encfs/po/nds.po

# German, Low translation for encfs
# Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007
# This file is distributed under the same license as the encfs package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: encfs\n"
"Report-Msgid-Bugs-To: https://translations.launchpad.net/encfs/main/+pots/"
"encfs\n"
"POT-Creation-Date: 2015-03-13 21:26-0700\n"
"PO-Revision-Date: 2009-10-21 15:42+0000\n"
"Last-Translator: tbds <Unknown>\n"
"Language-Team: German, Low <nds@li.org>\n"
"Language: nds\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Launchpad-Export-Date: 2015-03-14 00:04+0000\n"
"X-Generator: Launchpad (build 17389)\n"

#: encfs/BlockFileIO.cpp:385
#, c-format
msgid "truncate failure: read %i bytes, partial block of %i"
msgstr "Afsniedsfehler: Ingelesen sün %i bytes, Deel %i"

#: encfs/encfsctl.cpp:77
msgid "  -- show information (Default command)"
msgstr "  -- Zeige Informationen (Standardbefehl)"

#: encfs/encfsctl.cpp:80
msgid "  -- show key"
msgstr ""

#: encfs/encfsctl.cpp:83
msgid "  -- change password for volume"
msgstr "  -- Passwort für Datenträger ändern"

#: encfs/encfsctl.cpp:87
msgid ""
"  -- change password for volume, taking password from standard input.\n"
"\tNo prompts are issued."
msgstr ""
"  -- ändere das Passwort für den Datenträger. Das Passwort wird von der "
"Standardeingabe gelesen."

#: encfs/encfsctl.cpp:92
msgid "  -- show undecodable filenames in the volume"
msgstr "  -- Zeige nicht dekodierbare Dateinamen auf dem Datenträger"

#: encfs/encfsctl.cpp:95
msgid "  -- decodes the file and cats it to standard out"
msgstr "  -- dekodiert die Datei und gibt sie auf der Standardausgabe aus"

#: encfs/encfsctl.cpp:99
msgid "  -- decodes name and prints plaintext version"
msgstr "  -- dekodiert Namen und gibt die klartext Version aus"

#: encfs/encfsctl.cpp:103
msgid "  -- encodes a filename and print result"
msgstr "  -- kodiert Dateinamen und gibt das Ergebnis aus"

#: encfs/encfsctl.cpp:106
msgid "  -- decrypts a volume and writes results to path"
msgstr ""
"  -- entschlüsselt einen Datenträger und schreibt das Ergebnis zum Pfad"

#: encfs/encfsctl.cpp:109
msgid "  -- print version number and exit"
msgstr "  -- gibt Versionsnummer aus und beendet"

#: encfs/encfsctl.cpp:113 encfs/encfsctl.cpp:151
#, c-format
msgid "encfsctl version %s"
msgstr "encfsctl Version %s"

#: encfs/encfsctl.cpp:114
msgid "Usage:\n"
msgstr "Benutung:\n"

#: encfs/encfsctl.cpp:118
#, c-format
msgid ""
"%s (root dir)\n"
"  -- displays information about the filesystem, or \n"
msgstr ""
"%s (Stammverzeichnis)\n"
"  -- zeigt Informationen über das Dateisystem \n"

#: encfs/encfsctl.cpp:134
#, c-format
msgid ""
"Example: \n"
"%s info ~/.crypt\n"
msgstr ""
"Beispiel: \n"
"%s info ~/.crypt\n"

#: encfs/encfsctl.cpp:139
#, c-format
msgid "directory %s does not exist.\n"
msgstr "Verzeichnis %s existiert nicht.\n"

#: encfs/encfsctl.cpp:168 encfs/encfsctl.cpp:613
msgid "Unable to load or parse config file\n"
msgstr "Konnte Konfigurationsdatei nicht lesen oder anwenden\n"

#: encfs/encfsctl.cpp:173
msgid ""
"A really old EncFS filesystem was found. \n"
"It is not supported in this EncFS build.\n"
msgstr ""
"Ein wirklich altes EncFS Dateisystem wurde gefunden. \n"
"Es wird von dieser build-Version nicht mehr unterstützt.\n"

#: encfs/encfsctl.cpp:178
#, c-format
msgid "Version 3 configuration; created by %s\n"
msgstr "Version 3 Konfiguration; erstellt von %s\n"

#: encfs/encfsctl.cpp:184
#, c-format
msgid "Version 4 configuration; created by %s\n"
msgstr "Verschoon 4 Konfiguratschoon; erstellt vun %s\n"

#: encfs/encfsctl.cpp:190
#, c-format
msgid "Version 5 configuration; created by %s (revision %i)\n"
msgstr "Version 5 Konfiguration; Erstellt von %s (revision %i)\n"

#: encfs/encfsctl.cpp:196
#, c-format
msgid "Version 6 configuration; created by %s (revision %i)\n"
msgstr ""

#: encfs/encfsctl.cpp:226 encfs/main.cpp:355
#, c-format
msgid "getopt error: %i"
msgstr "getopt Fehler: %i"

#: encfs/encfsctl.cpp:235
msgid "Incorrect number of arguments"
msgstr ""

#: encfs/encfsctl.cpp:245 encfs/encfsctl.cpp:264
msgid "Unable to initialize encrypted filesystem - check path.\n"
msgstr ""
"Konnte verschlüsseltes Dateisystem nicht initialisieren, überprüfen Sie den "
"Pfad.\n"

#: encfs/encfsctl.cpp:555
#, c-format
msgid "In directory %s: \n"
msgstr "Im Verzeichnis %s: \n"

#: encfs/encfsctl.cpp:597
#, c-format
msgid "Found %i invalid file."
msgid_plural "Found %i invalid files."
msgstr[0] "%i ungültige Datei funnen"
msgstr[1] "%i ungültige Dateien funnen"

#: encfs/encfsctl.cpp:620
#, c-format
msgid "Unable to find specified cipher \"%s\"\n"
msgstr ""

#: encfs/encfsctl.cpp:626
msgid "Enter current Encfs password\n"
msgstr "Geben sie ihr derzeitiges Encfs Passwort ein\n"

#: encfs/encfsctl.cpp:636
msgid "Invalid password\n"
msgstr "Falsches Passwort\n"

#: encfs/encfsctl.cpp:642
msgid "Enter new Encfs password\n"
msgstr "Geben sie ein neues Encfs Passwort ein\n"

#: encfs/encfsctl.cpp:667
msgid "Volume Key successfully updated.\n"
msgstr "Datenträger Schlüssel erfolgreich erneuert.\n"

#: encfs/encfsctl.cpp:670
msgid "Error saving modified config file.\n"
msgstr "Fehler beim Speichern der geänderten Konfigurationsdatei.\n"

#: encfs/encfsctl.cpp:673
msgid "Error creating key\n"
msgstr ""

#: encfs/encfsctl.cpp:728
#, c-format
msgid "invalid command: \"%s\""
msgstr "Ungültiger Befehl: \"%s\""

#: encfs/encfsctl.cpp:733
#, c-format
msgid "Incorrect number of arguments for command \"%s\""
msgstr "Ungültige Anzahl an Parameter für Befehl \"%s\""

#: encfs/FileUtils.cpp:299
#, c-format
msgid "The directory \"%s\" does not exist. Should it be created? (y,n) "
msgstr "Das Verzeichnis \"%s\" existiert nicht, soll es erstellt werden (y,n) "

#: encfs/FileUtils.cpp:319
msgid "Unable to create directory: "
msgstr "Konnte Verzeichnis nicht erstellen: "

#: encfs/FileUtils.cpp:325
msgid "Directory not created."
msgstr "Verzeichnis nicht erstellt."

#: encfs/FileUtils.cpp:346
#, fuzzy, c-format
msgid "Found config file %s, but failed to load - exiting"
msgstr "Konfigurationsdatei %s gefunden, konnte jedoch nicht geladen werden"

#: encfs/FileUtils.cpp:428
#, c-format
msgid ""
"Config subversion %i found, but this version of encfs only supports up to "
"version %i."
msgstr ""

#: encfs/FileUtils.cpp:435
msgid ""
"This version of EncFS doesn't support filesystems created before 2004-08-13"
msgstr ""
"Diese Version von EncFS unterstützt keine Dateisysteme die vor dem "
"13.08.2004 erstellt wurden"

#: encfs/FileUtils.cpp:617
msgid "The following cipher algorithms are available:"
msgstr "Die folgenden  following Chiffre Algorythmen sind verfügbar:"

#: encfs/FileUtils.cpp:627
#, c-format
msgid " -- key length %i bits"
msgstr " -- Slötellänge %i bits"

#: encfs/FileUtils.cpp:633
#, c-format
msgid " -- Supports key lengths of %i to %i bits"
msgstr " -- Unterstützt Key längen von %i bis %i Bits"

#: encfs/FileUtils.cpp:641
#, c-format
msgid " -- block size %i bytes"
msgstr " -- Block Größe %i Bytes"

#: encfs/FileUtils.cpp:646
#, c-format
msgid " -- Supports block sizes of %i to %i bytes"
msgstr " -- Unterstützt Blockgrößen von %i bis %i Bytes"

#: encfs/FileUtils.cpp:652 encfs/FileUtils.cpp:694
msgid "Enter the number corresponding to your choice: "
msgstr ""

#: encfs/FileUtils.cpp:659 encfs/FileUtils.cpp:701
msgid "Invalid selection."
msgstr "Ungültige Auswahl."

#: encfs/FileUtils.cpp:670 encfs/FileUtils.cpp:710
#, c-format
msgid "Selected algorithm \"%s\""
msgstr "Ausgewählter Algorythmus \"%s\""

#: encfs/FileUtils.cpp:683
msgid "The following filename encoding algorithms are available:"
msgstr ""

#: encfs/FileUtils.cpp:721 encfs/FileUtils.cpp:764
#, c-format
msgid "Using key size of %i bits"
msgstr ""

#: encfs/FileUtils.cpp:729
#, c-format
msgid ""
"Please select a key size in bits.  The cipher you have chosen\n"
"supports sizes from %i to %i bits in increments of %i bits.\n"
"For example: "
msgstr ""
"Bidde Slötelgröte in bits angeven. De chiffre, de je utwählt hebbst, "
"unnerstütt Gröten vun %i bit %i Bits mit Erwietern vun %i Bits. Bispeel: "

#: encfs/FileUtils.cpp:754
msgid "Selected key size: "
msgstr "Utwählte Slötelgröte: "

#: encfs/FileUtils.cpp:776 encfs/FileUtils.cpp:802
#, c-format
msgid "Using filesystem block size of %i bytes"
msgstr "Benutze Blockgröße von Dateisystem: %i Bytes"

#: encfs/FileUtils.cpp:783
#, c-format
msgid ""
"Select a block size in bytes.  The cipher you have chosen\n"
"supports sizes from %i to %i bytes in increments of %i.\n"
"Or just hit enter for the default (%i bytes)\n"
msgstr ""

#: encfs/FileUtils.cpp:790
msgid "filesystem block size: "
msgstr "Dateisystem Block Größe: "

#: encfs/FileUtils.cpp:861
msgid ""
"Enable block authentication code headers\n"
"on every block in a file?  This adds about 12 bytes per block\n"
"to the storage requirements for a file, and significantly affects\n"
"performance but it also means [almost] any modifications or errors\n"
"within a block will be caught and will cause a read error."
msgstr ""

#: encfs/FileUtils.cpp:873
msgid ""
"Add random bytes to each block header?\n"
"This adds a performance penalty, but ensures that blocks\n"
"have different authentication codes.  Note that you can\n"
"have the same benefits by enabling per-file initialization\n"
"vectors, which does not come with as great of performance\n"
"penalty. \n"
"Select a number of bytes, from 0 (no random bytes) to 8: "
msgstr ""

#: encfs/FileUtils.cpp:899
msgid ""
"Enable per-file initialization vectors?\n"
"This adds about 8 bytes per file to the storage requirements.\n"
"It should not affect performance except possibly with applications\n"
"which rely on block-aligned file io for performance."
msgstr ""

#: encfs/FileUtils.cpp:911
msgid ""
"Enable filename initialization vector chaining?\n"
"This makes filename encoding dependent on the complete path, \n"
"rather then encoding each path element individually."
msgstr ""

#: encfs/FileUtils.cpp:922
msgid ""
"Enable filename to IV header chaining?\n"
"This makes file data encoding dependent on the complete file path.\n"
"If a file is renamed, it will not decode sucessfully unless it\n"
"was renamed by encfs with the proper key.\n"
"If this option is enabled, then hard links will not be supported\n"
"in the filesystem."
msgstr ""

#: encfs/FileUtils.cpp:936
msgid ""
"Enable file-hole pass-through?\n"
"This avoids writing encrypted blocks when file holes are created."
msgstr ""

#: encfs/FileUtils.cpp:955
msgid "Creating new encrypted volume."
msgstr "Erstelle neues verschlüsseltes Dateisystem."

#: encfs/FileUtils.cpp:960
msgid ""
"Please choose from one of the following options:\n"
" enter \"x\" for expert configuration mode,\n"
" enter \"p\" for pre-configured paranoia mode,\n"
" anything else, or an empty line will select standard mode.\n"
"?> "
msgstr ""
"Bitte wähle eine der folgenden Einstellungen:\n"
" gib \"x\" ein für den Experteneinstellungsmodus\n"
" gib \"p\" ein für den den Voreingestellten empfohlenen modus\n"
" alles andere, oder keine eingabe wird den Standart modus Aktivieren\n"
"?> "

#: encfs/FileUtils.cpp:995
msgid "Paranoia configuration not supported for reverse encryption"
msgstr ""

#: encfs/FileUtils.cpp:1000
msgid "Paranoia configuration selected."
msgstr ""

#: encfs/FileUtils.cpp:1018
msgid "Standard configuration selected."
msgstr ""

#: encfs/FileUtils.cpp:1030
msgid "reverse encryption - chained IV disabled"
msgstr ""

#: encfs/FileUtils.cpp:1039
msgid ""
"Sorry, unable to locate cipher for predefined configuration...\n"
"Falling through to Manual configuration mode."
msgstr ""

#: encfs/FileUtils.cpp:1044
msgid "Manual configuration mode selected."
msgstr ""

#: encfs/FileUtils.cpp:1054
msgid "reverse encryption - chained IV and MAC disabled"
msgstr ""

#: encfs/FileUtils.cpp:1068
msgid ""
"External chained IV disabled, as both 'IV chaining'\n"
"and 'unique IV' features are required for this option."
msgstr ""

#: encfs/FileUtils.cpp:1080
#, c-format
msgid "Unable to instanciate cipher %s, key size %i, block size %i"
msgstr ""

#: encfs/FileUtils.cpp:1110
msgid ""
"Configuration finished.  The filesystem to be created has\n"
"the following properties:"
msgstr ""

#: encfs/FileUtils.cpp:1115
msgid "-------------------------- WARNING --------------------------\n"
msgstr ""

#: encfs/FileUtils.cpp:1116
msgid ""
"The external initialization-vector chaining option has been\n"
"enabled.  This option disables the use of hard links on the\n"
"filesystem. Without hard links, some programs may not work.\n"
"The programs 'mutt' and 'procmail' are known to fail.  For\n"
"more information, please see the encfs mailing list.\n"
"If you would like to choose another configuration setting,\n"
"please press CTRL-C now to abort and start over."
msgstr ""

#: encfs/FileUtils.cpp:1127
msgid ""
"Now you will need to enter a password for your filesystem.\n"
"You will need to remember this password, as there is absolutely\n"
"no recovery mechanism.  However, the password can be changed\n"
"later using encfsctl.\n"
"\n"
msgstr ""
"Jetzt musst du ein Passwort für dein Dateisystem eingeben.\n"
"Du musst dir das Passwort merken, da es keine Möglichkeit gibt es "
"wiederherzustellen!\n"
"Es ist auch nacher möglich das Passwort mit encfsctl zu ändern.\n"
"\n"

#: encfs/FileUtils.cpp:1156
msgid "Failure generating new volume key! Please report this error."
msgstr ""

#: encfs/FileUtils.cpp:1167
msgid "Name coding interface not supported"
msgstr ""

#: encfs/FileUtils.cpp:1168
msgid "The filename encoding interface requested is not available"
msgstr ""

#: encfs/FileUtils.cpp:1199
#, c-format
msgid "Filesystem cipher: \"%s\", version %i:%i:%i"
msgstr ""

#: encfs/FileUtils.cpp:1205 encfs/FileUtils.cpp:1228 encfs/FileUtils.cpp:1244
msgid " (NOT supported)\n"
msgstr ""

#: encfs/FileUtils.cpp:1211 encfs/FileUtils.cpp:1233
#, c-format
msgid " (using %i:%i:%i)\n"
msgstr ""

#: encfs/FileUtils.cpp:1219
#, c-format
msgid "Filename encoding: \"%s\", version %i:%i:%i"
msgstr ""

#: encfs/FileUtils.cpp:1240
#, c-format
msgid "Key Size: %i bits"
msgstr ""

#: encfs/FileUtils.cpp:1249
#, c-format
msgid "Using PBKDF2, with %i iterations"
msgstr ""

#: encfs/FileUtils.cpp:1251
#, c-format
msgid "Salt Size: %i bits"
msgstr ""

#: encfs/FileUtils.cpp:1257
#, c-format
msgid "Block Size: %i bytes + %i byte MAC header"
msgstr ""

#: encfs/FileUtils.cpp:1264
#, c-format
msgid "Block Size: %i bytes, including %i byte MAC header"
msgstr "Blockgröte: %i bytes, insluten %i byte MAC header"

#: encfs/FileUtils.cpp:1270
#, c-format
msgid "Block Size: %i bytes"
msgstr ""

#: encfs/FileUtils.cpp:1276
msgid "Each file contains 8 byte header with unique IV data.\n"
msgstr ""

#: encfs/FileUtils.cpp:1280
msgid "Filenames encoded using IV chaining mode.\n"
msgstr ""

#: encfs/FileUtils.cpp:1284
msgid "File data IV is chained to filename IV.\n"
msgstr ""

#: encfs/FileUtils.cpp:1288
msgid "File holes passed through to ciphertext.\n"
msgstr ""

#: encfs/FileUtils.cpp:1333
msgid "Error creating salt\n"
msgstr ""

#: encfs/FileUtils.cpp:1357
msgid "EncFS Password: "
msgstr ""

#: encfs/FileUtils.cpp:1363
msgid "Zero length password not allowed\n"
msgstr ""

#: encfs/FileUtils.cpp:1404
msgid "Internal error: socketpair() failed"
msgstr ""

#: encfs/FileUtils.cpp:1411
msgid "Internal error: fork() failed"
msgstr ""

#: encfs/FileUtils.cpp:1452
msgid "Internal error: failed to exec program"
msgstr ""

#: encfs/FileUtils.cpp:1478
msgid "New Encfs Password: "
msgstr "Neues Encfs Passwort: "

#: encfs/FileUtils.cpp:1481
msgid "Verify Encfs Password: "
msgstr ""

#: encfs/FileUtils.cpp:1488
msgid "Passwords did not match, please try again\n"
msgstr ""

#: encfs/FileUtils.cpp:1508
msgid "The configuration loaded is not compatible with --reverse\n"
msgstr ""

#: encfs/FileUtils.cpp:1516
#, c-format
msgid "Unable to find cipher %s, version %i:%i:%i"
msgstr ""

#: encfs/FileUtils.cpp:1520
msgid "The requested cipher interface is not available\n"
msgstr ""

#: encfs/FileUtils.cpp:1551
msgid "Error decoding volume key, password incorrect\n"
msgstr ""

#: encfs/FileUtils.cpp:1558
#, c-format
msgid "Unable to find nameio interface %s, version %i:%i:%i"
msgstr ""

#: encfs/FileUtils.cpp:1562
msgid "The requested filename coding interface is not available\n"
msgstr ""

#: encfs/FileUtils.cpp:1602
msgid "Remount failed"
msgstr ""

#: encfs/MACFileIO.cpp:189
#, c-format
msgid "MAC comparison failure in block %li"
msgstr ""

#: encfs/MACFileIO.cpp:192
msgid "MAC comparison failure, refusing to read"
msgstr ""

#: encfs/main.cpp:114
#, c-format
msgid "Build: encfs version %s"
msgstr "Erstellt: encfs Verschoon %s"

#: encfs/main.cpp:117
#, c-format
msgid "Usage: %s [options] rootDir mountPoint [-- [FUSE Mount Options]]"
msgstr ""

#: encfs/main.cpp:121
msgid ""
"Common Options:\n"
"  -H\t\t\tshow optional FUSE Mount Options\n"
"  -s\t\t\tdisable multithreaded operation\n"
"  -f\t\t\trun in foreground (don't spawn daemon).\n"
"\t\t\tError messages will be sent to stderr\n"
"\t\t\tinstead of syslog.\n"
msgstr ""

#: encfs/main.cpp:132
msgid ""
"  -v, --verbose\t\tverbose: output encfs debug messages\n"
"  -i, --idle=MINUTES\tAuto unmount after period of inactivity\n"
"  --anykey\t\tDo not verify correct key is being used\n"
"  --forcedecode\t\tdecode data even if an error is detected\n"
"\t\t\t(for filesystems using MAC block headers)\n"
msgstr ""

#: encfs/main.cpp:141
msgid ""
"  --public\t\tact as a typical multi-user filesystem\n"
"\t\t\t(encfs must be run as root)\n"
msgstr ""

#: encfs/main.cpp:143
msgid "  --reverse\t\treverse encryption\n"
msgstr ""

#: encfs/main.cpp:147
msgid ""
"  --extpass=program\tUse external program for password prompt\n"
"\n"
"Example, to mount at ~/crypt with raw storage in ~/.crypt :\n"
"    encfs ~/.crypt ~/crypt\n"
"\n"
msgstr ""

#: encfs/main.cpp:153
msgid "For more information, see the man page encfs(1)"
msgstr ""

#: encfs/main.cpp:158
msgid ""
"encfs [options] rootDir mountPoint -- [FUSE Mount Options]\n"
"valid FUSE Mount Options follow:\n"
msgstr ""

#: encfs/main.cpp:330
msgid "option '--public' ignored for non-root user"
msgstr ""

#: encfs/main.cpp:341
#, c-format
msgid "encfs version %s"
msgstr ""

#: encfs/main.cpp:376
msgid "Missing one or more arguments, aborting."
msgstr ""

#: encfs/main.cpp:396
msgid ""
"When specifying daemon mode, you must use absolute paths (beginning with '/')"
msgstr ""

#: encfs/main.cpp:409
msgid "The raw directory may not be a subdirectory of the mount point."
msgstr ""

#: encfs/main.cpp:418
msgid "You must use mount-on-demand with delay-mount"
msgstr ""

#: encfs/main.cpp:425
msgid "Must set password program when using mount-on-demand"
msgstr ""

#: encfs/main.cpp:433
msgid "Unable to locate root directory, aborting."
msgstr ""

#: encfs/main.cpp:439
msgid "Unable to locate mount point, aborting."
msgstr ""

#: encfs/main.cpp:617
msgid ""
"Note: requested single-threaded mode, but an idle\n"
"timeout was specified.  The filesystem will operate\n"
"single-threaded, but threads will still be used to\n"
"implement idle checking."
msgstr ""

#: encfs/main.cpp:668
msgid ""
"fuse failed.  Common problems:\n"
" - fuse kernel module not installed (modprobe fuse)\n"
" - invalid options -- see usage message\n"
msgstr ""

#: encfs/main.cpp:674
#, c-format
msgid "Internal error: Caught exception from main loop: %s"
msgstr ""

#: encfs/main.cpp:677
msgid "Internal error: Caught unexpected exception"
msgstr "Interner Fehler: Unerwartete Ausnahme aufgetreten"

#: encfs/main.cpp:757
#, c-format
msgid "Unmounting filesystem %s due to inactivity"
msgstr ""

#~ msgid "Block encoding, hides file name size somewhat"
#~ msgstr "Block-Enkoderen, verbargt Dateinaam, -gröte un süsswat"