* Add vertical PDUs
* Add and fix MH15 series PDUs
* Add Tripp-Lite 12 series horizontal PDUs
* Fix final line blankness
* Fix images status
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Add Tripp-Lite-B064-032-01-IPG
* Update Tripp-Lite-B064-016-02-IPG based on changes made for Tripp-Lite-B064-032-01-IPG.
* Add B072-032-IP2
* Set correct network port names for B064 series.
* Update Tripp-Lite-B064-032-01-IPG.yaml
adjust network port speeds
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>
* Adding first revision of the VGA test cases
* Second revision with less repetative code
* Handling case where vga has a number in the naming
* the great VGA purge!
* broke component validation out to its own function. Adding logic for validating device power input.
* Added console-port poe true for adapters. Updating devices to add proper power sources.
* Adding switches to allow for tests to properly determine POE status.
* Fixing files with missing power definitions.
* breaking out tests for easier usage
* refactoring codebase
* Added verification for properly formatted slug and fixed definitions that were incorrect
* Adding new test case to ensure the file name matches either the slug or the part_number
* fixed file names to match proper formatting
* Migrated device slugs for 3com
* Migrated device slugs for A10
* migrating manufacturers slugs
* Migrated device slugs for AVM
* Migrated device slugs for Avocent
* Migrated device slugs for Brocade
* Migrated device slugs for Calix
* Migrated device slugs for Checkpoint
* Migrated device slugs for more Checkpoint files
* Migrated device slugs for Ciena
* Migrated device slugs for Citrix
* Migrated device slugs for Colable
* Migrated device slugs for Corning
* Migrated device slugs for CryptoPro
* Migrated device slugs for CyberPower
* Migrated device slugs for Datacom
* Migrating slug definition for manufacturer Deciso
* Migrating slug definition for manufacturer Dell
* Migrating slug definition for manufacturer Extreme Networks
* Migrating slug definition for manufacturer F5
* Migrating slug definition for manufacturer Fortinet
* Migrating slug definition for manufacturer FS
* Migrating slug definition for manufacturer Generic
* Migrating slug definition for manufacturer Huawei
* Migrating slug definition for manufacturer LANCOM
* Migrating slug definition for manufacturer Lenovo
* Migrating slug definition for manufacturer Mikrotik
* Migrating slug definition for manufacturer Opengear
* Migrating slug definition for manufacturer Palo Alto
* Migrating slug definition for manufacturer Panduit
* Migrating slug definition for manufacturer QNAP
* Migrating slug definition for manufacturer Rockwell Automation
* Migrating slug definition for manufacturer Ubiquiti
* Migrating slug definition for manufacturer Yamaha
* Migrating slug definition for manufacturer WTI
* Migrating slug definition for manufacturers
* Migrating slug definition for manufacturer Rohde & Schwarz
* fixing double slugs and file names
* fixing slug names to match proper format
* fixing slug names to match proper format
* fixing slugs to match proper format
* fixing slugs to match proper format for Nokia. Also fixed file names for elevation images.
* fixing slugs to match proper format
* fixing slugs to match proper format
* fixing slugs to match proper format for manufacturer Cisco
* fixing slugs to match proper format for manufacturer MikroTik
* fixing slugs to match proper format for manufacturer Ubiquiti
* adding sloppy script used to migrate files
* Create 9PX5KIRTN.yaml
Just created this one.
In realety the eth0 should be a module which can be fitted in but this is just right for the most applications i think.
* Update 9PX5KIRTN.yaml
Made changes nameing power outlets. Also set "power_port" for the outlets. Added Battery connector and detection interfaces.
* Create 9PXEBM180.yaml
* Create ESWB05.yaml
* Create ESWB22.yaml
* Changed in-/out-put to hardwired
* Create CBL2OUT32.yaml
* Update 9PX5KIRTN.yaml
Fixes to formatting
* Update 9PX5KIRTN.yaml
Removed un-needed definitions
* Update 9PXEBM180.yaml
Removed un-needed definitions
Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com>
* device and module types for 9PX, battery module, network card, and sensor
* remove 'null' power allocation from 9PX3000iRT2U
* turn environmental probe into module, add corresponding module slots to UPS
* remove leftover definitions from converting device to module for EMPDT1H1C2