shorewall_code/Shorewall-common/lib.dynamiczones
2007-04-03 01:33:28 +00:00

401 lines
10 KiB
Bash

#!/bin/sh
#
# Shorewall 3.4 -- /usr/share/shorewall/lib.dynamiczones
#
# This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
#
# (c) 1999,2000,2001,2002,2003,2004,2005,2006,2007 - Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
#
# This library is loaded by /usr/share/shorewall/firewall when processing
# the 'add' and 'delete' commands.
#
#
# Add a host or networks to a zone
#
add_to_zone() # $1...${n-1} = <interface>[:<hosts>] $n = zone
{
local interface host zone z h z1 z2 chain
local dhcp_interfaces blacklist_interfaces maclist_interfaces
local tcpflags_interfaces newhostlist=
local rulenum source_chain dest_hosts iface hosts hostlist=
nat_chain_exists() # $1 = chain name
{
qt $IPTABLES -t nat -L $1 -n
}
do_iptables() # $@ = command
{
[ -n "$PHYSDEV_MATCH" ] && [ -f $TMP_DIR/physdev ] && rm -f $TMP_DIR/physdev
[ -n "$IPRANGE_MATCH" ] && [ -f $TMP_DIR/iprange ] && rm -f $TMP_DIR/iprange
if ! $IPTABLES $@ ; then
error_message "ERROR: Can't add $newhost to zone $zone"
fi
}
DOING=Processing
DONE=Processed
#
# Load $zones
#
determine_zones
#
# Validate Interfaces File
#
validate_interfaces_file
#
# Validate Hosts File
#
validate_hosts_file
#
# Validate IPSec File
#
f=$(find_file $IPSECFILE)
[ -f $f ] && setup_ipsec $f
#
# Normalize host list
#
while [ $# -gt 1 ]; do
interface=${1%%:*}
host=${1#*:}
#
# Be sure that the interface was dynamic at last [re]start
#
if ! chain_exists $(input_chain $interface) ; then
startup_error "Unknown interface $interface"
fi
if ! chain_exists $(dynamic_in $interface) ; then
startup_error "At last Shorewall [re]start, DYNAMIC_ZONES=No in shorewall.conf"
fi
if [ -z "$host" ]; then
hostlist="$hostlist $interface:0.0.0.0/0"
else
for h in $(separate_list $host); do
hostlist="$hostlist $interface:$h"
done
fi
shift
done
#
# Validate Zone
#
zone=$1
validate_zone $zone || startup_error "Unknown zone: $zone"
[ "$zone" = $FW ] && startup_error "Can't add $1 to firewall zone"
#
# Be sure that Shorewall has been restarted using a DZ-aware version of the code
#
[ -f ${VARDIR}/chains ] || startup_error "${VARDIR}/chains -- file not found"
[ -f ${VARDIR}/zones ] || startup_error "${VARDIR}/zones -- file not found"
#
# Check for duplicates and create a new zone state file
#
> ${VARDIR}/zones_$$
while read z type hosts; do
if [ "$z" = "$zone" ]; then
case "$hosts" in
*exclude*)
rm -f ${VARDIR}/zones_$$
startup_error "Modifying a zone that has an exclude list is not supported"
;;
*)
for h in $hostlist; do
list_search $h $hosts
if [ "$?" -gt 0 ]; then
newhostlist="$newhostlist $h"
else
error_message "$h already in zone $zone"
fi
done
[ -z "$hosts" ] && hosts=$newhostlist || hosts="$hosts $newhostlist"
;;
esac
fi
eval ${z}_hosts=\"$hosts\"
echo "$z $type $hosts" >> ${VARDIR}/zones_$$
done < ${VARDIR}/zones
mv -f ${VARDIR}/zones_$$ ${VARDIR}/zones
TERMINATOR=fatal_error
#
# Create a new Zone state file
#
for newhost in $newhostlist; do
#
# Isolate interface and host parts
#
interface=${newhost%%:*}
host=${newhost#*:}
#
# If the zone passed in the command has a dnat chain then insert a rule in
# the nat table PREROUTING chain to jump to that chain when the source
# matches the new host(s)#
#
chain=${zone}_dnat
if nat_chain_exists $chain; then
do_iptables -t nat -A $(dynamic_in $interface) $(source_ip_range $host) $(match_ipsec_in $zone $newhost) -j $chain
fi
#
# Insert new rules into the filter table for the passed interface
#
while read z1 z2 chain; do
[ "$z1" = "$z2" ] && op="-I" || op="-A"
if [ "$z1" = "$zone" ]; then
if [ "$z2" = "$FW" ]; then
do_iptables $op $(dynamic_in $interface) $(match_source_hosts $host) $(match_ipsec_in $z1 $newhost) -j $chain
else
source_chain=$(dynamic_fwd $interface)
if is_ipsec_host $z1 $newhost ; then
do_iptables $op $source_chain $(match_source_hosts $host) $(match_ipsec_in $z1 $newhost) -j ${z1}_frwd
else
eval dest_hosts=\"\$${z2}_hosts\"
for h in $dest_hosts; do
iface=${h%%:*}
hosts=${h#*:}
if [ "$iface" != "$interface" -o "$hosts" != "$host" ]; then
do_iptables $op $source_chain $(match_source_hosts $host) -o $iface $(match_dest_hosts $hosts) $(match_ipsec_out $z2 $h) -j $chain
fi
done
fi
fi
elif [ "$z2" = "$zone" ]; then
if [ "$z1" = "$FW" ]; then
#
# Add a rule to the dynamic out chain for the interface
#
do_iptables $op $(dynamic_out $interface) $(match_dest_hosts $host) $(match_ipsec_out $z2 $newhost) -j $chain
else
eval source_hosts=\"\$${z1}_hosts\"
for h in $source_hosts; do
iface=${h%%:*}
hosts=${h#*:}
if [ "$iface" != "$interface" -o "$hosts" != "$host" ]; then
if is_ipsec_host $z1 $h; then
do_iptables $op ${z1}_dyn -o $interface $(match_dest_hosts $host) $(match_ipsec_out $z2 $newhost) -j $chain
else
do_iptables $op $(dynamic_fwd $iface) $(match_source_hosts $hosts) -o $interface $(match_dest_hosts $host) $(match_ipsec_out $z2 $newhost) -j $chain
fi
fi
done
fi
fi
done < ${VARDIR}/chains
progress_message "$newhost added to zone $zone"
done
rm -rf $TMP_DIR
}
#
# Delete a host or networks from a zone
#
delete_from_zone() # $1 = <interface>[:<hosts>] $2 = zone
{
local interface host zone z h z1 z2 chain delhost
local dhcp_interfaces blacklist_interfaces maclist_interfaces tcpflags_interfaces
local rulenum source_chain dest_hosts iface hosts hostlist=
DOING=Processing
DONE=Processed
#
# Load $zones
#
determine_zones
#
# Validate Interfaces File
#
validate_interfaces_file
#
# Validate Hosts File
#
validate_hosts_file
#
# Validate IPSec File
#
f=$(find_file ipsec)
[ -f $f ] && setup_ipsec $f
#
# Normalize host list
#
while [ $# -gt 1 ]; do
interface=${1%%:*}
host=${1#*:}
#
# Be sure that the interface was dynamic at last [re]start
#
if ! chain_exists $(input_chain $interface) ; then
startup_error "Unknown interface $interface"
fi
if ! chain_exists $(dynamic_in $interface) ; then
startup_error "At last Shorewall [re]start, DYNAMIC_ZONES=No in shorewall.conf"
fi
if [ -z "$host" ]; then
hostlist="$hostlist $interface:0.0.0.0/0"
else
for h in $(separate_list $host); do
hostlist="$hostlist $interface:$h"
done
fi
shift
done
#
# Validate Zone
#
zone=$1
validate_zone $zone || startup_error "Unknown zone: $zone"
[ "$zone" = $FW ] && startup_error "Can't delete from the firewall zone"
#
# Be sure that Shorewall has been restarted using a DZ-aware version of the code
#
[ -f ${VARDIR}/chains ] || startup_error "${VARDIR}/chains -- file not found"
[ -f ${VARDIR}/zones ] || startup_error "${VARDIR}/zones -- file not found"
#
# Delete the passed hosts from the zone state file
#
> ${VARDIR}/zones_$$
while read z hosts; do
if [ "$z" = "$zone" ]; then
temp=$hosts
hosts=
for host in $hostlist; do
found=
for h in $temp; do
if [ "$h" = "$host" ]; then
found=Yes
break
fi
done
[ -n "$found" ] || error_message "WARNING: $host does not appear to be in zone $zone"
done
for h in $temp; do
found=
for host in $hostlist; do
if [ "$h" = "$host" ]; then
found=Yes
break
fi
done
[ -n "$found" ] || hosts="$hosts $h"
done
fi
eval ${z}_hosts=\"$hosts\"
echo "$z $hosts" >> ${VARDIR}/zones_$$
done < ${VARDIR}/zones
mv -f ${VARDIR}/zones_$$ ${VARDIR}/zones
TERMINATOR=fatal_error
for delhost in $hostlist; do
interface=${delhost%%:*}
host=${delhost#*:}
#
# Delete any nat table entries for the host(s)
#
qt_iptables -t nat -D $(dynamic_in $interface) $(match_source_hosts $host) $(match_ipsec_in $zone $delhost) -j ${zone}_dnat
#
# Delete rules rules the input chains for the passed interface
#
while read z1 z2 chain; do
if [ "$z1" = "$zone" ]; then
if [ "$z2" = "$FW" ]; then
qt_iptables -D $(dynamic_in $interface) $(match_source_hosts $host) $(match_ipsec_in $z1 $delhost) -j $chain
else
source_chain=$(dynamic_fwd $interface)
if is_ipsec_host $z1 $delhost ; then
qt_iptables -D $source_chain $(match_source_hosts $host) $(match_ipsec_in $z1 $newhost) -j ${z1}_frwd
else
eval dest_hosts=\"\$${z2}_hosts\"
[ "$z2" = "$zone" ] && dest_hosts="$dest_hosts $hostlist"
for h in $dest_hosts; do
iface=${h%%:*}
hosts=${h#*:}
if [ "$iface" != "$interface" -o "$hosts" != "$host" ]; then
qt_iptables -D $source_chain $(match_source_hosts $host) -o $iface $(match_dest_hosts $hosts) $(match_ipsec_out $z2 $h) -j $chain
fi
done
fi
fi
elif [ "$z2" = "$zone" ]; then
if [ "$z1" = "$FW" ]; then
qt_iptables -D $(dynamic_out $interface) $(match_dest_hosts $host) $(match_ipsec_out $z2 $delhost) -j $chain
else
eval source_hosts=\"\$${z1}_hosts\"
for h in $source_hosts; do
iface=${h%%:*}
hosts=${h#*:}
if [ "$iface" != "$interface" -o "$hosts" != "$host" ]; then
if is_ipsec_host $z1 $h; then
qt_iptables -D ${z1}_dyn -o $interface $(match_dest_hosts $host) $(match_ipsec_out $z2 $delhost) -j $chain
else
qt_iptables -D $(dynamic_fwd $iface) $(match_source_hosts $hosts) -o $interface $(match_dest_hosts $host) $(match_ipsec_out $z2 $delhost) -j $chain
fi
fi
done
fi
fi
done < ${VARDIR}/chains
progress_message "$delhost removed from zone $zone"
done
rm -rf $TMP_DIR
}