holm/shorewall_code
1
0
Fork 0
forked from extern/shorewall_code
Code Pull Requests Activity
24e21e730e
shorewall_code/docs/SharedConfig.xml
Tom Eastep 9869dd25d7
Correct capitalization of IPsec 
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2018-02-09 11:20:22 -08:00

1073 lines
37 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<article>
<!--mangle$Id$-->
<articleinfo>
<title>Shared Shorewall and Shorewall6 Configuration</title>
<authorgroup>
<author>
<firstname>Tom</firstname>
<surname>Eastep</surname>
</author>
</authorgroup>
<pubdate><?dbtimestamp format="Y/m/d"?></pubdate>
<copyright>
<year>2017</year>
<holder>Thomas M. Eastep</holder>
</copyright>
<legalnotice>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation
License</ulink></quote>.</para>
</legalnotice>
</articleinfo>
<section>
<title>Introduction</title>
<para>Netfilter separates management of IPv4 and IPv6 configurations. Each
address family has its own utility (iptables and ip6tables), and changes
made to the configuration of one address family do not affect the other.
While Shorewall also separates the address families in this way, it is
possible for Shorewall and Shorewall6 to share almost all of the
configuration files. This article gives an example.</para>
<caution>
<para>What is shown here currently works best with Debian and
derivatives, or when the tarball installer is used and the SPARSE option
is enabled when running configure[.pl].</para>
</caution>
</section>
<section>
<title>Environment</title>
<para>In this example, each address family has two Internet interfaces.
Both address families share a fast uplink (eth0) that has a single public
IPv4 address, but can delegate IPv6 subnets to the Shorewall-based router.
Both address families also have a production uplink. For IPv4, Ethernet is
used (eth1) and supports the public IPv4 subnet 70.90.191.120/29. For
IPv6, a Hurricane Electric 6in4 tunnel is used (sit1), which provides the
public IPv6 subnet 2001:470:b:227::/64. The router also has two bridges. A
DMZ bridge (br0) provides access to containers running a web server, a
mail exchanger, and an IMAPS mail access server. The second bridge (br1)
provides access to a container running irssi under screen, allowing
constant access to and monitoring of IRC channels.</para>
<para>Here is a diagram of this installation:</para>
<graphic fileref="images/Network2017.png"/>
</section>
<section>
<title>Configuration</title>
<para>Here are the contents of /etc/shorewall/ and /etc/shorewal6/:</para>
<programlisting>root@gateway:~# ls -l /etc/shorewall/
total 92
-rw-r--r-- 1 root root 201 Mar 19 2017 action.Mirrors
-rw-r--r-- 1 root root 109 Oct 20 09:18 actions
-rw-r--r-- 1 root root 654 Oct 13 13:46 conntrack
-rw-r--r-- 1 root root 104 Oct 13 13:21 hosts
-rw-r--r-- 1 root root 867 Jul 1 10:50 interfaces
-rw-r--r-- 1 root root 107 Jun 29 15:14 isusable
-rw-r--r-- 1 root root 240 Oct 13 13:34 macro.FTP
-rw-r--r-- 1 root root 559 Oct 19 12:56 mangle
-rw-r--r-- 1 root root 1290 Jun 29 15:16 mirrors
-rw-r--r-- 1 root root 2687 Oct 15 14:20 params
-rw-r--r-- 1 root root 738 Oct 15 12:16 policy
-rw-r--r-- 1 root root 1838 Oct 11 08:29 providers
-rw-r--r-- 1 root root 398 Mar 18 2017 proxyarp
-rw-r--r-- 1 root root 738 Nov 8 09:34 routes
-rw-r--r-- 1 root root 729 Nov 7 12:52 rtrules
-rw-r--r-- 1 root root 6367 Oct 13 13:21 rules
-rw-r--r-- 1 root root 5520 Oct 19 10:01 shorewall.conf
-rw-r--r-- 1 root root 1090 Oct 25 15:17 snat
-rw-r--r-- 1 root root 181 Jun 29 15:12 started
-rw-r--r-- 1 root root 435 Oct 13 13:21 tunnels
-rw-r--r-- 1 root root 941 Oct 15 11:27 zones
root@gateway:~# ls -l /etc/shorewall6/
total 8
lrwxrwxrwx 1 root root 20 Jul 6 16:35 mirrors -&gt; ../shorewall/mirrors
lrwxrwxrwx 1 root root 19 Jul 6 12:48 params -&gt; ../shorewall/params
-rw-r--r-- 1 root root 5332 Oct 14 11:53 shorewall6.conf
root@gateway:~#
</programlisting>
<para>The various configuration files are described in the sections that
follow. Note that in all cases, these files use the <ulink
url="/configuration_file_basics.htm#Pairs">alternate format for column
specification</ulink>.</para>
<section>
<title>/usr/share/shorewall/shorewallrc</title>
<para>The key setting here is SPARSE=Very</para>
<programlisting>#
# Created by Shorewall Core version 5.0.12-RC1 configure.pl - Sep 25 2016 09:30:55
# rc file: shorewallrc.debian.systemd
#
HOST=debian
PREFIX=/usr
SHAREDIR=${PREFIX}/share
LIBEXECDIR=${PREFIX}/share
PERLLIBDIR=${PREFIX}/share/shorewall
CONFDIR=/etc
SBINDIR=/sbin
MANDIR=${PREFIX}/share/man
INITDIR=
INITSOURCE=init.debian.sh
INITFILE=
AUXINITSOURCE=
AUXINITFILE=
SERVICEDIR=/lib/systemd/system
SERVICEFILE=$PRODUCT.service.debian
SYSCONFFILE=default.debian
SYSCONFDIR=/etc/default
SPARSE=Very
ANNOTATED=
VARLIB=/var/lib
VARDIR=${VARLIB}/$PRODUCT
DEFAULT_PAGER=/usr/bin/less
</programlisting>
</section>
<section>
<title>shorewall.conf and shorewall6.conf</title>
<para>These are the only files that are not shared between the two
address families. The key setting is CONFIG_PATH in
shorewall6.conf:</para>
<programlisting>CONFIG_PATH="<emphasis role="bold">${CONFDIR}/shorewall6:${CONFDIR}/shorewall:</emphasis>/usr/share/shorewall6:${SHAREDIR}/shorewall"</programlisting>
<para><filename>/etc/shorewall6/</filename> is only used for processing
the <filename>params</filename> and <filename>shorewall6.conf</filename>
files.</para>
<section>
<title>shorewall.conf</title>
<para>The contents of /etc/shorewall/shorewall.conf are as
follows:</para>
<programlisting>###############################################################################
#
# Shorewall Version 5 -- /etc/shorewall/shorewall.conf
#
# For information about the settings in this file, type "man shorewall.conf"
#
# Manpage also online at http://www.shorewall.net/manpages/shorewall.conf.html
###############################################################################
# S T A R T U P E N A B L E D
###############################################################################
STARTUP_ENABLED=Yes
###############################################################################
# V E R B O S I T Y
###############################################################################
VERBOSITY=1
###############################################################################
# P A G E R
###############################################################################
PAGER=pager
###############################################################################
# F I R E W A L L
###############################################################################
FIREWALL=
###############################################################################
# L O G G I N G
###############################################################################
LOG_LEVEL="NFLOG(0,64,1)"
BLACKLIST_LOG_LEVEL="none"
INVALID_LOG_LEVEL=
LOG_BACKEND=netlink
LOG_MARTIANS=Yes
LOG_VERBOSITY=1
LOGALLNEW=
LOGFILE=/var/log/ulogd/ulogd.syslogemu.log
LOGFORMAT=": %s %s"
LOGTAGONLY=Yes
LOGLIMIT="s:5/min"
MACLIST_LOG_LEVEL="$LOG_LEVEL"
RELATED_LOG_LEVEL="$LOG_LEVEL:,related"
RPFILTER_LOG_LEVEL="$LOG_LEVEL:,rpfilter"
SFILTER_LOG_LEVEL="$LOG_LEVEL"
SMURF_LOG_LEVEL="$LOG_LEVEL"
STARTUP_LOG=/var/log/shorewall-init.log
TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
UNTRACKED_LOG_LEVEL=
###############################################################################
# L O C A T I O N O F F I L E S A N D D I R E C T O R I E S
###############################################################################
ARPTABLES=
CONFIG_PATH="/etc/shorewall:/usr/share/shorewall:/usr/share/shorewall/Shorewall"
GEOIPDIR=/usr/share/xt_geoip/LE
IPTABLES=/sbin/iptables
IP=/sbin/ip
IPSET=
LOCKFILE=/var/lib/shorewall/lock
MODULESDIR="+extra/RTPENGINE"
NFACCT=
PATH="/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin"
PERL=/usr/bin/perl
RESTOREFILE=
SHOREWALL_SHELL=/bin/sh
SUBSYSLOCK=
TC=
###############################################################################
# D E F A U L T A C T I O N S / M A C R O S
###############################################################################
ACCEPT_DEFAULT="none"
BLACKLIST_DEFAULT="NotSyn(DROP):$LOG_LEVEL"
DROP_DEFAULT="Broadcast(DROP),Multicast(DROP)"
NFQUEUE_DEFAULT="none"
QUEUE_DEFAULT="none"
REJECT_DEFAULT="Broadcast(DROP),Multicast(DROP)"
###############################################################################
# R S H / R C P C O M M A N D S
###############################################################################
RCP_COMMAND='scp ${files} ${root}@${system}:${destination}'
RSH_COMMAND='ssh ${root}@${system} ${command}'
###############################################################################
# F I R E W A L L O P T I O N S
###############################################################################
ACCOUNTING=Yes
ACCOUNTING_TABLE=mangle
ADD_IP_ALIASES=No
ADD_SNAT_ALIASES=No
ADMINISABSENTMINDED=Yes
AUTOCOMMENT=Yes
AUTOHELPERS=No
AUTOMAKE=Yes
BALANCE_PROVIDERS=No
BASIC_FILTERS=No
BLACKLIST="NEW,INVALID,UNTRACKED"
CLAMPMSS=Yes
CLEAR_TC=Yes
COMPLETE=No
DEFER_DNS_RESOLUTION=No
DELETE_THEN_ADD=No
DETECT_DNAT_IPADDRS=No
DISABLE_IPV6=No
DOCKER=No
DONT_LOAD="nf_nat_sip,nf_conntrack_sip,nf_conntrack_h323,nf_nat_h323"
DYNAMIC_BLACKLIST="ipset-only,disconnect,timeout=7200"
EXPAND_POLICIES=Yes
EXPORTMODULES=Yes
FASTACCEPT=Yes
FORWARD_CLEAR_MARK=No
HELPERS="ftp,irc"
IGNOREUNKNOWNVARIABLES=No
IMPLICIT_CONTINUE=No
INLINE_MATCHES=Yes
IPSET_WARNINGS=Yes
IP_FORWARDING=Yes
KEEP_RT_TABLES=Yes
LOAD_HELPERS_ONLY=Yes
MACLIST_TABLE=filter
MACLIST_TTL=60
MANGLE_ENABLED=Yes
MAPOLDACTIONS=No
MARK_IN_FORWARD_CHAIN=No
MINIUPNPD=No
MULTICAST=No
MUTEX_TIMEOUT=60
NULL_ROUTE_RFC1918=unreachable
OPTIMIZE=All
OPTIMIZE_ACCOUNTING=No
PERL_HASH_SEED=12345
REJECT_ACTION=
REQUIRE_INTERFACE=No
RESTART=restart
RESTORE_DEFAULT_ROUTE=No
RESTORE_ROUTEMARKS=Yes
RETAIN_ALIASES=No
ROUTE_FILTER=No
SAVE_ARPTABLES=No
SAVE_IPSETS=ipv4
TC_ENABLED=No
TC_EXPERT=No
TC_PRIOMAP="2 3 3 3 2 3 1 1 2 2 2 2 2 2 2 2"
TRACK_PROVIDERS=Yes
TRACK_RULES=No
USE_DEFAULT_RT=Yes
USE_NFLOG_SIZE=Yes
USE_PHYSICAL_NAMES=Yes
USE_RT_NAMES=Yes
VERBOSE_MESSAGES=No
WARNOLDCAPVERSION=Yes
WORKAROUNDS=No
ZERO_MARKS=No
ZONE2ZONE=-
###############################################################################
# P A C K E T D I S P O S I T I O N
###############################################################################
BLACKLIST_DISPOSITION=DROP
INVALID_DISPOSITION=CONTINUE
MACLIST_DISPOSITION=ACCEPT
RELATED_DISPOSITION=REJECT
RPFILTER_DISPOSITION=DROP
SMURF_DISPOSITION=DROP
SFILTER_DISPOSITION=DROP
TCP_FLAGS_DISPOSITION=DROP
UNTRACKED_DISPOSITION=DROP
################################################################################
# P A C K E T M A R K L A Y O U T
################################################################################
TC_BITS=8
PROVIDER_BITS=2
PROVIDER_OFFSET=16
MASK_BITS=8
ZONE_BITS=0
</programlisting>
</section>
<section>
<title>shorewall6.conf</title>
<para>The contents of /etc/shorewall6/shorewall6.conf are:</para>
<programlisting>###############################################################################
#
# Shorewall Version 5 -- /etc/shorewall6/shorewall6.conf
#
# For information about the settings in this file, type "man shorewall6.conf"
#
# Manpage also online at
# http://www.shorewall.net/manpages6/shorewall6.conf.html
###############################################################################
# S T A R T U P E N A B L E D
###############################################################################
STARTUP_ENABLED=Yes
###############################################################################
# V E R B O S I T Y
###############################################################################
VERBOSITY=1
###############################################################################
# P A G E R
###############################################################################
PAGER=pager
###############################################################################
# F I R E W A L L
###############################################################################
FIREWALL=
###############################################################################
# L O G G I N G
###############################################################################
LOG_LEVEL="NFLOG(0,64,1)"
BLACKLIST_LOG_LEVEL="none"
INVALID_LOG_LEVEL=
LOG_BACKEND=netlink
LOG_VERBOSITY=2
LOGALLNEW=
LOGFILE=/var/log/ulogd/ulogd.syslogemu.log
LOGFORMAT="%s %s "
LOGLIMIT="s:5/min"
LOGTAGONLY=Yes
MACLIST_LOG_LEVEL="$LOG_LEVEL"
RELATED_LOG_LEVEL=
RPFILTER_LOG_LEVEL="$LOG_LEVEL"
SFILTER_LOG_LEVEL="$LOG_LEVEL"
SMURF_LOG_LEVEL="$LOG_LEVEL"
STARTUP_LOG=/var/log/shorewall6-init.log
TCP_FLAGS_LOG_LEVEL="$LOG_LEVEL"
UNTRACKED_LOG_LEVEL=
###############################################################################
# L O C A T I O N O F F I L E S A N D D I R E C T O R I E S
###############################################################################
CONFIG_PATH="${CONFDIR}/shorewall6:${CONFDIR}/shorewall:/usr/share/shorewall6:${SHAREDIR}/shorewall"
GEOIPDIR=/usr/share/xt_geoip/LE
IP6TABLES=
IP=
IPSET=
LOCKFILE=
MODULESDIR="+extra/RTPENGINE"
NFACCT=
PERL=/usr/bin/perl
PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin"
RESTOREFILE=restore
SHOREWALL_SHELL=/bin/sh
SUBSYSLOCK=/var/lock/subsys/shorewall6
TC=
###############################################################################
# D E F A U L T A C T I O N S / M A C R O S
###############################################################################
ACCEPT_DEFAULT="none"
BLACKLIST_DEFAULT="AllowICMPs,Broadcast(DROP),Multicast(DROP),dropNotSyn:$LOG_LEVEL,dropInvalid:$LOG_LEVEL,DropDNSrep:$LOG_LEVEL"
DROP_DEFAULT="AllowICMPs,Broadcast(DROP),Multicast(DROP)"
NFQUEUE_DEFAULT="none"
QUEUE_DEFAULT="none"
REJECT_DEFAULT="AllowICMPs,Broadcast(DROP),Multicast(DROP)"
###############################################################################
# R S H / R C P C O M M A N D S
###############################################################################
RCP_COMMAND='scp ${files} ${root}@${system}:${destination}'
RSH_COMMAND='ssh ${root}@${system} ${command}'
###############################################################################
# F I R E W A L L O P T I O N S
###############################################################################
ACCOUNTING=Yes
ACCOUNTING_TABLE=mangle
ADMINISABSENTMINDED=Yes
AUTOCOMMENT=Yes
AUTOHELPERS=No
AUTOMAKE=Yes
BALANCE_PROVIDERS=No
BASIC_FILTERS=No
BLACKLIST="NEW,INVALID,UNTRACKED"
CLAMPMSS=Yes
CLEAR_TC=No
COMPLETE=No
DEFER_DNS_RESOLUTION=Yes
DELETE_THEN_ADD=No
DONT_LOAD=
DYNAMIC_BLACKLIST="ipset-only,disconnect,timeout=7200"
EXPAND_POLICIES=Yes
EXPORTMODULES=Yes
FASTACCEPT=Yes
FORWARD_CLEAR_MARK=No
HELPERS=ftp
IGNOREUNKNOWNVARIABLES=No
IMPLICIT_CONTINUE=No
INLINE_MATCHES=No
IPSET_WARNINGS=Yes
IP_FORWARDING=Keep
KEEP_RT_TABLES=Yes
LOAD_HELPERS_ONLY=Yes
MACLIST_TABLE=filter
MACLIST_TTL=
MANGLE_ENABLED=Yes
MARK_IN_FORWARD_CHAIN=No
MINIUPNPD=No
MUTEX_TIMEOUT=60
OPTIMIZE=All
OPTIMIZE_ACCOUNTING=No
PERL_HASH_SEED=0
REJECT_ACTION=
REQUIRE_INTERFACE=No
RESTART=restart
RESTORE_DEFAULT_ROUTE=No
RESTORE_ROUTEMARKS=Yes
SAVE_IPSETS=No
TC_ENABLED=Shared
TC_EXPERT=No
TC_PRIOMAP="2 3 3 3 2 3 1 1 2 2 2 2 2 2 2 2"
TRACK_PROVIDERS=Yes
TRACK_RULES=No
USE_DEFAULT_RT=Yes
USE_NFLOG_SIZE=Yes
USE_PHYSICAL_NAMES=No
USE_RT_NAMES=No
VERBOSE_MESSAGES=No
WARNOLDCAPVERSION=Yes
WORKAROUNDS=No
ZERO_MARKS=No
ZONE2ZONE=-
###############################################################################
# P A C K E T D I S P O S I T I O N
###############################################################################
BLACKLIST_DISPOSITION=DROP
INVALID_DISPOSITION=CONTINUE
MACLIST_DISPOSITION=REJECT
RELATED_DISPOSITION=REJECT
SFILTER_DISPOSITION=DROP
RPFILTER_DISPOSITION=DROP
SMURF_DISPOSITION=DROP
TCP_FLAGS_DISPOSITION=DROP
UNTRACKED_DISPOSITION=DROP
################################################################################
# P A C K E T M A R K L A Y O U T
################################################################################
TC_BITS=8
PROVIDER_BITS=2
PROVIDER_OFFSET=8
MASK_BITS=8
ZONE_BITS=0
</programlisting>
</section>
</section>
<section>
<title>params</title>
<para>Because addresses and interfaces are different between the two
address families, they cannot be hard-coded in the configuration files.
<filename>/etc/shorewall/params</filename> is used to set shell
variables whose contents will vary between Shorewall and Shorewall6. In
the <filename>params</filename> file and in run-time extension files,
the shell variable <emphasis role="bold">g_family</emphasis> can be used
to determine which address family to use; if IPv4, then $g_family will
expand to 4 and if IPv6, $g_family will expand to 6.</para>
<para>The contents of /etc/shorewall/params is as follows:</para>
<programlisting>INCLUDE mirrors #Sets the MIRRORS variable for the Mirrors action
#
# Set compile-time variables depending on the address family
#
if [ $g_family = 4 ]; then
#
# IPv4 compilation
#
FALLBACK=Yes # Make FAST_IF the primary and PROD_IF the fallback interface
# See /etc/shorewall/providers
STATISTICAL=No # Don't use statistical load balancing
LISTS=70.90.191.124 # IP address of lists.shorewall.net (MX)
MAIL=70.90.191.122 # IP address of mail.shorewall.net (IMAPS)
SERVER=70.90.191.125 # IP address of www.shorewall.org
PROXY= # Use TPROXY for local web access
ALL=0.0.0.0/0 # Entire address space
LOC_ADDR=172.20.1.253 # IP address of the local LAN interface
FAST_GATEWAY=10.2.10.1 # Default gateway through the IF_FAST interface
FAST_MARK=0x20000 # Multi-ISP mark setting for IF_FAST
IPSECMSS=1460
#
# Interface Options
#
LOC_OPTIONS=dhcp,ignore=1,wait=5,routefilter,routeback,tcpflags=0,nodbl,physical=eth2
FAST_OPTIONS=optional,dhcp,tcpflags,logmartians,nosmurfs,sourceroute=0,arp_ignore=1,proxyarp=0,upnp,nosmurfs,physical=eth0
PROD_OPTIONS=optional,dhcp,tcpflags,logmartians,nosmurfs,sourceroute=0,arp_ignore=1,proxyarp=0,upnp,nosmurfs,physical=eth1
DMZ_OPTIONS=routeback,proxyarp=1,required,wait=30,nets=70.90.191.120/29,dhcp,nodbl,physical=br0
IRC_OPTIONS=routeback,proxyarp=1,required,wait=30,nets=172.20.2.0/24,dhcp,nodbl,physical=br1
else
#
# IPv6 compilation
#
FALLBACK=Yes # Make FAST_IF the primary and PROD_IF the fallback interface
# See /etc/shorewall/providers
STATISTICAL=No # Don't use statistical load balancing
LISTS=[2001:470:b:227::42] # IP address of lists.shorewall.net (MX and HTTPS)
MAIL=[2001:470:b:227::45] # IP address of mail.shorewall.net (IMAPS and HTTPS)
SERVER=[2001:470:b:227::43] # IP address of www.shorewall.org (HTTP, FTP and RSYNC)
PROXY=3 # Use TPROXY for local web access
ALL=[::]/0 # Entire address space
LOC_ADDR=[2601:601:a000:16f0::1] # IP address of the local LAN interface
FAST_GATEWAY=fe80::22e5:2aff:feb7:f2cf # Default gateway through the IF_FAST interface
FAST_MARK=0x100 # Multi-ISP mark setting for IF_FAST
IPSECMSS=1440
#
# Interface Options
#
PROD_OPTIONS=forward=1,optional,physical=sit1
FAST_OPTIONS=forward=1,optional,dhcp,upnp,physical=eth0
LOC_OPTIONS=forward=1,nodbl,routeback,physical=eth2
DMZ_OPTIONS=routeback,forward=1,required,wait=30,nodbl,physical=br0
IRC_OPTIONS=routeback,forward=1,required,wait=30,nodbl,physical=br1
fi</programlisting>
</section>
<section>
<title>zones</title>
<para>Here is the /etc/shorewall/zones file:</para>
<programlisting>###############################################################################
#ZONE TYPE OPTIONS IN OUT
# OPTIONS OPTIONS
#
# By using the 'ip' type, both Shorewall and Shorewall6 can share this file
#
fw { TYPE=firewall }
net { TYPE=ip }
loc { TYPE=ip }
dmz { TYPE=ip }
apps { TYPE=ip }
vpn { TYPE=ipsec, OPTIONS=mode=tunnel,proto=esp,mss=$IPSECMSS }
</programlisting>
</section>
<section>
<title>interfaces</title>
<para>/etc/shorewall/interfaces makes heavy use of variables set in
/etc/shorewall/params:</para>
<programlisting>#
# The two address families use different production interfaces and different
#
# LOC_IF is the local LAN for both families
# FAST_IF is a Comcast IPv6 beta uplink which is used for internet access from the local lan for both families
# PROD_IF is the interface used by shorewall.org servers
# For IPv4, it is eth1
# For IPv6, it is sit1 (Hurricane Electric 6in4 link)
# DMZ_IF is a bridge to the production containers
# IRC_IF is a bridge to a container that currently runs irssi under screen
loc { INTERFACE=LOC_IF, OPTIONS=$LOC_OPTIONS }
net { INTERFACE=FAST_IF, OPTIONS=$FAST_OPTIONS }
net { INTERFACE=PROD_IF, OPTIONS=$PROD_OPTIONS }
dmz { INTERFACE=DMZ_IF, OPTIONS=$DMZ_OPTIONS }
apps { INTERFACE=IRC_IF, OPTIONS=$IRC_OPTIONS }
</programlisting>
</section>
<section>
<title>hosts</title>
<para>/etc/shorewall/hosts is used to define the vpn zone:</para>
<programlisting>#ZONE HOSTS OPTIONS
vpn { HOSTS=PROD_IF:$ALL }
vpn { HOSTS=FAST_IF:$ALL }
vpn { HOSTS=LOC_IF:$ALL }
</programlisting>
</section>
<section>
<title>policy</title>
<para>The same set of policies apply to both address families:</para>
<programlisting>#SOURCE DEST POLICY LOGLEVEL RATE
$FW { DEST=dmz,net, POLICY=REJECT, LOGLEVEL=$LOG_LEVEL }
$FW { DEST=all, POLICY=ACCEPT }
loc { DEST=net, POLICY=ACCEPT }
loc,vpn,apps { DEST=loc,vpn,apps POLICY=ACCEPT }
loc { DEST=fw, POLICY=REJECT, LOGLEVEL=$LOG_LEVEL }
net { DEST=net, POLICY=NONE }
net { DEST=fw, POLICY=BLACKLIST:+Broadcast(DROP),Multicast(DROP),DropDNSrep:$LOG_LEVEL, LOGLEVEL=$LOG_LEVEL, RATE=8/sec:30 }
net { DEST=all, POLICY=BLACKLIST:+DropDNSrep:$LOG_LEVEL, LOGLEVEL=$LOG_LEVEL, RATE=8/sec:30 }
dmz { DEST=fw, POLICY=REJECT, LOGLEVEL=$LOG_LEVEL }
all { DEST=all, POLICY=REJECT, LOGLEVEL=$LOG_LEVEL }
</programlisting>
</section>
<section>
<title>providers</title>
<para>The providers file is set up to allow for three different
configurations:</para>
<orderedlist>
<listitem>
<para>FALLBACK -- FAST_IF is the primary interface and PROD_IF is
the fallback</para>
</listitem>
<listitem>
<para>STATISTICAL -- Statistical load balancing between FAST_IF and
PROD_IF</para>
</listitem>
<listitem>
<para>IPv4 only -- balance between FAST_IF and PROD_IF</para>
</listitem>
</orderedlist>
<programlisting>#
# This could be cleaned up a bit, but I'm leaving it as is for now
#
# - The two address families use different fw mark geometry
# - The two address families use different fallback interfaces
# - The 'balance' option doesn't work as expected in IPv6 so I have no balance configuration for Shorewall6
# - IPv4 uses the 'loose' option on PROD_IF
#
?if $FALLBACK
# FAST_IF is primary, PROD_IF is fallback
#
?info Compiling with FALLBACK
IPv6Beta { NUMBER=1, MARK=$FAST_MARK, INTERFACE=FAST_IF, GATEWAY=$FAST_GATEWAY, OPTIONS=loose,primary,persistent,noautosrc }
?if __IPV4
ComcastB { NUMBER=4, MARK=0x10000, INTERFACE=PROD_IF, GATEWAY=10.1.10.1, OPTIONS=loose,fallback,persistent }
?else
HE { NUMBER=2, MARK=0x200, INTERFACE=PROD_IF, OPTIONS=fallback,persistent }
?endif
?elsif $STATISTICAL
# Statistically balance traffic between FAST_IF and PROD_IF
?info Compiling with STATISTICAL
?if __IPV4
IPv6Beta { NUMBER=1, MARK=0x20000, INTERFACE=FAST_IF, GATEWAY=$FAST_GATEWAY, OPTIONS=loose,load=0.66666667,primary }
?else
HE { NUMBER=2, MARK=0x200, INTERFACE=PROD_IF, OPTIONS=track,load=0.33333333,persistent }
?endif
?else
?INFO Compiling with BALANCE
IPv6Beta { NUMBER=1, MARK=0x100, INTERFACE=eth0, GATEWAY=$FAST_GATEWAY, OPTIONS=track,balance=2,loose,persistent }
?if __IPV4
ComcastB { NUMBER=4, MARK=0x10000, INTERFACE=IPV4_IF, GATEWAY=10.1.10.1, OPTIONS=nohostroute,loose,balance,persistent }
?else
?warning No BALANCE IPv6 configuration
HE { NUMBER=2, MARK=0x200, INTERFACE=PROD_IF, OPTIONS=fallback,persistent }
?endif
?endif
Tproxy { NUMBER=3, INTERFACE=lo, OPTIONS=tproxy }
</programlisting>
</section>
<section>
<title>rtrules</title>
<para>The routing rules are quite dependent on the address
family:</para>
<programlisting>#SOURCE DEST PROVIDER PRIORITY
#
# This file ensures that the DMZ is routed out of the IF_PROD interface
# and that the IPv6 subnets delegated by the Beta router are routed out
# of the IF_FAST interface.
#
?if __IPV4
{ SOURCE=70.90.191.121,70.90.191.123,10.1.10.1 PROVIDER=ComcastB, PRIORITY=1000! }
{ SOURCE=&amp;FAST_IF, PROVIDER=IPv6Beta, PRIORITY=1000! }
{ SOURCE=br0, PROVIDER=ComcastB, PRIORITY=11000 }
?else
{ SOURCE=2601:601:a000:1600::/64 PROVIDER=IPv6Beta, PRIORITY=1000! }
{ SOURCE=2001:470:B:227::/64, PROVIDER=HE, PRIORITY=1000! }
{ SOURCE=2601:601:a000:16f0::/60 PROVIDER=IPv6Beta, PRIORITY=11000 }
?endif</programlisting>
</section>
<section>
<title>routes</title>
<para>This file is used only for IPv6:</para>
<programlisting>#PROVIDER DEST GATEWAY DEVICE OPTIONS
?if __IPV6
#
# In my version of FOOLSM (1.0.10), the 'sourceip' option doesn't work.
# As a result, routing rules that specify the source IPv6 address are
# not effective in routing the 'ping' request packets out of FAST_IF.
# The following route solves that problem.
#
{ PROVIDER=main, DEST=2001:558:4082:d3::1/128, GATEWAY=fe80::22e5:2aff:feb7:f2cf, DEVICE=FAST_IF, OPTIONS=persistent }
?endif</programlisting>
</section>
<section>
<title>actions</title>
<para>/etc/shorewall/actions defines one action:</para>
<programlisting>#ACTION COMMENT
Mirrors # Accept traffic from Shorewall Mirrors
</programlisting>
<para>/etc/shorewall/action.Mirrors:</para>
<programlisting>#TARGET SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE
# PORT PORT(S) DEST LIMIT
?COMMENT Accept traffic from Mirrors
?FORMAT 2
DEFAULTS -
$1 $MIRRORS
</programlisting>
</section>
<section>
<title>Macros</title>
<para>/etc/shorewall/macro.FTP:</para>
<programlisting>###############################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER
PARAM - - tcp 21
</programlisting>
<para>This is just the normal Shorewall FTP macro without the helper
logic -- we take care of that in the conntrack file below.</para>
</section>
<section>
<title>conntrack</title>
<para>In addition to invoking the FTP helper on TCP port 21, this file
notracks some IPv4 traffic:</para>
<programlisting>#ACTION SOURCE DEST PROTO DPORT SPORT USER SWITCH
CT:helper:ftp:P { PROTO=tcp, DPORT=21 }
CT:helper:ftp:O { PROTO=tcp, DPORT=21 }
?if __IPV4
#
# Don't track IPv4 broadcasts
#
NOTRACK:P { SOURCE=LOC_IF, DEST=172.20.1.255, PROTO=udp }
NOTRACK:P { DEST=255.255.255.255, PROTO=udp }
NOTRACK:O { DEST=255.255.255.255, PROTO=udp }
NOTRACK:O { DEST=172.20.1.255, PROTO=udp }
NOTRACK:O { DEST=70.90.191.127, PROTO=udp }
?endif
</programlisting>
</section>
<section>
<title>rules</title>
<para>/etc/shorewall/rules has only a couple of rules that are
conditional based on address family:</para>
<programlisting>#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER MARK CONNLIMIT TIME HEADERS SWITCH HELPER
?SECTION ALL
Ping(ACCEPT) { SOURCE=net, DEST=all, RATE=d:ping:2/sec:10 }
Trcrt(ACCEPT) { SOURCE=net, DEST=all, RATE=d:ping:2/sec:10 }
?SECTION ESTABLISHED
?SECTION RELATED
ACCEPT { SOURCE=all, DEST=dmz:$SERVER, PROTO=tcp, DPORT=61001:62000, helper=ftp }
ACCEPT { SOURCE=dmz, DEST=all, PROTO=tcp, helper=ftp }
ACCEPT { SOURCE=all, DEST=net, PROTO=tcp, helper=ftp }
ACCEPT { SOURCE=$FW, DEST=loc, PROTO=tcp, helper=ftp }
ACCEPT { SOURCE=loc, DEST=$FW, PROTO=tcp, helper=ftp }
ACCEPT { SOURCE=all, DEST=all, PROTO=icmp }
RST(ACCEPT) { SOURCE=all, DEST=all }
ACCEPT { SOURCE=dmz, DEST=dmz }
?SECTION INVALID
RST(ACCEPT) { SOURCE=all, DEST=all }
DROP { SOURCE=net, DEST=all }
FIN { SOURCE=all, DEST=all }
?SECTION UNTRACKED
?if __IPV4
Broadcast(ACCEPT) { SOURCE=all, DEST=$FW }
ACCEPT { SOURCE=all, DEST=$FW, PROTO=udp }
CONTINUE { SOURCE=loc, DEST=$FW }
CONTINUE { SOURCE=$FW, DEST=all }
?endif
?SECTION NEW
######################################################################################################
# Stop certain outgoing traffic to the net
#
REJECT:$LOG_LEVEL { SOURCE=loc,vpn,apps DEST=net, PROTO=tcp, DPORT=25 } #Stop direct loc-&gt;net SMTP (Comcast uses submission).
REJECT:$LOG_LEVEL { SOURCE=loc,vpn,apps DEST=net, PROTO=udp, DPORT=1025:1031 } #MS Messaging
REJECT { SOURCE=all, DEST=net, PROTO=tcp, DPORT=137,445, comment="Stop NETBIOS Crap" }
REJECT { SOURCE=all, DEST=net, PROTO=udp, DPORT=137:139, comment="Stop NETBIOS Crap" }
REJECT { SOURCE=all, DEST=net, PROTO=tcp, DPORT=3333, comment="Disallow port 3333" }
REJECT { SOURCE=all, DEST=net, PROTO=udp, DPORT=3544, comment="Stop Teredo" }
?COMMENT
######################################################################################################
# 6in4
#
?if __IPV4
ACCEPT { SOURCE=net:216.218.226.238, DEST=$FW, PROTO=41 }
ACCEPT { SOURCE=$FW, DEST=net:216.218.226.238, PROTO=41 }
?endif
######################################################################################################
# Ping
#
Ping(ACCEPT) { SOURCE=$FW,loc,dmz,vpn, DEST=$FW,loc,dmz,vpn }
Ping(ACCEPT) { SOURCE=all, DEST=net }
######################################################################################################
# SSH
#
AutoBL(SSH,60,-,-,-,-,$LOG_LEVEL)\
{ SOURCE=net, DEST=all, PROTO=tcp, DPORT=22 }
SSH(ACCEPT) { SOURCE=all, DEST=all }
?if __IPV4
SSH(DNAT-) { SOURCE=net, DEST=172.20.2.44, PROTO=tcp, DPORT=ssh, ORIGDEST=70.90.191.123 }
?endif
######################################################################################################
# DNS
#
DNS(ACCEPT) { SOURCE=loc,dmz,vpn,apps, DEST=$FW }
DNS(ACCEPT) { SOURCE=$FW, DEST=net }
######################################################################################################
# Traceroute
#
Trcrt(ACCEPT) { SOURCE=all, DEST=net }
Trcrt(ACCEPT) { SOURCE=net, DEST=$FW,dmz }
######################################################################################################
# Email
#
SMTP(ACCEPT) { SOURCE=net,$FW, DEST=dmz:$LISTS }
SMTP(ACCEPT) { SOURCE=dmz:$LISTS, DEST=net:PROD_IF }
SMTP(REJECT) { SOURCE=dmz:$LISTS, DEST=net }
IMAPS(ACCEPT) { SOURCE=all, DEST=dmz:$MAIL }
Submission(ACCEPT) { SOURCE=all, DEST=dmz:$LISTS }
SMTPS(ACCEPT) { SOURCE=all, DEST=dmz:$LISTS }
IMAP(ACCEPT) { SOURCE=loc,vpn, DEST=net }
######################################################################################################
# NTP
#
NTP(ACCEPT) { SOURCE=all, DEST=net }
NTP(ACCEPT) { SOURCE=loc,vpn,dmz,apps DEST=$FW }
######################################################################################################
# Squid
ACCEPT { SOURCE=loc,vpn, DEST=$FW, PROTO=tcp, DPORT=3128 }
######################################################################################################
# HTTP/HTTPS
#
Web(ACCEPT) { SOURCE=loc,vpn DEST=$FW }
Web(ACCEPT) { SOURCE=$FW, DEST=net, USER=proxy }
Web(DROP) { SOURCE=net, DEST=fw, PROTO=tcp, comment="Do not blacklist web crawlers" }
HTTP(ACCEPT) { SOURCE=net,loc,vpn,apps,$FW DEST=dmz:$SERVER,$LISTS,$MAIL }
HTTPS(ACCEPT) { SOURCE=net,loc,vpn,apps,$FW DEST=dmz:$LISTS,$MAIL }
Web(ACCEPT) { SOURCE=dmz,apps DEST=net,$FW }
Web(ACCEPT) { SOURCE=$FW, DEST=net, USER=root }
Web(ACCEPT) { SOURCE=$FW, DEST=net, USER=teastep }
Web(ACCEPT) { SOURCE=$FW, DEST=net, USER=_apt }
######################################################################################################
# FTP
#
FTP(ACCEPT) { SOURCE=loc,vpn,apps DEST=net }
FTP(ACCEPT) { SOURCE=dmz, DEST=net }
FTP(ACCEPT) { SOURCE=$FW, DEST=net, USER=root }
FTP(ACCEPT) { SOURCE=all, DEST=dmz:$SERVER }
#
# Some FTP clients seem prone to sending the PORT command split over two packets.
# This prevents the FTP connection tracking code from processing the command and setting
# up the proper expectation.
#
# The following rule allows active FTP to work in these cases
# but logs the connection so I can keep an eye on this potential security hole.
#
ACCEPT:$LOG_LEVEL { SOURCE=dmz, DEST=net, PROTO=tcp, DPORT=1024:, SPORT=20 }
######################################################################################################
# whois
#
Whois(ACCEPT) { SOURCE=all, DEST=net }
######################################################################################################
# SMB
#
SMBBI(ACCEPT) { SOURCE=loc, DEST=$FW }
SMBBI(ACCEPT) { SOURCE=vpn, DEST=$FW }
######################################################################################################
# IRC
#
IRC(ACCEPT) { SOURCE=loc,apps, DEST=net }
######################################################################################################
# Rsync
#
Mirrors(ACCEPT:none) { SOURCE=net, DEST=dmz:$SERVER, PROTO=tcp, DPORT=873 }
</programlisting>
</section>
<section>
<title>mangle</title>
<para>Note that TPROXY can be enabled/disabled via a shell variable
setting in /etc/shorewall/params:</para>
<programlisting>#ACTION SOURCE DEST PROTO DPORT SPORT USER TEST LENGTH TOS CONNBYTES HELPER PROBABILITY DSCP
?if __IPV4
#
# I've had a checksum issue with certain IPv4 UDP packets
#
CHECKSUM:T { DEST=FAST_IF, PROTO=udp }
CHECKSUM:T { DEST=DMZ_IF, PROTO=udp }
?endif
?if $PROXY
#
# Use TPROXY for web access from the local LAN
#
DIVERT:R { PROTO=tcp, SPORT=80 }
DIVERT:R { PROTO=tcp, DPORT=80 }
TPROXY(3129,$LOC_ADDR) { SOURCE=LOC_IF, PROTO=tcp, DPORT=80 }
?endif
</programlisting>
</section>
<section>
<title>snat</title>
<para>NAT entries are quite dependent on the address family:</para>
<programlisting>#ACTION SOURCE DEST PROTO PORT IPSEC MARK USER SWITCH ORIGDEST PROBABILITY
?if __IPV4
MASQUERADE { SOURCE=172.20.1.0/24,172.20.2.0/23, DEST=FAST_IF }
MASQUERADE { SOURCE=70.90.191.120/29, DEST=FAST_IF }
SNAT(70.90.191.121) { SOURCE=!70.90.191.120/29, DEST=PROD_IF, PROBABILITY=0.50, COMMENT="Masquerade Local Network" }
SNAT(70.90.191.123) { SOURCE=!70.90.191.120/29, DEST=PROD_IF, COMMENT="Masquerade Local Network" }
SNAT(172.20.1.253) { SOURCE=172.20.3.0/24, DEST=LOC_IF:172.20.1.100 }
?else
SNAT(&amp;PROD_IF) { SOURCE=2601:601:8b00:bf0::/60, DEST=PROD_IF }
SNAT(&amp;FAST_IF) { SOURCE=2001:470:b:227::/64,2001:470:a:227::2, DEST=FAST_IF }
?endif
</programlisting>
</section>
<section>
<title>tunnels</title>
<para>Both address families define IPsec tunnels:</para>
<programlisting>#TYPE ZONE GATEWAY GATEWAY_ZONE
ipsecnat {ZONE=net, GATEWAY=$ALL, GATEWAY_ZONE=vpn }
ipsecnat {ZONE=loc, GATEWAY=$ALL, GATEWAY_ZONE=vpn }
</programlisting>
</section>
<section>
<title>proxyarp</title>
<para>This file is only used in the IPv4 configuration:</para>
<programlisting>#ADDRESS INTERFACE EXTERNAL HAVEROUTE PERSISTENT
70.90.191.122 { INTERFACE=br0, EXTERNAL=eth1, HAVEROUTE=yes, PERSISTENT=no }
</programlisting>
</section>
<section>
<title>isuable</title>
<para>This is just the standard Shorewall isusable extension
script:</para>
<programlisting>local status
status=0
[ -f ${VARDIR}/${1}.status ] &amp;&amp; status=$(cat ${VARDIR}/${1}.status)
return $status
</programlisting>
</section>
<section>
<title>started</title>
<para>/etc/shorewall/started only does something in the IPv4
configuration, although it gets compiled into both scripts:</para>
<programlisting>if [ $g_family = 4 ]; then
qt $IP -4 route replace 70.90.191.122 dev br0
qt $IP -4 route replace 70.90.191.124 dev br0
qt $IP -4 route replace 70.90.191.125 dev br0
fi
</programlisting>
</section>
</section>
</article>
View Git Blame Copy Permalink