holm/shorewall_code
1
0
Fork 0
forked from extern/shorewall_code
Code Pull Requests Activity
5caaf813d0
shorewall_code/Shorewall-perl-maybe/Shorewall/Config.pm
teastep 2e77a05dca Save state of the IPv6 code take 2 
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@8948 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2008-12-08 18:33:58 +00:00

2267 lines
60 KiB
Perl
Raw Blame History

#
# Shorewall-perl 4.2 -- /usr/share/shorewall-perl/Shorewall/Config.pm
#
# This program is under GPL [http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt]
#
# (c) 2007,2008 - Tom Eastep (teastep@shorewall.net)
#
# Complete documentation is available at http://shorewall.net
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of Version 2 of the GNU General Public License
# as published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# This module is responsible for lower level configuration file handling.
# It also exports functions for generating warning and error messages.
# The get_configuration function parses the shorewall.conf, capabilities and
# modules files during compiler startup. The module also provides the basic
# output file services such as creation of temporary 'object' files, writing
# into those files (emitters) and finalizing those files (renaming
# them to their final name and setting their mode appropriately).
#
package Shorewall::Config;
use strict;
use warnings;
use File::Basename;
use File::Temp qw/ tempfile tempdir /;
use Cwd qw(abs_path getcwd);
use autouse 'Carp' => qw(longmess confess);
use Scalar::Util 'reftype';
our @ISA = qw(Exporter);
#
# Imported variables should be treated as read-only by importers
#
our @EXPORT = qw(
warning_message
fatal_error
progress_message
progress_message2
progress_message3
);
our @EXPORT_OK = qw( $shorewall_dir initialize read_a_line1 set_config_path shorewall);
our %EXPORT_TAGS = ( internal => [ qw( create_temp_object
finalize_object
numeric_value
numeric_value1
in_hex
in_hex2
in_hex3
in_hex4
in_hex8
emit
emit_unindented
save_progress_message
save_progress_message_short
set_timestamp
set_verbose
set_log
close_log
set_command
push_indent
pop_indent
copy
create_temp_aux_config
finalize_aux_config
set_shorewall_dir
set_debug
find_file
split_list
split_line
split_line1
first_entry
open_file
close_file
push_open
pop_open
read_a_line
validate_level
qt
ensure_config_path
get_configuration
require_capability
report_capabilities
propagateconfig
append_file
run_user_exit
run_user_exit1
run_user_exit2
generate_aux_config
$command
$doing
$done
$currentline
%config
%globals
%capabilities
MIN_VERBOSITY
MAX_VERBOSITY
) ] );
Exporter::export_ok_tags('internal');
our $VERSION = 4.2.0;
#
# describe the current command, it's present progressive, and it's completion.
#
our ($command, $doing, $done );
#
# VERBOSITY
#
our $verbose;
#
# Logging
#
our ( $log, $log_verbose );
#
# Timestamp each progress message, if true.
#
our $timestamp;
#
# Object file handle
#
our $object;
#
# True, if last line emitted is blank
#
our $lastlineblank;
#
# Number of columns to indent the output
#
our $indent;
#
# Object's Directory and File
#
our ( $dir, $file );
#
# Temporary output file's name
#
our $tempfile;
#
# Misc Globals
#
our %globals;
#
# From shorewall.conf file
#
our %config;
#
# Config options and global settings that are to be copied to object script
#
our @propagateconfig = qw/ DISABLE_IPV6 IPV6 MODULESDIR MODULE_SUFFIX LOGFORMAT SUBSYSLOCK LOCKFILE /;
our @propagateenv = qw/ LOGLIMIT LOGTAGONLY LOGRULENUMBERS /;
#
# From parsing the capabilities file
#
our %capabilities;
#
# Capabilities
#
our %capdesc = ( NAT_ENABLED => 'NAT',
MANGLE_ENABLED => 'Packet Mangling',
MULTIPORT => 'Multi-port Match' ,
XMULTIPORT => 'Extended Multi-port Match',
CONNTRACK_MATCH => 'Connection Tracking Match',
OLD_CONNTRACK_MATCH =>
'Old conntrack match syntax',
NEW_CONNTRACK_MATCH =>
'Extended Connection Tracking Match',
USEPKTTYPE => 'Packet Type Match',
POLICY_MATCH => 'Policy Match',
PHYSDEV_MATCH => 'Physdev Match',
PHYSDEV_BRIDGE => 'Physdev-is-bridged support',
LENGTH_MATCH => 'Packet length Match',
IPRANGE_MATCH => 'IP Range Match',
RECENT_MATCH => 'Recent Match',
OWNER_MATCH => 'Owner Match',
IPSET_MATCH => 'Ipset Match',
CONNMARK => 'CONNMARK Target',
XCONNMARK => 'Extended CONNMARK Target',
CONNMARK_MATCH => 'Connmark Match',
XCONNMARK_MATCH => 'Extended Connmark Match',
RAW_TABLE => 'Raw Table',
IPP2P_MATCH => 'IPP2P Match',
CLASSIFY_TARGET => 'CLASSIFY Target',
ENHANCED_REJECT => 'Extended Reject',
KLUDGEFREE => 'Repeat match',
MARK => 'MARK Target',
XMARK => 'Extended Mark Target',
MANGLE_FORWARD => 'Mangle FORWARD Chain',
COMMENTS => 'Comments',
ADDRTYPE => 'Address Type Match',
TCPMSS_MATCH => 'TCPMSS Match',
HASHLIMIT_MATCH => 'Hashlimit Match',
NFQUEUE_TARGET => 'NFQUEUE Target',
REALM_MATCH => 'Realm Match',
HELPER_MATCH => 'Helper Match',
CONNLIMIT_MATCH => 'Connlimit Match',
TIME_MATCH => 'Time Match',
GOTO_TARGET => 'Goto Support',
CAPVERSION => 'Capability Version',
);
#
# Directories to search for configuration files
#
our @config_path;
#
# Stash away file references here when we encounter INCLUDE
#
our @includestack;
#
# Allow nested opens
#
our @openstack;
our $currentline; # Current config file line image
our $currentfile; # File handle reference
our $currentfilename; # File NAME
our $currentlinenumber; # Line number
our $scriptfile; # File Handle Reference to current temporary file being written by an in-line Perl script
our $scriptfilename; # Name of that file.
our @tempfiles; # Files that need unlinking at END
our $first_entry; # Message to output or function to call on first non-blank line of a file
our $shorewall_dir; # Shorewall Directory
our $debug; # If true, use Carp to report errors with stack trace.
use constant { MIN_VERBOSITY => -1,
MAX_VERBOSITY => 2 };
#
# Initialize globals -- we take this novel approach to globals initialization to allow
# the compiler to run multiple times in the same process. The
# initialize() function does globals initialization for this
# module and is called from an INIT block below. The function is
# also called by Shorewall::Compiler::compiler at the beginning of
# the second and subsequent calls to that function.
#
sub initialize() {
( $command, $doing, $done ) = qw/ compile Compiling Compiled/; #describe the current command, it's present progressive, and it's completion.
$verbose = 0; # Verbosity setting. 0 = almost silent, 1 = major progress messages only, 2 = all progress messages (very noisy)
$log = undef; # File reference for log file
$log_verbose = -1; # Verbosity of log.
$timestamp = ''; # If true, we are to timestamp each progress message
$object = 0; # Object (script) file Handle Reference
$lastlineblank = 0; # Avoid extra blank lines in the output
$indent = ''; # Current indentation
( $dir, $file ) = ('',''); # Object's Directory and File
$tempfile = ''; # Temporary File Name
#
# Misc Globals
#
%globals = ( SHAREDIR => '/usr/share/shorewall' ,
CONFDIR => '/etc/shorewall',
SHAREDIRPL => '/usr/share/shorewall-perl/',
ORIGINAL_POLICY_MATCH => '',
LOGPARMS => '',
TC_SCRIPT => '',
EXPORT => 0,
VERSION => "4.2.3",
CAPVERSION => 40203 ,
);
#
# From shorewall.conf file
#
%config =
( STARTUP_ENABLED => undef,
VERBOSITY => undef,
#
# Logging
#
LOGFILE => undef,
LOGFORMAT => undef,
LOGTAGONLY => undef,
LOGRATE => undef,
LOGBURST => undef,
LOGALLNEW => undef,
BLACKLIST_LOGLEVEL => undef,
MACLIST_LOG_LEVEL => undef,
TCP_FLAGS_LOG_LEVEL => undef,
RFC1918_LOG_LEVEL => undef,
SMURF_LOG_LEVEL => undef,
LOG_MARTIANS => undef,
LOG_VERBOSITY => undef,
STARTUP_LOG => undef,
#
# Location of Files
#
IPTABLES => undef,
#
#PATH is inherited
#
PATH => undef,
SHOREWALL_SHELL => undef,
SUBSYSLOCK => undef,
MODULESDIR => undef,
#
#CONFIG_PATH is inherited
#
CONFIG_PATH => undef,
RESTOREFILE => undef,
IPSECFILE => undef,
LOCKFILE => undef,
#
# Default Actions/Macros
#
DROP_DEFAULT => undef,
REJECT_DEFAULT => undef,
ACCEPT_DEFAULT => undef,
QUEUE_DEFAULT => undef,
NFQUEUE_DEFAULT => undef,
#
# RSH/RCP Commands
#
RSH_COMMAND => undef,
RCP_COMMAND => undef,
#
# Firewall Options
#
BRIDGING => undef,
IP_FORWARDING => undef,
ADD_IP_ALIASES => undef,
ADD_SNAT_ALIASES => undef,
RETAIN_ALIASES => undef,
TC_ENABLED => undef,
TC_EXPERT => undef,
CLEAR_TC => undef,
MARK_IN_FORWARD_CHAIN => undef,
CLAMPMSS => undef,
ROUTE_FILTER => undef,
DETECT_DNAT_IPADDRS => undef,
MUTEX_TIMEOUT => undef,
ADMINISABSENTMINDED => undef,
BLACKLISTNEWONLY => undef,
DELAYBLACKLISTLOAD => undef,
MODULE_SUFFIX => undef,
DISABLE_IPV6 => undef,
IPV6 => undef,
DYNAMIC_ZONES => undef,
PKTTYPE=> undef,
RFC1918_STRICT => undef,
MACLIST_TABLE => undef,
MACLIST_TTL => undef,
SAVE_IPSETS => undef,
MAPOLDACTIONS => undef,
FASTACCEPT => undef,
IMPLICIT_CONTINUE => undef,
HIGH_ROUTE_MARKS => undef,
USE_ACTIONS=> undef,
OPTIMIZE => undef,
EXPORTPARAMS => undef,
SHOREWALL_COMPILER => undef,
EXPAND_POLICIES => undef,
KEEP_RT_TABLES => undef,
DELETE_THEN_ADD => undef,
MULTICAST => undef,
DONT_LOAD => '',
AUTO_COMMENT => undef ,
MANGLE_ENABLED => undef ,
NULL_ROUTE_RFC1918 => undef ,
USE_DEFAULT_RT => undef ,
#
# Packet Disposition
#
MACLIST_DISPOSITION => undef,
TCP_FLAGS_DISPOSITION => undef,
BLACKLIST_DISPOSITION => undef,
);
#
# From parsing the capabilities file
#
%capabilities =
( NAT_ENABLED => undef,
MANGLE_ENABLED => undef,
MULTIPORT => undef,
XMULTIPORT => undef,
CONNTRACK_MATCH => undef,
NEW_CONNTRACK_MATCH => undef,
OLD_CONNTRACK_MATCH => undef,
USEPKTTYPE => undef,
POLICY_MATCH => undef,
PHYSDEV_MATCH => undef,
PHYSDEV_BRIDGE => undef,
LENGTH_MATCH => undef,
IPRANGE_MATCH => undef,
RECENT_MATCH => undef,
OWNER_MATCH => undef,
IPSET_MATCH => undef,
CONNMARK => undef,
XCONNMARK => undef,
CONNMARK_MATCH => undef,
XCONNMARK_MATCH => undef,
RAW_TABLE => undef,
IPP2P_MATCH => undef,
CLASSIFY_TARGET => undef,
ENHANCED_REJECT => undef,
KLUDGEFREE => undef,
MARK => undef,
XMARK => undef,
MANGLE_FORWARD => undef,
COMMENTS => undef,
ADDRTYPE => undef,
TCPMSS_MATCH => undef,
HASHLIMIT_MATCH => undef,
NFQUEUE_TARGET => undef,
REALM_MATCH => undef,
HELPER_MATCH => undef,
CONNLIMIT_MATCH => undef,
TIME_MATCH => undef,
GOTO_TARGET => undef,
CAPVERSION => undef,
);
#
# Directories to search for configuration files
#
@config_path = ();
#
# Stash away file references here when we encounter INCLUDE
#
@includestack = ();
#
# Allow nested opens
#
@openstack = ();
$currentline = ''; # Line image
$currentfile = undef; # File handle reference
$currentfilename = ''; # File NAME
$currentlinenumber = 0; # Line number
$first_entry = 0; # Message to output or function to call on first non-blank file entry
$shorewall_dir = ''; #Shorewall Directory
$debug = 0;
}
INIT {
initialize;
#
# These variables appear within single quotes in shorewall.conf -- add them to ENV
# so that read_a_line doesn't have to be smart enough to parse that usage.
#
for ( qw/root system command files destination/ ) {
$ENV{$_} = '' unless exists $ENV{$_};
}
}
my @abbr = qw( Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec );
#
# Issue a Warning Message
#
sub warning_message
{
my $linenumber = $currentlinenumber || 1;
my $currentlineinfo = $currentfile ? " : $currentfilename (line $linenumber)" : '';
our @localtime;
$| = 1;
if ( $log ) {
@localtime = localtime;
printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
}
if ( $debug ) {
print STDERR longmess( " WARNING: @_$currentlineinfo" );
print $log longmess( " WARNING: @_$currentlineinfo\n" ) if $log;
} else {
print STDERR " WARNING: @_$currentlineinfo\n";
print $log " WARNING: @_$currentlineinfo\n" if $log;
}
$| = 0;
}
#
# Issue fatal error message and die
#
sub fatal_error {
my $linenumber = $currentlinenumber || 1;
my $currentlineinfo = $currentfile ? " : $currentfilename (line $linenumber)" : '';
$| = 1;
if ( $log ) {
our @localtime = localtime;
printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
if ( $debug ) {
print $log longmess( " ERROR: @_$currentlineinfo\n" );
} else {
print $log " ERROR: @_$currentlineinfo\n";
}
close $log;
$log = undef;
}
confess " ERROR: @_$currentlineinfo" if $debug;
die " ERROR: @_$currentlineinfo\n";
}
sub fatal_error1 {
$| = 1;
if ( $log ) {
our @localtime = localtime;
printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
if ( $debug ) {
print $log longmess( " ERROR: @_\n" );
} else {
print $log " ERROR: @_\n";
}
close $log;
$log = undef;
}
confess " ERROR: @_" if $debug;
die " ERROR: @_\n";
}
#
# Convert value to decimal number
#
sub numeric_value ( $ ) {
my $mark = lc $_[0];
return undef unless $mark =~ /^-?(0x[a-f0-9]+|0[0-7]*|[1-9]\d*)$/;
$mark =~ /^0/ ? oct $mark : $mark;
}
sub numeric_value1 ( $ ) {
my $val = numeric_value $_[0];
fatal_error "Invalid Number ($_[0])" unless defined $val;
$val;
}
#
# Return the argument expressed in Hex
#
sub in_hex( $ ) {
sprintf '0x%x', $_[0];
}
sub in_hex2( $ ) {
sprintf '0x%02x', $_[0];
}
sub in_hex3( $ ) {
sprintf '0x%03x', $_[0];
}
sub in_hex4( $ ) {
sprintf '0x%04x', $_[0];
}
sub in_hex8( $ ) {
sprintf '0x%08x', $_[0];
}
#
# Write the arguments to the object file (if any) with the current indentation.
#
# Replaces leading spaces with tabs as appropriate and suppresses consecutive blank lines.
#
sub emit {
if ( $object ) {
#
# 'compile' as opposed to 'check'
#
for ( @_ ) {
unless ( /^\s*$/ ) {
my $line = $_; # This copy is necessary because the actual arguments are almost always read-only.
$line =~ s/^\n// if $lastlineblank;
$line =~ s/^/$indent/gm if $indent;
$line =~ s/ /\t/gm;
print $object "$line\n";
$lastlineblank = ( substr( $line, -1, 1 ) eq "\n" );
} else {
print $object "\n" unless $lastlineblank;
$lastlineblank = 1;
}
}
}
}
#
# Write passed message to the object with newline but no indentation.
#
sub emit_unindented( $ ) {
print $object "$_[0]\n" if $object;
}
#
# Write a progress_message2 command with surrounding blank lines to the output file.
#
sub save_progress_message( $ ) {
emit "\nprogress_message2 @_\n" if $object;
}
#
# Write a progress_message command to the output file.
#
sub save_progress_message_short( $ ) {
emit "progress_message $_[0]" if $object;
}
#
# Set $timestamp
#
sub set_timestamp( $ ) {
$timestamp = shift;
}
#
# Set $verbose
#
sub set_verbose( $ ) {
$verbose = shift;
}
#
# Set $log and $log_verbose
#
sub set_log ( $$ ) {
my ( $l, $v ) = @_;
if ( defined $v ) {
my $value = numeric_value( $v );
fatal_error "Invalid Log Verbosity ( $v )" unless defined($value) && ( $value >= -1 ) && ( $value <= 2);
$log_verbose = $value;
}
if ( $l && $log_verbose >= 0 ) {
unless ( open $log , '>>' , $l ) {
$log = undef;
fatal_error "Unable to open STARTUP_LOG ($l) for writing: $!";
}
} else {
$log_verbose = -1;
}
}
sub close_log() {
close $log, $log = undef if $log;
}
#
# Set $command, $doing and $done
#
sub set_command( $$$ ) {
($command, $doing, $done) = @_;
}
#
# Print the current TOD to STDOUT.
#
sub timestamp() {
our @localtime = localtime;
printf '%02d:%02d:%02d ', @localtime[2,1,0];
}
#
# Write a message if $verbose >= 2
#
sub progress_message {
my $havelocaltime = 0;
if ( $verbose > 1 ) {
timestamp, $havelocaltime = 1 if $timestamp;
#
# We use this function to display messages containing raw config file images which may contains tabs (including multiple tabs in succession).
# The following makes such messages look more readable and uniform
#
my $line = "@_";
$line =~ s/\s+/ /g;
print "$line\n";
}
if ( $log_verbose > 1 ) {
our @localtime;
@localtime = localtime unless $havelocaltime;
printf $log '%s %2d %2d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
my $line = "@_";
$line =~ s/\s+/ /g;
print $log "$line\n";
}
}
#
# Write a message if $verbose >= 1
#
sub progress_message2 {
my $havelocaltime = 0;
if ( $verbose > 0 ) {
timestamp, $havelocaltime = 1 if $timestamp;
print "@_\n";
}
if ( $log_verbose > 0 ) {
our @localtime;
@localtime = localtime unless $havelocaltime;
printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
print $log "@_\n";
}
}
#
# Write a message if $verbose >= 0
#
sub progress_message3 {
my $havelocaltime = 0;
if ( $verbose >= 0 ) {
timestamp, $havelocaltime = 1 if $timestamp;
print "@_\n";
}
if ( $log_verbose >= 0 ) {
our @localtime;
@localtime = localtime unless $havelocaltime;
printf $log '%s %2d %02d:%02d:%02d ', $abbr[$localtime[4]], @localtime[3,2,1,0];
print $log "@_\n";
}
}
#
# Push/Pop Indent
#
sub push_indent() {
$indent = "$indent ";
}
sub pop_indent() {
$indent = substr( $indent , 0 , ( length $indent ) - 4 );
}
#
# Functions for copying files into the object
#
sub copy( $ ) {
if ( $object ) {
my $file = $_[0];
open IF , $file or fatal_error "Unable to open $file: $!";
while ( <IF> ) {
chomp;
if ( /^\s*$/ ) {
print $object "\n" unless $lastlineblank;
$lastlineblank = 1;
} else {
s/^/$indent/ if $indent;
print $object $_;
print $object "\n";
$lastlineblank = 0;
}
}
close IF;
}
}
#
# This one handles line continuation.
sub copy1( $ ) {
if ( $object ) {
my $file = $_[0];
open IF , $file or fatal_error "Unable to open $file: $!";
my $do_indent = 1;
while ( <IF> ) {
chomp;
if ( /^\s*$/ ) {
print $object "\n";
$do_indent = 1;
next;
}
s/^/$indent/ if $indent && $do_indent;
print $object $_;
print $object "\n";
$do_indent = ! ( /\\$/ );
}
close IF;
}
}
#
# Create the temporary object file -- the passed file name is the name of the final file.
# We create a temporary file in the same directory so that we can use rename to finalize it.
#
sub create_temp_object( $ ) {
my $objectfile = $_[0];
my $suffix;
eval {
( $file, $dir, $suffix ) = fileparse( $objectfile );
};
die if $@;
fatal_error "$dir is a Symbolic Link" if -l $dir;
fatal_error "Directory $dir does not exist" unless -d _;
fatal_error "Directory $dir is not writable" unless -w _;
fatal_error "$objectfile is a Symbolic Link" if -l $objectfile;
fatal_error "$objectfile is a Directory" if -d _;
fatal_error "$objectfile exists and is not a compiled script" if -e _ && ! -x _;
fatal_error "A compiled script may not be named 'shorewall'" if "$file" eq 'shorewall' && $suffix eq '';
eval {
$dir = abs_path $dir;
( $object, $tempfile ) = tempfile ( 'tempfileXXXX' , DIR => $dir );
};
fatal_error "Unable to create temporary file in directory $dir" if $@;
$file = "$file.$suffix" if $suffix;
$dir .= '/' unless substr( $dir, -1, 1 ) eq '/';
$file = $dir . $file;
}
#
# Finalize the object file
#
sub finalize_object( $ ) {
my $export = $_[0];
close $object;
$object = 0;
rename $tempfile, $file or fatal_error "Cannot Rename $tempfile to $file: $!";
chmod 0700, $file or fatal_error "Cannot secure $file for execute access";
progress_message3 "Shorewall configuration compiled to $file" unless $export;
}
#
# Create the temporary aux config file.
#
sub create_temp_aux_config() {
eval {
( $object, $tempfile ) = tempfile ( 'tempfileXXXX' , DIR => $dir );
};
die if $@;
}
#
# Finalize the aux config file.
#
sub finalize_aux_config() {
close $object;
$object = 0;
rename $tempfile, "$file.conf" or fatal_error "Cannot Rename $tempfile to $file.conf: $!";
progress_message3 "Shorewall configuration compiled to $file";
}
#
# Set $config{CONFIG_PATH}
#
sub set_config_path( $ ) {
$config{CONFIG_PATH} = shift;
}
#
# Set $debug
#
sub set_debug( $ ) {
$debug = shift;
}
#
# Search the CONFIG_PATH for the passed file
#
sub find_file($)
{
my $filename=$_[0];
return $filename if $filename =~ '/';
my $directory;
for $directory ( @config_path ) {
my $file = "$directory$filename";
return $file if -f $file;
}
"$globals{CONFDIR}/$filename";
}
sub split_list( $$ ) {
my ($list, $type ) = @_;
fatal_error "Invalid $type list ($list)" if $list =~ /^,|,$|,,|!,|,!$/;
split /,/, $list;
}
#
# Pre-process a line from a configuration file.
# ensure that it has an appropriate number of columns.
# supply '-' in omitted trailing columns.
#
sub split_line( $$$ ) {
my ( $mincolumns, $maxcolumns, $description ) = @_;
fatal_error "Shorewall Configuration file entries may not contain single quotes, double quotes, single back quotes or backslashes" if $currentline =~ /["'`\\]/;
fatal_error "Non-ASCII gunk in file" if $currentline =~ /[^\s[:print:]]/;
my @line = split( ' ', $currentline );
my $line = @line;
fatal_error "Invalid $description entry (too many columns)" if $line > $maxcolumns;
$line-- while $line > 0 && $line[$line-1] eq '-';
fatal_error "Invalid $description entry (too few columns)" if $line < $mincolumns;
push @line, '-' while @line < $maxcolumns;
@line;
}
#
# Version of 'split_line' used on files with exceptions
#
sub split_line1( $$$;$ ) {
my ( $mincolumns, $maxcolumns, $description, $nopad) = @_;
fatal_error "Shorewall Configuration file entries may not contain double quotes, single back quotes or backslashes" if $currentline =~ /["`\\]/;
my @line = split( ' ', $currentline );
$nopad = { COMMENT => 0 } unless $nopad;
my $first = $line[0];
my $columns = $nopad->{$first};
if ( defined $columns ) {
fatal_error "Invalid $first entry" if $columns && @line != $columns;
return @line
}
fatal_error "Shorewall Configuration file entries may not contain single quotes" if $currentline =~ /'/;
my $line = @line;
fatal_error "Invalid $description entry (too many columns)" if $line > $maxcolumns;
$line-- while $line > 0 && $line[$line-1] eq '-';
fatal_error "Invalid $description entry (too few columns)" if $line < $mincolumns;
push @line, '-' while @line < $maxcolumns;
@line;
}
#
# Open a file, setting $currentfile. Returns the file's absolute pathname if the file
# exists, is non-empty and was successfully opened. Terminates with a fatal error
# if the file exists, is non-empty, but the open fails.
#
sub do_open_file( $ ) {
my $fname = $_[0];
open $currentfile, '<', $fname or fatal_error "Unable to open $fname: $!";
$currentlinenumber = 0;
$currentfilename = $fname;
}
sub open_file( $ ) {
my $fname = find_file $_[0];
fatal_error 'Internal Error in open_file()' if defined $currentfile;
-f $fname && -s _ ? do_open_file $fname : '';
}
#
# Pop the include stack
#
sub pop_include() {
my $arrayref = pop @includestack;
if ( $arrayref ) {
( $currentfile, $currentfilename, $currentlinenumber ) = @$arrayref;
} else {
$currentfile = undef;
}
}
#
# This function is normally called below in read_a_line() when EOF is reached. Clients of the
# module may also call the function to close the file before EOF
#
sub close_file() {
if ( $currentfile ) {
my $result = close $currentfile;
pop_include;
fatal_error "SHELL Script failed" unless $result;
$first_entry = 0;
}
}
#
# The following two functions allow module clients to nest opens. This happens frequently
# in the Actions module.
#
sub push_open( $ ) {
push @includestack, [ $currentfile, $currentfilename, $currentlinenumber ];
my @a = @includestack;
push @openstack, \@a;
@includestack = ();
$currentfile = undef;
open_file( $_[0] );
}
sub pop_open() {
@includestack = @{pop @openstack};
pop_include;
}
sub shorewall {
unless ( $scriptfile ) {
fatal_error "shorewall() may not be called in this context" unless $currentfile;
$dir ||= '/tmp/';
eval {
( $scriptfile, $scriptfilename ) = tempfile ( 'scriptfileXXXX' , DIR => $dir );
};
fatal_error "Unable to create temporary file in directory $dir" if $@;
}
print $scriptfile "@_\n";
}
#
# We don't announce that we are checking/compiling a file until we determine that the file contains
# at least one non-blank, non-commentary line.
#
# The argument to this function may be either a scalar or a function reference. When the first
# non-blank/non-commentary line is reached:
#
# - if a function reference was passed to first_entry(), that function is called
# - otherwise, the argument to first_entry() is passed to progress_message2().
#
# We do this processing in read_a_line() rather than in the higher-level routines because
# Embedded Shell/Perl scripts are processed out of read_a_line(). If we were to defer announcement
# until we get back to the caller of read_a_line(), we could issue error messages about parsing and
# running scripts in the file before we'd even indicated that we are processing it.
#
sub first_entry( $ ) {
$first_entry = $_[0];
my $reftype = reftype $first_entry;
if ( $reftype ) {
fatal_error "Invalid argument to first_entry()" unless $reftype eq 'CODE';
}
}
sub embedded_shell( $ ) {
my $multiline = shift;
fatal_error "INCLUDEs nested too deeply" if @includestack >= 4;
my ( $command, $linenumber ) = ( "/bin/sh -c '$currentline", $currentlinenumber );
if ( $multiline ) {
#
# Multi-line script
#
fatal_error "Invalid BEGIN SHELL directive" unless $currentline =~ /^\s*$/;
$command .= "\n";
my $last = 0;
while ( <$currentfile> ) {
$currentlinenumber++;
last if $last = s/^\s*END(\s+SHELL)?\s*;?//;
$command .= $_;
}
fatal_error ( "Missing END SHELL" ) unless $last;
fatal_error ( "Invalid END SHELL directive" ) unless /^\s*$/;
}
$command .= q(');
push @includestack, [ $currentfile, $currentfilename, $currentlinenumber ];
$currentfile = undef;
open $currentfile , '-|', $command or fatal_error qq(Shell Command failed);
$currentfilename = "SHELL\@$currentfilename:$currentlinenumber";
$currentline = '';
$currentlinenumber = 0;
}
sub embedded_perl( $ ) {
my $multiline = shift;
my ( $command , $linenumber ) = ( qq(package Shorewall::User;\nno strict;\nuse Shorewall::Config qw/shorewall/;\n# line $currentlinenumber "$currentfilename"\n$currentline), $currentlinenumber );
if ( $multiline ) {
#
# Multi-line script
#
fatal_error "Invalid BEGIN PERL directive" unless $currentline =~ /^\s*$/;
$command .= "\n";
my $last = 0;
while ( <$currentfile> ) {
$currentlinenumber++;
last if $last = s/^\s*END(\s+PERL)?\s*;?//;
$command .= $_;
}
fatal_error ( "Missing END PERL" ) unless $last;
fatal_error ( "Invalid END PERL directive" ) unless /^\s*$/;
}
unless (my $return = eval $command ) {
if ( $@ ) {
#
# Perl found the script offensive or the script itself died
#
$@ =~ s/, <\$currentfile> line \d+//g;
fatal_error1 "$@";
}
unless ( defined $return ) {
fatal_error "Perl Script failed: $!" if $!;
fatal_error "Perl Script failed";
}
fatal_error "Perl Script Returned False";
}
if ( $scriptfile ) {
fatal_error "INCLUDEs nested too deeply" if @includestack >= 4;
close $scriptfile or fatal_error "Internal Error in embedded_perl()";
$scriptfile = undef;
push @includestack, [ $currentfile, $currentfilename, $currentlinenumber ];
$currentfile = undef;
open $currentfile, '<', $scriptfilename or fatal_error "Unable to open Perl Script $scriptfilename";
push @tempfiles, $scriptfilename unless unlink $scriptfilename; #unlink fails on Cygwin
$scriptfilename = '';
$currentfilename = "PERL\@$currentfilename:$linenumber";
$currentline = '';
$currentlinenumber = 0;
}
}
#
# Read a line from the current include stack.
#
# - Ignore blank or comment-only lines.
# - Remove trailing comments.
# - Handle Line Continuation
# - Handle embedded SHELL and PERL scripts
# - Expand shell variables from $ENV.
# - Handle INCLUDE <filename>
#
sub read_a_line() {
while ( $currentfile ) {
$currentline = '';
$currentlinenumber = 0;
while ( <$currentfile> ) {
$currentlinenumber = $. unless $currentlinenumber;
chomp;
#
# Continuation
#
chop $currentline, next if substr( ( $currentline .= $_ ), -1, 1 ) eq '\\';
#
# Remove Trailing Comments -- result might be a blank line
#
$currentline =~ s/#.*$//;
#
# Ignore ( concatenated ) Blank Lines
#
$currentline = '', $currentlinenumber = 0, next if $currentline =~ /^\s*$/;
#
# Line not blank -- Handle any first-entry message/capabilities check
#
if ( $first_entry ) {
reftype( $first_entry ) ? $first_entry->() : progress_message2( $first_entry );
$first_entry = 0;
}
#
# Must check for shell/perl before doing variable expansion
#
if ( $currentline =~ s/^\s*(BEGIN\s+)?SHELL\s*;?// ) {
embedded_shell( $1 );
} elsif ( $currentline =~ s/^\s*(BEGIN\s+)?PERL\s*\;?// ) {
embedded_perl( $1 );
} else {
my $count = 0;
#
# Expand Shell Variables using %ENV
#
# $1 $2 $3 - $4
while ( $currentline =~ m( ^(.*?) \$({)? ([a-zA-Z]\w*) (?(2)}) (.*)$ )x ) {
my $val = $ENV{$3};
unless ( defined $val ) {
fatal_error "Undefined shell variable (\$$3)" unless exists $ENV{$3};
$val = '';
}
$currentline = join( '', $1 , $val , $4 );
fatal_error "Variable Expansion Loop" if ++$count > 100;
}
if ( $currentline =~ /^\s*INCLUDE\s/ ) {
my @line = split ' ', $currentline;
fatal_error "Invalid INCLUDE command" if @line != 2;
fatal_error "INCLUDEs/Scripts nested too deeply" if @includestack >= 4;
my $filename = find_file $line[1];
fatal_error "INCLUDE file $filename not found" unless -f $filename;
fatal_error "Directory ($filename) not allowed in INCLUDE" if -d _;
if ( -s _ ) {
push @includestack, [ $currentfile, $currentfilename, $currentlinenumber ];
$currentfile = undef;
do_open_file $filename;
} else {
$currentlinenumber = 0;
}
$currentline = '';
} else {
return 1;
}
}
}
close_file;
}
}
#
# Simple version of the above. Doesn't do line concatenation, shell variable expansion or INCLUDE processing
#
sub read_a_line1() {
while ( $currentfile ) {
while ( $currentline = <$currentfile> ) {
next if $currentline =~ /^\s*#/;
chomp $currentline;
next if $currentline =~ /^\s*$/;
$currentline =~ s/#.*$//; # Remove Trailing Comments
fatal_error "Non-ASCII gunk in file" if $currentline =~ /[^\s[:print:]]/;
$currentlinenumber = $.;
return 1;
}
close_file;
}
}
#
# Provide the passed default value for the passed configuration variable
#
sub default ( $$ ) {
my ( $var, $val ) = @_;
$config{$var} = $val unless defined $config{$var} && $config{$var} ne '';
}
#
# Provide a default value for a yes/no configuration variable.
#
sub default_yes_no ( $$ ) {
my ( $var, $val ) = @_;
my $curval = "\L$config{$var}";
if ( defined $curval && $curval ne '' ) {
if ( $curval eq 'no' ) {
$config{$var} = '';
} else {
fatal_error "Invalid value for $var ($val)" unless $curval eq 'yes';
}
} else {
$config{$var} = $val;
}
}
my %validlevels = ( DEBUG => 7,
INFO => 6,
NOTICE => 5,
WARNING => 4,
WARN => 4,
ERR => 3,
ERROR => 3,
CRIT => 2,
ALERT => 1,
EMERG => 0,
PANIC => 0,
NONE => '',
ULOG => 'ULOG',
NFLOG => 'NFLOG');
my @suffixes = qw(group range threshold nlgroup cprange qthreshold);
#
# Validate a log level -- Drop the trailing '!' and translate to numeric value if appropriate"
#
sub level_error( $ ) {
fatal_error "Invalid log level ($_[0])";
}
sub validate_level( $ ) {
my $rawlevel = $_[0];
my $level = uc $rawlevel;
if ( defined $level && $level ne '' ) {
$level =~ s/!$//;
my $value = $validlevels{$level};
return $value if defined $value;
return $level if $level =~ /^[0-7]$/;
if ( $level =~ /^(NFLOG|ULOG)[(](.*)[)]$/ ) {
my $olevel = $1;
my @options = split /,/, $2;
my $prefix = lc $olevel;
my $index = $prefix eq 'ulog' ? 3 : 0;
level_error( $level ) if @options > 3;
for ( @options ) {
if ( defined $_ and $_ ne '' ) {
level_error( $level ) unless /^\d+/;
$olevel .= " --${prefix}-$suffixes[$index] $_";
}
$index++;
}
return $olevel;
}
if ( $level =~ /^NFLOG --/ or $level =~ /^ULOG --/ ) {
return $rawlevel;
}
level_error( $rawlevel );
}
'';
}
#
# Validate a log level and supply default
#
sub default_log_level( $$ ) {
my ( $level, $default ) = @_;
my $value = $config{$level};
unless ( defined $value && $value ne '' ) {
$config{$level} = $default;
} else {
$config{$level} = validate_level $value;
}
}
#
# Check a tri-valued variable
#
sub check_trivalue( $$ ) {
my ( $var, $default) = @_;
my $val = "\L$config{$var}";
if ( defined $val ) {
if ( $val eq 'yes' || $val eq 'on' ) {
$config{$var} = 'on';
} elsif ( $val eq 'no' || $val eq 'off' ) {
$config{$var} = 'off';
} elsif ( $val eq 'keep' ) {
$config{$var} = '';
} elsif ( $val eq '' ) {
$config{$var} = $default
} else {
fatal_error "Invalid value ($val) for $var";
}
} else {
$config{var} = $default
}
}
#
# Produce a report of the detected capabilities
#
sub report_capability( $ ) {
my $cap = $_[0];
print " $capdesc{$cap}: ";
if ( $cap eq 'CAPVERSION' ) {
my $version = $capabilities{CAPVERSION};
printf "%d.%d.%d\n", int( $version / 10000 ) , int ( ( $version % 10000 ) / 100 ) , int ( $version % 100 );
} else {
print $capabilities{$cap} ? "Available\n" : "Not Available\n";
}
}
sub report_capabilities() {
if ( $verbose > 1 ) {
print "Shorewall has detected the following capabilities:\n";
for my $cap ( sort { $capdesc{$a} cmp $capdesc{$b} } keys %capabilities ) {
report_capability $cap;
}
}
}
#
# Search the current PATH for the passed executable
#
sub which( $ ) {
my $prog = $_[0];
for ( split /:/, $config{PATH} ) {
return "$_/$prog" if -x "$_/$prog";
}
'';
}
#
# Load the kernel modules defined in the 'modules' file.
#
sub load_kernel_modules( ) {
my $moduleloader = which( 'modprobe' ) || ( which 'insmod' );
my $modulesdir = $config{MODULESDIR};
unless ( $modulesdir ) {
my $uname = `uname -r`;
fatal_error "The command 'uname -r' failed" unless $? == 0;
chomp $uname;
$modulesdir = "/lib/modules/$uname/kernel/net/ipv4/netfilter:/lib/modules/$uname/kernel/net/netfilter";
}
my @moduledirectories = split /:/, $modulesdir;
if ( $moduleloader && open_file 'modules' ) {
my %loadedmodules;
$loadedmodules{$_}++ for split_list( $config{DONT_LOAD}, 'module' );
progress_message "Loading Modules...";
open LSMOD , '-|', 'lsmod' or fatal_error "Can't run lsmod";
while ( <LSMOD> ) {
my $module = ( split( /\s+/, $_, 2 ) )[0];
$loadedmodules{$module}++ unless $module eq 'Module'
}
close LSMOD;
$config{MODULE_SUFFIX} = 'o gz ko o.gz ko.gz' unless $config{MODULES_SUFFIX};
my @suffixes = split /\s+/ , $config{MODULE_SUFFIX};
while ( read_a_line ) {
fatal_error "Invalid modules file entry" unless ( $currentline =~ /^loadmodule\s+([a-zA-Z]\w*)\s*(.*)$/ );
my ( $module, $arguments ) = ( $1, $2 );
unless ( $loadedmodules{ $module } ) {
for my $directory ( @moduledirectories ) {
for my $suffix ( @suffixes ) {
my $modulefile = "$directory/$module.$suffix";
if ( -f $modulefile ) {
if ( $moduleloader eq 'insmod' ) {
system ("insmod $modulefile $arguments" );
} else {
system( "modprobe $module $arguments" );
}
$loadedmodules{ $module } = 1;
}
}
}
}
}
}
}
#
# Q[uie]t version of system(). Returns true for success
#
sub qt( $ ) {
system( "@_ > /dev/null 2>&1" ) == 0;
}
sub qt1( $ ) {
1 while system( "@_ > /dev/null 2>&1" ) == 4;
$? == 0;
}
#
# Determine which optional facilities are supported by iptables/netfilter
#
sub determine_capabilities( $ ) {
my $iptables = $_[0];
my $pid = $$;
my $sillyname = "fooX$pid";
my $sillyname1 = "foo1X$pid";
$capabilities{NAT_ENABLED} = qt1( "$iptables -t nat -L -n" );
$capabilities{MANGLE_ENABLED} = qt1( "$iptables -t mangle -L -n" );
qt1( "$iptables -N $sillyname" );
qt1( "$iptables -N $sillyname1" );
$capabilities{CONNTRACK_MATCH} = qt1( "$iptables -A $sillyname -m conntrack --ctorigdst 192.168.1.1 -j ACCEPT" );
if ( $capabilities{CONNTRACK_MATCH} ) {
$capabilities{NEW_CONNTRACK_MATCH} = qt1( "$iptables -A $sillyname -m conntrack -p tcp --ctorigdstport 22 -j ACCEPT" );
$capabilities{OLD_CONNTRACK_MATCH} = ! qt1( "$iptables -A $sillyname -m conntrack ! --ctorigdstport 1.2.3.4" );
}
if ( qt1( "$iptables -A $sillyname -p tcp -m multiport --dports 21,22 -j ACCEPT" ) ) {
$capabilities{MULTIPORT} = 1;
$capabilities{KLUDGEFREE} = qt1( "$iptables -A $sillyname -p tcp -m multiport --sports 60 -m multiport --dports 99 -j ACCEPT" );
}
$capabilities{XMULTIPORT} = qt1( "$iptables -A $sillyname -p tcp -m multiport --dports 21:22 -j ACCEPT" );
$capabilities{POLICY_MATCH} = qt1( "$iptables -A $sillyname -m policy --pol ipsec --mode tunnel --dir in -j ACCEPT" );
if ( qt1( "$iptables -A $sillyname -m physdev --physdev-in eth0 -j ACCEPT" ) ) {
$capabilities{PHYSDEV_MATCH} = 1;
$capabilities{PHYSDEV_BRIDGE} = qt1( "$iptables -A $sillyname -m physdev --physdev-is-bridged --physdev-in eth0 --physdev-out eth1 -j ACCEPT" );
unless ( $capabilities{KLUDGEFREE} ) {
$capabilities{KLUDGEFREE} = qt1( "$iptables -A $sillyname -m physdev --physdev-in eth0 -m physdev --physdev-out eth0 -j ACCEPT" );
}
}
if ( qt1( "$iptables -A $sillyname -m iprange --src-range 192.168.1.5-192.168.1.124 -j ACCEPT" ) ) {
$capabilities{IPRANGE_MATCH} = 1;
unless ( $capabilities{KLUDGEFREE} ) {
$capabilities{KLUDGEFREE} = qt1( "$iptables -A $sillyname -m iprange --src-range 192.168.1.5-192.168.1.124 -m iprange --dst-range 192.168.1.5-192.168.1.124 -j ACCEPT" );
}
}
$capabilities{RECENT_MATCH} = qt1( "$iptables -A $sillyname -m recent --update -j ACCEPT" );
$capabilities{OWNER_MATCH} = qt1( "$iptables -A $sillyname -m owner --uid-owner 0 -j ACCEPT" );
if ( qt1( "$iptables -A $sillyname -m connmark --mark 2 -j ACCEPT" )) {
$capabilities{CONNMARK_MATCH} = 1;
$capabilities{XCONNMARK_MATCH} = qt1( "$iptables -A $sillyname -m connmark --mark 2/0xFF -j ACCEPT" );
}
$capabilities{IPP2P_MATCH} = qt1( "$iptables -A $sillyname -p tcp -m ipp2p --edk -j ACCEPT" );
$capabilities{LENGTH_MATCH} = qt1( "$iptables -A $sillyname -m length --length 10:20 -j ACCEPT" );
$capabilities{ENHANCED_REJECT} = qt1( "$iptables -A $sillyname -j REJECT --reject-with icmp-host-prohibited" );
$capabilities{COMMENTS} = qt1( qq($iptables -A $sillyname -j ACCEPT -m comment --comment "This is a comment" ) );
if ( $capabilities{MANGLE_ENABLED} ) {
qt1( "$iptables -t mangle -N $sillyname" );
if ( qt1( "$iptables -t mangle -A $sillyname -j MARK --set-mark 1" ) ) {
$capabilities{MARK} = 1;
$capabilities{XMARK} = qt1( "$iptables -t mangle -A $sillyname -j MARK --and-mark 0xFF" );
}
if ( qt1( "$iptables -t mangle -A $sillyname -j CONNMARK --save-mark" ) ) {
$capabilities{CONNMARK} = 1;
$capabilities{XCONNMARK} = qt1( "$iptables -t mangle -A $sillyname -j CONNMARK --save-mark --mask 0xFF" );
}
$capabilities{CLASSIFY_TARGET} = qt1( "$iptables -t mangle -A $sillyname -j CLASSIFY --set-class 1:1" );
qt1( "$iptables -t mangle -F $sillyname" );
qt1( "$iptables -t mangle -X $sillyname" );
$capabilities{MANGLE_FORWARD} = qt1( "$iptables -t mangle -L FORWARD -n" );
}
$capabilities{RAW_TABLE} = qt1( "$iptables -t raw -L -n" );
if ( which 'ipset' ) {
qt( "ipset -X $sillyname" );
if ( qt( "ipset -N $sillyname iphash" ) ) {
if ( qt1( "$iptables -A $sillyname -m set --set $sillyname src -j ACCEPT" ) ) {
qt1( "$iptables -D $sillyname -m set --set $sillyname src -j ACCEPT" );
$capabilities{IPSET_MATCH} = 1;
}
qt( "ipset -X $sillyname" );
}
}
$capabilities{USEPKTTYPE} = qt1( "$iptables -A $sillyname -m pkttype --pkt-type broadcast -j ACCEPT" );
$capabilities{ADDRTYPE} = qt1( "$iptables -A $sillyname -m addrtype --src-type BROADCAST -j ACCEPT" );
$capabilities{TCPMSS_MATCH} = qt1( "$iptables -A $sillyname -p tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1000:1500 -j ACCEPT" );
$capabilities{HASHLIMIT_MATCH} = qt1( "$iptables -A $sillyname -m hashlimit --hashlimit 4 --hashlimit-burst 5 --hashlimit-name fooX1234 --hashlimit-mode dstip -j ACCEPT" );
$capabilities{NFQUEUE_TARGET} = qt1( "$iptables -A $sillyname -j NFQUEUE --queue-num 4" );
$capabilities{REALM_MATCH} = qt1( "$iptables -A $sillyname -m realm --realm 1" );
$capabilities{HELPER_MATCH} = qt1( "$iptables -A $sillyname -m helper --helper \"ftp\"" );
$capabilities{CONNLIMIT_MATCH} = qt1( "$iptables -A $sillyname -m connlimit --connlimit-above 8" );
$capabilities{TIME_MATCH} = qt1( "$iptables -A $sillyname -m time --timestart 11:00" );
$capabilities{GOTO_SUPPORT} = qt1( "$iptables -A $sillyname -g $sillyname1" );
qt1( "$iptables -F $sillyname" );
qt1( "$iptables -X $sillyname" );
qt1( "$iptables -F $sillyname1" );
qt1( "$iptables -X $sillyname1" );
$capabilities{CAPVERSION} = $globals{CAPVERSION};
}
#
# Require the passed capability
#
sub require_capability( $$$ ) {
my ( $capability, $description, $singular ) = @_;
fatal_error "$description require${singular} $capdesc{$capability} in your kernel and iptables" unless $capabilities{$capability};
}
#
# Set default config path
#
sub ensure_config_path() {
my $f = "$globals{SHAREDIR}/configpath";
$globals{CONFDIR} = '/usr/share/shorewall/configfiles/' if $> != 0;
unless ( $config{CONFIG_PATH} ) {
fatal_error "$f does not exist" unless -f $f;
open_file $f;
$ENV{CONFDIR} = $globals{CONFDIR};
while ( read_a_line ) {
if ( $currentline =~ /^\s*([a-zA-Z]\w*)=(.*?)\s*$/ ) {
my ($var, $val) = ($1, $2);
$config{$var} = ( $val =~ /\"([^\"]*)\"$/ ? $1 : $val ) if exists $config{$var};
} else {
fatal_error "Unrecognized entry";
}
}
fatal_error "CONFIG_PATH not found in $f" unless $config{CONFIG_PATH};
}
@config_path = split /:/, $config{CONFIG_PATH};
for ( @config_path ) {
$_ .= '/' unless m|/$|;
}
if ( $shorewall_dir ) {
$shorewall_dir = getcwd if $shorewall_dir =~ m|^(\./*)+$|;
$shorewall_dir .= '/' unless $shorewall_dir =~ m|/$|;
unshift @config_path, $shorewall_dir if $shorewall_dir ne $config_path[0];
$config{CONFIG_PATH} = join ':', @config_path;
}
}
#
# Set $shorewall_dir
#
sub set_shorewall_dir( $ ) {
$shorewall_dir = shift;
ensure_config_path;
}
#
# Small functions called by get_configuration. We separate them so profiling is more useful
#
sub process_shorewall_conf() {
my $file = find_file 'shorewall.conf';
if ( -f $file ) {
if ( -r _ ) {
open_file $file;
while ( read_a_line ) {
if ( $currentline =~ /^\s*([a-zA-Z]\w*)=(.*?)\s*$/ ) {
my ($var, $val) = ($1, $2);
unless ( exists $config{$var} ) {
warning_message "Unknown configuration option ($var) ignored";
next;
}
$config{$var} = ( $val =~ /\"([^\"]*)\"$/ ? $1 : $val );
} else {
fatal_error "Unrecognized entry";
}
}
} else {
fatal_error "Cannot read $file (Hint: Are you root?)";
}
} else {
fatal_error "$file does not exist!";
}
}
#
# Process the records in the capabilities file
#
sub read_capabilities() {
while ( read_a_line1 ) {
if ( $currentline =~ /^([a-zA-Z]\w*)=(.*)$/ ) {
my ($var, $val) = ($1, $2);
unless ( exists $capabilities{$var} ) {
warning_message "Unknown capability ($var) ignored";
next;
}
$capabilities{$var} = $val =~ /^\"([^\"]*)\"$/ ? $1 : $val;
} else {
fatal_error "Unrecognized capabilities entry";
}
}
if ( $capabilities{CAPVERSION} ) {
warning_message "Your capabilities file is out of date -- it does not contain all of the capabilities defined by Shorewall version $globals{VERSION}" unless $capabilities{CAPVERSION} >= $globals{CAPVERSION};
} else {
warning_message "Your capabilities file may not contain all of the capabilities defined by Shorewall version $globals{VERSION}";
}
}
#
# Get the system's capabilities, either by probing or by reading a capabilities file
#
sub get_capabilities( $ ) {
my $export = $_[0];
if ( ! $export && $> == 0 ) { # $> == $EUID
my $iptables = $config{IPTABLES};
if ( $iptables ) {
fatal_error "IPTABLES=$iptables does not exist or is not executable" unless -x $iptables;
} else {
fatal_error "Can't find iptables executable" unless $iptables = which 'iptables';
}
my $iptables_restore=$iptables . '-restore';
fatal_error "$iptables_restore does not exist or is not executable" unless -x $iptables_restore;
load_kernel_modules;
if ( open_file 'capabilities' ) {
read_capabilities;
} else {
determine_capabilities $iptables;
}
} else {
unless ( open_file 'capabilities' ) {
fatal_error "The -e compiler option requires a capabilities file" if $export;
fatal_error "Compiling under non-root uid requires a capabilities file";
}
read_capabilities;
}
}
#
# Deal with options that we no longer support
#
sub unsupported_yes_no( $ ) {
my $option = shift;
default_yes_no $option, '';
fatal_error "$option=Yes is not supported by Shorewall-perl $globals{VERSION}" if $config{$option};
}
#
# - Read the shorewall.conf file
# - Read the capabilities file, if any
# - establish global hashes %config , %globals and %capabilities
#
sub get_configuration( $ ) {
my $export = $_[0];
$globals{EXPORT} = $export;
our ( $once, @originalinc );
@originalinc = @INC unless $once++;
ensure_config_path;
process_shorewall_conf;
ensure_config_path;
@INC = @originalinc;
unshift @INC, @config_path;
default 'PATH' , '/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin';
default 'MODULE_PREFIX', 'o gz ko o.gz ko.gz';
get_capabilities( $export );
$globals{ORIGINAL_POLICY_MATCH} = $capabilities{POLICY_MATCH};
if ( $config{LOGRATE} || $config{LOGBURST} ) {
if ( defined $config{LOGRATE} ) {
fatal_error"Invalid LOGRATE ($config{LOGRATE})" unless $config{LOGRATE} =~ /^\d+\/(second|minute)$/;
}
if ( defined $config{LOGBURST} ) {
fatal_error"Invalid LOGBURST ($config{LOGBURST})" unless $config{LOGBURST} =~ /^\d+$/;
}
$globals{LOGLIMIT} = '-m limit ';
$globals{LOGLIMIT} .= "--limit $config{LOGRATE} " if defined $config{LOGRATE};
$globals{LOGLIMIT} .= "--limit-burst $config{LOGBURST} " if defined $config{LOGBURST};
} else {
$globals{LOGLIMIT} = '';
}
check_trivalue ( 'IP_FORWARDING', 'on' );
check_trivalue ( 'ROUTE_FILTER', '' );
check_trivalue ( 'LOG_MARTIANS', 'on' );
default 'STARTUP_LOG' , '';
if ( $config{STARTUP_LOG} ne '' ) {
if ( defined $config{LOG_VERBOSITY} ) {
if ( $config{LOG_VERBOSITY} eq '' ) {
$config{LOG_VERBOSITY} = 2;
} else {
my $val = numeric_value( $config{LOG_VERBOSITY} );
fatal_error "Invalid LOG_VERBOSITY ($config{LOG_VERBOSITY} )" unless defined( $val ) && ( $val >= -1 ) && ( $val <= 2 );
$config{STARTUP_LOG} = '' if $config{LOG_VERBOSITY} < 0;
}
} else {
$config{LOG_VERBOSITY} = 2;
}
} else {
$config{LOG_VERBOSITY} = -1;
}
default_yes_no 'ADD_IP_ALIASES' , 'Yes';
default_yes_no 'ADD_SNAT_ALIASES' , '';
default_yes_no 'DETECT_DNAT_IPADDRS' , '';
default_yes_no 'DETECT_DNAT_IPADDRS' , '';
default_yes_no 'CLEAR_TC' , 'Yes';
if ( defined $config{CLAMPMSS} ) {
default_yes_no 'CLAMPMSS' , '' unless $config{CLAMPMSS} =~ /^\d+$/;
} else {
$config{CLAMPMSS} = '';
}
unless ( $config{ADD_IP_ALIASES} || $config{ADD_SNAT_ALIASES} ) {
$config{RETAIN_ALIASES} = '';
} else {
default_yes_no 'RETAIN_ALIASES' , '';
}
default_yes_no 'ADMINISABSENTMINDED' , '';
default_yes_no 'BLACKLISTNEWONLY' , '';
if ( defined $config{IPV6} ) {
if ( $config{IPV6} =~ /on/i ) {
$config{IPV6} = 'On';
} elsif ( $config{IPV6} =~ /off/i ) {
$config{IPV6} = 'Off';
} elsif ( $config{IPV6} =~ /keep/i ) {
$config{IPV6} = '';
}
} else {
$config{IPV6} = 'Off';
}
default_yes_no 'DISABLE_IPV6' , '';
fatal_error "Incompatible settings of IPV6 (On) and DISABLE_IPV6 (Yes)" if $config{IPV6} eq 'On' && $config{DISABLE_IPV6} eq 'Yes';
unsupported_yes_no 'DYNAMIC_ZONES';
unsupported_yes_no 'BRIDGING';
unsupported_yes_no 'SAVE_IPSETS';
unsupported_yes_no 'MAPOLDACTIONS';
default_yes_no 'STARTUP_ENABLED' , 'Yes';
default_yes_no 'DELAYBLACKLISTLOAD' , '';
warning_message 'DELAYBLACKLISTLOAD=Yes is not supported by Shorewall-perl ' . $globals{VERSION} if $config{DELAYBLACKLISTLOAD};
default_yes_no 'LOGTAGONLY' , ''; $globals{LOGTAGONLY} = $config{LOGTAGONLY};
default_yes_no 'RFC1918_STRICT' , '';
default_yes_no 'FASTACCEPT' , '';
fatal_error "BLACKLISTNEWONLY=No may not be specified with FASTACCEPT=Yes" if $config{FASTACCEPT} && ! $config{BLACKLISTNEWONLY};
default_yes_no 'IMPLICIT_CONTINUE' , '';
default_yes_no 'HIGH_ROUTE_MARKS' , '';
default_yes_no 'TC_EXPERT' , '';
default_yes_no 'USE_ACTIONS' , 'Yes';
warning_message 'USE_ACTIONS=No is not supported by Shorewall-perl ' . $globals{VERSION} unless $config{USE_ACTIONS};
default_yes_no 'EXPORTPARAMS' , '';
default_yes_no 'EXPAND_POLICIES' , '';
default_yes_no 'KEEP_RT_TABLES' , '';
default_yes_no 'DELETE_THEN_ADD' , 'Yes';
default_yes_no 'AUTO_COMMENT' , 'Yes';
default_yes_no 'MULTICAST' , '';
default_yes_no 'MARK_IN_FORWARD_CHAIN' , '';
default_yes_no 'MANGLE_ENABLED' , 'Yes';
default_yes_no 'NULL_ROUTE_RFC1918' , '';
default_yes_no 'USE_DEFAULT_RT' , '';
$capabilities{XCONNMARK} = '' unless $capabilities{XCONNMARK_MATCH} and $capabilities{XMARK};
default 'BLACKLIST_DISPOSITION' , 'DROP';
default_log_level 'BLACKLIST_LOGLEVEL', '';
default_log_level 'MACLIST_LOG_LEVEL', '';
default_log_level 'TCP_FLAGS_LOG_LEVEL', '';
default_log_level 'RFC1918_LOG_LEVEL', 6;
default_log_level 'SMURF_LOG_LEVEL', '';
default_log_level 'LOGALLNEW', '';
my $val;
$globals{MACLIST_TARGET} = 'reject';
if ( $val = $config{MACLIST_DISPOSITION} ) {
unless ( $val eq 'REJECT' ) {
if ( $val eq 'DROP' ) {
$globals{MACLIST_TARGET} = 'DROP';
} elsif ( $val eq 'ACCEPT' ) {
$globals{MACLIST_TARGET} = 'RETURN';
} else {
fatal_error "Invalid value ($config{MACLIST_DISPOSITION}) for MACLIST_DISPOSITION"
}
}
} else {
$config{MACLIST_DISPOSITION} = 'REJECT';
}
if ( $val = $config{MACLIST_TABLE} ) {
if ( $val eq 'mangle' ) {
fatal_error 'MACLIST_DISPOSITION=REJECT is not allowed with MACLIST_TABLE=mangle' if $config{MACLIST_DISPOSITION} eq 'REJECT';
} else {
fatal_error "Invalid value ($val) for MACLIST_TABLE option" unless $val eq 'filter';
}
} else {
default 'MACLIST_TABLE' , 'filter';
}
if ( $val = $config{TCP_FLAGS_DISPOSITION} ) {
fatal_error "Invalid value ($config{TCP_FLAGS_DISPOSITION}) for TCP_FLAGS_DISPOSITION" unless $val =~ /^(REJECT|ACCEPT|DROP)$/;
} else {
$config{TCP_FLAGS_DISPOSITION} = 'DROP';
}
default 'TC_ENABLED' , 'Internal';
$val = "\L$config{TC_ENABLED}";
if ( $val eq 'yes' ) {
my $file = find_file 'tcstart';
fatal_error "Unable to find tcstart file" unless -f $file;
$globals{TC_SCRIPT} = $file;
} elsif ( $val eq 'internal' ) {
$config{TC_ENABLED} = 'Internal';
} else {
fatal_error "Invalid value ($config{TC_ENABLED}) for TC_ENABLED" unless $val eq 'no';
$config{TC_ENABLED} = '';
}
fatal_error "TC_ENABLED=$config{TC_ENABLED} is not allowed with MANGLE_ENABLED=No" if $config{TC_ENABLED} && ! $config{MANGLE_ENABLED};
default 'RESTOREFILE' , 'restore';
default 'IPSECFILE' , 'zones';
default 'DROP_DEFAULT' , 'Drop';
default 'REJECT_DEFAULT' , 'Reject';
default 'QUEUE_DEFAULT' , 'none';
default 'NFQUEUE_DEFAULT' , 'none';
default 'ACCEPT_DEFAULT' , 'none';
default 'OPTIMIZE' , 0;
fatal_error 'IPSECFILE=ipsec is not supported by Shorewall-perl ' . $globals{VERSION} unless $config{IPSECFILE} eq 'zones';
for my $default qw/DROP_DEFAULT REJECT_DEFAULT QUEUE_DEFAULT NFQUEUE_DEFAULT ACCEPT_DEFAULT/ {
$config{$default} = 'none' if "\L$config{$default}" eq 'none';
}
$val = $config{OPTIMIZE};
fatal_error "Invalid OPTIMIZE value ($val)" unless ( $val eq '0' ) || ( $val eq '1' );
fatal_error "Invalid IPSECFILE value ($config{IPSECFILE}" unless $config{IPSECFILE} eq 'zones';
$globals{MARKING_CHAIN} = $config{MARK_IN_FORWARD_CHAIN} ? 'tcfor' : 'tcpre';
if ( $val = $config{LOGFORMAT} ) {
my $result;
eval {
if ( $val =~ /%d/ ) {
$globals{LOGRULENUMBERS} = 'Yes';
$result = sprintf "$val", 'fooxx2barxx', 1, 'ACCEPT';
} else {
$result = sprintf "$val", 'fooxx2barxx', 'ACCEPT';
}
};
fatal_error "Invalid LOGFORMAT ($val)" if $@;
fatal_error "LOGFORMAT string is longer than 29 characters ($val)" if length $result > 29;
$globals{MAXZONENAMELENGTH} = int ( 5 + ( ( 29 - (length $result ) ) / 2) );
} else {
$config{LOGFORMAT}='Shorewall:%s:%s:';
$globals{MAXZONENAMELENGTH} = 5;
}
if ( $config{LOCKFILE} ) {
my ( $file, $dir, $suffix );
eval {
( $file, $dir, $suffix ) = fileparse( $config{LOCKFILE} );
};
die $@ if $@;
fatal_error "LOCKFILE=$config{LOCKFILE}: Directory $dir does not exist" unless $export or -d $dir;
} else {
$config{LOCKFILE} = '';
}
}
#
# The values of the options in @propagateconfig are copied to the object file in OPTION=<value> format.
#
sub propagateconfig() {
for my $option ( @propagateconfig ) {
my $value = $config{$option} || '';
emit "$option=\"$value\"";
}
for my $option ( @propagateenv ) {
my $value = $globals{$option} || '';
emit "$option=\"$value\"";
}
}
#
# Add a shell script file to the output script -- Return true if the
# file exists and is not in /usr/share/shorewall/.
#
sub append_file( $ ) {
my $user_exit = find_file $_[0];
my $result = 0;
unless ( $user_exit =~ /^($globals{SHAREDIR})/ ) {
if ( -f $user_exit ) {
$result = 1;
save_progress_message "Processing $user_exit ...";
copy1 $user_exit;
}
}
$result;
}
#
# Run a Perl extension script
#
sub run_user_exit( $ ) {
my $chainref = $_[0];
my $file = find_file $chainref->{name};
if ( -f $file ) {
progress_message "Processing $file...";
my $command = qq(package Shorewall::User;\nno strict;\n# line 1 "$file"\n) . `cat $file`;
unless (my $return = eval $command ) {
fatal_error "Couldn't parse $file: $@" if $@;
unless ( defined $return ) {
fatal_error "Couldn't do $file: $!" if $!;
fatal_error "Couldn't do $file";
}
fatal_error "$file returned a false value";
}
}
}
sub run_user_exit1( $ ) {
my $file = find_file $_[0];
if ( -f $file ) {
progress_message "Processing $file...";
#
# File may be empty -- in which case eval would fail
#
push_open $file;
if ( read_a_line1 ) {
close_file;
my $command = qq(package Shorewall::User;\n# line 1 "$file"\n) . `cat $file`;
unless (my $return = eval $command ) {
fatal_error "Couldn't parse $file: $@" if $@;
unless ( defined $return ) {
fatal_error "Couldn't do $file: $!" if $!;
fatal_error "Couldn't do $file";
}
fatal_error "$file returned a false value";
}
} else {
pop_open;
}
}
}
sub run_user_exit2( $$ ) {
my ($file, $chainref) = ( find_file $_[0], $_[1] );
if ( -f $file ) {
progress_message "Processing $file...";
#
# File may be empty -- in which case eval would fail
#
push_open $file;
if ( read_a_line1 ) {
close_file;
unless (my $return = eval `cat $file` ) {
fatal_error "Couldn't parse $file: $@" if $@;
unless ( defined $return ) {
fatal_error "Couldn't do $file: $!" if $!;
fatal_error "Couldn't do $file";
}
fatal_error "$file returned a false value";
}
}
pop_open;
}
}
#
# Generate the aux config file for Shorewall Lite
#
sub generate_aux_config() {
sub conditionally_add_option( $ ) {
my $option = $_[0];
my $value = $config{$option};
emit "[ -n \"\${$option:=$value}\" ]" if $value ne '';
}
sub conditionally_add_option1( $ ) {
my $option = $_[0];
my $value = $config{$option};
emit "$option=\"$value\"" if $value;
}
create_temp_aux_config;
my $date = localtime;
emit "#\n# Shorewall auxiliary configuration file created by Shorewall-perl version $globals{VERSION} - $date\n#";
for my $option qw(VERBOSITY LOGFILE LOGFORMAT IPTABLES PATH SHOREWALL_SHELL SUBSYSLOCK LOCKFILE RESTOREFILE SAVE_IPSETS) {
conditionally_add_option $option;
}
conditionally_add_option1 'TC_ENABLED';
finalize_aux_config;
}
END {
#
# Close files first in case we're running under Cygwin
#
close $object if $object;
close $scriptfile if $scriptfile;
close $log if $log;
#
# Unlink temporary files
#
unlink $tempfile if $tempfile;
unlink $scriptfilename if $scriptfilename;
unlink $_ for @tempfiles;
}
1;
View Git Blame Copy Permalink