holm/shorewall_code
1
0
Fork 0
forked from extern/shorewall_code
Code Pull Requests Activity
0a4d40bd84
shorewall_code/Shorewall-perl/Shorewall/Config.pm
teastep 0a4d40bd84 Add single back quote to the verboten characters 
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@6313 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2007-05-09 23:20:31 +00:00

1166 lines
32 KiB
Perl
Raw Blame History

#
# Shorewall-perl 3.9 -- /usr/share/shorewall-perl/Shorewall/Config.pm
#
# This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
# (c) 2007 - Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
# This module is responsible for lower level configuration file handling.
# It also exports functions for generating warning and error messages.
# The get_configuration function parses the shorewall.conf, capabilities and
# modules files during compiler startup.
#
package Shorewall::Config;
use strict;
use warnings;
use Shorewall::Common;
use File::Basename;
our @ISA = qw(Exporter);
our @EXPORT = qw(
warning_message
fatal_error
find_file
split_line
open_file
close_file
push_open
pop_open
read_a_line
validate_level
qt
get_configuration
require_capability
report_capabilities
propagateconfig
append_file
run_user_exit
generate_aux_config
%config
%globals
%capabilities
%protocols
%services );
our @EXPORT_OK = ();
our @VERSION = 1.00;
#
# Misc Globals
#
our %globals = ( SHAREDIR => '/usr/share/shorewall' ,
CONFDIR => '/etc/shorewall',
SHAREDIRPL => '/usr/share/shorewall-perl/',
ORIGINAL_POLICY_MATCH => '',
LOGPARMS => '',
TC_SCRIPT => '',
VERSION => '3.9.6',
);
#
# From shorewall.conf file
#
our %config =
( STARTUP_ENABLED => undef,
VERBOSITY => undef,
#
# Logging
#
LOGFILE => undef,
LOGFORMAT => undef,
LOGTAGONLY => undef,
LOGRATE => undef,
LOGBURST => undef,
LOGALLNEW => undef,
BLACKLIST_LOGLEVEL => undef,
MACLIST_LOG_LEVEL => undef,
TCP_FLAGS_LOG_LEVEL => undef,
RFC1918_LOG_LEVEL => undef,
SMURF_LOG_LEVEL => undef,
LOG_MARTIANS => undef,
#
# Location of Files
#
IPTABLES => undef,
#
#PATH is inherited
#
PATH => undef,
SHOREWALL_SHELL => undef,
SUBSYSLOCK => undef,
MODULESDIR => undef,
#
#CONFIG_PATH is inherited
#
CONFIG_PATH => undef,
RESTOREFILE => undef,
IPSECFILE => undef,
LOCKFILE => undef,
#
# Default Actions/Macros
#
DROP_DEFAULT => undef,
REJECT_DEFAULT => undef,
ACCEPT_DEFAULT => undef,
QUEUE_DEFAULT => undef,
#
# Firewall Options
#
BRIDGING => undef,
IP_FORWARDING => undef,
ADD_IP_ALIASES => undef,
ADD_SNAT_ALIASES => undef,
RETAIN_ALIASES => undef,
TC_ENABLED => undef,
TC_EXPERT => undef,
CLEAR_TC => undef,
MARK_IN_FORWARD_CHAIN => undef,
CLAMPMSS => undef,
ROUTE_FILTER => undef,
DETECT_DNAT_IPADDRS => undef,
MUTEX_TIMEOUT => undef,
ADMINISABSENTMINDED => undef,
BLACKLISTNEWONLY => undef,
DELAYBLACKLISTLOAD => undef,
MODULE_SUFFIX => undef,
DISABLE_IPV6 => undef,
DYNAMIC_ZONES => undef,
PKTTYPE=> undef,
RFC1918_STRICT => undef,
MACLIST_TABLE => undef,
MACLIST_TTL => undef,
SAVE_IPSETS => undef,
MAPOLDACTIONS => undef,
FASTACCEPT => undef,
IMPLICIT_CONTINUE => undef,
HIGH_ROUTE_MARKS => undef,
USE_ACTIONS=> undef,
OPTIMIZE => undef,
EXPORTPARAMS => undef,
SHOREWALL_COMPILER => undef,
#
# Packet Disposition
#
MACLIST_DISPOSITION => undef,
TCP_FLAGS_DISPOSITION => undef,
BLACKLIST_DISPOSITION => undef,
);
#
# Config options and global settings that are to be copied to object
#
my @propagateconfig = qw/ CLEAR_TC DISABLE_IPV6 ADMINISABSENTMINDED IP_FORWARDING MODULESDIR MODULE_SUFFIX LOGFORMAT SUBSYSLOCK LOCKFILE/;
my @propagateenv = qw/ LOGLIMIT LOGTAGONLY LOGRULENUMBERS /;
#
# From parsing the capabilities file
#
our %capabilities =
( NAT_ENABLED => undef,
MANGLE_ENABLED => undef,
MULTIPORT => undef,
XMULTIPORT => undef,
CONNTRACK_MATCH => undef,
USEPKTTYPE => undef,
POLICY_MATCH => undef,
PHYSDEV_MATCH => undef,
LENGTH_MATCH => undef,
IPRANGE_MATCH => undef,
RECENT_MATCH => undef,
OWNER_MATCH => undef,
IPSET_MATCH => undef,
CONNMARK => undef,
XCONNMARK => undef,
CONNMARK_MATCH => undef,
XCONNMARK_MATCH => undef,
RAW_TABLE => undef,
IPP2P_MATCH => undef,
CLASSIFY_TARGET => undef,
ENHANCED_REJECT => undef,
KLUDGEFREE => undef,
MARK => undef,
XMARK => undef,
MANGLE_FORWARD => undef,
COMMENTS => undef,
ADDRTYPE => undef,
);
#
# /etc/protocols and /etc/services
#
our %protocols;
our %services;
#
# Capabilities
#
my %capdesc = ( NAT_ENABLED => 'NAT',
MANGLE_ENABLED => 'Packet Mangling',
MULTIPORT => 'Multi-port Match' ,
XMULTIPORT => 'Extended Multi-port Match',
CONNTRACK_MATCH => 'Connection Tracking Match',
USEPKTTYPE => 'Packet Type Match',
POLICY_MATCH => 'Policy Match',
PHYSDEV_MATCH => 'Physdev Match',
LENGTH_MATCH => 'Packet length Match',
IPRANGE_MATCH => 'IP Range Match',
RECENT_MATCH => 'Recent Match',
OWNER_MATCH => 'Owner Match',
IPSET_MATCH => 'Ipset Match',
CONNMARK => 'CONNMARK Target',
XCONNMARK => 'Extended CONNMARK Target',
CONNMARK_MATCH => 'Connmark Match',
XCONNMARK_MATCH => 'Extended Connmark Match',
RAW_TABLE => 'Raw Table',
IPP2P_MATCH => 'IPP2P Match',
CLASSIFY_TARGET => 'CLASSIFY Target',
ENHANCED_REJECT => 'Extended Reject',
KLUDGEFREE => 'Repeat match',
MARK => 'MARK Target',
XMARK => 'Extended Mark Target',
MANGLE_FORWARD => 'Mangle FORWARD Chain',
COMMENTS => 'Comments',
ADDRTYPE => 'Address Type Match',
);
#
# Directories to search for configuration files
#
my @config_path;
#
# Stash away file references here when we encounter INCLUDE
#
my @includestack;
#
# Allow nested opens
#
my @openstack;
my $currentfile; # File handle reference
my $currentfilename; # File NAME
my $currentlinenumber = 0; # Line number
#
# Issue a Warning Message
#
sub warning_message
{
my $lineinfo = $currentfile ? " : $currentfilename ( line $currentlinenumber )" : '';
print STDERR " WARNING: @_$lineinfo\n";
}
#
# Issue fatal error message and die
#
sub fatal_error {
my $lineinfo = $currentfile ? " : $currentfilename ( line $currentlinenumber )" : '';
print STDERR " ERROR: @_$lineinfo\n";
exit 1;
}
#
# Search the CONFIG_PATH for the passed file
#
sub find_file($)
{
my $filename=$_[0];
return $filename if substr( $filename, 0, 1 ) eq '/';
my $directory;
for $directory ( @config_path ) {
my $file = "$directory$filename";
return $file if -f $file;
}
"$globals{CONFDIR}/$filename";
}
#
# When splitting a line, don't pad out the columns with '-' if the first column contains one of these
#
my %no_pad = ( COMMENT => 1,
SECTION => 1 );
#
# Pre-process a line from a configuration file.
# ensure that it has an appropriate number of columns.
# supply '-' in omitted trailing columns.
#
sub split_line( $$$ ) {
my ( $mincolumns, $maxcolumns, $description ) = @_;
fatal_error "Shorewall Configuration file entries may not contain double quotes, single back quotes or backslashes" if $line =~ /"`\\/;
my @line = split /\s+/, $line;
return @line if $no_pad{$line[0]};
fatal_error "Shorewall Configuration file entries may not contain single quotes" if $line =~ /'/;
fatal_error "Invalid $description entry (too few columns)" if @line < $mincolumns;
fatal_error "Invalid $description entry (too many columns)" if @line > $maxcolumns;
push @line, '-' while @line < $maxcolumns;
@line;
}
#
# Open a file, setting $currentfile. Returns the file's absolute pathname if the file
# exists, is non-empty and was successfully opened. Terminates with a fatal error
# if the file exists, is non-empty, but the open fails.
#
sub do_open_file( $ ) {
my $fname = $_[0];
open $currentfile, '<', $fname or fatal_error "Unable to open $fname: $!";
$currentlinenumber = 0;
$currentfilename = $fname;
}
sub open_file( $ ) {
my $fname = find_file $_[0];
fatal_error 'Internal Error in open_file()' if defined $currentfile;
do_open_file $fname if -f $fname && -s _;
}
#
# This function is normally called below in read_a_line() when EOF is reached. Clients of the
# module may also call the function to close the file before EOF
#
sub close_file() {
if ( $currentfile ) {
close $currentfile;
my $arrayref = pop @includestack;
if ( $arrayref ) {
( $currentfile, $currentfilename, $currentlinenumber ) = @$arrayref;
} else {
$currentfile = undef;
}
}
}
#
# The following two functions allow module clients to nest opens. This happens frequently
# in the Actions module.
#
sub push_open( $ ) {
push @includestack, [ $currentfile, $currentfilename, $currentlinenumber ];
my @a = @includestack;
push @openstack, \@a;
@includestack = ();
$currentfile = undef;
open_file( $_[0] );
}
sub pop_open() {
@includestack = @{pop @openstack};
my $arrayref = pop @includestack;
if ( $arrayref ) {
( $currentfile, $currentfilename, $currentlinenumber ) = @$arrayref;
} else {
$currentfile = undef;
}
}
#
# Read a line from the current include stack.
#
# - Ignore blank or comment-only lines.
# - Remove trailing comments.
# - Handle Line Continuation
# - Expand shell variables from $ENV.
# - Handle INCLUDE <filename>
#
sub read_a_line {
while ( $currentfile ) {
$line = '';
while ( my $nextline = <$currentfile> ) {
$currentlinenumber++;
chomp $nextline;
#
# Continuation
#
if ( substr( ( $line .= $nextline ), -1, 1 ) eq '\\' ) {
$line = substr( $line, 0, -1 );
next;
}
$line =~ s/#.*$//; # Remove Trailing Comments -- result might be a blank line
#
# Ignore ( concatenated ) Blank Lines
#
if ( $line =~ /^\s*$/ ) {
$line = '';
next;
}
$line =~ s/^\s+//; # Remove Leading white space
$line =~ s/\s+$//; # Remove Trailing white space
#
# Expand Shell Variables using $ENV
#
$line = join( '', $1 , ( $ENV{$2} || '' ) , $3 ) while $line =~ /^(.*?)\${([a-zA-Z]\w*)}(.*)$/;
$line = join( '', $1 , ( $ENV{$2} || '' ) , $3 ) while $line =~ /^(.*?)\$([a-zA-Z]\w*)(.*)$/;
if ( $line =~ /^INCLUDE\s/ ) {
my @line = split /\s+/, $line;
fatal_error "Invalid INCLUDE command: $line" if @line != 2;
fatal_error "INCLUDEs nested too deeply: $line" if @includestack >= 4;
my $filename = find_file $line[1];
fatal_error "INCLUDE file $filename not found" unless ( -f $filename );
if ( -s _ ) {
push @includestack, [ $currentfile, $currentfilename, $currentlinenumber ];
$currentfile = undef;
do_open_file $filename;
}
$line = '';
} else {
return 1;
}
}
close_file;
}
}
#
# Provide the passed default value for the passed configuration variable
#
sub default ( $$ ) {
my ( $var, $val ) = @_;
$config{$var} = $val unless defined $config{$var} && $config{$var} ne '';
}
#
# Provide a default value for a yes/no configuration variable.
#
sub default_yes_no ( $$ ) {
my ( $var, $val ) = @_;
my $curval = "\L$config{$var}";
if ( defined $curval && $curval ne '' ) {
if ( $curval eq 'no' ) {
$config{$var} = '';
} else {
fatal_error "Invalid value for $var ($val)" unless $curval eq 'yes';
}
} else {
$config{$var} = $val;
}
}
my %validlevels = ( debug => 7,
info => 6,
notice => 5,
warning => 4,
warn => 4,
err => 3,
error => 3,
crit => 2,
alert => 1,
emerg => 0,
panic => 0,
none => '',
ULOG => 'ULOG' );
#
# Validate a log level -- Drop the trailing '!' that some fools think is important.
#
sub validate_level( $ ) {
my $level = $_[0];
if ( defined $level && $level ne '' ) {
$level =~ s/!$//;
my $value = $validlevels{$level};
return $value if defined $value;
return $level if $level =~ /^[0-7]$/;
fatal_error "Invalid log level ($level)";
}
'';
}
#
# Validate a log level and supply default
#
sub default_log_level( $$ ) {
my ( $level, $default ) = @_;
my $value = $config{$level};
unless ( defined $value && $value ne '' ) {
$config{$level} = $default;
} else {
$config{$level} = validate_level $value;
}
}
#
# Check a tri-valued variable
#
sub check_trivalue( $$ ) {
my ( $var, $default) = @_;
my $val = "\L$config{$var}";
if ( defined $val ) {
if ( $val eq 'yes' || $val eq 'on' ) {
$config{$var} = 'on';
} elsif ( $val eq 'no' || $val eq 'off' ) {
$config{$var} = 'off';
} elsif ( $val eq 'keep' ) {
$config{$var} = '';
} elsif ( $val eq '' ) {
$config{$var} = $default
} else {
fatal_error "Invalid value ( $val ) for $var";
}
} else {
$config{var} = $default
}
}
#
# Produce a report of the detected capabilities
#
sub report_capabilities() {
sub report_capability( $ ) {
my $cap = $_[0];
print " $capdesc{$cap}: ";
print $capabilities{$cap} ? "Available\n" : "Not Available\n";
}
print "Shorewall has detected the following capabilities:\n";
for my $cap ( sort { $capdesc{$a} cmp $capdesc{$b} } keys %capabilities ) {
report_capability $cap;
}
}
#
# Search the current PATH for the passed executable
#
sub mywhich( $ ) {
my $prog = $_[0];
for my $dir ( split /:/, $ENV{PATH} ) {
return "$dir/$prog" if -x "$dir/$prog";
}
'';
}
#
# Load the kernel modules defined in the 'modules' file.
#
sub load_kernel_modules( ) {
my $moduleloader = mywhich 'modprobe' ? 'modprobe' : 'insmod';
my $modulesdir = $config{MODULESDIR};
unless ( $modulesdir ) {
my $uname = `uname -r`;
fatal_error "The command 'uname -r' failed" unless $? == 0;
chomp $uname;
$modulesdir = "/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter";
}
my @moduledirectories = split /:/, $modulesdir;
if ( @moduledirectories && open_file 'modules' ) {
my %loadedmodules;
progress_message "Loading Modules...";
open LSMOD , '-|', 'lsmod' or fatal_error "Can't run lsmod";
while ( $line = <LSMOD> ) {
my $module = ( split( /\s+/, $line ) )[0];
$loadedmodules{$module} = 1 unless $module eq 'Module'
}
close LSMOD;
$config{MODULE_SUFFIX} = 'o gz ko o.gz ko.gz' unless $config{MODULES_SUFFIX};
my @suffixes = split /\s+/ , $config{MODULE_SUFFIX};
while ( read_a_line ) {
fatal_error "Invalid modules file entry" unless ( $line =~ /^loadmodule\s+([a-zA-Z]\w*)\s*(.*)$/ );
my ( $module, $arguments ) = ( $1, $2 );
unless ( $loadedmodules{ $module } ) {
for my $directory ( @moduledirectories ) {
for my $suffix ( @suffixes ) {
my $modulefile = "$directory/$module.$suffix";
if ( -f $modulefile ) {
if ( $moduleloader eq 'insmod' ) {
system ("insmod $modulefile $arguments" );
} else {
system( "modprobe $module $arguments" );
}
$loadedmodules{ $module } = 1;
}
}
}
}
}
}
}
#
# Q[uie]t version of system(). Returns true for success
#
sub qt( $ ) {
system( "@_ > /dev/null 2>&1" ) == 0;
}
#
# Determine which optional facilities are supported by iptables/netfilter
#
sub determine_capabilities() {
my $iptables = $config{IPTABLES};
my $pid = $$;
my $sillyname = "fooX$pid";
$capabilities{NAT_ENABLED} = qt( "$iptables -t nat -L -n" );
$capabilities{MANGLE_ENABLED} = qt( "$iptables -t mangle -L -n" );
qt( "$iptables -N $sillyname" );
$capabilities{CONNTRACK_MATCH} = qt( "$iptables -A $sillyname -m conntrack --ctorigdst 192.168.1.1 -j ACCEPT" );
$capabilities{MULTIPORT} = qt( "$iptables -A $sillyname -p tcp -m multiport --dports 21,22 -j ACCEPT" );
$capabilities{XMULTIPORT} = qt( "$iptables -A $sillyname -p tcp -m multiport --dports 21:22 -j ACCEPT" );
$capabilities{POLICY_MATCH} = qt( "$iptables -A $sillyname -m policy --pol ipsec --mode tunnel --dir in -j ACCEPT" );
$capabilities{PHYSDEV_MATCH} = qt( "$iptables -A $sillyname -m physdev --physdev-in eth0 -j ACCEPT" );
if ( qt( "$iptables -A $sillyname -m iprange --src-range 192.168.1.5-192.168.1.124 -j ACCEPT" ) ) {
$capabilities{IPRANGE_MATCH} = 1;
unless ( $capabilities{KLUDGEFREE} ) {
$capabilities{KLUDGEFREE} = qt( "$iptables -A $sillyname -m iprange --src-range 192.168.1.5-192.168.1.124 -m iprange --dst-range 192.168.1.5-192.168.1.124 -j ACCEPT" );
}
}
$capabilities{RECENT_MATCH} = qt( "$iptables -A $sillyname -m recent --update -j ACCEPT" );
$capabilities{OWNER_MATCH} = qt( "$iptables -A $sillyname -m owner --uid-owner 0 -j ACCEPT" );
if ( qt( "$iptables -A $sillyname -m connmark --mark 2 -j ACCEPT" )) {
$capabilities{CONNMARK_MATCH} = 1;
$capabilities{XCONNMARK_MATCH} = qt( "$iptables -A $sillyname -m connmark --mark 2/0xFF -j ACCEPT" );
}
$capabilities{IPP2P_MATCH} = qt( "$iptables -A $sillyname -p tcp -m ipp2p --ipp2p -j ACCEPT" );
$capabilities{LENGTH_MATCH} = qt( "$iptables -A $sillyname -m length --length 10:20 -j ACCEPT" );
$capabilities{ENHANCED_REJECT} = qt( "$iptables -A $sillyname -j REJECT --reject-with icmp-host-prohibited" );
$capabilities{COMMENTS} = qt( qq($iptables -A $sillyname -j ACCEPT -m comment --comment "This is a comment" ) );
if ( $capabilities{MANGLE_ENABLED} ) {
qt( "$iptables -t mangle -N $sillyname" );
if ( qt( "$iptables -t mangle -A $sillyname -j MARK --set-mark 1" ) ) {
$capabilities{MARK} = 1;
$capabilities{XMARK} = qt( "$iptables -t mangle -A $sillyname -j MARK --and-mark 0xFF" );
}
if ( qt( "$iptables -t mangle -A $sillyname -j CONNMARK --save-mark" ) ) {
$capabilities{CONNMARK} = 1;
$capabilities{XCONNMARK} = qt( "$iptables -t mangle -A $sillyname -j CONNMARK --save-mark --mask 0xFF" );
}
$capabilities{CLASSIFY_TARGET} = qt( "$iptables -t mangle -A $sillyname -j CLASSIFY --set-class 1:1" );
qt( "$iptables -t mangle -F $sillyname" );
qt( "$iptables -t mangle -X $sillyname" );
$capabilities{MANGLE_FORWARD} = qt( "$iptables -t mangle -L FORWARD -n" );
}
$capabilities{RAW_TABLE} = qt( "$iptables -t raw -L -n" );
if ( mywhich 'ipset' ) {
qt( "ipset -X $sillyname" );
if ( qt( "ipset -N $sillyname iphash" ) ) {
if ( qt( "$iptables -A $sillyname -m set --set $sillyname src -j ACCEPT" ) ) {
qt( "$iptables -D $sillyname -m set --set $sillyname src -j ACCEPT" );
$capabilities{IPSET_MATCH} = 1;
}
qt( "ipset -X $sillyname" );
}
}
$capabilities{USEPKTTYPE} = qt( "$iptables -A $sillyname -m pkttype --pkt-type broadcast -j ACCEPT" );
$capabilities{ADDRTYPE} = qt( "$iptables -A $sillyname -m addrtype --src-type BROADCAST -j ACCEPT" );
qt( "$iptables -F $sillyname" );
qt( "$iptables -X $sillyname" );
}
#
# Require the passed capability
#
sub require_capability( $$$ ) {
my ( $capability, $description, $singular ) = @_;
fatal_error "$description require${singular} $capdesc{$capability} in your kernel and iptables"
unless $capabilities{$capability};
}
#
# Set default config path
#
sub ensure_config_path( $ ) {
my $export = $_[0];
my $f = "$globals{SHAREDIR}/configpath";
$globals{CONFDIR} = '/usr/share/shorewall/configfiles/' if $export || $> != 0;
unless ( $config{CONFIG_PATH} ) {
fatal_error "$f does not exist" unless -f $f;
open_file $f;
while ( read_a_line ) {
if ( $line =~ /^\s*([a-zA-Z]\w*)=(.*?)\s*$/ ) {
my ($var, $val) = ($1, $2);
$config{$var} = ( $val =~ /\"([^\"]*)\"$/ ? $1 : $val ) if exists $config{$var};
} else {
fatal_error "Unrecognized entry";
}
}
fatal_error "CONFIG_PATH not found in $f" unless $config{CONFIG_PATH};
}
@config_path = split /:/, $config{CONFIG_PATH};
for ( @config_path ) {
$_ .= '/' unless m|//$|;
}
if ( my $sd = $ENV{SHOREWALL_DIR} ) {
$sd .= '/' unless $sd =~ m|//$|;
unshift @config_path, $sd if $sd ne $config_path[0];
}
}
#
# - Read the shorewall.conf file
# - Read the capabilities file, if any
# - establish global hashes %config , %globals and %capabilities
#
sub get_configuration( $ ) {
my $export = $_[0];
ensure_config_path( $export );
my $file = find_file 'shorewall.conf';
if ( -f $file ) {
if ( -r _ ) {
open_file $file;
while ( read_a_line ) {
if ( $line =~ /^\s*([a-zA-Z]\w*)=(.*?)\s*$/ ) {
my ($var, $val) = ($1, $2);
unless ( exists $config{$var} ) {
warning_message "Unknown configuration option ($var) ignored";
next;
}
$config{$var} = ( $val =~ /\"([^\"]*)\"$/ ? $1 : $val );
} else {
fatal_error "Unrecognized entry";
}
}
} else {
fatal_error "Cannot read $file (Hint: Are you root?)";
}
} else {
fatal_error "$file does not exist!";
}
ensure_config_path( $export );
default 'PATH' , '/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin';
default 'MODULE_PREFIX', 'o gz ko o.gz ko.gz';
if ( ! $export && $> == 0 ) { # $> == $EUID
unless ( $config{IPTABLES} ) {
$config{IPTABLES} = mywhich 'iptables';
fatal_error "Can't find iptables executable" unless $config{IPTABLES};
} else {
fatal_error "\$IPTABLES=$config{IPTABLES} does not exist or is not executable" unless -x $config{IPTABLES};
}
load_kernel_modules;
unless ( open_file 'capabilities' ) {
determine_capabilities;
}
} elsif ( $export ) {
open_file 'capabilities' or fatal_error "The -e flag requires a capabilities file";
} else {
open_file 'capabilities' or fatal_error "Compiling under an ordinary user id requires a capabilities file";
}
#
# If we successfully called open_file above, then this loop will read the capabilities file.
# Otherwise, the first call to read_a_line() below will return false
#
while ( read_a_line ) {
if ( $line =~ /^([a-zA-Z]\w*)=(.*)$/ ) {
my ($var, $val) = ($1, $2);
unless ( exists $capabilities{$var} ) {
warning_message "Unknown capability ($var) ignored";
next;
}
$capabilities{$var} = $val =~ /^\"([^\"]*)\"$/ ? $1 : $val;
} else {
fatal_error "Unrecognized capabilities entry";
}
}
$globals{ORIGINAL_POLICY_MATCH} = $capabilities{POLICY_MATCH};
if ( $config{LOGRATE} || $config{LOGBURST} ) {
$globals{LOGLIMIT} = '-m limit ';
$globals{LOGLIMIT} .= "--limit $config{LOGRATE} " if $config{LOGRATE};
$globals{LOGLIMIT} .= "--limit-burst $config{LOGBURST} " if $config{LOGBURST};
} else {
$globals{LOGLIMIT} = '';
}
check_trivalue ( 'IP_FORWARDING', 'on' );
check_trivalue ( 'ROUTE_FILTER', '' );
check_trivalue ( 'LOG_MARTIANS', '' );
default_yes_no 'ADD_IP_ALIASES' , 'Yes';
default_yes_no 'ADD_SNAT_ALIASES' , '';
default_yes_no 'DETECT_DNAT_IPADDRS' , '';
default_yes_no 'DETECT_DNAT_IPADDRS' , '';
default_yes_no 'CLEAR_TC' , 'Yes';
if ( defined $config{CLAMPMSS} ) {
default_yes_no 'CLAMPMSS' , '' unless $config{CLAMPMSS} =~ /^\d+$/;
} else {
$config{CLAMPMSS} = '';
}
unless ( $config{ADD_IP_ALIASES} || $config{ADD_SNAT_ALIASES} ) {
$config{RETAIN_ALIASES} = '';
} else {
default_yes_no 'RETAIN_ALIASES' , '';
}
default_yes_no 'ADMINISABSENTMINDED' , '';
default_yes_no 'BLACKLISTNEWONLY' , '';
default_yes_no 'DISABLE_IPV6' , '';
default_yes_no 'DYNAMIC_ZONES' , '';
fatal_error "DYNAMIC_ZONES=Yes is incompatible with the -e option" if $config{DYNAMIC_ZONES} && $export;
default_yes_no 'BRIDGING' , '';
fatal_error 'BRIDGING=Yes is not supported by Shorewall-perl' . $globals{VERSION} if $config{BRIDGING};
default_yes_no 'STARTUP_ENABLED' , 'Yes';
default_yes_no 'DELAYBLACKLISTLOAD' , '';
warning_message 'DELAYBLACKLISTLOAD=Yes is not supported by Shorewall-perl ' . $globals{VERSION} if $config{DELAYBLACKLISTLOAD};
default_yes_no 'LOGTAGONLY' , '';
default_yes_no 'RFC1918_STRICT' , '';
default_yes_no 'SAVE_IPSETS' , '';
warning_message 'SAVE_IPSETS=Yes is not supported by Shorewall-perl ' . $globals{VERSION} if $config{SAVE_IPSETS};
default_yes_no 'MAPOLDACTIONS' , '';
warning_message 'MAPOLDACTIONS=Yes is not supported by Shorewall-perl ' . $globals{VERSION} if $config{MAPOLDACTIONS};
default_yes_no 'FASTACCEPT' , '';
fatal_error "BLACKLISTNEWONLY=No may not be specified with FASTACCEPT=Yes" if $config{FASTACCEPT} && ! $config{BLACKLISTNEWONLY};
default_yes_no 'IMPLICIT_CONTINUE' , '';
default_yes_no 'HIGH_ROUTE_MARKS' , '';
default_yes_no 'TC_EXPERT' , '';
default_yes_no 'USE_ACTIONS' , 'Yes';
warning_message 'USE_ACTIONS=No is not supported by Shorewall-perl ' . $globals{VERSION} unless $config{USE_ACTIONS};
default_yes_no 'EXPORTPARAMS' , '';
default_yes_no 'MARK_IN_FORWARD_CHAIN' , '';
$capabilities{XCONNMARK} = '' unless $capabilities{XCONNMARK_MATCH} and $capabilities{XMARK};
default 'BLACKLIST_DISPOSITION' , 'DROP';
default_log_level 'BLACKLIST_LOGLEVEL', '';
default_log_level 'MACLIST_LOG_LEVEL', '';
default_log_level 'TCP_FLAGS_LOG_LEVEL', '';
default_log_level 'RFC1918_LOG_LEVEL', 6;
default_log_level 'SMURF_LOG_LEVEL', '';
default_log_level 'LOGALLNEW', '';
my $val;
$globals{MACLIST_TARGET} = 'reject';
if ( $val = $config{MACLIST_DISPOSITION} ) {
unless ( $val eq 'REJECT' ) {
if ( $val eq 'DROP' ) {
$globals{MACLIST_TARGET} = 'DROP';
} elsif ( $val eq 'ACCEPT' ) {
$globals{MACLIST_TARGET} = 'RETURN';
} else {
fatal_error "Invalid value ( $config{MACLIST_DISPOSITION} ) for MACLIST_DISPOSITION"
}
}
} else {
$config{MACLIST_DISPOSITION} = 'REJECT';
}
if ( $val = $config{MACLIST_TABLE} ) {
if ( $val eq 'mangle' ) {
fatal_error 'MACLIST_DISPOSITION=REJECT is not allowed with MACLIST_TABLE=mangle' if $config{MACLIST_DISPOSITION} eq 'REJECT';
} else {
fatal_error "Invalid value ($val) for MACLIST_TABLE option" unless $val eq 'filter';
}
} else {
default 'MACLIST_TABLE' , 'filter';
}
if ( $val = $config{TCP_FLAGS_DISPOSITION} ) {
fatal_error "Invalid value ($config{TCP_FLAGS_DISPOSITION}) for TCP_FLAGS_DISPOSITION" unless $val =~ /^(REJECT|ACCEPT|DROP)$/;
} else {
$config{TCP_FLAGS_DISPOSITION} = 'DROP';
}
default 'TC_ENABLED' , 'Internal';
$val = "\L$config{TC_ENABLED}";
if ( $val eq 'yes' ) {
$file = find_file 'tcstart';
fatal_error "Unable to find tcstart file" unless -f $file;
$globals{TC_SCRIPT} = $file;
} elsif ( $val ne 'internal' ) {
fatal_error "Invalid value ($config{TC_ENABLED}) for TC_ENABLED" unless $val eq 'no';
$config{TC_ENABLED} = '';
}
default 'RESTOREFILE' , 'restore';
default 'DROP_DEFAULT' , 'Drop';
default 'REJECT_DEFAULT' , 'Reject';
default 'QUEUE_DEFAULT' , 'none';
default 'ACCEPT_DEFAULT' , 'none';
default 'OPTIMIZE' , 0;
default 'IPSECFILE' , 'zones';
fatal_error 'IPSECFILE=ipsec is not supported by Shorewall-perl ' . $globals{VERSION} unless $config{IPSECFILE} eq 'zones';
for my $default qw/DROP_DEFAULT REJECT_DEFAULT QUEUE_DEFAULT ACCEPT_DEFAULT/ {
$config{$default} = 'none' if "\L$config{$default}" eq 'none';
}
$val = $config{OPTIMIZE};
fatal_error "Invalid OPTIMIZE value ($val)" unless ( $val eq '0' ) || ( $val eq '1' );
fatal_error "Invalid IPSECFILE value ($config{IPSECFILE}" unless $config{IPSECFILE} eq 'zones';
$globals{MARKING_CHAIN} = $config{MARK_IN_FORWARD_CHAIN} ? 'tcfor' : 'tcpre';
if ( $val = $config{LOGFORMAT} ) {
my $result;
eval {
if ( $val =~ /%d/ ) {
$globals{LOGRULENUMBERS} = 'Yes';
$result = sprintf "$val", 'fooxx2barxx', 1, 'ACCEPT';
} else {
$result = sprintf "$val", 'fooxx2barxx', 'ACCEPT';
}
};
fatal_error "Invalid LOGFORMAT ($val)" if $@;
fatal_error "LOGFORMAT string is longer than 29 characters: \"$val\"" if length $result > 29;
$globals{MAXZONENAMELENGTH} = int ( 5 + ( ( 29 - (length $result ) ) / 2) );
} else {
$config{LOGFORMAT}='Shorewall:%s:%s:';
$globals{MAXZONENAMELENGTH} = 5;
}
if ( $config{LOCKFILE} ) {
my ( $file, $dir, $suffix );
eval {
( $file, $dir, $suffix ) = fileparse( $config{LOCKFILE} );
};
die $@ if $@;
fatal_error "LOCKFILE=$config{LOCKFILE}: Directory $dir does not exist" unless -d $dir;
} else {
$config{LOCKFILE} = '';
}
open_file '/etc/protocols' or fatal_error "Cannot open /etc/protocols: $!";
while ( read_a_line ) {
my ( $proto1, $number, $proto2, $proto3 ) = split_line( 2, 4, '/etc/protocols entry');
$protocols{ $proto1 } = $number;
$protocols{ $proto2 } = $number unless $proto2 eq '-' || $proto3 ne '-';
}
open_file '/etc/services' or fatal_error "Cannot open /etc/services: $!";
while ( read_a_line ) {
my ( $name1, $proto_number, @names ) = split_line( 2, 10, '/etc/services entry');
my ( $number, $proto ) = split '/', $proto_number;
$services{ $name1 } = $number;
while ( defined ( $name1 = shift @names ) && $name1 ne '-' ) {
$services{ $name1 } = $number;
}
}
}
#
# The values of the options in @Shorewall:Config::propagateconfig are copied to the object file in OPTION=<value> format.
#
sub propagateconfig() {
for my $option ( @Shorewall::Config::propagateconfig ) {
my $value = $config{$option} || '';
emit "$option=\"$value\"";
}
for my $option ( @Shorewall::Config::propagateenv ) {
my $value = $globals{$option} || '';
emit "$option=\"$value\"";
}
}
#
# Add a shell script file to the output script
#
sub append_file( $ ) {
my $user_exit = find_file $_[0];
unless ( $user_exit =~ /$globals{SHAREDIR}/ ) {
if ( -f $user_exit ) {
save_progress_message "Processing $user_exit ...";
copy1 $user_exit;
}
}
}
#
# Run a Perl extension script
#
sub run_user_exit( $ ) {
my $chainref = $_[0];
my $file = find_file $chainref->{name};
if ( -f $file ) {
progress_message "Processing $file...";
unless (my $return = eval `cat $file`) {
fatal_error "Couldn't parse $file: $@" if $@;
fatal_error "Couldn't do $file: $!" unless defined $return;
fatal_error "Couldn't run $file" unless $return;
}
}
}
#
# Generate the aux config file for Shorewall Lite
#
sub generate_aux_config() {
sub conditionally_add_option( $ ) {
my $option = $_[0];
my $value = $config{$option};
emit "[ -n \"\${$option:=$value}\" ]" if $value ne '';
}
sub conditionally_add_option1( $ ) {
my $option = $_[0];
my $value = $config{$option};
emit "$option=\"$value\"" if $value;
}
create_temp_aux_config;
emit join ( '', "#\n# Shorewall auxiliary configuration file created by Shorewall-perl version ", $globals{VERSION}, ' - ' , localtime , "\n#" );
for my $option qw(VERBOSITY LOGFILE LOGFORMAT IPTABLES PATH SHOREWALL_SHELL SUBSYSLOCK LOCKFILE RESTOREFILE SAVE_IPSETS) {
conditionally_add_option $option;
}
conditionally_add_option1 'TC_ENABLED';
finalize_aux_config;
}
1;
View Git Blame Copy Permalink