1
0
shorewall_code/Shorewall/manpages/shorewall-tunnels.xml
Tom Eastep c9eccaf3b8 Implement ?COMMENT directive
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2012-12-23 10:49:32 -08:00

297 lines
12 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
<refmeta>
<refentrytitle>shorewall-tunnels</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>tunnels</refname>
<refpurpose>Shorewall VPN definition file</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>/etc/shorewall/tunnels</command>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>The tunnels file is used to define rules for encapsulated (usually
encrypted) traffic to pass between the Shorewall system and a remote
gateway. Traffic flowing through the tunnel is handled using the normal
zone/policy/rule mechanism. See <ulink
url="http://www.shorewall.net/VPNBasics.html">http://www.shorewall.net/VPNBasics.html</ulink>
for details.</para>
<para>The columns in the file are as follows.</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">TYPE</emphasis> - {<emphasis
role="bold">ipsec</emphasis>[<emphasis
role="bold">:{noah</emphasis>|ah}]|<emphasis
role="bold">ipsecnat</emphasis>|<emphasis
role="bold">ipip</emphasis>|<emphasis
role="bold">gre</emphasis>|l2tp|<emphasis
role="bold">pptpclient</emphasis>|<emphasis
role="bold">pptpserver</emphasis>|[?]COMMENT|{<emphasis
role="bold">openvpn</emphasis>|<emphasis
role="bold">openvpnclient</emphasis>|<emphasis
role="bold">openvpnserver</emphasis>}[:{<emphasis
role="bold">tcp</emphasis>|<emphasis
role="bold">udp</emphasis>}]<emphasis
role="bold">[</emphasis>:<emphasis>port</emphasis>]|<emphasis
role="bold">generic</emphasis><emphasis
role="bold">:</emphasis><emphasis>protocol</emphasis>[<emphasis
role="bold">:</emphasis><emphasis>port</emphasis>]}</term>
<listitem>
<para>Types are as follows:</para>
<programlisting> <emphasis role="bold">6to4</emphasis> or <emphasis
role="bold">6in4</emphasis> - 6to4 or 6in4 tunnel. The <emphasis
role="bold">6in4</emphasis> synonym was added in 4.4.24.
<emphasis role="bold">ipsec</emphasis> - IPv4 IPSEC
<emphasis role="bold">ipsecnat</emphasis> - IPv4 IPSEC with NAT Traversal (UDP port 4500 encapsulation)
<emphasis role="bold">ipip</emphasis> - IPv4 encapsulated in IPv4 (Protocol 4)
<emphasis role="bold">gre</emphasis> - Generalized Routing Encapsulation (Protocol 47)
<emphasis role="bold">l2tp</emphasis> - Layer 2 Tunneling Protocol (UDP port 1701)
<emphasis role="bold">pptpclient</emphasis> - PPTP Client runs on the firewall
<emphasis role="bold">pptpserver</emphasis> - PPTP Server runs on the firewall
<emphasis role="bold">openvpn</emphasis> - OpenVPN in point-to-point mode
<emphasis role="bold">openvpnclient</emphasis> - OpenVPN client runs on the firewall
<emphasis role="bold">openvpnserver</emphasis> - OpenVPN server runs on the firewall
<emphasis role="bold">generic</emphasis> - Other tunnel type</programlisting>
<para>If the type is <emphasis role="bold">ipsec</emphasis>, it may
be followed by <emphasis role="bold">:ah</emphasis> to indicate that
the Authentication Headers protocol (51) is used by the tunnel (the
default is <option>:noah</option> which means that protocol 51 is
not used). NAT traversal is only supported with ESP (protocol 50) so
<emphasis role="bold">ipsecnat</emphasis> tunnels don't allow the
<emphasis role="bold">ah</emphasis> option (<emphasis
role="bold">ipsecnat:noah</emphasis> may be specified but is
redundant).</para>
<para>If type is <emphasis role="bold">openvpn</emphasis>, <emphasis
role="bold">openvpnclient</emphasis> or <emphasis
role="bold">openvpnserver</emphasis> it may optionally be followed
by ":" and <emphasis role="bold">tcp</emphasis> or <emphasis
role="bold">udp</emphasis> to specify the protocol to be used. If
not specified, <emphasis role="bold">udp</emphasis> is
assumed.</para>
<para>If type is <emphasis role="bold">openvpn</emphasis>, <emphasis
role="bold">openvpnclient</emphasis> or <emphasis
role="bold">openvpnserver</emphasis> it may optionally be followed
by ":" and the port number used by the tunnel. if no ":" and port
number are included, then the default port of 1194 will be used. .
Where both the protocol and port are specified, the protocol must be
given first (e.g., openvpn:tcp:4444).</para>
<para>If type is <emphasis role="bold">generic</emphasis>, it must
be followed by ":" and a protocol name (from /etc/protocols) or a
protocol number. If the protocol is <emphasis
role="bold">tcp</emphasis> or <emphasis role="bold">udp</emphasis>
(6 or 17), then it may optionally be followed by ":" and a port
number.</para>
<para>Comments may be attached to Netfilter rules generated from
entries in this file through the use of COMMENT lines. These lines
begin with the word COMMENT; the remainder of the line is treated as
a comment which is attached to subsequent rules until another
COMMENT line is found or until the end of the file is reached. To
stop adding comments to rules, use a line with only the word
COMMENT.</para>
<note>
<para>Beginning with Shorewall 4.5.11, ?COMMENT is a synonym for
COMMENT and is preferred.</para>
</note>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">ZONE</emphasis> -
<emphasis>zone</emphasis></term>
<listitem>
<para>The <emphasis>zone</emphasis> of the physical interface
through which tunnel traffic passes. This is normally your internet
zone.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">GATEWAY</emphasis>(S) (gateway or
gateways) - <emphasis>address-or-range</emphasis> <emphasis
role="bold">[ , ... ]</emphasis></term>
<listitem>
<para>The IP address of the remote tunnel gateway. If the remote
gateway has no fixed address (Road Warrior) then specify the gateway
as <emphasis role="bold">0.0.0.0/0</emphasis>. May be specified as a
network address and if your kernel and iptables include iprange
match support then IP address ranges are also allowed.</para>
<para>Beginning with Shorewall 4.5.3, a list of addresses or ranges
may be given. Exclusion (<ulink
url="shorewall-exclusion.html">shorewall-exclusion</ulink> (5) ) is
not supported.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">GATEWAY ZONES</emphasis> (gateway_zone or
gateway_zones) - [<emphasis>zone</emphasis>[<emphasis
role="bold">,</emphasis><emphasis>zone</emphasis>]...]</term>
<listitem>
<para>Optional. If the gateway system specified in the third column
is a standalone host then this column should contain a
comma-separated list of the names of the zones that the host might
be in. This column only applies to IPSEC tunnels where it enables
ISAKMP traffic to flow through the tunnel to the remote
gateway(s).</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Example</title>
<variablelist>
<varlistentry>
<term>Example 1:</term>
<listitem>
<para>IPSec tunnel.</para>
<para>The remote gateway is 4.33.99.124 and the remote subnet is
192.168.9.0/24. The tunnel does not use the AH protocol</para>
<programlisting> #TYPE ZONE GATEWAY
ipsec:noah net 4.33.99.124</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 2:</term>
<listitem>
<para>Road Warrior (LapTop that may connect from anywhere) where the
"gw" zone is used to represent the remote LapTop</para>
<programlisting> #TYPE ZONE GATEWAY GATEWAY ZONES
ipsec net 0.0.0.0/0 gw</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 3:</term>
<listitem>
<para>Host 4.33.99.124 is a standalone system connected via an ipsec
tunnel to the firewall system. The host is in zone gw.</para>
<programlisting> #TYPE ZONE GATEWAY GATEWAY ZONES
ipsec net 4.33.99.124 gw</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 4:</term>
<listitem>
<para>Road Warriors that may belong to zones vpn1, vpn2 or vpn3. The
FreeS/Wan _updown script will add the host to the appropriate zone
using the <command>shorewall add</command> command on connect and
will remove the host from the zone at disconnect time.</para>
<programlisting> #TYPE ZONE GATEWAY GATEWAY ZONES
ipsec net 0.0.0.0/0 vpn1,vpn2,vpn3</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 5:</term>
<listitem>
<para>You run the Linux PPTP client on your firewall and connect to
server 192.0.2.221.</para>
<programlisting> #TYPE ZONE GATEWAY GATEWAY ZONES
pptpclient net 192.0.2.221</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 6:</term>
<listitem>
<para>You run a PPTP server on your firewall.</para>
<programlisting> #TYPE ZONE GATEWAY GATEWAY ZONES
pptpserver net 0.0.0.0/0</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 7:</term>
<listitem>
<para>OPENVPN tunnel. The remote gateway is 4.33.99.124 and openvpn
uses port 7777.</para>
<programlisting> #TYPE ZONE GATEWAY GATEWAY ZONES
openvpn:7777 net 4.33.99.124</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 8:</term>
<listitem>
<para>You have a tunnel that is not one of the supported types. Your
tunnel uses UDP port 4444. The other end of the tunnel is
4.3.99.124.</para>
<programlisting> #TYPE ZONE GATEWAY GATEWAY ZONES
generic:udp:4444 net 4.3.99.124</programlisting>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>FILES</title>
<para>/etc/shorewall/tunnels</para>
</refsect1>
<refsect1>
<title>See ALSO</title>
<para><ulink
url="http://shorewall.net/configuration_file_basics.htm#Pairs">http://shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
<para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5),
shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5),
shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
shorewall-zones(5)</para>
</refsect1>
</refentry>