fknorn
230c2d807d
Changed filename, slug and part_number which had a typo - and added images and additional data. ( #2547 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
2024-12-08 11:43:32 +00:00
David Siebörger
79066c0e99
Add Dell 6200, N1500/2000/4000 switches ( #2510 )
...
* Add maximum_draw, notes about combo ports for PowerConnect 6224, 6248
* Add PowerConnect 62xxP, 6224F
* Add PowerSwitch N15xx, N15xxP
* Add PowerSwitch N2024, N20xxP
* Add images for PowerSwitch N2048
* Add PowerSwitch N4032, N4032F and two uplink modules
* Set airflow for PowerSwitch N1500, N2000 series
* Set front_image, rear_image for PowerSwitch N2048
* Add front image for Dell PowerSwitch N1548
* Update PowerSwitch-N4032.yaml
Convert power ports to PSUs as they are hot swappable
* Update PowerSwitch-N4032F.yaml
Convert power ports to PSUs as they are hot swappable
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-28 08:34:56 +00:00
Aaron Axvig
762e0708e0
Add SMX3000RMLV2U ( #2532 )
...
* Add SMX3000RMLV2U
* Add images
* Fix file name
* Update SMX3000RMLV2U.yaml
Network interface is part of the management card not the chassis
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-28 08:06:07 +00:00
raven
317d64ed40
NetApp 2700 Series ( #2531 )
...
* X5726A
* X5720A
* X-5731A-00
* remove slugs from modules
* DE460C
* FAS2720
* FAS2750
* update FAS2700 Controller
* add airflow to DE460C
* add positions to PSU bays
* add positions to DE460C
* Use colons instead of dashes to improve readability
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
2024-11-28 07:59:46 +00:00
joshuacarmack
4d7c2fa035
Added Ubiquiti UNVR-Pro ( #2526 )
...
* Create UNVR-Pro
* Add files via upload
* Rename UNVR-Pro to UNVR-Pro.yaml
* Update UNVR-Pro.yaml
Fixed power ports
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-26 21:33:04 +00:00
David Siebörger
c68ae29c1c
Add QNAP TS-x32PXU/-RP ( #2521 )
...
* Add QNAP TS-{4,8}32PXU-RP, TS-432PXU with images
* Remove disk bays from TS-{4,8}32PXU-RP, TS-432PXU
* Add weight, weight_unit for TS-{4,8}32PXU-RP, TS-432PXU
* Replace power-ports with module-bays for removable PSUs in -RP models.
Add the Delta DPS-250AB-81 A PSU that was supplied in our units.
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-22 08:59:41 +00:00
papasan14
166628277f
Upload front image opengear CM7132 ( #2518 )
...
* Adding FG 100F front elevation image
* Update FG-100F.yaml
Adding front image for FG 100F
* Add files via upload
* Rename opengear-cm7132-2-dac.png to opengear-cm7132-2-dac.front..png
Fixed file naming
* Rename opengear-cm7132-2-dac.front..png to opengear-cm7132-2-dac.front.png
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-21 22:05:58 +00:00
Vladimir Vitkov
b5bcfc5198
Add Meinberg Lantime M300 ( #2475 )
...
* Add Meinberg Lantime M300
* yamllint fixes
* Fixing issues raised by review
* Add weight
* Add max power consumption to PSU
* rename the image to be found
* Update elevation image, removed second psu to corespond with elevation image
2024-11-19 10:15:47 +00:00
Aaron Axvig
dfd0045a2f
Add Extreme X620 switch series with images and PSUs ( #2494 )
...
* Create X620-16x.yaml
* Create X620-10x.yaml
* Create X620-16t.yaml
* Create X620-16p.yaml
* Create X620-8t-2x.yaml
* Fix X620-10x watts and weight.yaml
* Add Extreme X620 images
* Create Summit-300W-AC-FB.yaml
* Create Summit-300W-AC-BF
* Create Summit-300W-DC-FB
* Create Summit-300W-DC-BF.yaml
* Rename Summit-300W-AC-BF to Summit-300W-AC-BF.yaml
* Update and rename Summit-300W-DC-FB to Summit-300W-DC-FB.yaml
* Update Summit-300W-AC-FB.yaml
* Create Summit-750W-AC-FB
* Update Summit-300W-DC-BF.yaml
* Update Summit-300W-DC-FB.yaml
* Update Summit-300W-AC-FB.yaml
* Update Summit-300W-AC-BF.yaml
* Fix part_numbers to be strings
* Add .yaml extension
* Remove unnecessary quotes
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-15 11:36:50 +00:00
raven
98f026ba63
Digi PortServer TS 8/16 ( #2498 )
...
* Add TS8
* add TS16
* Modify image
* fix model name
* fix slug
* rename image after changing slug
* fix yaml file name after changing slug
* rename image
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-14 16:52:57 +00:00
Aaron Axvig
b49c70f50b
Add Extreme X590 switches ( #2493 )
...
* Create X590-24x-1q-2c.yaml
* Create x590-24t-1q-2c.yaml
* Add X590 images
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-12 21:20:51 +00:00
Joseph Ishak
7dd7cc0fc1
Additional cisco,f5 device types ( #2482 )
...
* Moved the AP yaml files to the correct directory. They should have been in device-types/APC and not the root directory
* Added new device types
* Add files via upload
Added new device types
* Add files via upload
Added new device types
* Rename Cisco SMA M395.yml to cisco-sma-m395.yaml
renamed to slug.yaml
* Rename cisco-sma-m395.yaml to SMA-M395.yaml
Convention in the repo is model.yaml not slug.yaml. See any of the hundreds of other cisco models for reference. I have renamed it to <model>.yml accordingly.
* Updated the mgmt interface type to sfp from sfp28
* Added front and rear images for f5 big ip i7800
* Renamed from dash to period before front and back to match convention.
* Added images for cisco-n9k-c93360yc-fx2
* Rename Cisco SMA M395.yml to SMA-M395.yml
* Delete device-types/Cisco/SMA-M395.yml
deleted the file with the .yml extension since I had renamed it to .yaml
* Rename Cisco WSA S195.yml to WSA-S195.yaml
---------
Co-authored-by: Joseph Ishak <jishak@paciolan.com>
Co-authored-by: Ryan Merolle <ryanmerolle@users.noreply.github.com>
2024-11-12 21:16:06 +00:00
cieska
1de8cde617
Juniper SRX240H2, SRX240H2-POE wieght, interface properties, pictures, power draw, documentation link updated. ( #2492 )
...
* Added Images for Juniper SRX240H2 and SRX240H2-POE
* Update SRX240H2-POE.yaml
Interface properties and datasheet link were updated, and module bays were added.
* Update SRX240H2.yaml
The datasheet link was updated and module-bays were added.
* Update SRX240H2-POE.yaml
The PDF link, weight, power draw, and interface properties have been updated.
* Update SRX240H2.yaml
Interface properties, PDF link, weight, device pictures, and power draw updated.
2024-11-11 11:33:19 +00:00
Aaron Axvig
f3bff60ed1
Add other Extreme X440-G2 switches with images ( #2488 )
...
* Fix existing switches
* Add the rest of the X440-G2 switches
* Add images for X440-G2 switches
* Fix PoE enum
* Fix image names from 'back' to 'rear'
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-09 20:46:18 +00:00
raven
ee6ef74d01
C1200-16T-2G ( #2474 )
...
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
2024-11-08 10:36:43 +00:00
raven
75787117fb
cisco-sg350-52 ( #2471 )
...
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
2024-11-06 16:00:46 +00:00
fknorn
d0a72ce897
Added Cisco UCS C240 M4SX (all checks passed) ( #2470 )
...
* Added Cisco UCS C240 M4SX
* Update UCSC-C240-M4SX.yaml
Fixed pre commit check
---------
Co-authored-by: fknorn <fknorn@cisco.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-06 11:41:12 +00:00
raven
8e169916bb
Cisco SG300 and SG500 improvements ( #2469 )
...
* sg300-28
* SG300-52
* SG500X-48
* SX550X-16FT
* add weight to SG300-28
* fix file naming
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-06 11:36:31 +00:00
raven
0040bcd303
Lantronix ETS16PR and ETS32PR ( #2464 )
...
* add ETS16PR
* add ETS32PR
* add weight
* Add missing Serial 10 port
* also add maximum_draw
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-06 11:14:34 +00:00
VentByte
5c1568bb9d
Added new Device Types for AVM, Dell and Sophos ( #2336 )
...
* Added Dell PowerSwitch N3248P-ON and S4128F-ON
* Added Sophos XGS 126 and 136
* Added Sophos AP6-420E, APX320 and APX530
* Added Fritzbox 7510
* fixed duplicate device type naming
* Removed non-existing LAN Ports
* Moved Power-Ports to seperate module, Add type and mode to POE ports
* Add module-type definition and image for Dell 1150W hot swap psu
* [DELL S4128F-ON] changed power-ports to module-bay and added module-type for psu
* added missing newlines
2024-11-06 09:00:29 +00:00
raven
1bf52d93ea
Add various CBS250 Switches ( #2465 )
...
* add CBS250-48T-4G
* fix 1000base-x-sfp
* CBS250-16T-2G
* correct console ports
* fix airflow
* fix 1000base-x-sfp
* CBS250-24T-4X
* Nicer comment for CBS250 series datasheet
* CBS250-24T-4G
* CBS250-24PP-4G
* CBS250-48T-4X
* add mini-b console ports for larger devices.
* CBS250-8T-E-2G
* CBS250-8FP-E-2G
* fix TenGigabitEthernet interface naming
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-05 21:39:04 +00:00
fknorn
812872f3eb
Added Cisco UCS-C460-M4 Server and images ( #2458 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-05 11:19:23 +00:00
fknorn
a6ba00171d
Added UCS server and images ( #2457 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-05 11:03:06 +00:00
fknorn
40f3f02067
Added images plus weight and datasheet link ( #2453 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-04 21:33:42 +00:00
raven
36e7dc73b5
add Supermicro 5018D-FN8T and 5019D-FN8TP ( #2441 )
...
* add SuperServer 5018D-FN8T
* transform slug to lowercase
* add SYS-5019D-FN8TP
* add comments with links and fix interface type
* remove console ports
* add missing pci slots
* add elevation images
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-03 13:17:50 +00:00
ch
28f90d9f62
Add Catalyst 3560-CX-12PC-S Front and Rear image ( #2132 )
...
* Catalyst 3560-CX-12PC-S: Set is_powered
* Catalyst 3560-CX-12PC-S: Add front and rear image
* Fixed issues
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-11-03 12:40:15 +00:00
fknorn
b237817df7
Added images and adjusted device-types ( #2450 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
2024-11-01 15:05:53 +00:00
k-masters
b903a48208
Add sophos xgs firewalls ( #2442 )
...
* Add Sophos XGS device types
* Add several Sophos XGS elevation images
* Add elevation image notation
---------
Co-authored-by: Kaleb Masters <kmasters@constructionpartners.net>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-10-31 21:23:51 +00:00
fknorn
cf9cdf1292
Added images to Nexus 93600CD-GX ( #2444 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
2024-10-31 15:28:55 +00:00
fknorn
52b79c2d0a
Added images for Cisco APIC-L3 ( #2443 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
2024-10-31 15:27:33 +00:00
kaio Guilherme
45798e72ca
add extreme-networks-elevation-images-x150-series ( #2437 )
...
* add extreme-networks-elevation-images-x150-series
* fix yaml x150-series
2024-10-31 08:59:01 +00:00
Robin Reinhardt
0cc5dc1373
Add Meinberg IMS LANTIME M1000 ( #2240 )
...
* Add Meinberg IMS LANTIME M1000
* fix module bay names
* fix device type filename
* Adjusted to remove duplication
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-10-30 21:31:40 +00:00
fknorn
a41ce013fc
Added UCS C220 M7S ( #2438 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
2024-10-30 21:12:43 +00:00
Bastian Leicht
ca97e341ef
Add APC SMT1500RMI2UC ( #2434 )
...
* Add APC SMT1500RMI2UC
* Add APC SMT3000RMI2UC Images
* Add APC SMT1500RMI2UC weight
* Fix image names
---------
Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com>
2024-10-29 13:03:25 -04:00
Olen
fee42b37a3
Add Juniper MX304 ( #2298 )
...
* Add MX304
* Remove whitespace
2024-10-28 20:01:14 -04:00
raven
603a91a744
Eaton Tripp Lite Updates ( #2313 )
...
* Add Tripp-Lite-B064-032-01-IPG
* Update Tripp-Lite-B064-016-02-IPG based on changes made for Tripp-Lite-B064-032-01-IPG.
* Add B072-032-IP2
* Set correct network port names for B064 series.
* Update Tripp-Lite-B064-032-01-IPG.yaml
adjust network port speeds
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-10-25 21:24:17 +01:00
ch
0630a2ede6
Cisco Device: Add C9500X-28C8D ( #2093 )
...
* Cisco Device: Add C9500X-28C8D
Cisco Catalyst 9500X switch with 28x 40/100G QSFP28 ports
+ 8x 40/100/200/400G Gigabit Ethernet
* Update C9500X-28C8D.yaml
---------
Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-10-24 22:36:05 +01:00
Bastian Leicht
42b2340eb9
Device updates ( #2089 )
...
* Add Digitus DN-95117
* Add QNAP TS-231P2
* Add CBS350-48T-4G front image
* Remove blank lines
* Add CBS350-24T-4X
* Add missing document start
* Add missing Cisco CBS-24P-4G Front Image
* Add missing Ubiquiti USW-Pro-24 Front Image
* Remove invalid usb ports
* Add Cisco SG550X-48-K9 front image
* Rename Image
* Add Cisco SG550X-24MP front image
* Rename Cisco SG550X-24MP front image
* Add Cisco SG550X-24 front image
* Add Cisco CBS350-16T-2G-EU
* Add missing docment start
* Add Adtran NetVanta 4660 front image
* Add Diamond flexos BGT 3 + 1HE
* Add Kompaktmodul Simplex 12 Ports E-2000
* Fix end of file
* Fix end of file
* Fix slug & Module Ports
* Rename File
* Add missing rear port
* Add missing rear ports & fix slug
* Add missing rear ports & fix slug
* Fix Filenames & Slug
* Fix Filename
* Fix Manufacturer Name
* Fix Slug
* Add Ubiquiti UXG-Pro
* Add HPE OfficeConnect 1920-24G
* Add HPE OfficeConnect 1920-8G
* Update Port Names of HPE OfficeConnect 1920-24G
* Add HPE OfficeConnect 1920-16G
* Delete device-types/Cisco/cbs350-24t-4x.yml
* Fixing formatting
* Update OfficeConnect-1920-16G.yml
Fixing formatting
* Update OfficeConnect-1920-24G.yml
Fixing formatting
* Remove Disks
* Update and rename CBS350-16T-2G-EU.yml to CBS350-16T-2G.yml
removed -eu from model name
* Rename cisco-cbs350-16t-2g-eu.front.png to cisco-cbs350-16t-2g.front.png
* Update UXG-Pro.yml
* Update OfficeConnect-1920-8G.yml
* Update OfficeConnect-1920-16G.yml
* Update OfficeConnect-1920-24G.yml
---------
Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-10-24 22:16:12 +01:00
fknorn
f42a76d7f3
Added Cisco FMC4600 ( #2407 )
...
Co-authored-by: fknorn <fknorn@cisco.com>
2024-10-24 11:05:14 +01:00
Olen
aea63d89fe
Add Juniper PTX10k4 and several PTX10K linecards ( #2299 )
...
* Add PTX10k4 and several PTX10K linecards
* Fix whitespace
* Update PTX10004.yaml
* fix: crop whitespace from elevation images
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-10-23 09:34:59 +01:00
Jeff Groom
0a06a15d78
Ciena Devices ( #2331 )
...
* 8110
* weight fix
* fix comments
* add image
* 8110 rear image
* fix draw
* module slugs
* more devices
* add and fix
* 8112s
* 8112 image
* fix 5131
* formatting
* 5130 specs
* 5142 power modules
* 51xx
* lint
* lint
* 5162
* 5164
* 516x
* modules
* 8110
* 8114
* 8140
* 8180
* 8180
* 8190
* lint
* front-to-rear
* add calient
* add image
* more images
* images
* 5131 image
* 5142 image
* images
* image replacement
* 40 and 42
* lint and rename
* file renames
* renames
* renames
* modules
* renames
* renames
* add Waveserver 5
* lint
* image names
* renames
* cp consoles
* rename
* ws5 ps
* add waveserver ai
* 5162 image
* add rls
* 8140 image
* fix calient height
* add 8192
* add some els
* add panduit covers
* 3806 enclosure
* lint
* no power on enclosure
* add typical draw
* weight and draw
* weight and draw
* add ws weights
* fix ws5 weight
* calient weight
* more weights
* fix allocated_draw naming
* 3806 power
* power
* more power
* fix lint
* fix test
* requested diagram changes
* json to yml
* remove json
* remove json
* prune parent/childs
* remove panduit
* add 3984
* fix ps
* file renames
* Update 3806.yaml
* Update 3940.yaml
added airflow
* resolve PR convos
* fix module position
---------
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-10-22 21:50:14 +01:00
Harry
7b552b35ea
Added Images for various Juniper EX platform ( #2245 )
...
* Upload of Juniper EX Switches
* Update EX2300-C-12P.yaml
Added images
* Update EX2300-48P.yaml
Added images
* Update EX3400-48P.yaml
added images
* Update EX3400-48T.yaml
added images
* Update EX4100-48P.yaml
added images
* Update EX4100-48T.yaml
Added images
* Update EX4100-F-12P.yaml
Added images
* Update EX4300-24P.yaml
Added images
* Update EX4300-24T.yaml
Added images
* Update EX4300-48MP.yaml
Added front image
* Added images for ex4300-24t
* Update EX4300-48P.yaml
Added images
* Update EX4600-40F.yaml
Added images
* Update EX4400-48F.yaml
Added images
* Add files via upload
* Rename juniper-ex2300-12p.front.png to juniper-ex2300-c-12p.front.png
* Rename juniper-ex2300-12p.rear.png to juniper-ex2300-c-12p.rear.png
* Fixed uplinks on EX2300-48T
* Fixed uplinks on EX2300-48P
* Fixed uplinks on EX2300-48MP
* Fixed uplinks on EX2300-24T
* Fixed uplinks on EX2300-24T-DC
* Fixed uplinks on EX2300-24P
* Fixed uplinks on EX2300-24MP
* Update EX4300-48MP to full depth
* Adjusted images
* Re-cropped the remaining images
---------
Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com>
2024-10-20 14:32:54 -04:00
Bastian Leicht
79bce517fd
Power Sockets ( #2102 )
...
* Add Bachmann 6x Power Socket
* Update Port Names
* Fix Spaces Error
* Fix Part Number not String
* Add Rittal DK 7240.210
* Add Update Model Name
* Add Update Model Name
* Add Update Comment
* Fix Slug
* Fix Filename
* Add Brennenstuhl 1156057128
* Fix model name
* Fix model name
* Add missing values
* Add missing values
* Add missing Values
---------
Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com>
Co-authored-by: Harry <Harry@cadby.co.uk>
2024-10-18 14:24:37 +01:00
Renato Beletti da Silva
cf537c0ff3
Adicionado imagens do Aruba 1930-48P ( #2269 )
...
* Adicionado imagens do Aruba 1930-48P
* Rename hpe-aruba-1930-48.back.jpg to hpe-aruba-1930-48g.rear.jpg
* Rename hpe-aruba-1930-48.front.jpg to hpe-aruba-1930-48g.front.jpg
* Update Aruba-1930-48G.yaml
added image config
---------
Co-authored-by: Renato Beletti <renato.beletti@nbr.local>
Co-authored-by: Harry
2024-10-17 22:21:23 +01:00
Dominic
463d1b28be
Add elevation images to Cisco C1000-48P-4G-L ( #2275 )
...
* Add elevation images to Cisco C1000-48P-4G-L
* update cisco-c1000-48t-4g-l and revert cisco-c1000-48p-4g-l
* update cisco-c1000-48p-4g-l images
2024-10-17 22:11:15 +01:00
Dominic
e9949979a7
Update Fortigate 10XE and ad 301B ( #2277 )
...
* add fg 101e with elevations and 100E rear
* Add FortiGate 310B
* Correct 310b image names
* Update FG-101E.yaml
added some extra data
* Update FG-100E.yaml
added rear image
* Update FG-310B.yaml
added extra data
* Rename fortinet-fg-310b.back.png to fortinet-fg-310b.rear.png
---------
Co-authored-by: Harry
2024-10-17 22:08:24 +01:00
Patrick
7adc6de548
Add Huawei switch S6730-S24X6Q ( #2390 )
...
* Add huawei-s6730-s24x6q, include device images
* Changed part_number to be equal to the model name
* Update S6730-S24X6Q.yaml
Added a few extra details
* Update S6730-S24X6Q.yaml
added line for images
* rename images
---------
Co-authored-by: Harry
2024-10-17 21:09:06 +01:00
Jorik Jonker
a502940cb7
Add some devices ( #2368 )
...
* feat: add Arista DCS-7050TX-64
* feat: add Arista DCS-7160-48YC6
* feat: add Arista DCS-7280CR3MK-32D4A
* feat: add Arista DCS-7280SE-72
* feat: add F5 BIG-IP 4000s
* feat: add Fortinet FortiGate 1200d
* feat: add Fortinet FortiGate 201F
* feat: add Fortinet FortiGate 500D
* fix: enable POE on HPE 2610-24-POE ports
* feat: add HPE ProCurve 2610-48-POE (J9089A)
* feat: add HPE ProCurve 2848 (J4904A)
* feat: add HPE ProCurve 2910al-48G (J9147A)
* fix: add part number to HPE ProCurve 2510-48 (J9020A)
* feat: add HPE Aruba 2530-48G-2SFP+ (J9855A)
* feat: add HPE Aruba 2620-48 PoE+
* fix: add PoE to HPE Aruba 2620-24 PoE+
* feat: add HPE ProCurve 2900-48G (J9050A)
* feat: add HPE ProCurve 600 (J8168A)
* fix: add RPS port to HPE ProCurve 2824 and 2848
* feat: add HPE ProCurve 630 (J9443A)
* fix: add RPS port to HPE ProCurve 2910al series
* feat: add Brocade ICX6400-IPS1500
* fix: add EPS port to ICX64xx series
* feat: Brocade 6610 has modular PSUs
* feat: add Brocade ICX6610-24F
* feat: add Fortinet FortiRPS 100
* Update DCS-7130LBR-48S6QD-R.yaml
Fixed slug
* Update DCS-7050TX-64.yaml
Fixed module error
* Update DCS-7280SE-72-F.yaml
Fixed module error
* Update DCS-7280SE-72-R.yaml
Fixed module error
* Update FRPS-100.yaml
Fixed Manufacture error
* Update ICX-6610-24.yaml
Fixed Module error
* Update ICX-6610-24F.yaml
Fixed module error
* Update ICX-6610-48.yaml
Fixed module error
* Update ICX-6610-48p.yaml
Fixed module error
* Update FG-1200D.yaml
Fixed module error
* Update BIG-IP-4000s.yaml
Fixed module error
* Update ProCurve-2900-48G.yaml
* Update DCS-7050TX-64.yaml
Updated to spec sheet
* Update ICX-6610-24F.yaml
added data
* Update FG-1200D.yaml
* Update Aruba-2620-24-PoEP.yml
ports are POE at not af
* Update Aruba-2620-48-PoEP.yml
changed poe to at
---------
Co-authored-by: Harry
Co-authored-by: Daniel W. Anner <daniel.anner@danstechsupport.com>
2024-10-16 22:50:20 +01:00
Dominic
34b12969d2
Update F5 Big-IP i2000 series ( #2273 )
...
* Update F5 Big-IP i2000 series
Add elevation images and PS Module for F5 Big-IP i2000 series
* Updtae comments to use markdown for links.
* Rename PWR_0334.yaml to PWR-0334.yaml
2024-10-14 11:15:37 +01:00
raven
de87095cbc
Add front and rear image for HPE ProLiant DL360 Gen9 ( #2297 )
...
* Add front and rear image for HPE ProLiant DL360 Gen9
* Fix typos while we are at it.
---------
Co-authored-by: Giotta Simon <simon.giotta@ruag.ch>
2024-10-13 22:05:16 +01:00
