shorewall_code/docs/IPIP.xml
2007-06-28 20:20:16 +00:00

172 lines
6.0 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article id="IPIP">
<!--$Id$-->
<articleinfo>
<title>GRE and IPIP Tunnels</title>
<authorgroup>
<author>
<firstname>Tom</firstname>
<surname>Eastep</surname>
</author>
</authorgroup>
<pubdate><?dbtimestamp format="Y/m/d"?></pubdate>
<copyright>
<year>2001</year>
<year>2002</year>
<year>2003</year>
<year>2004</year>
<year>2005</year>
<holder>Thomas M. Eastep</holder>
</copyright>
<legalnotice>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation
License</ulink></quote>.</para>
</legalnotice>
</articleinfo>
<warning>
<para>GRE and IPIP Tunnels are insecure when used over the internet; use
them at your own risk</para>
</warning>
<para>GRE and IPIP tunneling with Shorewall can be used to bridge two
masqueraded networks.</para>
<para>The simple scripts described in the <citetitle><ulink
url="http://ds9a.nl/lartc">Linux Advanced Routing and Shaping
HOWTO</ulink></citetitle> work fine with Shorewall. Shorewall also includes
a tunnel script for automating tunnel configuration. If you have installed
the RPM, the tunnel script may be found in the Shorewall documentation
directory (usually /usr/share/doc/shorewall-&lt;version&gt;/).</para>
<section id="Bridged">
<title>Bridging two Masqueraded Networks</title>
<para>Suppose that we have the following situation:</para>
<graphic fileref="images/TwoNets1.png" />
<para>We want systems in the 192.168.1.0/24 subnetwork to be able to
communicate with the systems in the 10.0.0.0/8 network. This is
accomplished through use of the /etc/shorewall/tunnels file, the
/etc/shorewall/policy file and the /etc/shorewall/tunnel script that is
included with Shorewall.</para>
<para>The <quote>tunnel</quote> script is not installed in /etc/shorewall
by default -- If you install using the tarball, the script is included in
the tarball; if you install using the RPM, the file is in your Shorewall
documentation directory (normally
/usr/share/doc/shorewall-&lt;version&gt;).</para>
<para>In the /etc/shorewall/tunnel script, set the
<quote>tunnel_type</quote> parameter to the type of tunnel that you want
to create.</para>
<example id="Tunnel">
<title>/etc/shorewall/tunnel</title>
<programlisting>tunnel_type=gre</programlisting>
</example>
<warning>
<para>If you use the PPTP connection tracking modules from Netfilter
Patch-O-Matic (ip_conntrack_proto_gre ip_conntrack_pptp,
ip_nat_proto_gre and ip_nat_pptp) then you cannot use GRE
tunnels.</para>
</warning>
<para>On each firewall, you will need to declare a zone to represent the
remote subnet. We'll assume that this zone is called <quote>vpn</quote>
and declare it in /etc/shorewall/zones on both systems as follows.</para>
<programlisting>#ZONE TYPE OPTIONS
vpn ipv4</programlisting>
<para>On system A, the 10.0.0.0/8 will comprise the <emphasis
role="bold">vpn</emphasis> zone. In /etc/shorewall/interfaces:</para>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
vpn tosysb 10.255.255.255</programlisting>
<para>In /etc/shorewall/tunnels on system A, we need the following:</para>
<programlisting>#TYPE ZONE GATEWAY GATEWAY ZONE
ipip net 134.28.54.2</programlisting>
<para>This entry in /etc/shorewall/tunnels, opens the firewall so that the
IP encapsulation protocol (4) will be accepted to/from the remote
gateway.</para>
<para>In the tunnel script on system A:</para>
<example id="TunnelA">
<title>tunnel script on system A</title>
<programlisting>tunnel=tosysb
myrealip=206.161.148.9 (for GRE tunnel only)
myip=192.168.1.1
hisip=10.0.0.1
gateway=134.28.54.2
subnet=10.0.0.0/8
</programlisting>
</example>
<para>Similarly, On system B the 192.168.1.0/24 subnet will comprise the
<emphasis role="bold">vpn</emphasis> zone. In
/etc/shorewall/interfaces:</para>
<programlisting>#ZONE INTERFACE BROADCAST
vpn tosysa 192.168.1.255</programlisting>
<para>In /etc/shorewall/tunnels on system B, we have:</para>
<programlisting>#TYPE ZONE GATEWAY GATEWAY ZONE
ipip net 206.191.148.9</programlisting>
<para>And in the tunnel script on system B:</para>
<example id="TunnelB">
<title>tunnel script on system B</title>
<programlisting>tunnel=tosysa
myrealip=134.28.54.2 (for GRE tunnel only)
myip=10.0.0.1
hisip=192.168.1.1
gateway=206.191.148.9
subnet=192.168.1.0/24</programlisting>
</example>
<para>You can rename the modified tunnel scripts if you like; be sure that
they are secured so that root can execute them.</para>
<para>You will need to allow traffic between the <quote>vpn</quote> zone
and the <quote>loc</quote> zone on both systems -- if you simply want to
admit all traffic in both directions, you can use the policy file:</para>
<programlisting>#SOURCE DEST POLICY LOG LEVEL
loc vpn ACCEPT
vpn loc ACCEPT</programlisting>
<para>On both systems, restart Shorewall and run the modified tunnel
script with the <quote>start</quote> argument on each system. The systems
in the two masqueraded subnetworks can now talk to each other</para>
</section>
</article>