holm/shorewall_code
1
0
Fork 0
forked from extern/shorewall_code
Code Pull Requests Activity
86ef3d3e35
shorewall_code/Shorewall/manpages/shorewall-providers.xml
Tom Eastep 07c21b8968 Add 'primary' provider option 
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2015-01-06 09:06:27 -08:00

455 lines
19 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
<refmeta>
<refentrytitle>shorewall-providers</refentrytitle>
<manvolnum>5</manvolnum>
<refmiscinfo>Configuration Files</refmiscinfo>
</refmeta>
<refnamediv>
<refname>providers</refname>
<refpurpose>Shorewall Providers file</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>/etc/shorewall/providers</command>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>This file is used to define additional routing tables. You will want
to define an additional table if:</para>
<itemizedlist>
<listitem>
<para>You have connections to more than one ISP or multiple
connections to the same ISP</para>
</listitem>
<listitem>
<para>You run Squid as a transparent proxy on a host other than the
firewall.</para>
</listitem>
<listitem>
<para>You have other requirements for policy routing.</para>
</listitem>
</itemizedlist>
<para>Each entry in the file defines a single routing table.</para>
<para>If you wish to omit a column entry but want to include an entry in
the next column, use "-" for the omitted entry.</para>
<para>The columns in the file are as follows.</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">NAME</emphasis> -
<emphasis>name</emphasis></term>
<listitem>
<para>The provider <emphasis>name</emphasis>. Must be a valid shell
variable name. The names 'local', 'main', 'default' and 'unspec' are
reserved and may not be used as provider names.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">NUMBER</emphasis> -
<emphasis>number</emphasis></term>
<listitem>
<para>The provider number -- a number between 1 and 15. Each
provider must be assigned a unique value.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">MARK</emphasis> (Optional) -
<emphasis>value</emphasis></term>
<listitem>
<para>A FWMARK <emphasis>value</emphasis> used in your <ulink
url="/manpages/shorewall-mangle.html">shorewall-mangle(5)</ulink>
file to direct packets to this provider.</para>
<para>If HIGH_ROUTE_MARKS=Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>, then
the value must be a multiple of 256 between 256 and 65280 or their
hexadecimal equivalents (0x0100 and 0xff00 with the low-order byte
of the value being zero). Otherwise, the value must be between 1 and
255. Each provider must be assigned a unique mark value. This column
may be omitted if you don't use packet marking to direct connections
to a particular provider.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">DUPLICATE</emphasis> -
<emphasis>routing-table-name</emphasis></term>
<listitem>
<para>The name of an existing table to duplicate to create this
routing table. May be <option>main</option> or the name of a
previously listed provider. You may select only certain entries from
the table to copy by using the COPY column below. This column should
contain a dash ("-') when USE_DEFAULT_RT=Yes in <ulink
url="/manpages/shorewall.conf.html">shorewall.conf(5)</ulink>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">INTERFACE</emphasis> -
<emphasis>interface</emphasis>[:<emphasis>address</emphasis>]</term>
<listitem>
<para>The name of the network interface to the provider. Must be
listed in <ulink
url="/manpages/shorewall-interfaces.html">shorewall-interfaces(5)</ulink>.
In general, that interface should not have the
<option>proxyarp</option> option specified unless
<option>loose</option> is given in the OPTIONS column of this
entry.</para>
<para>Where more than one provider is serviced through a single
interface, the <emphasis>interface</emphasis> must be followed by a
colon and the IP <emphasis>address</emphasis> of the interface that
is supplied by the associated provider.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">GATEWAY</emphasis> - {<emphasis
role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>mac</emphasis>]|<emphasis
role="bold">detect</emphasis>}</term>
<listitem>
<para>The IP address of the provider's gateway router. Beginning
with Shorewall 4.6.2, you may also specify the MAC address of the
gateway when there are multiple providers serviced through the same
interface. When the MAC is not specified, Shorewall will detect the
MAC during firewall start or restart.</para>
<para>You can enter "detect" here and Shorewall will attempt to
detect the gateway automatically.</para>
<para>For PPP devices, you may omit this column.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">OPTIONS</emphasis> (Optional) - [<emphasis
role="bold">-</emphasis>|<emphasis>option</emphasis>[<emphasis
role="bold">,</emphasis><emphasis>option</emphasis>]...]</term>
<listitem>
<para>A comma-separated list selected from the following. The order
of the options is not significant but the list may contain no
embedded white-space.</para>
<variablelist>
<varlistentry>
<term>autosrc</term>
<listitem>
<para>Added in Shorewall 4.5.17. Causes a host route to the
provider's gateway router to be added to the provider's
routing table. This is the default behavior unless overridden
by a following <emphasis role="bold">noautosrc</emphasis>
option.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">track</emphasis></term>
<listitem>
<para>If specified, inbound connections on this interface are
to be tracked so that responses may be routed back out this
same interface.</para>
<para>You want to specify <option>track</option> if internet
hosts will be connecting to local servers through this
provider.</para>
<para>Beginning with Shorewall 4.4.3, <option>track</option>
defaults to the setting of the TRACK_PROVIDERS option in
<ulink
url="/manpages/shorewall.conf.html">shorewall.conf</ulink>
(5). If you set TRACK_PROVIDERS=Yes and want to override that
setting for an individual provider, then specify
<option>notrack</option> (see below).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">balance[=<replaceable>weight</replaceable>]</emphasis></term>
<listitem>
<para>The providers that have <option>balance</option>
specified will get outbound traffic load-balanced among them.
By default, all interfaces with <option>balance</option>
specified will have the same weight (1). You can change the
weight of an interface by specifying
<option>balance=</option><replaceable>weight</replaceable>
where <replaceable>weight</replaceable> is the weight of the
route out of this interface.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">loose</emphasis></term>
<listitem>
<para>Shorewall normally adds a routing rule for each IP
address on an interface which forces traffic whose source is
that IP address to be sent using the routing table for that
interface. Setting <option>loose</option> prevents creation of
such rules on this interface.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>noautosrc</term>
<listitem>
<para>Added in Shorewall 4.5.17. Prevents the addition of a
host route to the provider's gateway router from being added
to the provider's routing table. This option must be used with
caution as it can cause start and restart failures.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">notrack</emphasis></term>
<listitem>
<para>Added in Shorewall 4.4.3. When specified, turns off
<option>track</option>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">optional (deprecated for use with
providers that do not share an interface)</emphasis></term>
<listitem>
<para>If the interface named in the INTERFACE column is not up
and configured with an IPv4 address then ignore this provider.
If not specified, the value of the <option>optional</option>
option for the INTERFACE in <ulink
url="/manpages/shorewall-interfaces.html">shorewall-interfaces(5)</ulink>
is assumed. Use of that option is preferred to this one,
unless an <replaceable>address</replaceable> is provider in
the INTERFACE column.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">primary</emphasis></term>
<listitem>
<para>Added in Shorewall 4.6.6, <emphasis
role="bold">primary</emphasis> is equivalent to <emphasis
role="bold">balance=1</emphasis> and is preferred when the
remaining providers specify <emphasis
role="bold">fallback</emphasis> or <emphasis
role="bold">tproxy</emphasis>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">src=</emphasis><replaceable>source-address</replaceable></term>
<listitem>
<para>Specifies the source address to use when routing to this
provider and none is known (the local client has bound to the
0 address). May not be specified when an
<replaceable>address</replaceable> is given in the INTERFACE
column. If this option is not used, Shorewall substitutes the
primary IP address on the interface named in the INTERFACE
column.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">mtu=</emphasis><replaceable>number</replaceable></term>
<listitem>
<para>Specifies the MTU when forwarding through this provider.
If not given, the MTU of the interface named in the INTERFACE
column is assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis
role="bold">fallback[=<replaceable>weight</replaceable>]</emphasis></term>
<listitem>
<para>Indicates that a default route through the provider
should be added to the default routing table (table 253). If a
<replaceable>weight</replaceable> is given, a balanced route
is added with the weight of this provider equal to the
specified <replaceable>weight</replaceable>. If the option is
given without a <replaceable>weight</replaceable>, an separate
default route is added through the provider's gateway; the
route has a metric equal to the provider's NUMBER.</para>
<para>Prior to Shorewall 4.4.24, the option is ignored with a
warning message if USE_DEFAULT_RT=Yes in
<filename>shorewall.conf</filename>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">tproxy</emphasis></term>
<listitem>
<para>Added in Shorewall 4.5.4. Used for supporting the TPROXY
action in shorewall-mangle(5). See <ulink
url="/Shorewall_Squid_Usage.html">http://www.shorewall.net/Shorewall_Squid_Usage.html</ulink>.
When specified, the MARK, DUPLICATE and GATEWAY columns should
be empty, INTERFACE should be set to 'lo' and
<option>tproxy</option> should be the only OPTION. Only one
<option>tproxy</option> provider is allowed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">hostroute</emphasis></term>
<listitem>
<para>Added in Shorewall 4.5.21. This is the default behavior
that results in a host route to the defined <emphasis
role="bold">GATEWAY</emphasis> being inserted into the main
routing table and into the provider's routing table. <emphasis
role="bold">hostroute</emphasis> is required for older
distributions but <emphasis role="bold">nohostroute</emphasis>
(below) is appropriate for recent distributions. <emphasis
role="bold">hostroute</emphasis> may interfere with Zebra's
ability to add routes on some distributions such as Debian
7.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">nohostroute</emphasis></term>
<listitem>
<para>Added in Shorewall 4.5.21. nohostroute inhibits addition
of a host route to the defined <emphasis
role="bold">GATEWAY</emphasis> being inserted into the main
routing table and into the provider's routing table. <emphasis
role="bold">nohostroute</emphasis> is not appropriate for
older distributions but is appropriate for recent
distributions. <emphasis role="bold">nohostroute</emphasis>
allows Zebra's to correctly add routes on some distributions
such as Debian 7.</para>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">COPY</emphasis> -
[{<option>none</option>|<emphasis>interface</emphasis><emphasis
role="bold">[,</emphasis><emphasis>interface</emphasis>]...}]</term>
<listitem>
<para>A comma-separated list of other interfaces on your firewall.
Wildcards specified using an asterisk ("*") are permitted (e.g.,
tun* ). Usually used only when DUPLICATE is <option>main</option>.
Only copy routes through INTERFACE and through interfaces listed
here. If you only wish to copy routes through INTERFACE, enter
<option>none</option> in this column.</para>
<para>Beginning with Shorewall 4.5.17, blackhole, unreachable and
prohibit routes are no longer copied by default but may be copied by
including <emphasis role="bold">blackhole</emphasis>,<emphasis
role="bold">unreachable</emphasis> and <emphasis
role="bold">prohibit</emphasis> respectively in the COPY
list.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Examples</title>
<variablelist>
<varlistentry>
<term>Example 1:</term>
<listitem>
<para>You run squid in your DMZ on IP address 192.168.2.99. Your DMZ
interface is eth2</para>
<programlisting> #NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS
Squid 1 1 - eth2 192.168.2.99 -</programlisting>
</listitem>
</varlistentry>
<varlistentry>
<term>Example 2:</term>
<listitem>
<para>eth0 connects to ISP 1. The IP address of eth0 is
206.124.146.176 and the ISP's gateway router has IP address
206.124.146.254.</para>
<para>eth1 connects to ISP 2. The IP address of eth1 is
130.252.99.27 and the ISP's gateway router has IP address
130.252.99.254.</para>
<para>eth2 connects to a local network.</para>
<programlisting> #NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS COPY
ISP1 1 1 main eth0 206.124.146.254 track,balance eth2
ISP2 2 2 main eth1 130.252.99.254 track,balance eth2</programlisting>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>FILES</title>
<para>/etc/shorewall/providers</para>
</refsect1>
<refsect1>
<title>See ALSO</title>
<para><ulink
url="/MultiISP.html">http://www.shorewall.net/MultiISP.html</ulink></para>
<para><ulink
url="/configuration_file_basics.htm#Pairs">http://www.shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
<para>shorewall(8), shorewall-accounting(5), shorewall-actions(5),
shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5),
shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
shorewall-policy(5), shorewall-proxyarp(5), shorewall-rtrules(5),
shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5),
shorewall-mangle(5), shorewall-tos(5), shorewall-tunnels(5),
shorewall-zones(5)</para>
</refsect1>
</refentry>
View Git Blame Copy Permalink