mirror of
https://github.com/KusakabeShi/EtherGuard-VPN.git
synced 2024-12-03 04:33:09 +01:00
50 lines
1.8 KiB
Markdown
50 lines
1.8 KiB
Markdown
# Etherguard
|
||
[English](#) | [中文](README_zh.md)
|
||
|
||
## P2P Mode
|
||
|
||
P2P Mode is inspired by [tinc](https://github.com/gsliepen/tinc), There are no SuperNode. All EdgeNode will exchange information each other.
|
||
EdgeNodes are keep trying to connect each other, and notify all other peers success or not.
|
||
All edges runs [Floyd-Warshall Algorithm](https://en.wikipedia.org/wiki/Floyd–Warshall_algorithm) locally and find the best route by it self.
|
||
**Not recommend to use this mode in production environment, not test yet.**
|
||
|
||
## Quick Start
|
||
First, edit the `gensp2p.yaml`
|
||
|
||
```yaml
|
||
Config output dir: /tmp/eg_gen_static # Profile output location
|
||
ConfigTemplate for edge node: "" # Profile Template
|
||
Network name: "EgNet"
|
||
Edge Node:
|
||
MacAddress prefix: "" # Leave blank to generate randomly
|
||
IPv4 range: 192.168.76.0/24 # By the way, the IP part can be omitted.
|
||
IPv6 range: fd95:71cb:a3df:e586::/64 # The only purpose of this field is to call the ip command after startup to add an ip to the tap interface
|
||
IPv6 LL range: fe80::a3df:0/112 #
|
||
Edge Nodes: # Node related settings
|
||
1:
|
||
Endpoint(optional): 127.0.0.1:3001
|
||
2:
|
||
Endpoint(optional): 127.0.0.1:3002
|
||
3:
|
||
Endpoint(optional): 127.0.0.1:3003
|
||
4:
|
||
Endpoint(optional): 127.0.0.1:3004
|
||
5:
|
||
Endpoint(optional): 127.0.0.1:3005
|
||
6:
|
||
Endpoint(optional): 127.0.0.1:3006
|
||
```
|
||
|
||
Run this, it will generate the required configuration file
|
||
```
|
||
./etherguard-go -mode gencfg -cfgmode p2p -config example_config/p2p_mode/gensp2p.yaml
|
||
```
|
||
|
||
Deploy these configuration files to the corresponding nodes, and then execute
|
||
```
|
||
./etherguard-go -config [config path] -mode edge
|
||
```
|
||
|
||
you can turn off unnecessary logs to increase performance after it works.
|
||
|
||
[WIP] |