* Add maximum_draw, notes about combo ports for PowerConnect 6224, 6248
* Add PowerConnect 62xxP, 6224F
* Add PowerSwitch N15xx, N15xxP
* Add PowerSwitch N2024, N20xxP
* Add images for PowerSwitch N2048
* Add PowerSwitch N4032, N4032F and two uplink modules
* Set airflow for PowerSwitch N1500, N2000 series
* Set front_image, rear_image for PowerSwitch N2048
* Add front image for Dell PowerSwitch N1548
* Update PowerSwitch-N4032.yaml
Convert power ports to PSUs as they are hot swappable
* Update PowerSwitch-N4032F.yaml
Convert power ports to PSUs as they are hot swappable
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Add SMX3000RMLV2U
* Add images
* Fix file name
* Update SMX3000RMLV2U.yaml
Network interface is part of the management card not the chassis
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Add QNAP TS-{4,8}32PXU-RP, TS-432PXU with images
* Remove disk bays from TS-{4,8}32PXU-RP, TS-432PXU
* Add weight, weight_unit for TS-{4,8}32PXU-RP, TS-432PXU
* Replace power-ports with module-bays for removable PSUs in -RP models.
Add the Delta DPS-250AB-81 A PSU that was supplied in our units.
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Add Meinberg Lantime M300
* yamllint fixes
* Fixing issues raised by review
* Add weight
* Add max power consumption to PSU
* rename the image to be found
* Update elevation image, removed second psu to corespond with elevation image
* Moved the AP yaml files to the correct directory. They should have been in device-types/APC and not the root directory
* Added new device types
* Add files via upload
Added new device types
* Add files via upload
Added new device types
* Rename Cisco SMA M395.yml to cisco-sma-m395.yaml
renamed to slug.yaml
* Rename cisco-sma-m395.yaml to SMA-M395.yaml
Convention in the repo is model.yaml not slug.yaml. See any of the hundreds of other cisco models for reference. I have renamed it to <model>.yml accordingly.
* Updated the mgmt interface type to sfp from sfp28
* Added front and rear images for f5 big ip i7800
* Renamed from dash to period before front and back to match convention.
* Added images for cisco-n9k-c93360yc-fx2
* Rename Cisco SMA M395.yml to SMA-M395.yml
* Delete device-types/Cisco/SMA-M395.yml
deleted the file with the .yml extension since I had renamed it to .yaml
* Rename Cisco WSA S195.yml to WSA-S195.yaml
---------
Co-authored-by: Joseph Ishak <jishak@paciolan.com>
Co-authored-by: Ryan Merolle <ryanmerolle@users.noreply.github.com>
* Added Images for Juniper SRX240H2 and SRX240H2-POE
* Update SRX240H2-POE.yaml
Interface properties and datasheet link were updated, and module bays were added.
* Update SRX240H2.yaml
The datasheet link was updated and module-bays were added.
* Update SRX240H2-POE.yaml
The PDF link, weight, power draw, and interface properties have been updated.
* Update SRX240H2.yaml
Interface properties, PDF link, weight, device pictures, and power draw updated.
* Fix existing switches
* Add the rest of the X440-G2 switches
* Add images for X440-G2 switches
* Fix PoE enum
* Fix image names from 'back' to 'rear'
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Added Dell PowerSwitch N3248P-ON and S4128F-ON
* Added Sophos XGS 126 and 136
* Added Sophos AP6-420E, APX320 and APX530
* Added Fritzbox 7510
* fixed duplicate device type naming
* Removed non-existing LAN Ports
* Moved Power-Ports to seperate module, Add type and mode to POE ports
* Add module-type definition and image for Dell 1150W hot swap psu
* [DELL S4128F-ON] changed power-ports to module-bay and added module-type for psu
* added missing newlines
* Catalyst 3560-CX-12PC-S: Set is_powered
* Catalyst 3560-CX-12PC-S: Add front and rear image
* Fixed issues
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
* Add Tripp-Lite-B064-032-01-IPG
* Update Tripp-Lite-B064-016-02-IPG based on changes made for Tripp-Lite-B064-032-01-IPG.
* Add B072-032-IP2
* Set correct network port names for B064 series.
* Update Tripp-Lite-B064-032-01-IPG.yaml
adjust network port speeds
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>
* Add Bachmann 6x Power Socket
* Update Port Names
* Fix Spaces Error
* Fix Part Number not String
* Add Rittal DK 7240.210
* Add Update Model Name
* Add Update Model Name
* Add Update Comment
* Fix Slug
* Fix Filename
* Add Brennenstuhl 1156057128
* Fix model name
* Fix model name
* Add missing values
* Add missing values
* Add missing Values
---------
Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
* add fg 101e with elevations and 100E rear
* Add FortiGate 310B
* Correct 310b image names
* Update FG-101E.yaml
added some extra data
* Update FG-100E.yaml
added rear image
* Update FG-310B.yaml
added extra data
* Rename fortinet-fg-310b.back.png to fortinet-fg-310b.rear.png
---------
Co-authored-by: Harry
* Add huawei-s6730-s24x6q, include device images
* Changed part_number to be equal to the model name
* Update S6730-S24X6Q.yaml
Added a few extra details
* Update S6730-S24X6Q.yaml
added line for images
* rename images
---------
Co-authored-by: Harry
* Update F5 Big-IP i2000 series
Add elevation images and PS Module for F5 Big-IP i2000 series
* Updtae comments to use markdown for links.
* Rename PWR_0334.yaml to PWR-0334.yaml
* Adding N8560-48BC device type
* Adding N8560-48BC device type
* Update N8560-48BC.yaml
Moved Power ports to module bays
---------
Co-authored-by: Jean-Sébastien Frerot <js.frerot@imeka.ca>
Co-authored-by: Harry
