shorewall_code/Samples/three-interfaces/routestopped
2005-09-21 16:26:16 +00:00

67 lines
2.2 KiB
Plaintext

#
# Shorewall version 3.0 - Routestopped File
#
# /etc/shorewall/routestopped
#
# This file is used to define the hosts that are accessible when the
# firewall is stopped or when it is in the process of being
# [re]started.
#
# Columns are:
#
# INTERFACE - Interface through which host(s) communicate with
# the firewall
# HOST(S) - (Optional) Comma-separated list of IP/subnet
# addresses. If your kernel and iptables include
# iprange match support, IP address ranges are also
# allowed.
#
# If left empty or supplied as "-",
# 0.0.0.0/0 is assumed.
# OPTIONS - (Optional) A comma-separated list of
# options. The currently-supported options are:
#
# routeback - Set up a rule to ACCEPT traffic from
# these hosts back to themselves.
#
# source - Allow traffic from these hosts to ANY
# destination. Without this option or the 'dest'
# option, only traffic from this host to other
# listed hosts (and the firewall) is allowed. If
# 'source' is specified then 'routeback' is redundent.
#
# dest - Allow traffic to these hosts from ANY
# source. Without this option or the 'source'
# option, only traffic from this host to other
# listed hosts (and the firewall) is allowed. If
# 'dest' is specified then 'routeback' is redundent.
#
# critical - Allow traffic between the firewall and
# these hosts throughout '[re]start', 'stop' and
# 'clear'. Specifying 'critical' on one or more
# entries will cause your firewall to be "totally
# open" for a brief window during each of those
# operations.
#
# NOTE: The 'source' and 'dest' options work best when used
# in conjunction with ADMINISABSENTMINDED=Yes in
# /etc/shorewall/shorewall.conf.
#
# Example:
#
# INTERFACE HOST(S) OPTIONS
# eth2 192.168.1.0/24
# eth0 192.0.2.44
# br0 - routeback
# eth3 - source
#
# See http://shorewall.net/Documentation.htm#Routestopped and
# http://shorewall.net/starting_and_stopping_shorewall.htm for additional
# information.
#
##############################################################################
#INTERFACE HOST(S)
eth1 -
eth2 -
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE