mirror of
https://github.com/KusakabeShi/EtherGuard-VPN.git
synced 2024-11-25 16:53:19 +01:00
144 lines
5.4 KiB
Markdown
144 lines
5.4 KiB
Markdown
# Etherguard
|
||
|
||
[中文版README](README_zh.md)
|
||
|
||
A Full Mesh Layer2 VPN based on wireguard-go
|
||
|
||
OSPF can find best route based on it's cost.
|
||
But sometimes the lentancy are different in the packet goes and back.
|
||
I'am thinking, is it possible to find the best route based on the **single-way latency**?
|
||
For example, I have two routes A and B at node N1, both of them can reach my node N2. A goes fast, but B backs fast.
|
||
My VPN can automatically send packet through route A at node N1, and the packet backsfrom route B.
|
||
|
||
Here is the solution. This VPN `Etherguard` can collect all the single-way lentancy from all nodes, and calculate the best route using [Floyd–Warshall algorithm](https://en.wikipedia.org/wiki/Floyd%E2%80%93Warshall_algorithm).
|
||
|
||
## Usage
|
||
|
||
```bash
|
||
Usage of ./etherguard-go:
|
||
-config string
|
||
Config path.
|
||
-example
|
||
Print example config
|
||
-help
|
||
Show this help
|
||
-mode string
|
||
Running mode. [super|edge|solve]
|
||
-no-uapi
|
||
Do not use UAPI
|
||
-version
|
||
Show version
|
||
```
|
||
|
||
## Mode
|
||
|
||
1. Static Mode: Similar to origional wireguard. [Introduction](example_config/static_mode/README.md).
|
||
2. Super Mode: Inspired by[n2n](https://github.com/ntop/n2n). [Introduction](example_config/super_mode/README.md).
|
||
3. P2P Mode: Inspired by[tinc](https://github.com/gsliepen/tinc). [Introduction](example_config/p2p_mode/README.md).
|
||
|
||
## Common Config Paramater
|
||
|
||
### Edge Config
|
||
|
||
1. `interface`
|
||
1. `itype`: Interface type.
|
||
1. `dummy`: Dymmy interface, drop any packet received. You need this if you want to setup it as a relay node.
|
||
2. `stdio`: Wrtie to stdout，read from stdin.
|
||
Paramaters: `macaddrprefix`,`l2headermode`
|
||
3. `udpsock`: Write to an udp socket, and read from an net assress.
|
||
Paramaters: `macaddrprefix`,`recvaddr`,`sendaddr`
|
||
4. `vpp`: Integrate to VPP by libmemif.
|
||
Paramaters: `name`,`vppifaceid`,`vppbridgeid`,`macaddrprefix`,`mtu`
|
||
5. `tap`: Read/Write to tap device from linux.
|
||
Paramaters: `name`,`macaddrprefix`,`vppifaceid`,`mtu`
|
||
2. `name` : Device name
|
||
3. `vppifaceid`: Interface ID。Muse be unique in same VPP runtime
|
||
4. `vppbridgeid`: VPP Bridge ID. Fill 0 if you don't use it.
|
||
5. `macaddrprefix`: Mac address Prefix.
|
||
Real Mac address=[Prefix]:[NodeID].
|
||
If you fill full mac address here, NodeID will be ignored.
|
||
6. `recvaddr`: Listen address for `udpsock` mode
|
||
7. `sendaddr`: Packet send address for `udpsock` mode
|
||
8. `l2headermode`: For debug usage, `stdio` and `udpsock` mode only
|
||
1. `nochg`: Do not change anything.
|
||
2. `kbdbg`: Keyboard debug mode.
|
||
Let me construct Layer 2 header by ascii character only.
|
||
So that I can track the packet flow with `loglevel` option.
|
||
3. `noL2`: Remove all Layer 2 header
|
||
2. `nodeid`: NodeID. Must be unique in the whole Etherguard network.
|
||
3. `nodename`: Node Name.
|
||
4. `privkey`: Private key. Same spec as wireguard.
|
||
5. `listenport`: UDP lesten port
|
||
6. `loglevel`: Log Level
|
||
1. `loglevel`: `debug`,`error`,`slient` for wirefuard logger.
|
||
2. `logtransit`: Log packets that neither the source or distenation is self.
|
||
3. `logcontrol`: Log for all Control Message.
|
||
4. `lognormal`: Log packets that either the source or distenation is self.
|
||
5. `logntp`: NTP related logs.
|
||
7. `dynamicroute`: Log for dynamic route.
|
||
1. `sendpinginterval`: Send `Ping` interval
|
||
2. `dupchecktimeout`: Duplication chack timeout.
|
||
3. `conntimeout`: Connection timeout.
|
||
4. `savenewpeers`: Save peer info to local file.
|
||
5. `supernode`: See [Super Mode](example_config/super_mode/README_zh.md)
|
||
6. `p2p` See [P2P Mode](example_config/p2p_mode/README_zh.md)
|
||
7. `ntpconfig`: NTP related settings
|
||
1. `usentp`: USE NTP or not.
|
||
2. `maxserveruse`: How many NTP servers should we use at once.
|
||
First time we will measure lentancy for all NTP server, next time it will use only fastest server.
|
||
3. `synctimeinterval`: NTP sync interval.
|
||
4. `ntptimeout`: NTP timeout
|
||
5. `servers`: NTP server list
|
||
8. `nexthoptable`: Nexthop table。Only static mode use it. See [Static Mㄍㄟ](example_config/super_mode/README_zh.md)
|
||
9. `resetconninterval`: Reset the endpoint for peers. You may need this if that peer use DDNS.
|
||
10. `peers`: Peer info.
|
||
1. `nodeid`: Node ID.
|
||
2. `pubkey`: Public key.
|
||
3. `pskey`: Preshared key. Not implement yet.
|
||
4. `endpoint`: Peer enddpoint. Will be overwrite if the peer roaming unless static=true.
|
||
5. `static`: Do not overwrite by roaming and reset the connection every `resetconninterval` seconds.
|
||
|
||
### Super config
|
||
|
||
See [Super Mode](example_config/super_mode/README.md).
|
||
|
||
## Build
|
||
|
||
### No-vpp version
|
||
|
||
Build Etherguard.
|
||
|
||
Install Go 1.16
|
||
|
||
```bash
|
||
add-apt-repository ppa:longsleep/golang-backports
|
||
apt-get -y update
|
||
apt-install -y wireguard-tools golang-go build-essential
|
||
```
|
||
|
||
Build
|
||
|
||
```bash
|
||
make
|
||
```
|
||
|
||
### VPP version
|
||
|
||
Build Etherguard with VPP integrated.
|
||
You need libmemif.so installed to run this version.
|
||
|
||
Install VPP and libemif
|
||
|
||
```bash
|
||
echo "deb [trusted=yes] https://packagecloud.io/fdio/release/ubuntu focal main" > /etc/apt/sources.list.d/99fd.io.list
|
||
curl -L https://packagecloud.io/fdio/release/gpgkey | sudo apt-key add -
|
||
apt-get -y update
|
||
apt-get install -y vpp vpp-plugin-core python3-vpp-api vpp-dbg vpp-dev libmemif libmemif-dev
|
||
```
|
||
|
||
Build
|
||
|
||
```bash
|
||
make vpp
|
||
```
|