holm/shorewall_code
1
0
Fork 0
forked from extern/shorewall_code
Code Pull Requests Activity
0a03598d11
shorewall_code/Shorewall/interfaces
teastep b66929a65e Large merge of function from EXPERIMENTAL to HEAD. 
1) Elimination of the "shorewall monitor" command.

2) The /etc/shorewall/ipsec and /etc/shorewall/zones file are combined into
a single /etc/shorewall/zones file. This is done in an upwardly-compatible
way so that current users can continue to use their existing files.

3) Support has been added for the arp_ignore interface option.

4) DROPINVALID has been removed from shorewall.conf. Behavior is as if
DROPINVALID=No was specified.

5) The 'nobogons' option and BOGON_LOG_LEVEL are removed.

6) Error and warning messages have been made easier to spot by using
capitalization (e.g., ERROR: and WARNING:).

7) The /etc/shorewall/policy file now contains a new connection policy and a
policy for ESTABLISHED packets. Useful for users of snort-inline who want to
pass all packets to the QUEUE target.

8) A new 'critical' option has been added to /etc/shorewall/routestopped.
Shorewall insures communication between the firewall and 'critical' hosts
throughout start, restart, stop and clear. Useful for diskless firewall's
with NFS-mounted file systems, LDAP servers, Crossbow, etc.

9) Macros. Macros are very similar to actions but are easier to use, allow
parameter substitution and are more efficient. Almost all of the standard
actions have been converted to macros in the EXPERIMENTAL branch.

10) The default value of ADD_IP_ALIASES in shorewall.conf is changed to No.

11) If you have 'make' installed on your firewall, then when you use
the '-f' option to 'shorewall start' (as happens when you reboot),
if your /etc/shorewall/ directory contains files that were modified
after Shorewall was last restarted then Shorewall is started using
the config files rather than using the saved configuration.


git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@2409 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2005-07-25 23:08:09 +00:00

249 lines
8.8 KiB
Plaintext
Raw Blame History

#
# Shorewall 2.6 -- Interfaces File
#
# /etc/shorewall/interfaces
#
# You must add an entry in this file for each network interface on your
# firewall system.
#
# Columns are:
#
# ZONE Zone for this interface. Must match the short name
# of a zone defined in /etc/shorewall/zones.
#
# If the interface serves multiple zones that will be
# defined in the /etc/shorewall/hosts file, you should
# place "-" in this column.
#
# INTERFACE Name of interface. Each interface may be listed only
# once in this file. You may NOT specify the name of
# an alias (e.g., eth0:0) here; see
# http://www.shorewall.net/FAQ.htm#faq18
#
# You may specify wildcards here. For example, if you
# want to make an entry that applies to all PPP
# interfaces, use 'ppp+'.
#
# There is no need to define the loopback interface (lo)
# in this file.
#
# BROADCAST The broadcast address for the subnetwork to which the
# interface belongs. For P-T-P interfaces, this
# column is left blank.If the interface has multiple
# addresses on multiple subnets then list the broadcast
# addresses as a comma-separated list.
#
# If you use the special value "detect", the firewall
# will detect the broadcast address for you. If you
# select this option, the interface must be up before
# the firewall is started, you must have iproute
# installed.
#
# If you don't want to give a value for this column but
# you want to enter a value in the OPTIONS column, enter
# "-" in this column.
#
# OPTIONS A comma-separated list of options including the
# following:
#
# dhcp - Specify this option when any of
# the following are true:
# 1. the interface gets its IP address
# via DHCP
# 2. the interface is used by
# a DHCP server running on the firewall
# 3. you have a static IP but are on a LAN
# segment with lots of Laptop DHCP
# clients.
# 4. the interface is a bridge with
# a DHCP server on one port and DHCP
# clients on another port.
#
# norfc1918 - This interface should not receive
# any packets whose source is in one
# of the ranges reserved by RFC 1918
# (i.e., private or "non-routable"
# addresses. If packet mangling or
# connection-tracking match is enabled in
# your kernel, packets whose destination
# addresses are reserved by RFC 1918 are
# also rejected.
#
# nobogons - This interface should not receive
# any packets whose source is in one
# of the ranges reserved by IANA (this
# option does not cover those ranges
# reserved by RFC 1918 -- see above).
#
# I PERSONALLY RECOMMEND AGAINST USING
# THE 'nobogons' OPTION.
#
# routefilter - turn on kernel route filtering for this
# interface (anti-spoofing measure). This
# option can also be enabled globally in
# the /etc/shorewall/shorewall.conf file.
#
# logmartians - turn on kernel martian logging (logging
# of packets with impossible source
# addresses. It is suggested that if you
# set routefilter on an interface that
# you also set logmartians. This option
# may also be enabled globally in the
# /etc/shorewall/shorewall.conf file.
#
# blacklist - Check packets arriving on this interface
# against the /etc/shorewall/blacklist
# file.
#
# maclist - Connection requests from this interface
# are compared against the contents of
# /etc/shorewall/maclist. If this option
# is specified, the interface must be
# an ethernet NIC and must be up before
# Shorewall is started.
#
# tcpflags - Packets arriving on this interface are
# checked for certain illegal combinations
# of TCP flags. Packets found to have
# such a combination of flags are handled
# according to the setting of
# TCP_FLAGS_DISPOSITION after having been
# logged according to the setting of
# TCP_FLAGS_LOG_LEVEL.
#
# proxyarp -
# Sets
# /proc/sys/net/ipv4/conf/<interface>/proxy_arp.
# Do NOT use this option if you are
# employing Proxy ARP through entries in
# /etc/shorewall/proxyarp. This option is
# intended soley for use with Proxy ARP
# sub-networking as described at:
# http://www.tldp.org/HOWTO/mini/Proxy-ARP-Subnet
#
# newnotsyn - TCP packets that don't have the SYN
# flag set and which are not part of an
# established connection will be accepted
# from this interface, even if
# NEWNOTSYN=No has been specified in
# /etc/shorewall/shorewall.conf. In other
# words, packets coming in on this interface
# are processed as if NEWNOTSYN=Yes had been
# specified in /etc/shorewall/shorewall.conf.
#
# This option has no effect if
# NEWNOTSYN=Yes.
#
# It is the opinion of the author that
# NEWNOTSYN=No creates more problems than
# it solves and I recommend against using
# that setting in shorewall.conf (hence
# making the use of the 'newnotsyn'
# interface option unnecessary).
#
# routeback - If specified, indicates that Shorewall
# should include rules that allow filtering
# traffic arriving on this interface back
# out that same interface.
#
# arp_filter - If specified, this interface will only
# respond to ARP who-has requests for IP
# addresses configured on the interface.
# If not specified, the interface can
# respond to ARP who-has requests for
# IP addresses on any of the firewall's
# interface. The interface must be up
# when Shorewall is started.
#
# arp_ignore[=<number>]
# - If specified, this interface will
# respond to arp requests based on the
# value of <number>.
#
# 1 - reply only if the target IP address
# is local address configured on the
# incoming interface
#
# 2 - reply only if the target IP address
# is local address configured on the
# incoming interface and both with the
# sender's IP address are part from same
# subnet on this interface
#
# 3 - do not reply for local addresses
# configured with scope host, only
# resolutions for global and link
# addresses are replied
#
# 4-7 - reserved
#
# 8 - do not reply for all local
# addresses
#
# If no <number> is given then the value
# 1 is assumed
#
# WARNING -- DO NOT SPECIFY arp_ignore
# FOR ANY INTERFACE INVOLVED IN PROXY ARP.
#
# nosmurfs - Filter packets for smurfs
# (packets with a broadcast
# address as the source).
#
# Smurfs will be optionally logged based
# on the setting of SMURF_LOG_LEVEL in
# shorewall.conf. After logging, the
# packets are dropped.
#
# detectnets - Automatically taylors the zone named
# in the ZONE column to include only those
# hosts routed through the interface.
#
# upnp - Incoming requests from this interface may
# be remapped via UPNP (upnpd).
#
# WARNING: DO NOT SET THE detectnets OPTION ON YOUR
# INTERNET INTERFACE.
#
# The order in which you list the options is not
# significant but the list should have no embedded white
# space.
#
# GATEWAY This column is only meaningful if the 'default' OPTION
# is given -- it is ignored otherwise. You may specify
# the default gateway IP address for this interface here
# and Shorewall will use that IP address rather than any
# that it finds in the main routing table.
#
# Example 1: Suppose you have eth0 connected to a DSL modem and
# eth1 connected to your local network and that your
# local subnet is 192.168.1.0/24. The interface gets
# it's IP address via DHCP from subnet
# 206.191.149.192/27. You have a DMZ with subnet
# 192.168.2.0/24 using eth2.
#
# Your entries for this setup would look like:
#
# net eth0 206.191.149.223 dhcp
# local eth1 192.168.1.255
# dmz eth2 192.168.2.255
#
# Example 2: The same configuration without specifying broadcast
# addresses is:
#
# net eth0 detect dhcp
# loc eth1 detect
# dmz eth2 detect
#
# Example 3: You have a simple dial-in system with no ethernet
# connections.
#
# net ppp0 -
#
# For additional information, see http://shorewall.net/Documentation.htm#Interfaces
#
##############################################################################
#ZONE INTERFACE BROADCAST OPTIONS GATEWAY
#
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
View Git Blame Copy Permalink