shorewall_code/Shorewall-docs2/myfiles.xml
2005-10-13 23:37:22 +00:00

878 lines
34 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article>
<!--$Id$-->
<articleinfo>
<title>About My Network</title>
<authorgroup>
<author>
<firstname>Tom</firstname>
<surname>Eastep</surname>
</author>
</authorgroup>
<pubdate>2005-10-13</pubdate>
<copyright>
<year>2001-2005</year>
<holder>Thomas M. Eastep</holder>
</copyright>
<legalnotice>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation
License</ulink></quote>.</para>
</legalnotice>
</articleinfo>
<section>
<title>My Current Network</title>
<caution>
<para>I use a combination of One-to-one NAT and Proxy ARP, neither of
which are relevant to a simple configuration with a single public IP
address. If you have just a single public IP address, most of what you
see here won't apply to your setup so beware of copying parts of this
configuration and expecting them to work for you. What you copy may or
may not work in your environment.</para>
</caution>
<caution>
<para>The configuration shown here corresponds to Shorewall version
3.0.0. My configuration uses features not available in earlier Shorewall
releases.</para>
</caution>
<para>I have DSL service and have 5 static IP addresses
(206.124.146.176-180). My DSL <quote>modem</quote> (Westell 2200) is
connected to eth2 and has IP address 192.168.1.1 (factory default). The
modem is configured in <quote>bridge</quote> mode so PPPoE is not
involved. I have a local network connected to eth3 (subnet
192.168.1.0/24), a wireless network (192.168.3.0/24) connected to eth0,
and a DMZ connected to eth1 (206.124.146.176/32). Note that I configure
the same IP address on both <filename class="devicefile">eth1</filename>
and <filename class="devicefile">eth2</filename>.</para>
<para>In this configuration:</para>
<itemizedlist>
<listitem>
<para>I use one-to-one NAT for Ursa (my personal system that run SuSE
10.0) - Internal address 192.168.1.5 and external address
206.124.146.178.</para>
</listitem>
<listitem>
<para>I use one-to-one NAT for Eastepnc6000 (My work system -- Windows
XP SP1). Internal address 192.168.1.6 and external address
206.124.146.180.</para>
</listitem>
<listitem>
<para>I use SNAT through 206.124.146.179 for&nbsp;my Wife's Windows XP
system <quote>Tarry</quote>, my <firstterm>crash and burn</firstterm>
system "Wookie", and our SuSE 10.0 laptop <quote>Tipper</quote> which
connects through the Wireless Access Point (wap) via a Wireless Bridge
(wet), and my work laptop (eastepnc6000) when it is not docked in my
office.<note>
<para>While the distance between the WAP and where I usually use
the laptop isn't very far (50 feet or so), using a WAC11 (CardBus
wireless card) has proved very unsatisfactory (lots of lost
connections). By replacing the WAC11 with the WET11 wireless
bridge, I have virtually eliminated these problems (Being an old
radio tinkerer (K7JPV), I was also able to eliminate the
disconnects by hanging a piece of aluminum foil on the family room
wall. Needless to say, my wife Tarry rejected that as a permanent
solution :-).</para>
</note></para>
</listitem>
</itemizedlist>
<itemizedlist>
<listitem>
<para>Squid runs on the DMZ server and is configured as a transparent
proxy.</para>
</listitem>
</itemizedlist>
<para>The firewall runs on a P-II/233 with Debian Sarge (testing).</para>
<para>Ursa runs Samba for file sharing with the Windows systems and is
configured as a Wins server.</para>
<para>The wireless network connects to the firewall's eth0 via a LinkSys
WAP11.&nbsp; In additional to using the rather weak WEP 40-bit encryption
(64-bit with the 24-bit preamble), I use <ulink
url="MAC_Validation.html">MAC verification</ulink> and <ulink
url="OPENVPN.html">OpenVPN</ulink>.</para>
<para>The single system in the DMZ (address 206.124.146.177) runs postfix,
Courier IMAP (imaps and pop3), DNS, a Web server (Apache) and an FTP
server (Pure-ftpd) under Fedora Core 4. The system also runs fetchmail to
fetch our email from our old and current ISPs. That server is accessible
from the Internet through <ulink url="ProxyARP.htm">Proxy
ARP</ulink>.</para>
<para>The firewall system itself runs a DHCP server that serves the local
and wireless networks.</para>
<para>All administration and publishing is done using ssh/scp. I have a
desktop environment installed on the firewall but I usually don't start
it. X applications tunnel through SSH to Ursa or one of the laptops. The
server also has a desktop environment installed but it is seldom started
either. For the most part, X tunneled through SSH is used for server
administration and the server runs at run level 3 (multi-user console mode
on Fedora).</para>
<para>I run an SNMP server on my firewall to serve <ulink
url="http://www.ee.ethz.ch/~oetiker/webtools/mrtg/">MRTG</ulink> running
in the DMZ.</para>
<para>The ethernet interface in the Server is configured with IP address
206.124.146.177, netmask 255.255.255.0. The server's default gateway is
206.124.146.254 (Router at my ISP. This is the same default gateway used
by the firewall itself). On the firewall, an entry in my
/etc/network/interfaces file (see below) adds a host route to
206.124.146.177 through eth1 when that interface is brought up.</para>
<para>The firewall is configured with OpenVPN for VPN access from our
second home in <ulink url="http://www.omakchamber.com/">Omak,
Washington</ulink> or when we are otherwise out of town. We run a second
instance of OpenVPN that is used to <ulink url="OPENVPN.html">bridge the
wireless laptops in the Wifi zone to the local lan</ulink>.</para>
<para><graphic align="center" fileref="images/network.png" /></para>
</section>
<section>
<title>Firewall Configuration</title>
<section>
<title>Shorewall.conf</title>
<blockquote>
<programlisting>STARTUP_ENABLED=Yes
LOGFILE=/var/log/messages
LOGFORMAT="Shorewall:%s:%s:"
LOGTAGONLY=No
LOGRATE=
LOGBURST=
LOGALLNEW=
BLACKLIST_LOGLEVEL=
MACLIST_LOG_LEVEL=$LOG
TCP_FLAGS_LOG_LEVEL=$LOG
RFC1918_LOG_LEVEL=$LOG
SMURF_LOG_LEVEL=$LOG
LOG_MARTIANS=No
IPTABLES=
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin
SHOREWALL_SHELL=/bin/dash
SUBSYSLOCK=
MODULESDIR=
CONFIG_PATH=/etc/shorewall:/usr/share/shorewall
RESTOREFILE=standard
IPSECFILE=zones
FW=
IP_FORWARDING=On
ADD_IP_ALIASES=Yes
ADD_SNAT_ALIASES=Yes
RETAIN_ALIASES=Yes
TC_ENABLED=Internal
CLEAR_TC=Yes
MARK_IN_FORWARD_CHAIN=Yes
CLAMPMSS=Yes
ROUTE_FILTER=No
DETECT_DNAT_IPADDRS=Yes
MUTEX_TIMEOUT=60
ADMINISABSENTMINDED=Yes
BLACKLISTNEWONLY=Yes
DELAYBLACKLISTLOAD=No
MODULE_SUFFIX=
DISABLE_IPV6=Yes
BRIDGING=Yes
DYNAMIC_ZONES=No
PKTTYPE=No
RFC1918_STRICT=Yes
MACLIST_TTL=60
SAVE_IPSETS=Yes
MAPOLDACTIONS=No
FASTACCEPT=No
BLACKLIST_DISPOSITION=DROP
MACLIST_TABLE=mangle
MACLIST_DISPOSITION=DROP
TCP_FLAGS_DISPOSITION=DROP</programlisting>
</blockquote>
</section>
<section>
<title>Params File (Edited)</title>
<blockquote>
<para><programlisting>NTPSERVERS=&lt;list of NTP server IP addresses&gt;
POPSERVERS=&lt;list of external POP3 servers accessed by fetchmail running on the DMZ server&gt;
LOG=info
WIFI_IF=eth0
EXT_IF=eth2
INT_IF=br0
DMZ_IF=eth1
OMAK=&lt;ip address of the gateway at our second home&gt;</programlisting></para>
</blockquote>
</section>
<section>
<title>Zones File</title>
<blockquote>
<programlisting>#ZONE TYPE OPTTIONS IN OUT
# OPTIONS OPTIONS
fw firewall
net ipv4
dmz ipv4
loc ipv4
vpn ipv4
Wifi ipv4
#LAST LINE - ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>Interfaces File</title>
<blockquote>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
net $EXT_IF 206.124.146.255 dhcp,norfc1918,logmartians,blacklist,tcpflags,nosmurfs
loc $INT_IF detect dhcp,routeback
dmz $DMZ_IF -
vpn tun+ -
Wifi $WIFI_IF - dhcp,maclist
#LAST LINE - ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>Routestopped File</title>
<blockquote>
<programlisting>#INTERFACE HOST(S) OPTIONS
$DMZ_IF 206.124.146.177 source
$INT_IF - source,dest
$WIFI_IF - source,dest
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>Providers File</title>
<blockquote>
<para>This entry isn't necessary but it allows me to smoke test
parsing of the providers file.</para>
<programlisting>#NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS COPY
Blarg 1 1 main $EXT_IF 206.124.146.254 track,balance=1 $INT_IF,$DMZ_IF,$WIFI_IF,tun0
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
</programlisting>
</blockquote>
</section>
<section>
<title>Blacklist File</title>
<blockquote>
<para>I use <ulink url="ipsets.html">ipsets</ulink> to represent my
blacklist.</para>
<programlisting>#ADDRESS/SUBNET PROTOCOL PORT
+Blacklistports[dst]
+Blacklistnets[src,dst]
+Blacklist[src,dst]
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>RFC1918 File</title>
<blockquote>
<para>Because my DSL modem has an RFC 1918 address (192.168.1.1) and
is connected to eth0, I need to make an exception for that address in
my rfc1918 file. I copied /usr/share/shorewall/rfc1918 to
/etc/shorewall/rfc1918 and changed it as follows:</para>
<programlisting>#SUBNET TARGET
<emphasis role="bold">192.168.1.1 RETURN</emphasis>
172.16.0.0/12 logdrop # RFC 1918
192.168.0.0/16 logdrop # RFC 1918
10.0.0.0/8 logdrop # RFC 1918
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
</programlisting>
</blockquote>
</section>
<section>
<title>Policy File</title>
<blockquote>
<programlisting>#SOURCE DESTINATION POLICY LOG LEVEL BURST:LIMIT
$FW $FW ACCEPT
loc net ACCEPT
$FW vpn ACCEPT
vpn net ACCEPT
vpn loc ACCEPT
fw Wifi ACCEPT
loc vpn ACCEPT
$FW loc ACCEPT #Firewall to Local
loc $FW REJECT $LOG
net all DROP $LOG 10/sec:40
all all REJECT $LOG
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>Masq File</title>
<blockquote>
<para>Although most of our internal systems use one-to-one NAT, my
wife's system (192.168.1.4) uses IP Masquerading (actually SNAT) as do
our wireless network systems and visitors with laptops.</para>
<para>The first entry allows access to the DSL modem and uses features
introduced in Shorewall 2.1.1. The leading plus sign ("+_") causes the
rule to be placed before rules generated by the /etc/shorewall/nat
file below. The double colons ("::") cause the entry to be exempt from
ADD_SNAT_ALIASES=Yes in my shorewall.conf file above.</para>
<programlisting>#INTERFACE SUBNET ADDRESS PROTO PORT
+$EXT_IF::192.168.1.1 0.0.0.0/0 192.168.1.254
$EXT_IF:2 192.168.0.0/22 206.124.146.179
$DMZ_IF:: 206.124.146.176 192.168.1.254 tcp 80
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>NAT File</title>
<blockquote>
<programlisting>#EXTERNAL INTERFACE INTERNAL ALL INTERFACES LOCAL
206.124.146.178 $EXT_IF:0 192.168.1.5 No No
206.124.146.180 $EXT_IF:1 192.168.1.6 No No
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section id="ProxyARP">
<title>Proxy ARP File</title>
<blockquote>
<para>I configure the host route to 206.124.146.177 on <filename
class="devicefile">eth1</filename> in <link
linkend="debian_interfaces">/etc/network/interfaces</link>.</para>
<programlisting>#ADDRESS INTERFACE EXTERNAL HAVEROUTE PERSISTENT
206.124.146.177 $DMZ_IF $EXT_IF yes
192.168.1.1 $EXT_IF $INT_IF yes # Allow access to DSL modem from the local zone
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>Tunnels</title>
<blockquote>
<programlisting>#TYPE ZONE GATEWAY GATEWAY ZONE PORT
openvpnserver:1194 net 0.0.0.0/0
openvpnserver:1194 Wifi 192.168.3.0/24
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section id="Actions">
<title>Actions File</title>
<blockquote>
<programlisting>#ACTION
Mirrors #Accept traffic from the Shorewall Mirror sites
SSHKnock #Port Knocking
#LAST LINE - ADD YOUR ENTRIES ABOVE THIS ONE - DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>action.Mirrors File</title>
<blockquote>
<para>The <emphasis>Mirrors</emphasis> and
<emphasis>Mirrornets</emphasis> <ulink
url="ipsets.html">ipsets</ulink> define the set of Shorewall
mirrors.</para>
<programlisting>#TARGET SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE
# PORT PORT(S) DEST LIMIT
ACCEPT +Mirrors
ACCEPT +Mirrornets
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>Rules File (The shell variables are set in
/etc/shorewall/params)</title>
<blockquote>
<programlisting>###############################################################################################################################################################################
#ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/
# PORT PORT(S) DEST LIMIT GROUP
###############################################################################################################################################################################
SECTION NEW
REJECT:$LOG loc net tcp 25
REJECT:$LOG loc net udp 1025:1031
#
# Stop NETBIOS crap
#
REJECT loc net tcp 137,445
REJECT loc net udp 137:139
#
# Stop my idiotic work laptop from sending to the net with an HP source/dest IP address
#
DROP loc:!192.168.0.0/22 net
DROP Wifi net:15.0.0.0/8
DROP Wifi net:16.0.0.0/8
###############################################################################################################################################################################
# Local Network to Firewall
#
DROP loc:!192.168.0.0/22 fw # Silently drop traffic with an HP source IP from my XP box
ACCEPT loc fw tcp ssh,time,631,8080
ACCEPT loc fw udp 161,ntp,631
DROP loc fw tcp 3185 #SuSE Meta pppd
Ping/ACCEPT loc fw
###############################################################################################################################################################################
# Roadwarriors to Firewall
#
ACCEPT vpn fw tcp ssh,time,631,8080
ACCEPT vpn fw udp 161,ntp,631
Ping/ACCEPT vpn fw
###############################################################################################################################################################################
# Local Network to DMZ
#
DNAT- loc dmz:206.124.146.177:3128 \
tcp www - !206.124.146.177,192.168.1.1
DROP loc:!192.168.0.0/22 dmz
ACCEPT loc dmz udp domain,xdmcp
ACCEPT loc dmz tcp www,smtp,smtps,domain,ssh,imap,https,imaps,ftp,10023,pop3,3128 -
Ping/ACCEPT loc dmz
###############################################################################################################################################################################
# Insecure Wireless to DMZ
#
ACCEPT Wifi dmz udp domain
ACCEPT Wifi dmz tcp domain
###############################################################################################################################################################################
# Insecure Wireless to Internet
#
ACCEPT Wifi net udp 500
ACCEPT Wifi net udp 4500
Ping/ACCEPT Wifi net
###############################################################################################################################################################################
# Road Warriors to DMZ
#
ACCEPT vpn dmz udp domain
ACCEPT vpn dmz tcp www,smtp,smtps,domain,ssh,imap,https,imaps,ftp,10023,pop3 -
Ping/ACCEPT vpn dmz
###############################################################################################################################################################################
# Internet to ALL -- drop NewNotSyn packets
#
dropNotSyn net fw tcp
dropNotSyn net loc tcp
dropNotSyn net dmz tcp
###############################################################################################################################################################################
# Internet to DMZ
#
ACCEPT net dmz udp domain
ACCEPT net dmz tcp smtps,www,ftp,imaps,domain,https -
ACCEPT net dmz tcp smtp - 206.124.146.177,206.124.146.178
ACCEPT net dmz udp 33434:33454
Mirrors net dmz tcp rsync
ACCEPT net dmz tcp 22
Ping/ACCEPT net dmz
###############################################################################################################################################################################
#
# Net to Local
#
# When I'm "on the road", the following two rules allow me VPN access back home using PPTP.
#
DNAT net loc:192.168.1.4 tcp 1729
DNAT net loc:192.168.1.4 gre
ACCEPT net:$OMAK loc:192.168.1.5 tcp 22
#
# Auth for IRC
#
ACCEPT net loc:192.168.1.5 tcp 113
#
# Real Audio
#
ACCEPT net loc:192.168.1.5 udp 6970:7170
#
# Overnet
#
#ACCEPT net loc:192.168.1.5 tcp 4662
#ACCEPT net loc:192.168.1.5 udp 12112
#
# OpenVPN
#
ACCEPT net loc:192.168.1.5 udp 1194
#
# Silently Handle common probes
#
REJECT net loc tcp www,ftp,https
DROP net loc icmp 8
###############################################################################################################################################################################
# DMZ to Internet
#
ACCEPT dmz net udp domain,ntp
ACCEPT dmz net tcp smtp,domain,www,81,https,whois,echo,2702,21,2703,ssh,8080,cvspserver
REJECT:$LOG dmz net udp 1025:1031
ACCEPT dmz net:$POPSERVERS tcp pop3
#
#
# OpenVPN
#
ACCEPT net loc:192.168.1.5 udp 1194
#
# Silently Handle common probes
#
REJECT net loc tcp www,ftp,https
DROP net loc icmp 8
###############################################################################################################################################################################
# DMZ to Firewall -- ntp &amp; snmp, Silently reject Auth
#
ACCEPT dmz fw udp ntp ntp
ACCEPT dmz fw tcp 161,ssh
ACCEPT dmz fw udp 161
REJECT dmz fw tcp auth
Ping/ACCEPT dmz fw
###############################################################################################################################################################################
# DMZ to Local Network
#
ACCEPT dmz loc tcp smtp,6001:6010
ACCEPT dmz:206.124.146.177 loc:192.168.1.5,192.168.1.3 \
tcp 111
ACCEPT dmz:206.124.146.177 loc:192.168.1.5,192.168.1.3 \
udp
Ping/ACCEPT dmz loc
###############################################################################################################################################################################
# Internet to Firewall
#
REJECT net fw tcp www,ftp,https
DROP net fw icmp 8
ACCEPT net fw udp 33434:33454
ACCEPT net:$OMAK fw udp ntp
ACCEPT net fw tcp auth
SSHKnock:info net fw tcp 22,4320,4321,4322
###############################################################################################################################################################################
# Firewall to Internet
#
ACCEPT fw net:$NTPSERVERS udp ntp ntp
#ACCEPT fw net:$POPSERVERS tcp pop3
ACCEPT fw net udp domain
ACCEPT fw net tcp domain,www,https,ssh,1723,whois,1863,ftp,2702,2703,7
ACCEPT fw net udp 33435:33535
ACCEPT fw net icmp
REJECT:$LOG fw net udp 1025:1031
DROP fw net udp ntp
Ping/ACCEPT fw net
###############################################################################################################################################################################
# Firewall to DMZ
#
ACCEPT fw dmz tcp www,ftp,ssh,smtp,993,465
ACCEPT fw dmz udp domain
REJECT fw dmz udp 137:139
Ping/ACCEPT fw dmz
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>/etc/shorewall/tcdevices</title>
<blockquote>
<programlisting>#INTERFACE IN-BANDWITH OUT-BANDWIDTH
$EXT_IF 1.5mbit 384kbit
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>/etc/shorewall/tcclasses</title>
<blockquote>
<para>My traffic shaping configuration is the "WonderShaper" <ulink
url="http://www1.shorewall.net/pub/shorewall/Samples/tc4shorewall">example
from tc4shorewall</ulink>.</para>
<programlisting>#INTERFACE MARK RATE CEIL PRIORITY OPTIONS
$EXT_IF 10 full ful 1 tcp-ack,tos-minimize-delay
$EXT_IF 20 9*full/10 9*full/10 2 default
$EXT_IF 30 6*full/10 6*full/10 3
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>/etc/shorewall/tcrules</title>
<blockquote>
<para>I give full bandwidth to my local systems -- the server gets
throttled and rsync gets throttled even more.</para>
<note>
<para>The class id for tc4shorewall-generated classes is 1:&lt;100 +
mark value&gt;. The rules below are using the Netfilter CLASSIFY
target to classify the traffic directly without having to first mark
then classify based on the marks.</para>
</note>
<programlisting>#MARK SOURCE DEST PROTO PORT(S) CLIENT USER TEST
# PORT(S)
1:110 192.168.0.0/22 $EXT_IF
1:130 206.124.146.177 $EXT_IF tcp - 873
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section id="debian_interfaces">
<title>/etc/network/interfaces</title>
<para>This file is Debian-specific and defines the configuration of the
network interfaces.</para>
<blockquote>
<programlisting># The loopback network interface
auto lo
iface lo inet loopback
# DMZ interface
auto eth1
iface eth1 inet static
address 206.124.146.176
netmask 255.255.255.255
broadcast 0.0.0.0
up ip route add 206.124.146.177 dev eth1
# Internet interface
auto eth2
iface eth2 inet static
address 206.124.146.176
netmask 255.255.255.0
gateway 206.124.146.254
up ip route add 192.168.1.1 dev eth2
# Wireless network
auto eth0
iface eth0 inet static
address 192.168.3.254
netmask 255.255.255.0
# LAN interface
auto br0
iface br0 inet static
address 192.168.1.254
netmask 255.255.255.0
pre-up /usr/sbin/openvpn --mktun --dev tap0
pre-up /sbin/ip link set tap0 up
pre-up /sbin/ip link set eth3 up
pre-up /usr/sbin/brctl addbr br0
pre-up /usr/sbin/brctl addif br0 eth3
pre-up /usr/sbin/brctl addif br0 tap0
up ip route add 224.0.0.0/4 dev br0
post-down /usr/sbin/brctl delif br0 eth3
post-down /usr/sbin/brctl delif br0 tap0
post-down /usr/sbin/brctl delbr br0
post-down /usr/sbin/openvpn --rmtun --dev tap0
# Unbrided LAN interface
iface eth3 inet static
address 192.168.1.254
netmask 255.255.255.0
up ip route add 224.0.0.0/4 dev eth3
# Second Internet interface
iface eth4 inet static
pre-up modprobe ne io=0x300 irq=10
address 206.124.146.179
netmask 255.255.255.0
</programlisting>
</blockquote>
</section>
<section>
<title>/etc/openvpn/server.conf</title>
<para>Only the tunnel-mode OpenVPN configuration is described here --
the bridge is described in the <ulink url="OPENVPN.html">OpenVPN
documentation</ulink>.</para>
<blockquote>
<programlisting>dev tun
local 206.124.146.176
server 192.168.2.0 255.255.255.0
dh dh1024.pem
ca /etc/certs/cacert.pem
crl-verify /etc/certs/crl.pem
cert /etc/certs/gateway.pem
key /etc/certs/gateway_key.pem
port 1194
comp-lzo
user nobody
group nogroup
keepalive 15 45
ping-timer-rem
persist-tun
persist-key
client-config-dir /etc/openvpn/clients
ccd-exclusive
client-to-client
verb 3
</programlisting>
</blockquote>
</section>
</section>
<section>
<title>Tipper Configuration while on the Road</title>
<para>This laptop is either configured on our wireless network
(192.168.3.8) or as a standalone system on the road.</para>
<para>Tipper's view of the world is shown in the following diagram:</para>
<graphic align="center" fileref="images/network2.png" valign="middle" />
<section>
<title>zones</title>
<blockquote>
<programlisting>#ZONE DISPLAY COMMENTS
home Home Shorewall Network
net Net Internet
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE
</programlisting>
</blockquote>
</section>
<section>
<title>policy</title>
<blockquote>
<programlisting>#SOURCE DEST POLICY LOG LEVEL LIMIT:BURST
$FW net ACCEPT
$FW home ACCEPT
home $FW ACCEPT
net home NONE
home net NONE
net all DROP info
# The FOLLOWING POLICY MUST BE LAST
all all REJECT info
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>interfaces</title>
<blockquote>
<programlisting>#ZONE INTERFACE BROADCAST OPTIONS
net eth0 detect dhcp,tcpflags
home tun0 -
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>rules</title>
<blockquote>
<programlisting>#ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL RATE USER/
# PORT PORT(S) DEST LIMIT GROUP
ACCEPT net $FW icmp 8
ACCEPT net $FW tcp 22
ACCEPT net $FW tcp 4000:4100
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE</programlisting>
</blockquote>
</section>
<section>
<title>/etc/openvpn/home.conf</title>
<blockquote>
<programlisting>dev tun
remote gateway.shorewall.net
up /etc/openvpn/home.up
tls-client
pull
ca /etc/certs/cacert.pem
cert /etc/certs/tipper.pem
key /etc/certs/tipper_key.pem
port 1194
user nobody
group nogroup
comp-lzo
ping 15
ping-restart 45
ping-timer-rem
persist-tun
persist-key
verb 3</programlisting>
</blockquote>
</section>
<section>
<title>/etc/openvpn/home.up</title>
<blockquote>
<programlisting>#!/bin/bash
ip route add 192.168.1.0/24 via $5 #Access to Home Network
ip route add 206.124.146.177/32 via $5 #So that DNS names will resolve in my
#Internal Bind 9 view because the source IP will
#be in 192.168.2.0/24</programlisting>
</blockquote>
</section>
</section>
</article>