shorewall_code/docs/PPTP.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<article id="PPTP">
  <!--$Id$-->

  <articleinfo>
    <title>PPTP - Unmaintained</title>

    <authorgroup>
      <author>
        <firstname>Tom</firstname>

        <surname>Eastep</surname>
      </author>
    </authorgroup>

    <pubdate><?dbtimestamp format="Y/m/d"?></pubdate>

    <copyright>
      <year>2001</year>

      <year>2002</year>

      <year>2003</year>

      <year>2004</year>

      <year>2005</year>

      <year>2006</year>

      <year>2007</year>

      <holder>Thomas M. Eastep</holder>
    </copyright>

    <legalnotice>
      <para>Permission is granted to copy, distribute and/or modify this
      document under the terms of the GNU Free Documentation License, Version
      1.2 or any later version published by the Free Software Foundation; with
      no Invariant Sections, with no Front-Cover, and with no Back-Cover
      Texts. A copy of the license is included in the section entitled
      <quote><ulink url="GnuCopyright.htm">GNU Free Documentation
      License</ulink></quote>.</para>
    </legalnotice>

    <abstract>
      <para>Shorewall easily supports PPTP in a number of
      configurations.</para>
    </abstract>
  </articleinfo>

  <warning>
    <para>I have not used PPTP in years and as a consequence, this document is
    no longer maintained (any volunteers?).</para>

    <para>As far as I know, the information regarding Shorewall configuration
    is still valid but the configurations shown for for the other components
    may no longer work. For the most part, they show configuration files that
    I used when I worked for <trademark>Compaq</trademark> and used PPTP as my
    work VPN.</para>
  </warning>

  <section id="Prelim">
    <title>Preliminary Reading</title>

    <para>I recommend reading the <ulink url="VPNBasics.html">VPN
    Basics</ulink> article if you plan to implement any type of VPN.</para>
  </section>

  <section id="ServerFW">
    <title>PPTP Server Running on your Firewall</title>

    <section id="Samba">
      <title>Configuring Samba</title>

      <para>You will need a WINS server (Samba configured to run as a WINS
      server is fine). Global section from /etc/samba/smb.conf on my WINS
      server (192.168.1.3) is:</para>

      <programlisting>[global]
     workgroup = TDM-NSTOP
     netbios name = WOOKIE
     server string = GNU/Linux Box
     encrypt passwords = Yes
     log file = /var/log/samba/%m.log
     max log size = 0
     socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
     os level = 65
     domain master = True
     preferred master = True
     dns proxy = No
     wins support = Yes
     printing = lprng

[homes]
     comment = Home Directories
     valid users = %S
     read only = No
     create mask = 0664
     directory mask = 0775

[printers]
     comment = All Printers
     path = /var/spool/samba
     printable = Yes</programlisting>
    </section>

    <section id="ConfigPppd">
      <title>Configuring pppd</title>

      <para>Here is a copy of my /etc/ppp/options.poptop file:</para>

      <programlisting>ipparam PoPToP
lock
mtu 1490
mru 1490
ms-wins 192.168.1.3
ms-dns 206.124.146.177
multilink
proxyarp
auth
+chap
+chapms
+chapms-v2
ipcp-accept-local
ipcp-accept-remote
lcp-echo-failure 30
lcp-echo-interval 5
deflate 0
mppe-128
mppe-stateless
require-mppe
require-mppe-stateless</programlisting>

      <note>
        <itemizedlist>
          <listitem>
            <para>System 192.168.1.3 acts as a WINS server so I have included
            that IP as the <quote>ms-wins</quote> value.</para>
          </listitem>

          <listitem>
            <para>I have pointed the remote clients at my DNS server -- it has
            external address 206.124.146.177.</para>
          </listitem>

          <listitem>
            <para>I am requiring 128-bit stateless compression.</para>
          </listitem>
        </itemizedlist>
      </note>

      <para>Here's my /etc/ppp/chap-secrets:</para>

      <programlisting>Secrets for authentication using CHAP
# client        server    secret    IP addresses
CPQTDM\\TEastep *         &lt;shhhhhh&gt; 192.168.1.7
TEastep         *         &lt;shhhhhh&gt; 192.168.1.7</programlisting>

      <para>I am the only user who connects to the server but I may connect
      either with or without a domain being specified. The system I connect
      from is my laptop so I give it the same IP address when tunneled in at
      it has when I use its wireless LAN card around the house.</para>

      <para>You will also want the following in /etc/modules.conf:</para>

      <programlisting>alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate</programlisting>
    </section>

    <section id="ConfigPptpd">
      <title>Configuring pptpd</title>

      <para>PoPTop (pptpd) is available from <ulink
      url="http://www.poptop.org/">http://www.poptop.org/</ulink>.</para>

      <para>Here is a copy of my /etc/pptpd.conf file:</para>

      <programlisting>option /etc/ppp/options.poptop
speed 115200
localip 192.168.1.254
remoteip 192.168.1.33-38</programlisting>

      <note>
        <itemizedlist>
          <listitem>
            <para>I specify the /etc/ppp/options.poptop file as my ppp options
            file (I have several).</para>
          </listitem>

          <listitem>
            <para>The local IP is the same as my internal interface's
            (192.168.1.254).</para>
          </listitem>

          <listitem>
            <para>I have assigned a remote IP range that overlaps my local
            network. This, together with <quote>proxyarp</quote> in my
            /etc/ppp/options.poptop file make the remote hosts look like they
            are part of the local subnetwork.</para>
          </listitem>
        </itemizedlist>
      </note>

      <para>I use this file to start/stop pptpd -- I have this in
      /etc/init.d/pptpd:</para>

      <programlisting>#!/bin/sh
#
# /etc/rc.d/init.d/pptpd
#
# chkconfig: 5 12 85
# description: control pptp server
#

case "$1" in
start)
    echo 1 &gt; /proc/sys/net/ipv4/ip_forward
    modprobe ppp_async
    modprobe ppp_generic
    modprobe ppp_mppe
    modprobe slhc
    if /usr/local/sbin/pptpd; then
        touch /var/lock/subsys/pptpd
    fi
    ;;
stop)
    killall pptpd
    rm -f /var/lock/subsys/pptpd
    ;;
restart)
    killall pptpd
    if /usr/local/sbin/pptpd; then
        touch /var/lock/subsys/pptpd
    fi
    ;;
status)
    ifconfig
    ;;
*)
    echo "Usage: $0 {start|stop|restart|status}"
    ;;
esac</programlisting>
    </section>

    <section id="ConfigFw">
      <title>Configuring Shorewall</title>

      <section id="Basic">
        <title>Basic Setup</title>

        <para>Here' a basic setup that treats your remote users as if they
        were part of your <emphasis role="bold">loc</emphasis> zone. Note that
        if your primary Internet connection uses ppp0, then be sure that
        <emphasis role="bold">loc</emphasis> follows <emphasis
        role="bold">net</emphasis> in /etc/shorewall/zones.</para>

        <para><filename>/etc/shorewall/tunnels</filename>:</para>

        <programlisting>#TYPE           ZONE             GATEWAY           GATEWAY ZONE
pptpserver      net              0.0.0.0/0</programlisting>

        <para><filename>/etc/shorewall/interfaces</filename>:</para>

        <programlisting>#ZONE          INTERFACE         BROADCAST        OPTIONS
loc            ppp+</programlisting>
      </section>

      <section id="Zones">
        <title>Remote Users in a Separate Zone</title>

        <para>If you want to place your remote users in their own zone so that
        you can control connections between these users and the local network,
        follow this example. Note that if your primary Internet connection
        uses ppp0 then be sure that <emphasis role="bold">vpn</emphasis>
        follows <emphasis role="bold">net</emphasis> in /etc/shorewall/zones
        as shown below.</para>

        <para><filename>/etc/shorewall/tunnels</filename>:</para>

        <programlisting>#TYPE           ZONE             GATEWAY           GATEWAY ZONE
pptpserver      net              0.0.0.0/0</programlisting>

        <para><filename>/etc/shorewall/zones</filename>:</para>

        <programlisting>#ZONE           TYPE
net             ipv4
loc             ipv4
vpn             ipv4</programlisting>

        <para><filename>/etc/shorewall/interfaces</filename>:</para>

        <programlisting>#ZONE          INTERFACE         BROADCAST        OPTIONS
net            eth0              206.124.146.255  norfc1918
loc            eth2              192.168.10.255
vpn            ppp+</programlisting>

        <para>Your policies and rules may now be configured for traffic
        to/from the <emphasis role="bold">vpn</emphasis> zone.</para>
      </section>

      <section id="Hub">
        <title>Multiple Remote Networks</title>

        <para>Often there will be situations where you want multiple
        connections from remote networks with these networks having different
        firewalling requirements.<graphic
        fileref="images/MultiPPTP.png" /></para>

        <para>Here's how you configure this in Shorewall. Note that if your
        primary Internet connection uses ppp0 then be sure that the <emphasis
        role="bold">vpn{1-3}</emphasis> zones follows <emphasis
        role="bold">net</emphasis> in /etc/shorewall/zones as shown
        below.</para>

        <para><filename>/etc/shorewall/tunnels</filename>:</para>

        <programlisting>#TYPE           ZONE             GATEWAY           GATEWAY ZONE
pptpserver      net              0.0.0.0/0</programlisting>

        <para><filename>/etc/shorewall/zones</filename>:</para>

        <programlisting>#ZONE           TYPE
fw              firewall
net             ipv4
loc             ipv4
vpn1            ipv4
vpn2            ipv4
vpn3            ipv4</programlisting>

        <para><filename>/etc/shorewall/interfaces</filename>:</para>

        <programlisting>#ZONE          INTERFACE         BROADCAST        OPTIONS
net            eth0              206.124.146.255  norfc1918
loc            eth2              192.168.10.255
-              ppp+</programlisting>

        <para><filename>/etc/shorewall/hosts</filename>:</para>

        <programlisting>#ZONE          HOST(S)                   OPTIONS
vpn1           ppp+:192.168.1.0/24
vpn2           ppp+:192.168.2.0/24
vpn3           ppp+:192.168.3.0/24</programlisting>

        <para>Your policies and rules can now be configured using separate
        zones (vpn1, vpn2, and vpn3) for the three remote network.</para>
      </section>
    </section>
  </section>

  <section id="ServerBehind">
    <title>PPTP Server Running Behind your Firewall</title>

    <para>If you have a single external IP address, add the following to your
    /etc/shorewall/rules file:</para>

    <para><filename>/etc/shorewall/rules</filename>:</para>

    <programlisting>#ACTION      SOURCE         DEST                  PROTO       DEST PORT(S)
DNAT         net            loc:<emphasis>&lt;server address&gt;</emphasis>  tcp         1723
DNAT         net            loc:<emphasis>&lt;server address&gt;</emphasis>  47</programlisting>

    <para>If you have multiple external IP address and you want to forward a
    single &lt;<emphasis>external address</emphasis>&gt;, add the following to
    your /etc/shorewall/rules file:</para>

    <para><filename>/etc/shorewall/rules</filename>:</para>

    <programlisting>#ACTION      SOURCE         DEST                  PROTO       DEST PORT(S)     SOURCE          ORIGINAL
#                                                                              PORT(S)         DEST
DNAT         net            loc:<emphasis>&lt;server address&gt;</emphasis>  tcp         1723             -               <emphasis>&lt;external address&gt;</emphasis>
DNAT         net            loc:<emphasis>&lt;server address&gt;</emphasis>  47          -                -               <emphasis>&lt;external address&gt;</emphasis></programlisting>

    <para>You will also want to add this entry to your
    <filename>/etc/shorewall/masq</filename> file:</para>

    <programlisting>#INTERFACE             SUBNET             ADDRESS               PROTO
&lt;<emphasis>external interface</emphasis>&gt;   &lt;<emphasis>server address</emphasis>&gt;   &lt;<emphasis>external address</emphasis>&gt;    47</programlisting>

    <important>
      <para>Be sure that the above entry comes <emphasis
      role="bold">before</emphasis> any other entry that might match the
      server's address.</para>
    </important>
  </section>

  <section id="ClientsBehind">
    <title>PPTP Clients Running Behind your Firewall</title>

    <para>Pleas see <ulink url="VPM.htm">this article</ulink>.</para>
  </section>

  <section id="ClientFW">
    <title>PPTP Client Running on your Firewall</title>

    <para>The key elements of this setup are as follows:</para>

    <orderedlist>
      <listitem>
        <para>Define a zone for the remote network accessed via PPTP.</para>
      </listitem>

      <listitem>
        <para>Associate that zone with a ppp interface.</para>
      </listitem>

      <listitem>
        <para>Define rules for PPTP traffic to/from the firewall.</para>
      </listitem>

      <listitem>
        <para>Define rules for traffic two and from the remote zone.</para>
      </listitem>
    </orderedlist>

    <para>Here are examples from one of my old setups:</para>

    <para><filename>/etc/shorewall/zones</filename>:</para>

    <programlisting>#ZONE          TYPE
cpq            ipv4</programlisting>

    <para><filename>/etc/shorewall/interfaces</filename>:</para>

    <programlisting>#ZONE          INTERFACE        BROADCAST          OPTIONS
-              ppp+</programlisting>

    <para>/etc/shorewall/hosts:</para>

    <programlisting>#ZONE          HOST(S)                             OPTIONS
cpq            ppp+:!192.168.1.0/24</programlisting>

    <para><filename>/etc/shorewall/tunnels</filename>:</para>

    <programlisting>#TYPE          ZONE             GATEWAY            GATEWAY ZONE
pptpclient     net              0.0.0.0/0</programlisting>

    <para>I use the combination of interface and hosts file to define the
    <quote>cpq</quote> zone because I also run a PPTP server on my firewall
    (see above). Using this technique allows me to distinguish clients of my
    own PPTP server from arbitrary hosts at Compaq; I assign addresses in
    192.168.1.0/24 to my PPTP clients and Compaq doesn't use that RFC1918
    Class C subnet.</para>

    <para>I use this script in /etc/init.d to control the client. The reason
    that I disable ECN when connecting is that the Compaq tunnel servers don't
    do ECN yet and reject the initial TCP connection request if I enable ECN
    :-(</para>

    <programlisting>#!/bin/sh
#
# /etc/rc.d/init.d/pptp
#
# chkconfig: 5 60 85
# description: PPTP Link Control
#
NAME="Tandem"
ADDRESS=tunnel-tandem.compaq.com
USER='Tandem\tommy'
ECN=0
DEBUG=

start_pptp() {
    echo $ECN &gt; /proc/sys/net/ipv4/tcp_ecn
    if /usr/sbin/pptp $ADDRESS user $USER noauth $DEBUG; then
        touch /var/lock/subsys/pptp
        echo "PPTP Connection to $NAME Started"
    fi
}

stop_pptp() {
    if killall /usr/sbin/pptp 2&gt; /dev/null; then
        echo "Stopped pptp"
    else
        rm -f /var/run/pptp/*
    fi

    # if killall pppd; then
    # echo "Stopped pppd"
    # fi

    rm -f /var/lock/subsys/pptp

    echo 1 &gt; /proc/sys/net/ipv4/tcp_ecn
}


case "$1" in
start)
    echo "Starting PPTP Connection to ${NAME}..."
    start_pptp
    ;;
stop)
    echo "Stopping $NAME PPTP Connection..."
    stop_pptp
    ;;
restart)
    echo "Restarting $NAME PPTP Connection..."
    stop_pptp
    start_pptp
    ;;
status)
    ifconfig
    ;;
*)
    echo "Usage: $0 {start|stop|restart|status}"
    ;;
esac</programlisting>

    <para>Here's my /etc/ppp/options file:</para>

    <programlisting>#
# Identify this connection
#
ipparam Compaq
#
# Lock the port
#
lock
#
# We don't need the tunnel server to authenticate itself
#
noauth

+chap
+chapms
+chapms-v2

multilink
mrru 1614
#
# Turn off transmission protocols we know won't be used
#
nobsdcomp
nodeflate

#
# We want MPPE
#
mppe-128
mppe-stateless

#
# We want a sane mtu/mru
#
mtu 1000
mru 1000

#
# Time this thing out of it goes poof
#
lcp-echo-failure 10
lcp-echo-interval 10</programlisting>

    <para>My /etc/ppp/ip-up.local file sets up the routes that I need to route
    Compaq traffic through the PPTP tunnel:</para>

    <programlisting>#/bin/sh

case $6 in
Compaq)
    route add -net 16.0.0.0 netmask 255.0.0.0 gw $5 $1
    route add -net 130.252.0.0 netmask 255.255.0.0 gw $5 $1
    route add -net 131.124.0.0 netmask 255.255.0.0 gw $5 $1
    ...
    ;;
esac</programlisting>

    <para>Finally, I run the following script every five minutes under crond
    to restart the tunnel if it fails:</para>

    <programlisting>#!/bin/sh
restart_pptp() {
    /sbin/service pptp stop
    sleep 10
    if /sbin/service pptp start; then
        /usr/bin/logger "PPTP Restarted"
    fi
}

if [ -n "`ps ax | grep /usr/sbin/pptp | grep -v grep`" ]; then
    exit 0
fi

echo "Attempting to restart PPTP"

restart_pptp &gt; /dev/null 2&gt;&amp;1 &amp;</programlisting>

    <para><ulink url="ftp://ftp.shorewall.net/pub/shorewall/misc/Vonau">Here's
    a script and corresponding ip-up.local</ulink> from Jerry Vonau
    <email>jvonau@home.com</email> that controls two PPTP connections.</para>
  </section>

  <section id="PPTP_ADSL">
    <title>PPTP Client running on your Firewall with PPTP Server in an ADSL
    Modem</title>

    <para>Some ADSL systems in Europe (most notably in Austria and the
    Netherlands) feature a PPTP server builtinto an ADSL
    <quote>Modem</quote>. In this setup, an Ethernet interface is dedicated to
    supporting the PPTP tunnel between the firewall and the
    <quote>Modem</quote> while the actual Internet access is through PPTP
    (interface ppp0). If you have this type of setup, you need to modify the
    sample configuration that you downloaded as described in this section.
    <emphasis role="bold">These changes are in addition to those described in
    the <ulink url="shorewall_quickstart_guide.htm">QuickStart
    Guides</ulink>.</emphasis></para>

    <para>Lets assume the following:</para>

    <itemizedlist>
      <listitem>
        <para>ADSL Modem connected through eth0</para>
      </listitem>

      <listitem>
        <para>Modem IP address = 192.168.1.1</para>
      </listitem>

      <listitem>
        <para>eth0 IP address = 192.168.1.2</para>
      </listitem>
    </itemizedlist>

    <para>The changes you need to make are as follows:</para>

    <orderedlist>
      <listitem>
        <para>Add this entry to /etc/shorewall/zones:</para>

        <programlisting>#ZONE          TYPE
modem          ipv4</programlisting>

        <para>That entry defines a new zone called <quote>modem</quote> which
        will contain only your ADSL modem.</para>
      </listitem>

      <listitem>
        <para>Add the following entry to /etc/shorewall/interfaces:</para>

        <programlisting>#ZONE          INTERFACE        BROADCAST          OPTIONS
modem          eth0             192.168.1.255      dhcp</programlisting>

        <para>You will of course modify the <quote>net</quote> entry in
        /etc/shorewall/interfaces to specify <quote>ppp0</quote> as the
        interface as described in the QuickStart Guide corresponding to your
        setup.</para>
      </listitem>

      <listitem>
        <para>Add the following to /etc/shorewall/tunnels:</para>

        <programlisting>#TYPE          ZONE             GATEWAY            GATEWAY ZONE
pptpclient     modem            192.168.1.1</programlisting>

        <para>That entry allows a PPTP tunnel to be established between your
        Shorewall system and the PPTP server in the modem.</para>
      </listitem>
    </orderedlist>
  </section>
</article>