shorewall_code/Shorewall2/hosts
2004-03-17 22:42:11 +00:00

59 lines
2.0 KiB
INI

#
# Shorewall 2.0 - /etc/shorewall/hosts
#
# THE ONLY TIME YOU NEED THIS FILE IS WHERE YOU HAVE MORE THAN
# ONE ZONE CONNECTED THROUGH A SINGLE INTERFACE.
#
# IF YOU DON'T HAVE THAT SITUATION THEN DON'T TOUCH THIS FILE.
#
# This file is used to define zones in terms of subnets and/or
# individual IP addresses. Most simple setups don't need to
# (should not) place anything in this file.
#
# ZONE - The name of a zone defined in /etc/shorewall/zones
#
# HOST(S) - The name of an interface defined in the
# /etc/shorewall/interfaces file followed by a colon (":") and
# a comma-separated list whose elements are either:
#
# a) The IP address of a host
# b) A subnetwork in the form
# <subnet-address>/<mask width>
# c) A physical port name; only allowed when the
# interface names a bridge created by the
# brctl addbr command. This port must not
# be defined in /etc/shorewall/interfaces and may
# optionally followed by a colon (":") and a
# host or network IP.
# See http://www.shorewall.net/Bridge.html for details.
#
# Examples:
#
# eth1:192.168.1.3
# eth2:192.168.2.0/24
# eth3:192.168.2.0/24,192.168.3.1
# br0:eth4
# br0:eth0:192.168.1.16/28
#
# OPTIONS - A comma-separated list of options. Currently-defined
# options are:
#
# maclist - Connection requests from these hosts
# are compared against the contents of
# /etc/shorewall/maclist. If this option
# is specified, the interface must be
# an ethernet NIC and must be up before
# Shorewall is started.
#
# routeback - Shorewall show set up the infrastructure
# to pass packets from this/these
# address(es) back to themselves. This is
# necessary of hosts in this group use the
# services of a transparent proxy that is
# a member of the group or if DNAT is used
# to send requests originating from this
# group to a server in the group.
#
#ZONE HOST(S) OPTIONS
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS LINE -- DO NOT REMOVE