1
0
shorewall_code/Shorewall-docsN/PPTP.xml
teastep 9fd5780f36 Initial revision
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@1439 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
2004-07-03 15:51:55 +00:00

1457 lines
36 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<article id="PPTP">
<!--$Id$-->
<articleinfo>
<title>PPTP</title>
<authorgroup>
<author>
<firstname>Tom</firstname>
<surname>Eastep</surname>
</author>
</authorgroup>
<pubdate>2004-05-22</pubdate>
<copyright>
<year>2001</year>
<year>2002</year>
<year>2003</year>
<year>2004</year>
<holder>Thomas M. Eastep</holder>
</copyright>
<legalnotice>
<para>Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version
1.2 or any later version published by the Free Software Foundation; with
no Invariant Sections, with no Front-Cover, and with no Back-Cover
Texts. A copy of the license is included in the section entitled
<quote><ulink url="GnuCopyright.htm">GNU Free Documentation License</ulink></quote>.</para>
</legalnotice>
<revhistory>
<revision>
<revnumber>1.3</revnumber>
<date>2004-05-22</date>
<authorinitials>TE</authorinitials>
<revremark>Warning about PPTP conntrack patch and GRE tunnels.</revremark>
</revision>
<revision>
<revnumber>1.2</revnumber>
<date>2004-04-15</date>
<authorinitials>TE</authorinitials>
<revremark>Revised instructions regarding PPTP conntrack patch.</revremark>
</revision>
<revision>
<revnumber>1.1</revnumber>
<date>2003-12-23</date>
<authorinitials>TE</authorinitials>
<revremark>Added note about PPTP module support in Bering 1.2</revremark>
</revision>
</revhistory>
<abstract>
<para>Shorewall easily supports PPTP in a number of configurations.</para>
</abstract>
</articleinfo>
<section>
<title>Overview</title>
<note>
<para>I am no longer attempting to maintain MPPE patches for current
Linux kernel&#39;s and pppd. I recommend that you refer to the following
URLs for information about installing MPPE into your kernel and pppd.</para>
</note>
<para>The <ulink url="http://pptpclient.sourceforge.net">Linux PPTP client
project</ulink> has a nice GUI for configuring and managing VPN
connections where your Linux system is the PPTP client. This is what I
currently use. I am no longer running PoPToP but rather I use the PPTP
Server included with XP Professional (see <ulink
url="PPTP.htm#ServerBehind">PPTP Server running behind your Firewall</ulink>
below).</para>
<variablelist>
<varlistentry>
<term><ulink url="http://pptpclient.sourceforge.net">http://pptpclient.sourceforge.net</ulink></term>
<listitem>
<para>Everything you need to run a PPTP client.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><ulink url="http://www.poptop.org">http://www.poptop.org</ulink></term>
<listitem>
<para>The <quote>kernelmod</quote> package can be used to quickly
install MPPE into your kernel without rebooting.</para>
</listitem>
</varlistentry>
</variablelist>
<para>I am leaving the instructions for building MPPE-enabled kernels and
pppd in the text below for those who may wish to obtain the relevant
current patches and <quote>roll their own</quote>.</para>
</section>
<section id="ServerFW">
<title>PPTP Server Running on your Firewall</title>
<para>I will try to give you an idea of how to set up a PPTP server on
your firewall system. This isn&#39;t a detailed HOWTO but rather an
example of how I have set up a working PPTP server on my own firewall.</para>
<para>The steps involved are:</para>
<orderedlist>
<listitem>
<para><xref linkend="PatchPppd" /></para>
</listitem>
<listitem>
<para><xref linkend="PatchKernel" /></para>
</listitem>
<listitem>
<para><xref linkend="Samba" /></para>
</listitem>
<listitem>
<para><xref linkend="ConfigPppd" /></para>
</listitem>
<listitem>
<para><xref linkend="ConfigPptpd" /></para>
</listitem>
<listitem>
<para><xref linkend="ConfigFw" /></para>
</listitem>
</orderedlist>
<section id="PatchPppd">
<title>Patching and building pppd</title>
<para>To run pppd on a 2.4 kernel, you need the pppd 2.4.1 or later. The
primary site for releases of pppd is <ulink
url="ftp://ftp.samba.org/pub/ppp">ftp://ftp.samba.org/pub/ppp</ulink>.</para>
<para>You will need the following patches:</para>
<simplelist>
<member><ulink
url="http://www.shorewall.net/pub/shorewall/pptp/ppp-2.4.1-openssl-0.9.6-mppe-patch.gz">http://www.shorewall.net/pub/shorewall/pptp/ppp-2.4.1-openssl-0.9.6-mppe-patch.gz</ulink></member>
<member><ulink
url="http://www.shorewall.net/pub/shorewall/pptp/ppp-2.4.1-MSCHAPv2-fix.patch.gz">http://www.shorewall.net/pub/shorewall/pptp/ppp-2.4.1-MSCHAPv2-fix.patch.gz</ulink></member>
</simplelist>
<para>You may also want the following patch if you want to require
remote hosts to use encryption:</para>
<simplelist>
<member><ulink
url="ftp://ftp.shorewall.net/pub/shorewall/pptp/require-mppe.diff">ftp://ftp.shorewall.net/pub/shorewall/pptp/require-mppe.diff</ulink></member>
</simplelist>
<para>Un-tar the pppd source and uncompress the patches into one
directory (the patches and the ppp-2.4.1 directory are all in a single
parent directory):</para>
<programlisting>cd ppp-2.4.1
patch -p1 &#60; ../ppp-2.4.0-openssl-0.9.6-mppe.patch
patch -p1 &#60; ../ppp-2.4.1-MSCHAPv2-fix.patch
(Optional) patch -p1 &#60; ../require-mppe.diff
./configure
make</programlisting>
<para>You will need to install the resulting binary on your firewall
system. To do that, I NFS mount my source filesystem and use
<quote>make install</quote> from the ppp-2.4.1 directory.</para>
</section>
<section id="PatchKernel">
<title>Patching and building your Kernel</title>
<para>You will need one of the following patches depending on your
kernel version:</para>
<simplelist>
<member>http://www.shorewall.net/pub/shorewall/pptp/linux-2.4.4-openssl-0.9.6a-mppe-patch.gz</member>
<member>http://www.shorewall/net/pub/shorewall/pptp/linux-2.4.16-openssl-0.9.6b-mppe-patch.gz</member>
</simplelist>
<para>Uncompress the patch into the same directory where your top-level
kernel source is located and:</para>
<programlisting>cd &#60;your GNU/Linux source top-level directory&#62;
patch -p1 &#60; ../linux-2.4.16-openssl-0.9.6b-mppe.patch</programlisting>
<para>Now configure your kernel. Here is my ppp configuration:</para>
<graphic fileref="images/ppp.jpg" />
</section>
<section id="Samba">
<title>Configuring Samba</title>
<para>You will need a WINS server (Samba configured to run as a WINS
server is fine). Global section from /etc/samba/smb.conf on my WINS
server (192.168.1.3) is:</para>
<programlisting>[global]
workgroup = TDM-NSTOP
netbios name = WOOKIE
server string = GNU/Linux Box
encrypt passwords = Yes
log file = /var/log/samba/%m.log
max log size = 0
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
os level = 65
domain master = True
preferred master = True
dns proxy = No
wins support = Yes
printing = lprng
[homes]
comment = Home Directories
valid users = %S
read only = No
create mask = 0664
directory mask = 0775
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes</programlisting>
</section>
<section id="ConfigPppd">
<title>Configuring pppd</title>
<para>Here is a copy of my /etc/ppp/options.poptop file:</para>
<programlisting>ipparam PoPToP
lock
mtu 1490
mru 1490
ms-wins 192.168.1.3
ms-dns 206.124.146.177
multilink
proxyarp
auth
+chap
+chapms
+chapms-v2
ipcp-accept-local
ipcp-accept-remote
lcp-echo-failure 30
lcp-echo-interval 5
deflate 0
mppe-128
mppe-stateless
require-mppe
require-mppe-stateless</programlisting>
<note>
<itemizedlist>
<listitem>
<para>System 192.168.1.3 acts as a WINS server so I have included
that IP as the <quote>ms-wins</quote> value.</para>
</listitem>
<listitem>
<para>I have pointed the remote clients at my DNS server -- it has
external address 206.124.146.177.</para>
</listitem>
<listitem>
<para>I am requiring 128-bit stateless compression (my kernel is
built with the <quote>require-mppe.diff</quote> patch mentioned
above.</para>
</listitem>
</itemizedlist>
</note>
<para>Here&#39;s my /etc/ppp/chap-secrets:</para>
<programlisting>Secrets for authentication using CHAP
# client server secret IP addresses
CPQTDM\\TEastep * &#60;shhhhhh&#62; 192.168.1.7
TEastep * &#60;shhhhhh&#62; 192.168.1.7</programlisting>
<para>I am the only user who connects to the server but I may connect
either with or without a domain being specified. The system I connect
from is my laptop so I give it the same IP address when tunneled in at
it has when I use its wireless LAN card around the house.</para>
<para>You will also want the following in /etc/modules.conf:</para>
<programlisting>alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate</programlisting>
</section>
<section id="ConfigPptpd">
<title>Configuring pptpd</title>
<para>PoPTop (pptpd) is available from <ulink
url="http://poptop.lineo.com/">http://poptop.lineo.com/</ulink>.</para>
<para>Here is a copy of my /etc/pptpd.conf file:</para>
<programlisting>option /etc/ppp/options.poptop
speed 115200
localip 192.168.1.254
remoteip 192.168.1.33-38</programlisting>
<note>
<itemizedlist>
<listitem>
<para>I specify the /etc/ppp/options.poptop file as my ppp options
file (I have several).</para>
</listitem>
<listitem>
<para>The local IP is the same as my internal interface&#39;s
(192.168.1.254).</para>
</listitem>
<listitem>
<para>I have assigned a remote IP range that overlaps my local
network. This, together with <quote>proxyarp</quote> in my
/etc/ppp/options.poptop file make the remote hosts look like they
are part of the local subnetwork.</para>
</listitem>
</itemizedlist>
</note>
<para>I use this file to start/stop pptpd -- I have this in
/etc/init.d/pptpd:</para>
<programlisting>#!/bin/sh
#
# /etc/rc.d/init.d/pptpd
#
# chkconfig: 5 12 85
# description: control pptp server
#
case &#34;$1&#34; in
start)
echo 1 &#62; /proc/sys/net/ipv4/ip_forward
modprobe ppp_async
modprobe ppp_generic
modprobe ppp_mppe
modprobe slhc
if /usr/local/sbin/pptpd; then
touch /var/lock/subsys/pptpd
fi
;;
stop)
killall pptpd
rm -f /var/lock/subsys/pptpd
;;
restart)
killall pptpd
if /usr/local/sbin/pptpd; then
touch /var/lock/subsys/pptpd
fi
;;
status)
ifconfig
;;
*)
echo &#34;Usage: $0 {start|stop|restart|status}&#34;
;;
esac</programlisting>
</section>
<section id="ConfigFw">
<title>Configuring Shorewall</title>
<section>
<title>Basic Setup</title>
<para>Here&#39; a basic setup that treats your remote users as if they
were part of your <emphasis role="bold">loc</emphasis> zone. Note that
if your primary internet connection uses ppp0, then be sure that
<emphasis role="bold">loc</emphasis> follows <emphasis role="bold">net</emphasis>
in /etc/shorewall/zones.</para>
<table>
<title>/etc/shorewall/tunnels</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">TYPE</entry>
<entry align="center">ZONE</entry>
<entry align="center">GATEWAY</entry>
<entry align="center">GATEWAY ZONE</entry>
</row>
</thead>
<tbody>
<row>
<entry>pptpserver</entry>
<entry>net</entry>
<entry>0.0.0.0/0</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/interfaces</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">INTERFACE</entry>
<entry align="center">BROADCAST</entry>
<entry align="center">OPTIONS</entry>
</row>
</thead>
<tbody>
<row>
<entry>loc</entry>
<entry>ppp+</entry>
<entry>-</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
</section>
<section>
<title>Remote Users in a Separate Zone</title>
<para>If you want to place your remote users in their own zone so that
you can control connections between these users and the local network,
follow this example. Note that if your primary internet connection
uses ppp0 then be sure that <emphasis role="bold">vpn</emphasis>
follows <emphasis role="bold">net</emphasis> in /etc/shorewall/zones
as shown below.</para>
<table>
<title>/etc/shorewall/tunnels</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">TYPE</entry>
<entry align="center">ZONE</entry>
<entry align="center">GATEWAY</entry>
<entry align="center">GATEWAY ZONE</entry>
</row>
</thead>
<tbody>
<row>
<entry>pptpserver</entry>
<entry>net</entry>
<entry>0.0.0.0/0</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/zones</title>
<tgroup cols="3">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">DISPLAY</entry>
<entry align="center">COMMENTS</entry>
</row>
</thead>
<tbody>
<row>
<entry>net</entry>
<entry>Internet</entry>
<entry>The Internet</entry>
</row>
<row>
<entry>loc</entry>
<entry>Local</entry>
<entry>Local Network</entry>
</row>
<row>
<entry>vpn</entry>
<entry>VPN</entry>
<entry>Remote Users</entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/interfaces</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">INTERFACE</entry>
<entry align="center">BROADCAST</entry>
<entry align="center">OPTIONS</entry>
</row>
</thead>
<tbody>
<row>
<entry>net</entry>
<entry>eth0</entry>
<entry>206.124.146.255</entry>
<entry>norfc1918</entry>
</row>
<row>
<entry>loc</entry>
<entry>eth2</entry>
<entry>192.168.10.255</entry>
<entry></entry>
</row>
<row>
<entry>vpn</entry>
<entry>ppp+</entry>
<entry>-</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<para>Your policies and rules may now be configured for traffic
to/from the <emphasis role="bold">vpn</emphasis> zone.</para>
</section>
<section>
<title>Multiple Remote Networks</title>
<para>Often there will be situations where you want multiple
connections from remote networks with these networks having different
firewalling requirements.<graphic fileref="images/MultiPPTP.png" /></para>
<para>Here&#39;s how you configure this in Shorewall. Note that if
your primary internet connection uses ppp0 then be sure that the
<emphasis role="bold">vpn{1-3}</emphasis> zones follows <emphasis
role="bold">net</emphasis> in /etc/shorewall/zones as shown below.</para>
<table>
<title>/etc/shorewall/tunnels</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">TYPE</entry>
<entry align="center">ZONE</entry>
<entry align="center">GATEWAY</entry>
<entry align="center">GATEWAY ZONE</entry>
</row>
</thead>
<tbody>
<row>
<entry>pptpserver</entry>
<entry>net</entry>
<entry>0.0.0.0/0</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/zones</title>
<tgroup cols="3">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">DISPLAY</entry>
<entry align="center">COMMENTS</entry>
</row>
</thead>
<tbody>
<row>
<entry>net</entry>
<entry>Internet</entry>
<entry>The Internet</entry>
</row>
<row>
<entry>loc</entry>
<entry>Local</entry>
<entry>Local Network</entry>
</row>
<row>
<entry>vpn1</entry>
<entry>Remote1</entry>
<entry>Remote Network 1</entry>
</row>
<row>
<entry>vpn2</entry>
<entry>Remote2</entry>
<entry>Remote Network 2</entry>
</row>
<row>
<entry>vpn3</entry>
<entry>Remote3</entry>
<entry>Remote Network 3</entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/interfaces</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">INTERFACE</entry>
<entry align="center">BROADCAST</entry>
<entry align="center">OPTIONS</entry>
</row>
</thead>
<tbody>
<row>
<entry>net</entry>
<entry>eth0</entry>
<entry>206.124.146.255</entry>
<entry>norfc1918</entry>
</row>
<row>
<entry>loc</entry>
<entry>eth2</entry>
<entry>192.168.10.255</entry>
<entry></entry>
</row>
<row>
<entry>-</entry>
<entry>ppp+</entry>
<entry>-</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/hosts</title>
<tgroup cols="3">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">HOST(S)</entry>
<entry align="center">OPTIONS</entry>
</row>
</thead>
<tbody>
<row>
<entry>vpn1</entry>
<entry>ppp+:192.168.1.0/24</entry>
<entry></entry>
</row>
<row>
<entry>vpn2</entry>
<entry>ppp+:192.168.2.0/24</entry>
<entry></entry>
</row>
<row>
<entry>vpn3</entry>
<entry>ppp+:192.168.3.0/24</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<para>Your policies and rules can now be configured using separate
zones (vpn1, vpn2, and vpn3) for the three remote network.</para>
</section>
</section>
</section>
<section id="ServerBehind">
<title>PPTP Server Running Behind your Firewall</title>
<para>If you have a single external IP address, add the following to your
/etc/shorewall/rules file:</para>
<table>
<title>/etc/shorewall/rules</title>
<tgroup cols="7">
<thead>
<row>
<entry align="center">ACTION</entry>
<entry align="center">SOURCE</entry>
<entry>DEST</entry>
<entry>PROTO</entry>
<entry>DEST PORT(S)</entry>
<entry>SOURCE PORT(S)</entry>
<entry>ORIGINAL DEST</entry>
</row>
</thead>
<tbody>
<row>
<entry>DNAT</entry>
<entry>net</entry>
<entry>loc:&#60;<emphasis>server address</emphasis>&#62;</entry>
<entry>tcp</entry>
<entry>1723</entry>
<entry></entry>
<entry></entry>
</row>
<row>
<entry>DNAT</entry>
<entry>net</entry>
<entry>loc:&#60;<emphasis>server address</emphasis>&#62;</entry>
<entry>47</entry>
<entry>-</entry>
<entry></entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<para>If you have multiple external IP address and you want to forward a
single &#60;<emphasis>external address</emphasis>&#62;, add the following
to your /etc/shorewall/rules file:</para>
<table>
<title>/etc/shorewall/rules</title>
<tgroup cols="7">
<thead>
<row>
<entry align="center">ACTION</entry>
<entry align="center">SOURCE</entry>
<entry>DEST</entry>
<entry>PROTO</entry>
<entry>DEST PORT(S)</entry>
<entry>SOURCE PORT(S)</entry>
<entry>ORIGINAL DEST</entry>
</row>
</thead>
<tbody>
<row>
<entry>DNAT</entry>
<entry>net</entry>
<entry>loc:&#60;<emphasis>server address</emphasis>&#62;</entry>
<entry>tcp</entry>
<entry>1723</entry>
<entry>-</entry>
<entry>&#60;<emphasis>external address</emphasis>&#62;</entry>
</row>
<row>
<entry>DNAT</entry>
<entry>net</entry>
<entry>loc:&#60;<emphasis>server address</emphasis>&#62;</entry>
<entry>47</entry>
<entry>-</entry>
<entry>-</entry>
<entry>&#60;<emphasis>external address</emphasis>&#62;</entry>
</row>
</tbody>
</tgroup>
</table>
</section>
<section id="ClientsBehind">
<title>PPTP Clients Running Behind your Firewall</title>
<para>You shouldn&#39;t have to take any special action for this case
unless you wish to connect multiple clients to the same external server.
In that case, you must install the PPTP connection/tracking and NAT patch
from <ulink url="http://www.netfilter.org">Netfilter Patch-O-Mati</ulink>c
(some distributions are now shipping with this patch installed). I
recommend that you also add these four lines to your
/etc/shorewall/modules file:</para>
<programlisting>loadmodule ip_conntrack_proto_gre
loadmodule ip_conntrack_pptp
loadmodule ip_nat_pptp
loadmodule ip_nat_proto_gre</programlisting>
<para>For LEAF/Bering users, the 2.4.20 kernel as already been patched as
described at the URL above and the three modules are included in the
Bering 1.2 modules tarball.</para>
<warning>
<para>Installing the above modules will prevent any GRE tunnels that you
have from working correctly.</para>
</warning>
</section>
<section id="ClientFW">
<title>PPTP Client Running on your Firewall</title>
<para>The PPTP GNU/Linux client is available at <ulink
url="http://sourceforge.net/projects/pptpclient/">http://sourceforge.net/projects/pptpclient/</ulink>.
Rather than use the configuration script that comes with the client, I
built my own. I also build my own kernel <link linkend="PatchKernel">as
described above</link> rather than using the mppe package that is
available with the client. My /etc/ppp/options file is mostly unchanged
from what came with the client (see below).</para>
<para>The key elements of this setup are as follows:</para>
<orderedlist>
<listitem>
<para>Define a zone for the remote network accessed via PPTP.</para>
</listitem>
<listitem>
<para>Associate that zone with a ppp interface.</para>
</listitem>
<listitem>
<para>Define rules for PPTP traffic to/from the firewall.</para>
</listitem>
<listitem>
<para>Define rules for traffic two and from the remote zone.</para>
</listitem>
</orderedlist>
<para>Here are examples from my setup:</para>
<table>
<title>/etc/shorewall/zones</title>
<tgroup cols="3">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">DISPLAY</entry>
<entry align="center">COMMENTS</entry>
</row>
</thead>
<tbody>
<row>
<entry>cpq</entry>
<entry>Compaq</entry>
<entry>Compaq Intranet</entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/interfaces</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">INTERFACE</entry>
<entry align="center">BROADCAST</entry>
<entry align="center">OPTIONS</entry>
</row>
</thead>
<tbody>
<row>
<entry>-</entry>
<entry>ppp+</entry>
<entry></entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/hosts</title>
<tgroup cols="3">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">HOST(S)</entry>
<entry align="center">OPTIONS</entry>
</row>
</thead>
<tbody>
<row>
<entry>-</entry>
<entry>ppp+:!192.168.1.0/24</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/rules (For Shorewall versions up to and including
1.3.9b)</title>
<tgroup cols="7">
<thead>
<row>
<entry align="center">ACTION</entry>
<entry align="center">SOURCE</entry>
<entry align="center">DEST</entry>
<entry align="center">PROTO</entry>
<entry align="center">DEST PORT(S)</entry>
<entry align="center">SOURCE PORT(S)</entry>
<entry align="center">ORIGINAL DEST</entry>
</row>
</thead>
<tbody>
<row>
<entry>ACCEPT</entry>
<entry>fw</entry>
<entry>net</entry>
<entry>tcp</entry>
<entry>1723</entry>
<entry></entry>
<entry></entry>
</row>
<row>
<entry>ACCEPT</entry>
<entry>fw</entry>
<entry>net</entry>
<entry>47</entry>
<entry>-</entry>
<entry></entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>/etc/shorewall/tunnels (For Shorewall versions 1.3.10 and later)</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">TYPE</entry>
<entry align="center">ZONE</entry>
<entry align="center">GATEWAY</entry>
<entry align="center">GATEWAY ZONE</entry>
</row>
</thead>
<tbody>
<row>
<entry>pptpclient</entry>
<entry>net</entry>
<entry>0.0.0.0/0</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<para>I use the combination of interface and hosts file to define the
<quote>cpq</quote> zone because I also run a PPTP server on my firewall
(see above). Using this technique allows me to distinguish clients of my
own PPTP server from arbitrary hosts at Compaq; I assign addresses in
192.168.1.0/24 to my PPTP clients and Compaq doesn&#39;t use that RFC1918
Class C subnet.</para>
<para>I use this script in /etc/init.d to control the client. The reason
that I disable ECN when connecting is that the Compaq tunnel servers
don&#39;t do ECN yet and reject the initial TCP connection request if I
enable ECN :-(</para>
<programlisting>#!/bin/sh
#
# /etc/rc.d/init.d/pptp
#
# chkconfig: 5 60 85
# description: PPTP Link Control
#
NAME=&#34;Tandem&#34;
ADDRESS=tunnel-tandem.compaq.com
USER=&#39;Tandem\tommy&#39;
ECN=0
DEBUG=
start_pptp() {
echo $ECN &#62; /proc/sys/net/ipv4/tcp_ecn
if /usr/sbin/pptp $ADDRESS user $USER noauth $DEBUG; then
touch /var/lock/subsys/pptp
echo &#34;PPTP Connection to $NAME Started&#34;
fi
}
stop_pptp() {
if killall /usr/sbin/pptp 2&#62; /dev/null; then
echo &#34;Stopped pptp&#34;
else
rm -f /var/run/pptp/*
fi
# if killall pppd; then
# echo &#34;Stopped pppd&#34;
# fi
rm -f /var/lock/subsys/pptp
echo 1 &#62; /proc/sys/net/ipv4/tcp_ecn
}
case &#34;$1&#34; in
start)
echo &#34;Starting PPTP Connection to ${NAME}...&#34;
start_pptp
;;
stop)
echo &#34;Stopping $NAME PPTP Connection...&#34;
stop_pptp
;;
restart)
echo &#34;Restarting $NAME PPTP Connection...&#34;
stop_pptp
start_pptp
;;
status)
ifconfig
;;
*)
echo &#34;Usage: $0 {start|stop|restart|status}&#34;
;;
esac</programlisting>
<para>Here&#39;s my /etc/ppp/options file:</para>
<programlisting>#
# Identify this connection
#
ipparam Compaq
#
# Lock the port
#
lock
#
# We don&#39;t need the tunnel server to authenticate itself
#
noauth
+chap
+chapms
+chapms-v2
multilink
mrru 1614
#
# Turn off transmission protocols we know won&#39;t be used
#
nobsdcomp
nodeflate
#
# We want MPPE
#
mppe-128
mppe-stateless
#
# We want a sane mtu/mru
#
mtu 1000
mru 1000
#
# Time this thing out of it goes poof
#
lcp-echo-failure 10
lcp-echo-interval 10</programlisting>
<para>My /etc/ppp/ip-up.local file sets up the routes that I need to route
Compaq traffic through the PPTP tunnel:</para>
<programlisting>#/bin/sh
case $6 in
Compaq)
route add -net 16.0.0.0 netmask 255.0.0.0 gw $5 $1
route add -net 130.252.0.0 netmask 255.255.0.0 gw $5 $1
route add -net 131.124.0.0 netmask 255.255.0.0 gw $5 $1
...
;;
esac</programlisting>
<para>Finally, I run the following script every five minutes under crond
to restart the tunnel if it fails:</para>
<programlisting>#!/bin/sh
restart_pptp() {
/sbin/service pptp stop
sleep 10
if /sbin/service pptp start; then
/usr/bin/logger &#34;PPTP Restarted&#34;
fi
}
if [ -n &#34;`ps ax | grep /usr/sbin/pptp | grep -v grep`&#34; ]; then
exit 0
fi
echo &#34;Attempting to restart PPTP&#34;
restart_pptp &#62; /dev/null 2&#62;&#38;1 &#38;</programlisting>
<para><ulink url="ftp://ftp.shorewall.net/pub/shorewall/misc/Vonau">Here&#39;s
a scriptand corresponding ip-up.local</ulink> from Jerry Vonau
<email>jvonau@home.com</email> that controls two PPTP connections.</para>
</section>
<section id="PPTP_ADSL">
<title>PPTP Client running on your Firewall with PPTP Server in an ADSL
Modem</title>
<para>Some ADSL systems in Europe (most notably in Austria) feature a PPTP
server built into an ADSL <quote>Modem</quote>. In this setup, an ethernet
interface is dedicated to supporting the PPTP tunnel between the firewall
and the <quote>Modem</quote> while the actual internet access is through
PPTP (interface ppp0). If you have this type of setup, you need to modify
the sample configuration that you downloaded as described in this section.
<emphasis role="bold">These changes are in addition to those described in
the <ulink url="shorewall_quickstart_guide.htm">QuickStart Guides</ulink>.</emphasis></para>
<para>Lets assume the following:</para>
<itemizedlist>
<listitem>
<para>ADSL Modem connected through eth0</para>
</listitem>
<listitem>
<para>Modem IP address = 192.168.1.1</para>
</listitem>
<listitem>
<para>eth0 IP address = 192.168.1.2</para>
</listitem>
</itemizedlist>
<para>The changes you need to make are as follows:</para>
<orderedlist>
<listitem>
<para>Add this entry to /etc/shorewall/zones:</para>
<table>
<title>/etc/shorewall/zones</title>
<tgroup cols="3">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">DISPLAY</entry>
<entry align="center">COMMENTS</entry>
</row>
</thead>
<tbody>
<row>
<entry>modem</entry>
<entry>Modem</entry>
<entry>ADSL Modem</entry>
</row>
</tbody>
</tgroup>
</table>
<para>That entry defines a new zone called <quote>modem</quote> which
will contain only your ADSL modem.</para>
</listitem>
<listitem>
<para>Add the following entry to /etc/shorewall/interfaces:</para>
<table>
<title>/etc/shorewall/interfaces</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">ZONE</entry>
<entry align="center">INTERFACE</entry>
<entry align="center">BROADCAST</entry>
<entry align="center">OPTIONS</entry>
</row>
</thead>
<tbody>
<row>
<entry>modem</entry>
<entry>eth0</entry>
<entry>192.168.1.255</entry>
<entry>dhcp</entry>
</row>
</tbody>
</tgroup>
</table>
<para>You will of course modify the <quote>net</quote> entry in
/etc/shorewall/interfaces to specify <quote>ppp0</quote> as the
interface as described in the QuickStart Guide corresponding to your
setup.</para>
</listitem>
<listitem>
<para>Add the following to /etc/shorewall/tunnels:</para>
<table>
<title>/etc/shorewall/tunnels</title>
<tgroup cols="4">
<thead>
<row>
<entry align="center">TYPE</entry>
<entry align="center">ZONE</entry>
<entry align="center">GATEWAY</entry>
<entry align="center">GATEWAY ZONE</entry>
</row>
</thead>
<tbody>
<row>
<entry>pptpclient</entry>
<entry>modem</entry>
<entry>192.168.1.1</entry>
<entry></entry>
</row>
</tbody>
</tgroup>
</table>
<para>That entry allows a PPTP tunnel to be established between your
Shorewall system and the PPTP server in the modem.</para>
</listitem>
</orderedlist>
</section>
</article>