shorewall_code/manpages6/shorewall6-routestopped.xml
Tom Eastep 0a5d5821ec Support additional forms of column/value pair specification
Signed-off-by: Tom Eastep <teastep@shorewall.net>
2011-10-02 11:45:55 -07:00

194 lines
7.2 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
"http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd">
<refentry>
<refmeta>
<refentrytitle>shorewall6-routestopped</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>routestopped</refname>
<refpurpose>The Shorewall6 file that governs what traffic flows through
the firewall while it is in 'stopped' state.</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>/etc/shorewall6/routestopped</command>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>This file is used to define the hosts that are accessible when the
firewall is stopped or is being stopped. When shorewall6-shell is being
used, the file also determines those hosts that are accessible when the
firewall is in the process of being [re]started.</para>
<para>The columns in the file are as follows (where the column name is
followed by a different name in parentheses, the different name is used in
the alternate specification syntax).</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">INTERFACE</emphasis> -
<emphasis>interface</emphasis></term>
<listitem>
<para>Interface through which host(s) communicate with the
firewall</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">HOST(S)</emphasis> - [<emphasis
role="bold">-</emphasis>|<emphasis>address</emphasis>[,<emphasis>address</emphasis>]...]</term>
<listitem>
<para>Optional comma-separated list of IP/subnet addresses. If your
kernel and ip6tables include iprange match support, IP address
ranges are also allowed.</para>
<para>If left empty or supplied as "-", 0.0.0.0/0 is assumed.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">OPTIONS</emphasis> - [<emphasis
role="bold">-</emphasis>|<emphasis>option</emphasis>[<emphasis
role="bold">,</emphasis><emphasis>option</emphasis>]...]</term>
<listitem>
<para>An optional comma-separated list of options. The order of the
options is not important but the list can contain no embedded
whitespace. The currently-supported options are:</para>
<variablelist>
<varlistentry>
<term><emphasis role="bold">routeback</emphasis></term>
<listitem>
<para>Set up a rule to ACCEPT traffic from these hosts back to
themselves. Beginning with Shorewall 4.4.9, this option is
automatically set if <emphasis
role="bold">routeback</emphasis> is specified in <ulink
url="shorewall6-interfaces.html">shorewall6-interfaces</ulink>
(5) or if the rules compiler detects that the interface is a
bridge.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">source</emphasis></term>
<listitem>
<para>Allow traffic from these hosts to ANY destination.
Without this option or the <emphasis
role="bold">dest</emphasis> option, only traffic from this
host to other listed hosts (and the firewall) is allowed. If
<emphasis role="bold">source</emphasis> is specified then
<emphasis role="bold">routeback</emphasis> is
redundant.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">dest</emphasis></term>
<listitem>
<para>Allow traffic to these hosts from ANY source. Without
this option or the <emphasis role="bold">source</emphasis>
option, only traffic from this host to other listed hosts (and
the firewall) is allowed. If <emphasis
role="bold">dest</emphasis> is specified then <emphasis
role="bold">routeback</emphasis> is redundant.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><emphasis role="bold">critical</emphasis></term>
<listitem>
<para>Allow traffic between the firewall and these hosts
throughout '[re]start', 'stop' and 'clear'. Specifying
<emphasis role="bold">critical</emphasis> on one or more
entries will cause your firewall to be "totally open" for a
brief window during each of those operations. Examples of
where you might want to use this are:</para>
<itemizedlist>
<listitem>
<para>'Ping' nodes with heartbeat.</para>
</listitem>
<listitem>
<para>LDAP server(s) if you use LDAP Authentication</para>
</listitem>
<listitem>
<para>NFS Server if you have an NFS-mounted root
filesystem.</para>
</listitem>
</itemizedlist>
</listitem>
</varlistentry>
</variablelist>
</listitem>
</varlistentry>
</variablelist>
<note>
<para>The <emphasis role="bold">source</emphasis> and <emphasis
role="bold">dest</emphasis> options work best when used in conjunction
with ADMINISABSENTMINDED=Yes in <ulink
url="shorewall6.conf.html">shorewall6.conf</ulink>(5).</para>
</note>
</refsect1>
<refsect1>
<title>Example</title>
<variablelist>
<varlistentry>
<term>Example 1:</term>
<listitem>
<programlisting> #INTERFACE HOST(S) OPTIONS
eth2 2002:ce7c:92b4::/64
eth0 2002:ce7c:92b4:1::/64
br0 - routeback
eth3 - source</programlisting>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>FILES</title>
<para>/etc/shorewall6/routestopped</para>
</refsect1>
<refsect1>
<title>See ALSO</title>
<para><ulink
url="http://shorewall.net/starting_and_stopping_shorewall.htm">http://shorewall.net/starting_and_stopping_shorewall.htm</ulink></para>
<para><ulink
url="http://shorewall.net/configuration_file_basics.htm#Pairs">http://shorewall.net/configuration_file_basics.htm#Pairs</ulink></para>
<para>shorewall6(8), shorewall6-accounting(5), shorewall6-actions(5),
shorewall6-blacklist(5), shorewall6-hosts(5), shorewall6-interfaces(5),
shorewall6-maclist(5), shoewall6-netmap(5),shorewall6-params(5),
shorewall6-policy(5), shorewall6-providers(5), shorewall6-route_rules(5),
shorewall6-rules(5), shorewall6.conf(5), shorewall6-secmarks(5),
shorewall6-tcclasses(5), shorewall6-tcdevices(5), shorewall6-tcrules(5),
shorewall6-tos(5), shorewall6-tunnels(5), shorewall6-zones(5)</para>
</refsect1>
</refentry>