise, a separate rule will be generated for each port. SOURCE PORT(S) - Port(s) used by the client. If omitted, any source port is acceptable. Specified as a comma-separated list of port names, port numbers or port ranges. If you don't want to restrict client ports but need to specify an ADDRESS in the next column, then place "-" in this column. If your kernel contains multi-port match support, then only a single Netfilter rule will be generated if in this list and in the DEST PORT(S) list above: There are 15 or less ports listed. No port ranges are included. Otherwise, a separate rule will be generated for each port. RATE LIMIT - You may rate-limit the rule by placing a value in this column: <rate>/<interval>[:<burst>]where <rate> is the number of connections per <interval> (sec or min) and <burst> is the largest burst permitted. If no <burst> is given, a value of 5 is assumed. There may be no whitespace embedded in the specification. Example: 10/sec:20 USER/GROUP - For output rules (those with the firewall as their source), you may control connections based on the effective UID and/or GID of the process requesting the connection. This column can contain any of the following: [!]<user number>[:] [!]<user name>[:] [!]:<group number> [!]:<group name> [!]<user number>:<group number> [!]<user name>:<group number> [!]<user inumber>:<group name> [!]<user name>:<group name> [!]+<program name> (Note: support for this form was removed from Netfilter in kernel version 2.6.14). Omitted column entries should be entered using a dash ("-:). Example: /etc/shorewall/macro.LogAndAccept LOG:info ACCEPT To use your macro, in /etc/shorewall/rules you might do something like: #ACTION SOURCE DEST PROTO DEST PORT(S) LogAndAccept loc $FW tcp 22
Macros and Logging Specifying a log level in a rule that invokes a user- or Shorewall-defined action will cause each rule in the macro to be logged with the specified level (and tag). The extent to which logging of macro rules occur is governed by the following: When you invoke a macro and specify a log level, only those rules in the macro that have no log level will be changed to log at the level specified at the action invocation. Example: /etc/shorewall/macro.foo #ACTION SOURCE DEST PROTO DEST PORT(S) ACCEPT - - tcp 22 bar:info /etc/shorewall/rules: #ACTION SOURCE DEST PROTO DEST PORT(S) foo:debug $FW net Logging in the invoked 'foo' macro will be as if foo had been defined as: #ACTION SOURCE DEST PROTO DEST PORT(S) ACCEPT:debug - - tcp 22 bar:info If you follow the log level with "!" then logging will be at that level for all rules recursively invoked by the macro. Example: /etc/shorewall/macro.foo #ACTION SOURCE DEST PROTO DEST PORT(S) ACCEPT - - tcp 22 bar:info /etc/shorewall/rules: #ACTION SOURCE DEST PROTO DEST PORT(S) foo:debug! $FW net Logging in the invoked 'foo' macro will be as if foo had been defined as: #ACTION SOURCE DEST PROTO DEST PORT(S) ACCEPT:debug - - tcp 22 bar:debug
How do I know if I should create an Action or a Macro? While actions and macros perform similar functions, in any given case you will generally find that one is more appropriate than the other. You can not associate an Extension Script with a macro the way that you can with an Action. So if you need access to iptables features not directly supported by Shorewall then you must use an action. Macros are expanded in-line while each action is it's own chain. So if there are a lot of rules involved in your new action/macro then it is generally better to use an action than a macro. Only the packets selected when you invoke the action are directed to the corresponding chain. On the other hand, if there are only one or two rules involved in what you want to do then a macro is more efficient.