holm/shorewall_code
1
0
Fork 0
forked from extern/shorewall_code
Code Pull Requests Activity
dc0c17f075
shorewall_code/Shorewall-docs/FAQ.htm
teastep 3354d96ebb 1.3.10 Release Changes 
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@319 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2002-11-09 18:06:34 +00:00

857 lines
39 KiB
HTML
Raw Blame History

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Language" content="en-us">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252">
<meta name="GENERATOR" content="Microsoft FrontPage 5.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<title>Shorewall FAQ</title>
<meta name="Microsoft Theme" content="none">
</head>
<body>
<table border="0" cellpadding="0" cellspacing="0"
style="border-collapse: collapse;" width="100%" id="AutoNumber4"
bgcolor="#400169" height="90">
<tbody>
<tr>
<td width="100%">
<h1 align="center"><font color="#ffffff">Shorewall FAQs</font></h1>
</td>
</tr>
</tbody>
</table>
<p align="left"><b>1. </b><a href="#faq1"> I want to <b>forward</b> UDP <b>
port</b> 7777 to my my personal PC with IP address 192.168.1.5. I've
looked everywhere and can't find <b>how to do it</b>.</a></p>
<p align="left"><b>1a. </b><a href="#faq1a">Ok -- I followed those instructions
but it doesn't work.<br>
</a></p>
<p align="left"><b>1b. </b><a href="#faq1b">I'm still having problems with
port forwarding</a></p>
<p align="left"><b>2.</b> <a href="#faq2">I <b>port forward</b> www requests
to www.mydomain.com (IP 130.151.100.69) to system 192.168.1.5 in my
local network. <b>External clients can browse</b> http://www.mydomain.com
but <b>internal clients can't</b>.</a></p>
<p align="left"><b>2a. </b><a href="#faq3">I have a zone "Z" with an RFC1918
subnet and I use <b>static NAT</b> to assign non-RFC1918 addresses
to hosts in Z. Hosts in Z cannot communicate with each other using their
external (non-RFC1918 addresses) so they <b>can't access each other using
their DNS names.</b></a></p>
<p align="left"><b>3. </b><a href="#faq3">I want to use <b>Netmeeting/MSN
Messenger </b>with Shorewall. What do I do?</a></p>
<p align="left"><b>4. </b><a href="#faq4">I just used an online port scanner
to check my firewall and it shows <b>some ports as 'closed' rather
than 'blocked'.</b> Why?</a></p>
<p align="left"><b>4a. </b><a href="#faq4a">I just ran an <b>nmap UDP scan</b>
of my firewall and it showed 100s of ports as open!!!!</a></p>
<p align="left"><b>5. </b><a href="#faq5">I've installed Shorewall and now
I <b> can't ping</b> through the firewall</a></p>
<p align="left"><b>6. </b><a href="#faq6">Where are the <b>log messages</b>
written and how do I <b>change the destination</b>?</a></p>
<p align="left"><b>6a. </b><a href="#faq6a">Are there any <b>log parsers</b>
that work with Shorewall?</a></p>
<p align="left"><b>7. </b><a href="#faq7">When I stop Shorewall <b>using
'shorewall stop', I can't connect to anything</b>. Why doesn't that command
work?</a></p>
<p align="left"><b>8. </b><a href="#faq8">When I try to <b>start Shorewall
on RedHat 7.x</b>, I get messages about insmod failing -- what's wrong?</a></p>
<p align="left"><b>9. </b><a href="FAQ.htm#faq9">Why can't Shorewall <b>detect
my interfaces </b>properly?</a></p>
<p align="left"><b>10. </b><a href="#faq10">What <b>distributions</b> does
it work with?</a></p>
<p align="left"><b>11. </b><a href="#faq18">What <b>features</b> does it
support?</a></p>
<p align="left"><b>12. </b><a href="#faq12">Why isn't there a <b>GUI</b></a></p>
<p align="left"><b>13. </b><a href="#faq13">Why do you call it <b>"Shorewall"?</b></a></p>
<p align="left"><b>14. </b><a href="#faq14">I'm connected via a cable modem
and it has an internel web server that allows me to configure/monitor
it but as expected if I enable <b> rfc1918 blocking</b> for my eth0 interface,
it also blocks the <b>cable modems web server</b></a>.</p>
<p align="left"><b>14a. </b><a href="#faq14a">Even though it assigns public
IP addresses, my ISP's DHCP server has an RFC 1918 address. If I enable
RFC 1918 filtering on my external interface, <b>my DHCP client cannot
renew its lease</b>.</a></p>
<p align="left"><b>15. </b><a href="#faq15"><b>My local systems can't see
out to the net</b></a></p>
<p align="left"><b>16. </b><a href="#faq16">Shorewall is writing <b>log messages
all over my console</b> making it unusable!<br>
</a></p>
<b>17</b>. <a href="#faq17">How do I find out <b>why this
is</b> getting <b>logged?</b></a><br>
<br>
<b>18.</b> <a href="#faq18">Is there any way to use <b>aliased ip addresses</b>
with Shorewall, and maintain separate rulesets for different IPs?</a>
<hr>
<h4 align="left"><a name="faq1"></a>1. I want to forward UDP port 7777 to
my my personal PC with IP address 192.168.1.5. I've looked everywhere
and can't find how to do it.</h4>
<p align="left"><b>Answer: </b>The <a
href="Documentation.htm#PortForward"> first example</a> in the <a
href="Documentation.htm#Rules">rules file documentation</a> shows how to
do port forwarding under Shorewall. The format of a port-forwarding
rule to a local system is as follows:</p>
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber1">
<tbody>
<tr>
<td><u><b>ACTION</b></u></td>
<td><u><b>SOURCE</b></u></td>
<td><u><b>DESTINATION</b></u></td>
<td><u><b>PROTOCOL</b></u></td>
<td><u><b>PORT</b></u></td>
<td><u><b>SOURCE PORT</b></u></td>
<td><u><b>ORIG. DEST.</b></u></td>
</tr>
<tr>
<td>DNAT</td>
<td>net</td>
<td>loc:<i>&lt;local IP address&gt;</i>[:<i>&lt;local port</i>&gt;]</td>
<td><i>&lt;protocol&gt;</i></td>
<td><i>&lt;port #&gt;</i></td>
<td> <br>
</td>
<td> <br>
</td>
</tr>
</tbody>
</table>
</blockquote>
<p align="left">So to forward UDP port 7777 to internal system 192.168.1.5,
the rule is:</p>
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber1">
<tbody>
<tr>
<td><u><b>ACTION</b></u></td>
<td><u><b>SOURCE</b></u></td>
<td><u><b>DESTINATION</b></u></td>
<td><u><b>PROTOCOL</b></u></td>
<td><u><b>PORT</b></u></td>
<td><u><b>SOURCE PORT</b></u></td>
<td><u><b>ORIG. DEST.</b></u></td>
</tr>
<tr>
<td>DNAT</td>
<td>net</td>
<td>loc:192.168.1.5</td>
<td>udp</td>
<td>7777</td>
<td> <br>
</td>
<td> <br>
</td>
</tr>
</tbody>
</table>
</blockquote>
<div align="left">
<pre align="left"><font face="Courier"> DNAT net loc:192.168.1.5 udp 7777</font></pre>
</div>
<p align="left">If you want to forward requests directed to a particular address
( <i>&lt;external IP&gt;</i> ) on your firewall to an internal system:</p>
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber1">
<tbody>
<tr>
<td><u><b>ACTION</b></u></td>
<td><u><b>SOURCE</b></u></td>
<td><u><b>DESTINATION</b></u></td>
<td><u><b>PROTOCOL</b></u></td>
<td><u><b>PORT</b></u></td>
<td><u><b>SOURCE PORT</b></u></td>
<td><u><b>ORIG. DEST.</b></u></td>
</tr>
<tr>
<td>DNAT</td>
<td>net</td>
<td>loc:<i>&lt;local IP address&gt;</i>[:<i>&lt;local port</i>&gt;]</td>
<td><i>&lt;protocol&gt;</i></td>
<td><i>&lt;port #&gt;</i></td>
<td>-</td>
<td><i>&lt;external IP&gt;</i></td>
</tr>
</tbody>
</table>
</blockquote>
<h4 align="left"><a name="faq1a"></a>1a. Ok -- I followed those instructions
but it doesn't work</h4>
<p align="left"><b>Answer: </b>That is usually the result of one of two things:</p>
<ul>
<li>You are trying to test from inside your firewall (no, that
won't work -- see <a href="#faq2">FAQ #2</a>).</li>
<li>You have a more basic problem with your local system such
as an incorrect default gateway configured (it should be set to the IP
address of your firewall's internal interface).</li>
</ul>
<h4 align="left"><a name="faq1b"></a>1b. I'm still having problems with port
forwarding</h4>
<b>Answer: </b>To further diagnose this problem:<br>
<ul>
<li>As root, type "iptables -t nat -Z". This clears the NetFilter counters
in the nat table.</li>
<li>Try to connect to the redirected port from an external host.</li>
<li>As root type "shorewall show nat"</li>
<li>Locate the appropriate DNAT rule. It will be in a chain called <i>zone</i>_dnat
where <i>zone</i> is the zone that includes the server ('loc' in the above
examples).</li>
<li>Is the packet count in the first column non-zero? If so, the connection
request is reaching the firewall and is being redirected to the server. In
this case, the problem is usually a missing or incorrect default gateway setting
on the server (the server's default gateway should be the IP address of the
firewall's interface to the server).</li>
<li>If the packet count is zero:</li>
<ul>
<li>the connection request is not reaching your server (possibly it
is being blocked by your ISP); or</li>
<li>you are trying to connect to a secondary IP address on your firewall
and your rule is only redirecting the primary IP address (You need to specify
the secondary IP address in the "ORIG. DEST." column in your DNAT rule); or</li>
<li>your DNAT rule doesn't match the connection request in some other
way. In that case, you may have to use a packet sniffer such as tcpdump or
ethereal to further diagnose the problem.<br>
</li>
</ul>
</ul>
<h4 align="left"><a name="faq2"></a>2. I port forward www requests to www.mydomain.com
(IP 130.151.100.69) to system 192.168.1.5 in my local network. External
clients can browse http://www.mydomain.com but internal clients can't.</h4>
<p align="left"><b>Answer: </b>I have two objections to this setup.</p>
<ul>
<li>Having an internet-accessible server in your local network
is like raising foxes in the corner of your hen house. If the server
is compromised, there's nothing between that server and your other
internal systems. For the cost of another NIC and a cross-over cable,
you can put your server in a DMZ such that it is isolated from your
local systems - assuming that the Server can be located near the Firewall,
of course :-)</li>
<li>The accessibility problem is best solved using <a
href="shorewall_setup_guide.htm#DNS">Bind Version 9 "views"</a> (or
using a separate DNS server for local clients) such that www.mydomain.com
resolves to 130.141.100.69 externally and 192.168.1.5 internally. That's
what I do here at shorewall.net for my local systems that use static
NAT.</li>
</ul>
<p align="left">If you insist on an IP solution to the accessibility problem
rather than a DNS solution, then assuming that your external interface
is eth0 and your internal interface is eth1 and that eth1 has IP address
192.168.1.254 with subnet 192.168.1.0/24, do the following:</p>
<p align="left">a) In /etc/shorewall/interfaces, specify "multi" as an option
for eth1 (No longer required as of Shorewall version 1.3.9).</p>
<div align="left">
<p align="left">b) In /etc/shorewall/rules, add:</p>
</div>
<div align="left">
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber1">
<tbody>
<tr>
<td><u><b>ACTION</b></u></td>
<td><u><b>SOURCE</b></u></td>
<td><u><b>DESTINATION</b></u></td>
<td><u><b>PROTOCOL</b></u></td>
<td><u><b>PORT</b></u></td>
<td><u><b>SOURCE PORT</b></u></td>
<td><u><b>ORIG. DEST.</b></u></td>
</tr>
<tr>
<td>DNAT</td>
<td>loc:192.168.1.0/24</td>
<td>loc:192.168.1.5</td>
<td>tcp</td>
<td>www</td>
<td>-</td>
<td>130.151.100.69:192.168.1.254</td>
</tr>
</tbody>
</table>
</blockquote>
</div>
<div align="left">
<pre align="left"> <font face="Courier">DNAT loc:192.168.1.0/24 loc:192.168.1.5 tcp www - 130.151.100.69:192.168.1.254</font></pre>
</div>
<div align="left">
<p align="left">That rule only works of course if you have a static external
IP address. If you have a dynamic IP address and are running Shorewall
1.3.4 or later then include this in /etc/shorewall/params:</p>
</div>
<div align="left">
<pre> ETH0_IP=`find_interface_address eth0`</pre>
</div>
<div align="left">
<p align="left">and make your DNAT rule:</p>
</div>
<div align="left">
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber1">
<tbody>
<tr>
<td><u><b>ACTION</b></u></td>
<td><u><b>SOURCE</b></u></td>
<td><u><b>DESTINATION</b></u></td>
<td><u><b>PROTOCOL</b></u></td>
<td><u><b>PORT</b></u></td>
<td><u><b>SOURCE PORT</b></u></td>
<td><u><b>ORIG. DEST.</b></u></td>
</tr>
<tr>
<td>DNAT</td>
<td>loc:192.168.1.0/24</td>
<td>loc:192.168.1.5</td>
<td>tcp</td>
<td>www</td>
<td>-</td>
<td>$ETH0_IP:192.168.1.254</td>
</tr>
</tbody>
</table>
</blockquote>
</div>
<div align="left">
<p align="left">Using this technique, you will want to configure your DHCP/PPPoE
client to automatically restart Shorewall each time that you get a
new IP address.</p>
</div>
<h4 align="left"><a name="faq2a"></a>2a. I have a zone "Z" with an RFC1918
subnet and I use static NAT to assign non-RFC1918 addresses to hosts
in Z. Hosts in Z cannot communicate with each other using their external
(non-RFC1918 addresses) so they can't access each other using their DNS
names.</h4>
<p align="left"><b>Answer: </b>This is another problem that is best solved
using Bind Version 9 "views". It allows both external and internal clients
to access a NATed host using the host's DNS name.</p>
<p align="left">Another good way to approach this problem is to switch from
static NAT to Proxy ARP. That way, the hosts in Z have non-RFC1918 addresses
and can be accessed externally and internally using the same address.
</p>
<p align="left">If you don't like those solutions and prefer routing all
Z-&gt;Z traffic through your firewall then:</p>
<p align="left">a) Specify "multi" on the entry for Z's interface in /etc/shorewall/interfaces
(If you are running a Shorewall version earlier than 1.3.9).<br>
b) Set the Z-&gt;Z policy to ACCEPT.<br>
c) Masquerade Z to itself.<br>
<br>
Example:</p>
<p align="left">Zone: dmz<br>
Interface: eth2<br>
Subnet: 192.168.2.0/24</p>
<p align="left">In /etc/shorewall/interfaces:</p>
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber2">
<tbody>
<tr>
<td><u><b>ZONE</b></u></td>
<td><u><b>INTERFACE</b></u></td>
<td><u><b>BROADCAST</b></u></td>
<td><u><b>OPTIONS</b></u></td>
</tr>
<tr>
<td>dmz</td>
<td>eth2</td>
<td>192.168.2.255</td>
<td>multi</td>
</tr>
</tbody>
</table>
</blockquote>
<p align="left">In /etc/shorewall/policy:</p>
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber3">
<tbody>
<tr>
<td><u><b>SOURCE </b></u></td>
<td><u><b>DESTINATION</b></u></td>
<td><u><b>POLICY</b></u></td>
<td><u><b>LIMIT:BURST</b></u></td>
</tr>
<tr>
<td>dmz</td>
<td>dmz</td>
<td>ACCEPT</td>
<td> <br>
</td>
</tr>
</tbody>
</table>
</blockquote>
<div align="left">
<pre align="left"> dmz dmz ACCEPT</pre>
</div>
<p align="left">In /etc/shorewall/masq:</p>
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber3" width="369">
<tbody>
<tr>
<td width="93"><u><b>INTERFACE </b></u></td>
<td width="31"><u><b>SUBNET</b></u></td>
<td width="120"><u><b>ADDRESS</b></u></td>
</tr>
<tr>
<td width="93">eth2</td>
<td width="31">192.168.2.0/24</td>
<td width="120"> <br>
</td>
</tr>
</tbody>
</table>
</blockquote>
<h4 align="left"><a name="faq3"></a>3. I want to use Netmeeting/MSN Messenger
with Shorewall. What do I do?</h4>
<p align="left"><b>Answer: </b>There is an <a
href="http://www.kfki.hu/%7Ekadlec/sw/netfilter/newnat-suite/"> H.323 connection
tracking/NAT module</a> that may help. Also check the Netfilter mailing
list archives at <a href="http://netfilter.samba.org">http://netfilter.samba.org</a>.
</p>
<h4 align="left"><a name="faq4"></a>4. I just used an online port scanner
to check my firewall and it shows some ports as 'closed' rather than
'blocked'. Why?</h4>
<p align="left"><b>Answer: </b>The common.def included with version 1.3.x
always rejects connection requests on TCP port 113 rather than dropping
them. This is necessary to prevent outgoing connection problems to
services that use the 'Auth' mechanism for identifying requesting
users. Shorewall also rejects TCP ports 135, 137 and 139 as well as
UDP ports 137-139. These are ports that are used by Windows (Windows
<u>can</u> be configured to use the DCE cell locator on port 135).
Rejecting these connection requests rather than dropping them cuts
down slightly on the amount of Windows chatter on LAN segments connected
to the Firewall. </p>
<p align="left">If you are seeing port 80 being 'closed', that's probably
your ISP preventing you from running a web server in violation of
your Service Agreement.</p>
<h4 align="left"><a name="faq4a"></a>4a. I just ran an nmap UDP scan of my
firewall and it showed 100s of ports as open!!!!</h4>
<p align="left"><b>Answer: </b>Take a deep breath and read the nmap man page
section about UDP scans. If nmap gets <b>nothing</b> back from your
firewall then it reports the port as open. If you want to see which
UDP ports are really open, temporarily change your net-&gt;all policy
to REJECT, restart Shorewall and do the nmap UDP scan again.</p>
<h4 align="left"><a name="faq5"></a>5. I've installed Shorewall and now I
can't ping through the firewall</h4>
<p align="left"><b>Answer: </b>If you want your firewall to be totally open
for "ping": </p>
<p align="left">a) Do NOT specify 'noping' on any interface in /etc/shorewall/interfaces.<br>
b) Copy /etc/shorewall/icmp.def to /etc/shorewall/icmpdef<br>
c) Add the following to /etc/shorewall/icmpdef: </p>
<blockquote>
<p align="left">run_iptables -A icmpdef -p ICMP --icmp-type echo-request
-j ACCEPT </p>
</blockquote>
<h4 align="left"><a name="faq6"></a>6. Where are the log messages written
and how do I change the destination?</h4>
<p align="left"><b>Answer: </b>NetFilter uses the kernel's equivalent of
syslog (see "man syslog") to log messages. It always uses the LOG_KERN (kern)
facility (see "man openlog") and you get to choose the log level (again,
see "man syslog") in your <a href="Documentation.htm#Policy">policies</a>
and <a href="Documentation.htm#Rules">rules</a>. The destination for messaged
logged by syslog is controlled by /etc/syslog.conf (see "man syslog.conf").
When you have changed /etc/syslog.conf, be sure to restart syslogd (on
a RedHat system, "service syslog restart"). </p>
<p align="left">By default, older versions of Shorewall ratelimited log messages
through <a href="Documentation.htm#Conf">settings</a> in /etc/shorewall/shorewall.conf
-- If you want to log all messages, set: </p>
<div align="left">
<pre align="left"> LOGLIMIT=""<br> LOGBURST=""</pre>
</div>
<h4 align="left"><a name="faq6a"></a>6a. Are there any log parsers that work
with Shorewall?</h4>
<p align="left"><b>Answer: </b>Here are several links that may be helpful:
</p>
<blockquote>
<p align="left"><a
href="http://www.shorewall.net/pub/shorewall/parsefw/"> http://www.shorewall.net/pub/shorewall/parsefw/</a><br>
<a href="http://www.fireparse.com">http://www.fireparse.com</a><br>
<a href="http://cert.uni-stuttgart.de/projects/fwlogwatch">http://cert.uni-stuttgart.de/projects/fwlogwatch</a><a
href="http://www.logwatch.org"><br>
http://www.logwatch.org</a><br>
</p>
</blockquote>
<h4 align="left"><a name="faq7"></a>7. When I stop Shorewall using 'shorewall
stop', I can't connect to anything. Why doesn't that command work?</h4>
<p align="left">The 'stop' command is intended to place your firewall into
a safe state whereby only those interfaces/hosts having the 'routestopped'
option in /etc/shorewall/interfaces and /etc/shorewall/hosts are activated.
If you want to totally open up your firewall, you must use the 'shorewall
clear' command. </p>
<h4 align="left"><a name="faq8"></a>8. When I try to start Shorewall on RedHat
7.x, I get messages about insmod failing -- what's wrong?</h4>
<p align="left"><b>Answer: </b>The output you will see looks something like
this:</p>
<pre> /lib/modules/2.4.17/kernel/net/ipv4/netfilter/ip_tables.o: init_module: Device or resource busy<br> Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters<br> /lib/modules/2.4.17/kernel/net/ipv4/netfilter/ip_tables.o: insmod<br> /lib/modules/2.4.17/kernel/net/ipv4/netfilter/ip_tables.o failed<br> /lib/modules/2.4.17/kernel/net/ipv4/netfilter/ip_tables.o: insmod ip_tables failed<br> iptables v1.2.3: can't initialize iptables table `nat': iptables who? (do you need to insmod?)<br> Perhaps iptables or your kernel needs to be upgraded.</pre>
<p align="left">This is usually cured by the following sequence of commands:
</p>
<div align="left">
<pre align="left"> service ipchains stop<br> chkconfig --delete ipchains<br> rmmod ipchains</pre>
</div>
<div align="left">
<p align="left">Also, be sure to check the <a href="errata.htm">errata</a>
for problems concerning the version of iptables (v1.2.3) shipped with
RH7.2.</p>
</div>
<h4 align="left"> </h4>
<h4 align="left"><a name="faq9"></a>9. Why can't Shorewall detect my interfaces
properly?</h4>
<p align="left">I just installed Shorewall and when I issue the start command,
I see the following:</p>
<div align="left">
<pre> Processing /etc/shorewall/shorewall.conf ...<br> Processing /etc/shorewall/params ...<br> Starting Shorewall...<br> Loading Modules...<br> Initializing...<br> Determining Zones...<br> Zones: net loc<br> Validating interfaces file...<br> Validating hosts file...<br> Determining Hosts in Zones...<br><b> Net Zone: eth0:0.0.0.0/0<br> Local Zone: eth1:0.0.0.0/0<br></b> Deleting user chains...<br> Creating input Chains...<br> ...</pre>
</div>
<div align="left">
<p align="left">Why can't Shorewall detect my interfaces properly?</p>
</div>
<div align="left">
<p align="left"><b>Answer: </b>The above output is perfectly normal. The
Net zone is defined as all hosts that are connected through eth0 and the
local zone is defined as all hosts connected through eth1</p>
</div>
<h4 align="left"><a name="faq10"></a>10. What Distributions does it work
with?</h4>
<p align="left">Shorewall works with any GNU/Linux distribution that includes
the <a href="shorewall_prerequisites.htm">proper prerequisites</a>.</p>
<h4 align="left">11. What Features does it have?</h4>
<p align="left"><b>Answer: </b>See the <a href="shorewall_features.htm">Shorewall
Feature List</a>.</p>
<h4 align="left"><a name="faq12"></a>12. Why isn't there a GUI?</h4>
<p align="left"><b>Answer: </b>Every time I've started to work on one, I
find myself doing other things. I guess I just don't care enough if
Shorewall has a GUI to invest the effort to create one myself. There
are several Shorewall GUI projects underway however and I will publish
links to them when the authors feel that they are ready. </p>
<h4 align="left"> <a name="faq13"></a>13. Why do you call it "Shorewall"?</h4>
<p align="left"><b>Answer: </b>Shorewall is a concatenation of "<u>Shore</u>line"
(<a href="http://www.cityofshoreline.com">the city where I live</a>)
and "Fire<u>wall</u>".</p>
<h4 align="left"> <a name="faq14"></a>14. I'm connected via a cable modem
and it has an internal web server that allows me to configure/monitor
it but as expected if I enable rfc1918 blocking for my eth0 interface
(the internet one), it also blocks the cable modems web server.</h4>
<p align="left">Is there any way it can add a rule before the rfc1918 blocking
that will let all traffic to and from the 192.168.100.1 address of
the modem in/out but still block all other rfc1918 addresses.</p>
<p align="left"><b>Answer: </b>If you are running a version of Shorewall
earlier than 1.3.1, create /etc/shorewall/start and in it, place the
following:</p>
<div align="left">
<pre> run_iptables -I rfc1918 -s 192.168.100.1 -j ACCEPT</pre>
</div>
<div align="left">
<p align="left">If you are running version 1.3.1 or later, simply add the
following to<a href="Documentation.htm#rfc1918"> /etc/shorewall/rfc1918</a>:</p>
</div>
<div align="left">
<blockquote>
<table border="1" cellpadding="2" style="border-collapse: collapse;"
id="AutoNumber3">
<tbody>
<tr>
<td><u><b>SUBNET </b></u></td>
<td><u><b>TARGET</b></u></td>
</tr>
<tr>
<td>192.168.100.1</td>
<td>RETURN</td>
</tr>
</tbody>
</table>
</blockquote>
</div>
<div align="left">
<p align="left">Be sure that you add the entry ABOVE the entry for 192.168.0.0/16.<br>
</p>
<p align="left">Note: If you add a second IP address to your external firewall
interface to correspond to the modem address, you must also make an entry
in /etc/shorewall/rfc1918 for that address. For example, if you configure
the address 192.168.100.2 on your firewall, then you would add two entries
to /etc/shorewall/rfc1918: <br>
</p>
<blockquote>
<table cellpadding="2" border="1" style="border-collapse: collapse;">
<tbody>
<tr>
<td valign="top"><u><b>SUBNET</b></u><br>
</td>
<td valign="top"><u><b>TARGET</b></u><br>
</td>
</tr>
<tr>
<td valign="top">192.168.100.1<br>
</td>
<td valign="top">RETURN<br>
</td>
</tr>
<tr>
<td valign="top">192.168.100.2<br>
</td>
<td valign="top">RETURN<br>
</td>
</tr>
</tbody>
</table>
</blockquote>
</div>
<div align="left">
<h4 align="left"><a name="faq14a"></a>14a. Even though it assigns public
IP addresses, my ISP's DHCP server has an RFC 1918 address. If I enable
RFC 1918 filtering on my external interface, my DHCP client cannot renew
its lease.</h4>
</div>
<div align="left">
<p align="left">The solution is the same as FAQ 14 above. Simply substitute
the IP address of your ISPs DHCP server.</p>
</div>
<h4 align="left"><a name="faq15"></a>15. My local systems can't see out to
the net</h4>
<p align="left"><b>Answer: </b>Every time I read "systems can't see out to
the net", I wonder where the poster bought computers with eyes and
what those computers will "see" when things are working properly. That
aside, the most common causes of this problem are:</p>
<ol>
<li>
<p align="left">The default gateway on each local system isn't set to
the IP address of the local firewall interface.</p>
</li>
<li>
<p align="left">The entry for the local network in the /etc/shorewall/masq
file is wrong or missing.</p>
</li>
<li>
<p align="left">The DNS settings on the local systems are wrong or the
user is running a DNS server on the firewall and hasn't enabled UDP
and TCP port 53 from the firewall to the internet.</p>
</li>
</ol>
<h4 align="left"><a name="faq16"></a>16. Shorewall is writing log messages
all over my console making it unusable!</h4>
<p align="left"><b>Answer: </b>"man dmesg" -- add a suitable 'dmesg' command
to your startup scripts or place it in /etc/shorewall/start. Under
RedHat, the max log level that is sent to the console is specified
in /etc/sysconfig/init in the LOGLEVEL variable.<br>
</p>
<h4><a name="faq17"></a>17. How do I find out why this is getting logged?</h4>
<b>Answer: </b>Logging occurs out of a number of chains (as indicated
in the log message) in Shorewall:<br>
<ol>
<li><b>man1918 - </b>The destination address is listed in /etc/shorewall/rfc1918
with a <b>logdrop </b>target -- see <a
href="Documentation.htm#rfc1918">/etc/shorewall/rfc1918.</a></li>
<li><b>rfc1918</b> - The source address is listed in /etc/shorewall/rfc1918
with a <b>logdrop </b>target<EFBFBD>-- see <a
href="Documentation.htm#rfc1918">/etc/shorewall/rfc1918.</a></li>
<li><b>all2&lt;zone&gt;</b>, <b>&lt;zone&gt;2all</b> or <b>all2all
</b>- You have a<a href="Documentation.htm#Policy"> policy</a> that specifies
a log level and this packet is being logged under that policy. If you intend
to ACCEPT this traffic then you need a <a
href="Documentation.htm#Rules">rule</a> to that effect.<br>
</li>
<li><b>&lt;zone1&gt;2&lt;zone2&gt; </b>- Either you have a<a
href="Documentation.htm#Policy"> policy</a> for <b>&lt;zone1&gt; </b>to
<b>&lt;zone2&gt;</b> that specifies a log level and this packet is being
logged under that policy or this packet matches a <a
href="Documentation.htm#Rules">rule</a> that include a log level.</li>
<li><b>logpkt</b> - The packet is being logged under the <b>logunclean</b>
<a href="Documentation.htm#Interfaces">interface option</a>.</li>
<li><b>badpkt </b>- The packet is being logged under the <b>dropunclean</b>
<a href="Documentation.htm#Interfaces">interface option</a> as specified
in the <b>LOGUNCLEAN </b>setting in <a href="Documentation.htm#Conf">/etc/shorewall/shorewall.conf</a>.</li>
<li><b>blacklst</b> - The packet is being logged because the source
IP is blacklisted in the<a href="Documentation.htm#Blacklist"> /etc/shorewall/blacklist
</a>file.</li>
<li><b>newnotsyn </b>- The packet is being logged because it is a
TCP packet that is not part of any current connection yet it is not a syn
packet. Options affecting the logging of such packets include <b>NEWNOTSYN
</b>and <b>LOGNEWNOTSYN </b>in <a
href="Documentation.htm#Conf">/etc/shorewall/shorewall.conf.</a></li>
<li><b>INPUT</b> or <b>FORWARD</b> - The packet has a source IP address
that isn't in any of your defined zones ("shorewall check" and look at the
printed zone definitions) or the chain is FORWARD and the destination IP
isn't in any of your defined zones.</li>
</ol>
<h4><a name="faq18"></a>18. Is there any way to use <b>aliased ip addresses</b>
with Shorewall, and maintain separate rulesets for different IPs?</h4>
<b>Answer: </b>Yes. You simply use the IP address in your rules (or if
you use NAT, use the local IP address in your rules). <b>Note:</b> The ":n"
notation (e.g., eth0:0) is deprecated and will disappear eventually. Neither
iproute (ip and tc) nor iptables supports that notation so neither does
Shorewall. <br>
<br>
<b>Example 1:</b><br>
<br>
/etc/shorewall/rules
<pre wrap=""><span class="moz-txt-citetags"></span> # Accept AUTH but only on address 192.0.2.125<br><span
class="moz-txt-citetags"></span><br><span class="moz-txt-citetags"></span> ACCEPT net fw:192.0.2.125 tcp auth<br><span
class="moz-txt-citetags"></span></pre>
<span class="moz-txt-citetags"></span><b>Example 2 (NAT):</b><br>
<br>
<span class="moz-txt-citetags"></span>/etc/shorewall/nat<br>
<pre wrap=""><span class="moz-txt-citetags"></span><span
class="moz-txt-citetags"></span> 192.0.2.126 eth0 10.1.1.126</pre>
/etc/shorewall/rules
<pre wrap=""><span class="moz-txt-citetags"></span> # Accept HTTP on 192.0.2.126 (a.k.a. 10.1.1.126)<br><span
class="moz-txt-citetags"></span><br> <span class="moz-txt-citetags"></span>ACCEPT net loc:10.1.1.126 tcp www<span
class="moz-txt-citetags"></span><span class="moz-txt-citetags"></span></pre>
<div align="left"> </div>
<p align="left"><font size="2">Last updated 11/09/2002 - <a
href="support.htm">Tom Eastep</a></font></p>
<p><font face="Trebuchet MS"><a href="copyright.htm"><font size="2">Copyright</font>
<20> <font size="2">2001, 2002 Thomas M. Eastep.</font></a></font><br>
<br>
</p>
<br>
</body>
</html>
View Git Blame Copy Permalink