shorewall-blacklist 5 blacklist Shorewall Blacklist file /etc/shorewall/blacklist The blacklist file is used to perform static blacklisting. You can blacklist by source address (IP or MAC), or by application. The columns in the file are as follows. ADDRESS/SUBNET - {-|~mac-address|ip-address|address-range|+ipset} Host address, network address, MAC address, IP address range (if your kernel and iptables contain iprange match support) or ipset name prefaced by "+" (if your kernel supports ipset match). MAC addresses must be prefixed with "~" and use "-" as a separator. Example: ~00-A0-C9-15-39-78 A dash ("-") in this column means that any source address will match. This is useful if you want to blacklist a particular application using entries in the PROTOCOL and PORTS columns. PROTOCOL (Optional) - {-|[!]protocol-number|[!]protocol-name} If specified, must be a protocol number or a protocol name from protocols(5). PORTS (Optional) - {-|[!]port-name-or-number[,port-name-or-number]...} May only be specified if the protocol is TCP (6) or UDP (17). A comma-separated list of destination port numbers or service names from services(5). OPTIONS (Optional - Added in 4.4.12) - {-|to|from|} If specified, indicates whether traffic to or from the ADDRESS/SUBNET should be blacklisted. The default is from. If the ADDRESS/SUBNET column is empty, then this column has no effect on the generated rule. In Shorewall 4.4.12, blacklisting is still restricted to traffic arriving on an interface that has the 'blacklist' option set. So to block traffic from your local network to an internet host, you must specify blacklist on your internal interface in shorewall-interfaces (5). Beginning with Shorewall 4.4.13, entries specifying to are applied based on the blacklist setting in shorewall-interfaces(5): Input blacklisting (default if no value given). Traffic entering this interface are passed against the entries in shorewall-blacklist(5) that have the from option (specified or defaulted). Traffic originating on the firewall and leaving by this interface is passed against the entries in shorewall-blacklist(5) that have the to option. Output blacklisting. Traffic entering on this interface is passed against the entries in shorewall-blacklist(5) that have the to option. Example 1: To block DNS queries from address 192.0.2.126: #ADDRESS/SUBNET PROTOCOL PORT 192.0.2.126 udp 53 Example 2: To block some of the nuisance applications: #ADDRESS/SUBNET PROTOCOL PORT - udp 1024:1033,1434 - tcp 57,1433,1434,2401,2745,3127,3306,3410,4899,5554,6101,8081,9898 /etc/shorewall/blacklist http://shorewall.net/blacklisting_support.htm shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-hosts(5), shorewall-interfaces(5), shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5), shorewall-params(5), shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5), shorewall-route_rules(5), shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5), shorewall-zones(5)