forked from extern/shorewall_code
248b26a7d8
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@3264 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
867 lines
29 KiB
Plaintext
Executable File
867 lines
29 KiB
Plaintext
Executable File
###############################################################################
|
|
# /etc/shorewall/shorewall.conf V3.0 - Change the following variables to
|
|
# match your setup
|
|
#
|
|
# This program is under GPL [http://www.gnu.org/copyleft/gpl.htm]
|
|
#
|
|
# This file should be placed in /etc/shorewall
|
|
#
|
|
# (c) 1999,2000,2001,2002,2003,2004,2005 - Tom Eastep (teastep@shorewall.net)
|
|
#
|
|
# >>>>>>>>>>>>> NOTE TO USERS UPGRADING FROM 2.x <<<<<<<<<<<<<<<<<<
|
|
#
|
|
# Most problems associated with upgrades come from two causes:
|
|
#
|
|
# - The user didn't read and follow the migration considerations in the
|
|
# release notes.
|
|
#
|
|
# - The user mis-handled the /etc/shorewall/shorewall.conf file during
|
|
# upgrade. Shorewall is designed to allow the default behavior of
|
|
# the product to evolve over time. To make this possible, the design
|
|
# assumes that you will not replace your current shorewall.conf file
|
|
# during upgrades. If you feel absolutely compelled to have the latest
|
|
# comments and options in your shorewall.conf then you must proceed
|
|
# carefully.
|
|
#
|
|
# The new/changed options in shorewall 3.0 are listed below. If you don't
|
|
# want to convert to the new 3.0 format for /etc/shorewall/zones and you
|
|
# don't want to replace your current rules that use 2.x builtin actions,
|
|
# then if you plan to use this copy of shorewall.conf file then you must
|
|
# change it as follows:
|
|
#
|
|
# - SPECFILE
|
|
#
|
|
# This file has IPSECFILE=zones. You want to set it to IPSECFILE=ipsec.
|
|
# This will indicate that your /etc/shorewall/zones file is in the
|
|
# pre-3.0 format.
|
|
#
|
|
# - FW
|
|
#
|
|
# This file has FW undefined. If you have named your firewall zone
|
|
# something other than 'fw' then you must set FW accordingly.
|
|
#
|
|
# - MAPOLDACTIONS
|
|
#
|
|
# This file has MAPOLDACTIONS=No. You want to set it to
|
|
# MAPOLDACTIONS=Yes in order to permit rules that use the 2.x builtin
|
|
# actions such as AllowPing to continue to work.
|
|
###############################################################################
|
|
# S T A R T U P E N A B L E D
|
|
###############################################################################
|
|
#
|
|
# Once you have configured Shorewall, you may change the setting of
|
|
# this variable to 'Yes'
|
|
#
|
|
|
|
STARTUP_ENABLED=No
|
|
|
|
###############################################################################
|
|
# L O G G I N G
|
|
###############################################################################
|
|
#
|
|
# General note about log levels. Log levels are a method of describing
|
|
# to syslog (8) the importance of a message and a number of parameters
|
|
# in this file have log levels as their value.
|
|
#
|
|
# These levels are defined by syslog and are used to determine the destination
|
|
# of the messages through entries in /etc/syslog.conf (5). The syslog
|
|
# documentation refers to these as "priorities"; Netfilter calls them "levels"
|
|
# and Shorewall also uses that term.
|
|
#
|
|
# Valid levels are:
|
|
#
|
|
# 7 debug
|
|
# 6 info
|
|
# 5 notice
|
|
# 4 warning
|
|
# 3 err
|
|
# 2 crit
|
|
# 1 alert
|
|
# 0 emerg
|
|
#
|
|
# For most Shorewall logging, a level of 6 (info) is appropriate. Shorewall
|
|
# log messages are generated by NetFilter and are logged using facility
|
|
# 'kern' and the level that you specifify. If you are unsure of the level
|
|
# to choose, 6 (info) is a safe bet. You may specify levels by name or by
|
|
# number.
|
|
#
|
|
# If you have built your kernel with ULOG target support, you may also
|
|
# specify a log level of ULOG (must be all caps). Rather than log its
|
|
# messages to syslogd, Shorewall will direct netfilter to log the messages
|
|
# via the ULOG target which will send them to a process called 'ulogd'.
|
|
# ulogd is available with most Linux distributions (although it probably isn't
|
|
# installed by default). Ulogd is also available from
|
|
# http://www.gnumonks.org/projects/ulogd and can be configured to log all
|
|
# Shorewall message to their own log file
|
|
###############################################################################
|
|
#
|
|
# LOG FILE LOCATION
|
|
#
|
|
# This variable tells the /sbin/shorewall program where to look for Shorewall
|
|
# log messages. If not set or set to an empty string (e.g., LOGFILE="") then
|
|
# /var/log/messages is assumed.
|
|
#
|
|
# WARNING: The LOGFILE variable simply tells the 'shorewall' program where to
|
|
# look for Shorewall messages.It does NOT control the destination for
|
|
# these messages. For information about how to do that, see
|
|
#
|
|
# http://www.shorewall.net/shorewall_logging.html
|
|
#
|
|
|
|
LOGFILE=/var/log/messages
|
|
|
|
#
|
|
# LOG FORMAT
|
|
#
|
|
# Shell 'printf' Formatting template for the --log-prefix value in log messages
|
|
# generated by Shorewall to identify Shorewall log messages. The supplied
|
|
# template is expected to accept either two or three arguments; the first is
|
|
# the chain name, the second (optional) is the logging rule number within that
|
|
# chain and the third is the ACTION specifying the disposition of the packet
|
|
# being logged. You must use the %d formatting type for the rule number; if
|
|
# your template does not contain %d then the rule number will not be included.
|
|
#
|
|
# If you want to integrate Shorewall with fireparse, then set LOGFORMAT as:
|
|
#
|
|
# LOGFORMAT="fp=%s:%d a=%s "
|
|
#
|
|
# If not specified or specified as empty (LOGFORMAT="") then the value
|
|
# "Shorewall:%s:%s:" is assumed.
|
|
#
|
|
# CAUTION: /sbin/shorewall uses the leading part of the LOGFORMAT string (up
|
|
# to but not including the first '%') to find log messages in the 'show log',
|
|
# 'status' and 'hits' commands. This part should not be omitted (the
|
|
# LOGFORMAT should not begin with "%") and the leading part should be
|
|
# sufficiently unique for /sbin/shorewall to identify Shorewall messages.
|
|
#
|
|
|
|
LOGFORMAT="Shorewall:%s:%s:"
|
|
|
|
#
|
|
# LOG FORMAT Continued
|
|
#
|
|
# Using the default LOGFORMAT, chain names may not exceed 11 characters or
|
|
# truncation of the log prefix may occur. Longer chain names may be used with
|
|
# log tags if you set LOGTAGONLY=Yes. With LOGTAGONLY=Yes, if a log tag is
|
|
# specified then the tag is included in the log prefix in place of the chain
|
|
# name.
|
|
#
|
|
|
|
LOGTAGONLY=No
|
|
|
|
#
|
|
# LOG RATE LIMITING
|
|
#
|
|
# The next two variables can be used to control the amount of log output
|
|
# generated. LOGRATE is expressed as a number followed by an optional
|
|
# `/second', `/minute', `/hour', or `/day' suffix and specifies the maximum
|
|
# rate at which a particular message will occur. LOGBURST determines the
|
|
# maximum initial burst size that will be logged. If set empty, the default
|
|
# value of 5 will be used.
|
|
#
|
|
# If BOTH variables are set empty then logging will not be rate-limited.
|
|
#
|
|
# Example:
|
|
#
|
|
# LOGRATE=10/minute
|
|
# LOGBURST=5
|
|
#
|
|
# For each logging rule, the first time the rule is reached, the packet
|
|
# will be logged; in fact, since the burst is 5, the first five packets
|
|
# will be logged. After this, it will be 6 seconds (1 minute divided by
|
|
# the rate of 10) before a message will be logged from the rule, regardless
|
|
# of how many packets reach it. Also, every 6 seconds which passes without
|
|
# matching a packet, one of the bursts will be regained; if no packets hit
|
|
# the rule for 30 seconds, the burst will be fully recharged; back where
|
|
# we started.
|
|
#
|
|
|
|
LOGRATE=
|
|
LOGBURST=
|
|
|
|
#
|
|
# LOG ALL NEW
|
|
#
|
|
# This option should only be used when you are trying to analyze a problem.
|
|
# It causes all packets in the Netfilter NEW state to be logged as the
|
|
# first rule in each builtin chain. To use this option, set LOGALLNEW to
|
|
# the log level that you want these packets logged at (e.g.,
|
|
# LOGALLNEW=debug).
|
|
#
|
|
|
|
LOGALLNEW=
|
|
|
|
#
|
|
# BLACKLIST LOG LEVEL
|
|
#
|
|
# Set this variable to the syslogd level that you want blacklist packets logged
|
|
# (beware of DOS attacks resulting from such logging). If not set, no logging
|
|
# of blacklist packets occurs.
|
|
#
|
|
# See the comment at the top of this section for a description of log levels
|
|
#
|
|
|
|
BLACKLIST_LOGLEVEL=
|
|
|
|
#
|
|
# MAC List Log Level
|
|
#
|
|
# Specifies the logging level for connection requests that fail MAC
|
|
# verification. If set to the empty value (MACLIST_LOG_LEVEL="") then
|
|
# such connection requests will not be logged.
|
|
#
|
|
# See the comment at the top of this section for a description of log levels
|
|
#
|
|
|
|
MACLIST_LOG_LEVEL=info
|
|
|
|
#
|
|
# TCP FLAGS Log Level
|
|
#
|
|
# Specifies the logging level for packets that fail TCP Flags
|
|
# verification. If set to the empty value (TCP_FLAGS_LOG_LEVEL="") then
|
|
# such packets will not be logged.
|
|
#
|
|
# See the comment at the top of this section for a description of log levels
|
|
#
|
|
|
|
TCP_FLAGS_LOG_LEVEL=info
|
|
|
|
#
|
|
# RFC1918 Log Level
|
|
#
|
|
# Specifies the logging level for packets that fail RFC 1918
|
|
# verification. If set to the empty value (RFC1918_LOG_LEVEL="") then
|
|
# RFC1918_LOG_LEVEL=info is assumed.
|
|
#
|
|
# See the comment at the top of this section for a description of log levels
|
|
#
|
|
|
|
RFC1918_LOG_LEVEL=info
|
|
|
|
#
|
|
# SMURF Log Level
|
|
#
|
|
# Specifies the logging level for smurf packets dropped by the
|
|
#'nosmurfs' interface option in /etc/shorewall/interfaces and in
|
|
# /etc/shorewall/hosts. If set to the empty value ( SMURF_LOG_LEVEL=""
|
|
# ) then dropped smurfs are not logged.
|
|
#
|
|
# See the comment at the top of this section for a description of log levels
|
|
#
|
|
|
|
SMURF_LOG_LEVEL=info
|
|
|
|
#
|
|
# MARTIAN LOGGING
|
|
#
|
|
# Setting LOG_MARTIANS=Yes will enable kernel logging of all received packets
|
|
# that have impossible source IP addresses. This logging may be enabled
|
|
# on individual interfaces by using the 'logmartians' option in
|
|
# /etc/shorewall/interfaces.
|
|
#
|
|
|
|
LOG_MARTIANS=No
|
|
|
|
###############################################################################
|
|
# L O C A T I O N O F F I L E S A N D D I R E C T O R I E S
|
|
###############################################################################
|
|
#
|
|
# IPTABLES
|
|
#
|
|
# Full path to iptables executable Shorewall uses to build the firewall. If
|
|
# not specified or if specified with an empty value (e.g., IPTABLES="") then
|
|
# the iptables executable located via the PATH setting below is used.
|
|
#
|
|
|
|
IPTABLES=
|
|
|
|
#
|
|
# PATH - Change this if you want to change the order in which Shorewall
|
|
# searches directories for executable files.
|
|
#
|
|
|
|
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
|
|
|
|
#
|
|
# SHELL
|
|
#
|
|
# The firewall script is normally interpreted by /bin/sh. If you wish to change
|
|
# the shell used to interpret that script, specify the shell here.
|
|
#
|
|
|
|
SHOREWALL_SHELL=/bin/sh
|
|
|
|
# SUBSYSTEM LOCK FILE
|
|
#
|
|
# Set this to the name of the lock file expected by your init scripts. For
|
|
# RedHat, this should be /var/lock/subsys/shorewall. If your init scripts don't
|
|
# use lock files, set this to "".
|
|
#
|
|
|
|
SUBSYSLOCK=/var/lock/subsys/shorewall
|
|
|
|
#
|
|
# KERNEL MODULE DIRECTORY
|
|
#
|
|
# If your netfilter kernel modules are in a directory other than
|
|
# /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter then specify that
|
|
# directory in this variable. Example: MODULESDIR=/etc/modules.
|
|
#
|
|
|
|
MODULESDIR=
|
|
|
|
#
|
|
# CONFIGURATION SEARCH PATH
|
|
#
|
|
# This option holds a list of directory names separated by colons
|
|
# (":"). Shorewall will search each directory in turn when looking for a
|
|
# configuration file. When processing a 'try' command or a command
|
|
# containing the "-c" option or that specifies a configuration directory,
|
|
# Shorewall will automatically add the directory specified in the command
|
|
# to the front of this list.
|
|
#
|
|
# If not specified or specified as null ("CONFIG_PATH=""),
|
|
# CONFIG_PATH=/etc/shorewall:/usr/share/shorewall is assumed.
|
|
#
|
|
|
|
CONFIG_PATH=/etc/shorewall:/usr/share/shorewall
|
|
|
|
#
|
|
# RESTORE SCRIPT
|
|
#
|
|
# This option determines the script to be run in the following cases:
|
|
#
|
|
# shorewall -f start
|
|
# shorewall restore
|
|
# shorewall save
|
|
# shorewall forget
|
|
# Failure of shorewall start or shorewall restart
|
|
#
|
|
# The value of the option must be the name of an executable file in the
|
|
# directory /var/lib/shorewall. If this option is not set or if it is
|
|
# set to the empty value (RESTOREFILE="") then RESTOREFILE=restore is
|
|
# assumed.
|
|
#
|
|
|
|
RESTOREFILE=
|
|
|
|
#
|
|
# OLD ZONE FILE FORMAT
|
|
#
|
|
# Previous versions of Shorewall had both a 'zones' file and an 'ipsec' file.
|
|
# Beginning with 2.5.0, those files were combined. For users who haven't
|
|
# converted, we offer this variable that sets the name of the file for ipsec
|
|
# information. This option must take the value "zones" or "ipsec". If the
|
|
# option is not set or is set to the empty value (IPSECFILE="") then "ipsec"
|
|
# is assumed.
|
|
#
|
|
|
|
IPSECFILE=zones
|
|
|
|
###############################################################################
|
|
# F I R E W A L L O P T I O N S
|
|
###############################################################################
|
|
|
|
# NAME OF THE FIREWALL ZONE
|
|
#
|
|
# Name of the firewall zone -- if not set or if set to an empty string, then
|
|
# you must include a definition of the firewall zone in /etc/shorewall/zones.
|
|
#
|
|
# Note: If IPSECFILE=zones above then you must NOT set FW and you must define
|
|
# the firewall zone in /etc/shorewall/zones.
|
|
|
|
FW=
|
|
|
|
#
|
|
# ENABLE IP FORWARDING
|
|
#
|
|
# If you say "On" or "on" here, IPV4 Packet Forwarding is enabled. If you
|
|
# say "Off" or "off", packet forwarding will be disabled. You would only want
|
|
# to disable packet forwarding if you are installing Shorewall on a
|
|
# standalone system or if you want all traffic through the Shorewall system
|
|
# to be handled by proxies.
|
|
#
|
|
# If you set this variable to "Keep" or "keep", Shorewall will neither
|
|
# enable nor disable packet forwarding.
|
|
#
|
|
|
|
IP_FORWARDING=On
|
|
|
|
#
|
|
# AUTOMATICALLY ADD NAT IP ADDRESSES
|
|
#
|
|
# If you say "Yes" or "yes" here, Shorewall will automatically add IP addresses
|
|
# for each NAT external address that you give in /etc/shorewall/nat. If you say
|
|
# "No" or "no", you must add these aliases youself.
|
|
#
|
|
# WARNING: Addresses added by ADD_IP_ALIASES=Yes are deleted and re-added
|
|
# during processing of the "shorewall restart" command. As a consequence,
|
|
# connections using those addresses may be severed.
|
|
#
|
|
|
|
ADD_IP_ALIASES=Yes
|
|
|
|
#
|
|
# AUTOMATICALLY ADD SNAT IP ADDRESSES
|
|
#
|
|
# If you say "Yes" or "yes" here, Shorewall will automatically add IP addresses
|
|
# for each SNAT external address that you give in /etc/shorewall/masq. If you
|
|
# say "No" or "no", you must add these aliases youself. LEAVE THIS SET TO "No"
|
|
# unless you are sure that you need it -- most people don't!!!
|
|
#
|
|
# WARNING: Addresses added by ADD_SNAT_ALIASES=Yes are deleted and re-added
|
|
# during processing of the "shorewall restart" command. As a consequence,
|
|
# connections using those addresses may be severed.
|
|
#
|
|
|
|
ADD_SNAT_ALIASES=No
|
|
|
|
#
|
|
# RETAIN EXISTING ALIASES/IP ADDRESSES
|
|
#
|
|
# Normally, when ADD_IP_ALIASES=Yes and/or ADD_SNAT_ALIASES=Yes then Shorewall
|
|
# will first delete the address then re-add it. This is to ensure that the
|
|
# address is added with the specified label. Unfortunately, this can cause
|
|
# problems if it results in the deletion of the last IP address on an
|
|
# interface because then all routes through the interface are automatically
|
|
# removed.
|
|
#
|
|
# You can cause Shorewall to retain existing addresses by setting
|
|
# RETAIN_ALIASES=Yes.
|
|
#
|
|
|
|
RETAIN_ALIASES=No
|
|
|
|
#
|
|
# ENABLE TRAFFIC SHAPING
|
|
#
|
|
# If you say "Yes" or "yes" here, Shorewall will use a script that you
|
|
# supply to configure traffic shaping. The script must be named 'tcstart'
|
|
# and must be placed in a directory on your CONFIG_PATH.
|
|
#
|
|
# If you say "No" or "no" then traffic shaping is not enabled.
|
|
#
|
|
# If you set TC_ENABLED=Internal or internal or leave the option empty then
|
|
# Shorewall will use its builtin traffic shaper (tc4shorewall written by
|
|
# Arne Bernin).
|
|
#
|
|
# See http://shorewall.net/traffic_shaping.htm for more information.
|
|
|
|
TC_ENABLED=Internal
|
|
|
|
#
|
|
# Clear Traffic Shapping/Control
|
|
#
|
|
# If this option is set to 'No' then Shorewall won't clear the current
|
|
# traffic control rules during [re]start. This setting is intended
|
|
# for use by people that prefer to configure traffic shaping when
|
|
# the network interfaces come up rather than when the firewall
|
|
# is started. If that is what you want to do, set TC_ENABLED=No and
|
|
# CLEAR_TC=No and do not supply an /etc/shorewall/tcstart file. That
|
|
# way, your traffic shaping rules can still use the 'fwmark'
|
|
# classifier based on packet marking defined in /etc/shorewall/tcrules.
|
|
#
|
|
# If omitted, CLEAR_TC=Yes is assumed.
|
|
#
|
|
|
|
CLEAR_TC=Yes
|
|
|
|
#
|
|
# Mark Packets in the forward chain
|
|
#
|
|
# When processing the tcrules file, Shorewall normally marks packets in the
|
|
# PREROUTING chain. To cause Shorewall to use the FORWARD chain instead, set
|
|
# this to "Yes". If not specified or if set to the empty value (e.g.,
|
|
# MARK_IN_FORWARD_CHAIN="") then MARK_IN_FORWARD_CHAIN=No is assumed.
|
|
#
|
|
# Marking packets in the FORWARD chain has the advantage that inbound
|
|
# packets destined for Masqueraded/SNATed local hosts have had their
|
|
# destination address rewritten so they can be marked based on their
|
|
# destination. When packets are marked in the PREROUTING chain, packets
|
|
# destined for Masqueraded/SNATed local hosts still have a destination address
|
|
# corresponding to the firewall's external interface.
|
|
#
|
|
# Note: Older kernels do not support marking packets in the FORWARD chain and
|
|
# setting this variable to Yes may cause startup problems.
|
|
#
|
|
|
|
MARK_IN_FORWARD_CHAIN=No
|
|
|
|
#
|
|
# MSS CLAMPING
|
|
#
|
|
# Set this variable to "Yes" or "yes" if you want the TCP "Clamp MSS to PMTU"
|
|
# option. This option is most commonly required when your internet
|
|
# interface is some variant of PPP (PPTP or PPPoE). Your kernel must
|
|
# have CONFIG_IP_NF_TARGET_TCPMSS set.
|
|
#
|
|
# [From the kernel help:
|
|
#
|
|
# This option adds a `TCPMSS' target, which allows you to alter the
|
|
# MSS value of TCP SYN packets, to control the maximum size for that
|
|
# connection (usually limiting it to your outgoing interface's MTU
|
|
# minus 40).
|
|
#
|
|
# This is used to overcome criminally braindead ISPs or servers which
|
|
# block ICMP Fragmentation Needed packets. The symptoms of this
|
|
# problem are that everything works fine from your Linux
|
|
# firewall/router, but machines behind it can never exchange large
|
|
# packets:
|
|
# 1) Web browsers connect, then hang with no data received.
|
|
# 2) Small mail works fine, but large emails hang.
|
|
# 3) ssh works fine, but scp hangs after initial handshaking.
|
|
# ]
|
|
#
|
|
# If left blank, or set to "No" or "no", the option is not enabled.
|
|
#
|
|
# You may also set this option to a numeric value in which case Shorewall will
|
|
# set up a rule to modify the MSS value in SYN packets to the value that
|
|
# you specify.
|
|
#
|
|
# Example:
|
|
#
|
|
# CLAMPMSS=1400
|
|
#
|
|
|
|
CLAMPMSS=No
|
|
|
|
#
|
|
# ROUTE FILTERING
|
|
#
|
|
# Set this variable to "Yes" or "yes" if you want kernel route filtering on all
|
|
# interfaces started while Shorewall is started (anti-spoofing measure).
|
|
#
|
|
# If this variable is not set or is set to the empty value, "No" is assumed.
|
|
# Regardless of the setting of ROUTE_FILTER, you can still enable route
|
|
# filtering on individual interfaces using the 'routefilter' option in the
|
|
# /etc/shorewall/interfaces file.
|
|
#
|
|
|
|
ROUTE_FILTER=No
|
|
|
|
#
|
|
# DNAT IP ADDRESS DETECTION
|
|
#
|
|
# Normally when Shorewall encounters the following rule:
|
|
#
|
|
# DNAT net loc:192.168.1.3 tcp 80
|
|
#
|
|
# it will forward TCP port 80 connections from the net to 192.168.1.3
|
|
# REGARDLESS OF THE ORIGINAL DESTINATION ADDRESS. This behavior is
|
|
# convenient for two reasons:
|
|
#
|
|
# a) If the the network interface has a dynamic IP address, the
|
|
# firewall configuration will work even when the address
|
|
# changes.
|
|
#
|
|
# b) It saves having to configure the IP address in the rule
|
|
# while still allowing the firewall to be started before the
|
|
# internet interface is brought up.
|
|
#
|
|
# This default behavior can also have a negative effect. If the
|
|
# internet interface has more than one IP address then the above
|
|
# rule will forward connection requests on all of these addresses;
|
|
# that may not be what is desired.
|
|
#
|
|
# By setting DETECT_DNAT_IPADDRS=Yes, rules such as the above will apply
|
|
# only if the original destination address is the primary IP address of
|
|
# one of the interfaces associated with the source zone. Note that this
|
|
# requires all interfaces to the source zone to be up when the firewall
|
|
# is [re]started.
|
|
#
|
|
|
|
DETECT_DNAT_IPADDRS=No
|
|
|
|
#
|
|
# MUTEX TIMEOUT
|
|
#
|
|
# The value of this variable determines the number of seconds that programs
|
|
# will wait for exclusive access to the Shorewall lock file. After the number
|
|
# of seconds corresponding to the value of this variable, programs will assume
|
|
# that the last program to hold the lock died without releasing the lock.
|
|
#
|
|
# If not set or set to the empty value, a value of 60 (60 seconds) is assumed.
|
|
#
|
|
# An appropriate value for this parameter would be twice the length of time
|
|
# that it takes your firewall system to process a "shorewall restart" command.
|
|
#
|
|
|
|
MUTEX_TIMEOUT=60
|
|
|
|
#
|
|
# FOR ADMINS THAT REPEATEDLY SHOOT THEMSELVES IN THE FOOT
|
|
#
|
|
# Normally, when a "shorewall stop" command is issued or an error occurs during
|
|
# the execution of another shorewall command, Shorewall puts the firewall into
|
|
# a state where only traffic to/from the hosts listed in
|
|
# /etc/shorewall/routestopped is accepted.
|
|
#
|
|
# When performing remote administration on a Shorewall firewall, it is
|
|
# therefore recommended that the IP address of the computer being used for
|
|
# administration be added to the firewall's /etc/shorewall/routestopped file.
|
|
#
|
|
# Some administrators have a hard time remembering to do this with the result
|
|
# that they get to drive across town in the middle of the night to restart
|
|
# a remote firewall (or worse, they have to get someone out of bed to drive
|
|
# across town to restart a very remote firewall).
|
|
#
|
|
# For those administrators, we offer ADMINISABSENTMINDED=Yes. With this
|
|
# setting, when the firewall enters the 'stopped' state:
|
|
#
|
|
# All traffic that is part of or related to established connections is still
|
|
# allowed and all OUTPUT traffic is allowed. This is in addition to traffic
|
|
# to and from hosts listed in /etc/shorewall/routestopped.
|
|
#
|
|
# If this variable is not set or it is set to the null value then
|
|
# ADMINISABSENTMINDED=No is assumed.
|
|
#
|
|
|
|
ADMINISABSENTMINDED=Yes
|
|
|
|
#
|
|
# BLACKLIST Behavior
|
|
#
|
|
# Shorewall offers two types of blacklisting:
|
|
#
|
|
# - static blacklisting through the /etc/shorewall/blacklist file
|
|
# together with the 'blacklist' interface option.
|
|
# - dynamic blacklisting using the 'drop', 'reject' and 'allow' commands.
|
|
#
|
|
# The following variable determines whether the blacklist is checked for each
|
|
# packet or for each new connection.
|
|
#
|
|
# BLACKLISTNEWONLY=Yes Only consult blacklists for new connection
|
|
# requests
|
|
#
|
|
# BLACKLISTNEWONLY=No Consult blacklists for all packets.
|
|
#
|
|
# If the BLACKLISTNEWONLY option is not set or is set to the empty value then
|
|
# BLACKLISTNEWONLY=No is assumed.
|
|
#
|
|
|
|
BLACKLISTNEWONLY=Yes
|
|
|
|
#
|
|
# Users with a large blacklist find that "shorwall [re]start" takes a long
|
|
# time and that new connections are disabled during that time. By setting
|
|
# DELAYBLACKLISTLOAD=Yes, you can cause Shorewall to enable new connections
|
|
# before loading the blacklist.
|
|
#
|
|
|
|
DELAYBLACKLISTLOAD=No
|
|
|
|
# MODULE NAME SUFFIX
|
|
#
|
|
# When loading a module named in /etc/shorewall/modules, Shorewall normally
|
|
# looks in the MODULES DIRECTORY (see MODULESDIR above) for files whose names
|
|
# end in ".o", ".ko", ".gz", "o.gz" or "ko.gz" . If your distribution uses a
|
|
# different naming convention then you can specify the suffix (extension) for
|
|
# module names in this variable.
|
|
#
|
|
# To see what suffix is used by your distribution:
|
|
#
|
|
# ls /lib/modules/$(uname -r)/kernel/net/ipv4/netfilter
|
|
#
|
|
# All of the file names listed should have the same suffix (extension). Set
|
|
# MODULE_SUFFIX to that suffix.
|
|
#
|
|
# Examples:
|
|
#
|
|
# If all file names end with ".kzo" then set MODULE_SUFFIX="kzo"
|
|
# If all file names end with ".kz.o" then set MODULE_SUFFIX="kz.o"
|
|
#
|
|
|
|
MODULE_SUFFIX=
|
|
|
|
#
|
|
# DISABLE IPV6
|
|
#
|
|
# Distributions (notably SuSE) are beginning to ship with IPV6
|
|
# enabled. If you are not using IPV6, you are at risk of being
|
|
# exploited by users who do. Setting DISABLE_IPV6=Yes will cause
|
|
# Shorewall to disable IPV6 traffic to/from and through your
|
|
# firewall system. This requires that you have ip6tables installed.
|
|
|
|
DISABLE_IPV6=Yes
|
|
|
|
#
|
|
# BRIDGING
|
|
#
|
|
# If you wish to restrict connections through a bridge
|
|
# (see http://bridge.sf.net), then set BRIDGING=Yes. Your kernel must have
|
|
# the physdev match option enabled; that option is available at the above URL
|
|
# for 2.4 kernels and is included as a standard part of the 2.6 series
|
|
# kernels. If not specified or specified as empty (BRIDGING="") then "No" is
|
|
# assumed.
|
|
#
|
|
|
|
BRIDGING=No
|
|
|
|
#
|
|
# DYNAMIC ZONES
|
|
#
|
|
# If you need to be able to add and delete hosts from zones dynamically then
|
|
# set DYNAMIC_ZONES=Yes. Otherwise, set DYNAMIC_ZONES=No.
|
|
|
|
DYNAMIC_ZONES=No
|
|
|
|
#
|
|
# USE PKTTYPE MATCH
|
|
#
|
|
# Some users have reported problems with the PKTTYPE match extension not being
|
|
# able to match certain broadcast packets. If you set PKTTYPE=No then Shorewall
|
|
# will use IP addresses to detect broadcasts rather than pkttype. If not given
|
|
# or if given as empty (PKTTYPE="") then PKTTYPE=Yes is assumed.
|
|
#
|
|
|
|
PKTTYPE=Yes
|
|
|
|
#
|
|
# RFC 1918 BEHAVIOR
|
|
#
|
|
# Traditionally, the RETURN target in the 'rfc1918' file has caused 'norfc1918'
|
|
# processing to cease for a packet if the packet's source IP address matches
|
|
# the rule. Thus, if you have:
|
|
#
|
|
# SUBNETS TARGET
|
|
# 192.168.1.0/24 RETURN
|
|
#
|
|
# then traffic from 192.168.1.4 to 10.0.3.9 will be accepted even though you
|
|
# also have:
|
|
#
|
|
# SUBNETS TARGET
|
|
# 10.0.0.0/8 logdrop
|
|
#
|
|
# Setting RFC1918_STRICT=Yes will cause such traffic to be logged and dropped
|
|
# since while the packet's source matches the RETURN rule, the packet's
|
|
# destination matches the 'logdrop' rule.
|
|
#
|
|
# If not specified or specified as empty (e.g., RFC1918_STRICT="") then
|
|
# RFC1918_STRICT=No is assumed.
|
|
#
|
|
# WARNING: RFC1918_STRICT=Yes requires that your kernel and iptables support
|
|
# 'conntrack state' match.
|
|
#
|
|
|
|
RFC1918_STRICT=No
|
|
|
|
#
|
|
# MAC List Table
|
|
#
|
|
# Normally, MAC verification occurs in the filter table (INPUT and FORWARD)
|
|
# chains. When forwarding a packet from an interface with MAC verification
|
|
# to a bridge interface, that doesn't work.
|
|
#
|
|
# This problem can be worked around by setting MACLIST_TABLE=mangle which
|
|
# will cause Mac verification to occur out of the PREROUTING chain. Because
|
|
# REJECT isn't available in that environment, you may not specify
|
|
# MACLIST_DISPOSITION=REJECT with MACLIST_TABLE=mangle.
|
|
|
|
MACLIST_TABLE=filter
|
|
|
|
#
|
|
# MACLIST caching
|
|
#
|
|
# If your iptables and kernel support the "Recent Match" (see the output of
|
|
# "shorewall check" near the top), you can cache the results of a 'maclist'
|
|
# file lookup and thus reduce the overhead associated with MAC Verification
|
|
# (/etc/shorewall/maclist).
|
|
#
|
|
# When a new connection arrives from a 'maclist' interface, the packet passes
|
|
# through the list of entries for that interface in /etc/shorewall/maclist. If
|
|
# there is a match then the source IP address is added to the 'Recent' set for
|
|
# that interface. Subsequent connection attempts from that IP address occuring
|
|
# within $MACLIST_TTL seconds will be accepted without having to scan all of
|
|
# the entries. After $MACLIST_TTL from the first accepted connection request,
|
|
# the next connection request from that IP address will be checked against
|
|
# the entire list.
|
|
#
|
|
# If MACLIST_TTL is not specified or is specified as empty (e.g,
|
|
# MACLIST_TTL="" or is specified as zero then 'maclist' lookups will not
|
|
# be cached.
|
|
#
|
|
|
|
MACLIST_TTL=
|
|
|
|
#
|
|
# Save/Restore IPSETS
|
|
#
|
|
# If SAVE_IPSETS=Yes then Shorewall will:
|
|
#
|
|
# Restore the last saved ipset contents during "shorewall [re]start"
|
|
# Save the current ipset contents during "shorewall save"
|
|
#
|
|
# Regardless of the setting of SAVE_IPSETS, if ipset contents were
|
|
# saved during a "shorewall save" then they will be restored during
|
|
# a subsequent "shorewall restore".
|
|
#
|
|
|
|
SAVE_IPSETS=No
|
|
|
|
#
|
|
# Map Old Actions
|
|
#
|
|
# Previously, Shorewall included a large number of standard actions (AllowPing,
|
|
# AllowFTP, ...). These have been replaced with parameterized macros. For
|
|
# compatibility, Shorewall can map the old names into invocations of the new
|
|
# macros if you set MAPOLDACTIONS=Yes. If this option is not set or is set to
|
|
# the empty value (MAPOLDACTIONS="") then MAPOLDACTIONS=Yes is assumed
|
|
#
|
|
|
|
MAPOLDACTIONS=No
|
|
|
|
#
|
|
# Fast ESTABLISHED/RELATED handling
|
|
#
|
|
# Normally, Shorewall accepting ESTABLISHED/RELATED packets until these packets
|
|
# reach the chain in which the original connection was accepted. So for packets
|
|
# going from the 'loc' zone to the 'net' zone, ESTABLISHED/RELATED packets are
|
|
# ACCEPTED in the 'loc2net' chain.
|
|
#
|
|
# If you set FASTACCEPT=Yes, then ESTABLISHED/RELEATED packets are accepted
|
|
# early in the INPUT, FORWARD and OUTPUT chains. If you set
|
|
# FASTACCEPT=Yes then you may not specify ESTABLISHED policies in
|
|
# /etc/shorewall/policy.
|
|
|
|
FASTACCEPT=No
|
|
|
|
###############################################################################
|
|
# P A C K E T D I S P O S I T I O N
|
|
###############################################################################
|
|
#
|
|
# BLACKLIST DISPOSITION
|
|
#
|
|
# Set this variable to the action that you want to perform on packets from
|
|
# Blacklisted systems. Must be DROP or REJECT. If not set or set to empty,
|
|
# DROP is assumed.
|
|
#
|
|
|
|
BLACKLIST_DISPOSITION=DROP
|
|
|
|
#
|
|
# MAC List Disposition
|
|
#
|
|
# This variable determines the disposition of connection requests arriving
|
|
# on interfaces that have the 'maclist' option and that are from a device
|
|
# that is not listed for that interface in /etc/shorewall/maclist. Valid
|
|
# values are ACCEPT, DROP and REJECT. If not specified or specified as
|
|
# empty (MACLIST_DISPOSITION="") then REJECT is assumed
|
|
#
|
|
|
|
MACLIST_DISPOSITION=REJECT
|
|
|
|
#
|
|
# TCP FLAGS Disposition
|
|
#
|
|
# This variable determins the disposition of packets having an invalid
|
|
# combination of TCP flags that are received on interfaces having the
|
|
# 'tcpflags' option specified in /etc/shorewall/interfaces or in
|
|
# /etc/shorewall/hosts. If not specified or specified as empty
|
|
# (TCP_FLAGS_DISPOSITION="") then DROP is assumed.
|
|
#
|
|
|
|
TCP_FLAGS_DISPOSITION=DROP
|
|
|
|
#LAST LINE -- DO NOT REMOVE
|