shorewall_code/Shorewall/nat
2005-07-09 05:55:29 +00:00

48 lines
1.9 KiB
Plaintext
Executable File

##############################################################################
#
# Shorewall 2.4 -- Network Address Translation Table
#
# /etc/shorewall/nat
#
# This file is used to define one-to-one Network Address Translation
# (NAT).
#
# WARNING: If all you want to do is simple port forwarding, do NOT use this
# file. See http://www.shorewall.net/FAQ.htm#faq1. Also, in most
# cases, Proxy ARP is a better solution that one-to-one NAT.
#
# Columns must be separated by white space and are:
#
# EXTERNAL External IP Address - this should NOT be the primary
# IP address of the interface named in the next
# column and must not be a DNS Name.
#
# INTERFACE Interface that you want to EXTERNAL address to appear
# on. If ADD_IP_ALIASES=Yes in shorewall.conf, you may
# follow the interface name with ":" and a digit to
# indicate that you want Shorewall to add the alias
# with this name (e.g., "eth0:0"). That allows you to
# see the alias with ifconfig. THAT IS THE ONLY THING
# THAT THIS NAME IS GOOD FOR -- YOU CANNOT USE IT
# ANYWHERE ELSE IN YOUR SHORWALL CONFIGURATION.
#
# If you want to override ADD_IP_ALIASES=Yes for a
# particular entry, follow the interface name with
# ":" and no digit (e.g., "eth0:").
# INTERNAL Internal Address (must not be a DNS Name).
#
# ALL INTERFACES If Yes or yes, NAT will be effective from all hosts.
# If No or no (or left empty) then NAT will be effective
# only through the interface named in the INTERFACE
# column
#
# LOCAL If Yes or yes, NAT will be effective from the firewall
# system
#
# For additional information, see http://shorewall.net/NAT.htm
##############################################################################
#EXTERNAL INTERFACE INTERNAL ALL LOCAL
# INTERFACES
#
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE