shorewall_code/Shorewall/hosts
2003-02-11 01:34:52 +00:00

46 lines
1.5 KiB
INI

#
# Shorewall 2.0 - /etc/shorewall/hosts
#
# WARNING: 90% of Shorewall users don't need to add entries to this
# file and 80% of those who try to add such entries get it
# wrong. Unless you are ABSOLUTELY SURE that you need entries
# in this file, don't touch it!
#
# This file is used to define zones in terms of subnets and/or
# individual IP addresses. Most simple setups don't need to
# (should not) place anything in this file. Note that if you
# assign one or more interfaces to a zone in /etc/shorewall/interfaces,
# the hosts/networks that you define for the zone in the file will be
# IN ADDITION to those interfaces.
#
# ZONE - The name of a zone defined in /etc/shorewall/zones
#
# HOST(S) - The name of an interface followed by a colon (":") and
# either:
#
# a) The IP address of a host
# b) A subnetwork in the form
# <subnet-address>/<mask width>
#
# The interface must be defined in the
# /etc/shorewall/interfaces file.
#
# Examples:
#
# eth1:192.168.1.3
# eth2:192.168.2.0/24
#
# OPTIONS - A comma-separated list of options. Currently-defined
# options are:
#
# maclist - Connection requests from these hosts
# are compared against the contents of
# /etc/shorewall/maclist. If this option
# is specified, the interface must be
# an ethernet NIC and must be up before
# Shorewall is started.
#
#
#ZONE HOST(S) OPTIONS
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS LINE -- DO NOT REMOVE