# Description
Fixes: #13460
The issue is caused by `try_exists` method on path, it will return
`Err(NotADirectory)` if user tried to check for a path under a regular
file.
To fix it, I think it's ok to use `exists` rather than `try_exists`,
although
[Path::exists()](https://doc.rust-lang.org/std/path/struct.Path.html#method.exists)
only checks whether or not a path was both found and readable. I think
it's ok, and we can add this information under `extra_description`.
# User-Facing Changes
The following code will no longer raise error:
```
touch a; 'a/b' | path exists
```
# Tests + Formatting
Added 1 test.
# Description
According to emacs doc, I think `ctrl-k` should map to `cuttolineend`.
# User-Facing Changes
`ctrl-k` will no longer cut to the end of buffer
# Description
Add `metadata access`, which allows accessing/inspecting the metadata of
a stream in a closure.
```nu
ls | metadata access {|meta|
...
}
```
- The metadata is provided as an argument to the closure, identical to
the record obtained with `metadata` command.
- `metadata access` passes its input stream into the closure as it is.
- Within the closure, both the metadata and the stream are available.
The closure may modify, collect or pass the stream as it is.
# Motivation
- Without this command, nu code can't act on metadata without losing the
stream, use cases requiring both the stream and metadata must be
implemented either as a built-in or a plugin.
- This command allows users to enhance presentation of data, similar to
`table` coloring the output of `ls`.
# Description
This PR:
- Removes the lazy_command, expr_command macros and migrates the
commands that were utilizing them.
- Removes the custom logic in DataFrameValues::is_equals to use the
polars DataFrame version of PartialEq
- Adds examples to commands that previously did not have examples or had
inadequate ones.
NOTE: A lot of examples now have a `polars sort` at the end. This is
needed due to the comparison in the result. The new polars version of
equals cares about the ordering. I removed the custom equals logic as it
causes comparisons to lock up when comparing dataframes that contain a
row that contains a list. I discovered this issue when adding examples
to `polars implode`
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 0.33.0 to
0.34.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/baoyachi/shadow-rs/releases">shadow-rs's
releases</a>.</em></p>
<blockquote>
<h2>v0.34.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Make using the CARGO_METADATA object simpler by <a
href="https://github.com/baoyachi"><code>@baoyachi</code></a> in <a
href="https://redirect.github.com/baoyachi/shadow-rs/pull/181">baoyachi/shadow-rs#181</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.33.0...v0.34.0">https://github.com/baoyachi/shadow-rs/compare/v0.33.0...v0.34.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="ccb09f154b"><code>ccb09f1</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/181">#181</a>
from baoyachi/issue/179</li>
<li><a
href="65c56630da"><code>65c5663</code></a>
fix cargo clippy check</li>
<li><a
href="998d000023"><code>998d000</code></a>
Make using the CARGO_METADATA object simpler</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.33.0...v0.34.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This fixes a couple of remaining differences between the IR evaluator's
handling of env vars and the AST evaluator's handling of env vars.
Blocker for #13718 (this is why those tests failed)
# User-Facing Changes
1. Handles checking overlays for hidden env vars properly, when getting
an env var from IR instruction
2. Updates config properly when doing `redirect_env()` (these probably
shouldn't be separate functions anyway, though, they're basically the
same. I did this because I intended to remove one, but now it's just
like that)
# Tests + Formatting
The `nu_repl` testbin now handles `NU_USE_IR` properly, so these tests
now work as expected.
# After Submitting
- [ ] check in on #13718 again
# Description
Fixes a bug in the IR for `try` to match that of the regular evaluator
(continuing from #13515):
```nushell
# without IR:
try { ^false } catch { 'caught' } # == 'caught'
# with IR:
try { ^false } catch { 'caught' } # error, non-zero exit code
```
In this PR, both now evaluate to `caught`. For the implementation, I had
to add another instruction, and feel free to suggest better
alternatives. In the future, it might be possible to get rid of this
extra instruction.
# User-Facing Changes
Bug fix, `try { ^false } catch { 'caught' }` now works in IR.
# Description
This is my first PR, and I'm looking for feedback to help me improve!
This PR fixes#13380 by expanding the path prior to parsing it.
Also I've removed some unused code in
[completion_common.rs](84e92bb02c/crates/nu-cli/src/completions/completion_common.rs
)
# User-Facing Changes
Auto-completion for "cd .../" now works by expanding to "cd ../../".
# Tests + Formatting
Formatted and added 2 tests for triple dots in the middle of a path and
at the end.
Also added a test for the expand_ndots() function.
# Description
This PR bumps our rust version from 1.78 to 1.79.0 due to the 1.81.0
release.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Previously there were no examples or explanations that you can use '*'
to select all columns. Updated description and added a new example.
# Description
This PR makes it so that non-zero exit codes and termination by signal
are treated as a normal `ShellError`. Currently, these are silent
errors. That is, if an external command fails, then it's code block is
aborted, but the parent block can sometimes continue execution. E.g.,
see #8569 and this example:
```nushell
[1 2] | each { ^false }
```
Before this would give:
```
╭───┬──╮
│ 0 │ │
│ 1 │ │
╰───┴──╯
```
Now, this shows an error:
```
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:1:2]
1 │ [1 2] | each { ^false }
· ┬
· ╰── source value
╰────
Error: nu:🐚:non_zero_exit_code
× External command had a non-zero exit code
╭─[entry #1:1:17]
1 │ [1 2] | each { ^false }
· ──┬──
· ╰── exited with code 1
╰────
```
This PR fixes#12874, fixes#5960, fixes#10856, and fixes#5347. This
PR also partially addresses #10633 and #10624 (only the last command of
a pipeline is currently checked). It looks like #8569 is already fixed,
but this PR will make sure it is definitely fixed (fixes#8569).
# User-Facing Changes
- Non-zero exit codes and termination by signal now cause an error to be
thrown.
- The error record value passed to a `catch` block may now have an
`exit_code` column containing the integer exit code if the error was due
to an external command.
- Adds new config values, `display_errors.exit_code` and
`display_errors.termination_signal`, which determine whether an error
message should be printed in the respective error cases. For
non-interactive sessions, these are set to `true`, and for interactive
sessions `display_errors.exit_code` is false (via the default config).
# Tests
Added a few tests.
# After Submitting
- Update docs and book.
- Future work:
- Error if other external commands besides the last in a pipeline exit
with a non-zero exit code. Then, deprecate `do -c` since this will be
the default behavior everywhere.
- Add a better mechanism for exit codes and deprecate
`$env.LAST_EXIT_CODE` (it's buggy).
# Description
After merging #13788, I get an error message which says that
`use_grid_icons` is invalid.
I think it's good to report the specific error, and guide user to delete
it.
# Description
The content-type was not being handled appropriately when sending
requests with a string value.
# User-Facing Changes
- Passing a string value through a pipeline with a content-type set as
metadata is handled correctly
- Passing a string value as a parameter with a content-type set as a
flag is handled correctly.
# Description
After looking at #13751 I noticed that the config setting
`use_grid_icons` seems out of place. So, I removed it from the config
and made it a parameter to the `grid` command.
# Description
This PR fixes#13732. However, I don't think it's a proper fix.
1. It doesn't really show what the problem is.
2. It kind of side-steps the error entirely.
I do think the change in span.rs may be valid because I don't think
span.end should ever be 0. In the example in 13732 the span end was
always 0 and so that made contains_span() return true, which seems like
a false positive.
The `checked_sub()` in ide.rs kind of just stops it from failing
outloud.
I'll leave it to smarter folks than me to land this if they think it's
worthy.
Discovered by @cptpiepmatz that #13749 broke the standalone check for
`nu-protocol`
Explicit use of the feature as workspace root also disables all features
for `serde`. Alternatively we could reconsider this there.
# Description
The existing code uses exact matches on content type. This can caused
things like "application/json; charset=utf-8" that contain a charset not
using send_json method.
NOTE: The charset portion in the above example would still be ignored as
we rely on serde and the client library to control the encoding, it is
still better to catch the json case.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
In order to be more consistent with the nushell terminology and with
polars expression terminology `polars concatenate` is now `polars
str-join`. `polars str-join` can also be used as expression.
<img width="857" alt="Screenshot 2024-09-04 at 12 41 25"
src="https://github.com/user-attachments/assets/8cc5a0c2-194c-49ec-9fe1-65ec4825414d">
# User-Facing Changes
- `polars concatenate` is now `polars str-join`
- `polars str-join` can be used as an expression
# Description
Allows `polars str-lengths` to be used as an expression:
<img width="826" alt="Screenshot 2024-09-04 at 13 57 45"
src="https://github.com/user-attachments/assets/b74139e0-e8ba-4910-84c2-cf4be4a084b6">
# User-Facing Changes
- `polars str-lengths` can be used as an expression.
- char length is now the default. Use the --bytes flag to get bytes
length.
# Description
Cleans up and refactors the config code using the `IntoValue` macro.
Shoutout to @cptpiepmatz for making the macro!
# User-Facing Changes
Should be none.
# After Submitting
Somehow refactor the reverse transformation.
Closes#13687Closes#13686
# Description
Light refactoring of `send_request `in `client.rs`. In the end there are
more lines but now the logic is more concise and facilitates adding new
conditions in the future. Unit tests ran fine and I tested a few cases
manually.
Cool project btw, I'll be using nushell from now on.
# Description
This PR allows the helper attribute `nu_value(rename = "...")` to be
used on struct fields and enum variants. This allows renaming keys and
variants just like [`#[serde(rename =
"name")]`](https://serde.rs/field-attrs.html#rename). This has no
singular variants for `IntoValue` or `FromValue`, both need to use the
same (but I think this shouldn't be an issue for now).
# User-Facing Changes
Users of the derive macros `IntoValue` and `FromValue` may now use
`#[nu_value(rename = "...")]` to rename single fields, but no already
existing code will break.
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.4.0 to
2.5.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's
changelog</a>.</em></p>
<blockquote>
<h2>2.5.0</h2>
<ul>
<li>Added an <code>insert_before</code> method to <code>IndexMap</code>
and <code>IndexSet</code>, as an
alternative to <code>shift_insert</code> with different behavior on
existing entries.</li>
<li>Added <code>first_entry</code> and <code>last_entry</code> methods
to <code>IndexMap</code>.</li>
<li>Added <code>From</code> implementations between
<code>IndexedEntry</code> and <code>OccupiedEntry</code>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="48ed49017c"><code>48ed490</code></a>
Release 2.5.0</li>
<li><a
href="139d7addfb"><code>139d7ad</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/340">#340</a>
from cuviper/insert-bounds</li>
<li><a
href="1d9b5e3d03"><code>1d9b5e3</code></a>
Add doc examples for <code>insert_before</code> and
<code>shift_insert</code></li>
<li><a
href="8ca01b0df7"><code>8ca01b0</code></a>
Use <code>insert_before</code> for "new" entries in
<code>insert_sorted</code></li>
<li><a
href="7224def010"><code>7224def</code></a>
Add <code>insert_before</code> as an alternate to
<code>shift_insert</code></li>
<li><a
href="0247a1555d"><code>0247a15</code></a>
Document and assert index bounds in <code>shift_insert</code></li>
<li><a
href="922c6ad1af"><code>922c6ad</code></a>
Update the CI badge</li>
<li><a
href="e482e1768a"><code>e482e17</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/342">#342</a>
from cuviper/btree-like</li>
<li><a
href="b63e4a1556"><code>b63e4a1</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/341">#341</a>
from cuviper/from-entry</li>
<li><a
href="264e5b7304"><code>264e5b7</code></a>
Add doc aliases like <code>BTreeMap</code>/<code>BTreeSet</code></li>
<li>Additional commits viewable in <a
href="https://github.com/indexmap-rs/indexmap/compare/2.4.0...2.5.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This change allows one to see the version of their plugin file without
trying to register it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This pr addresses the comment:
https://github.com/nushell/nushell/issues/11791#issuecomment-2308384155
It's caused by if the last row have a very different format to the first
row, the value of `end_char` will exceed the `line_char_boundaries`.
Adding a guard for it should avoid such panic.
# User-Facing Changes
The following code should no longer panic:
```shell
"nu_plugin_highlight = '1.2.2+0.97.1' # A nushell plugin for syntax highlighting
trace_nu_plugin = '0.3.1' # A wrapper to trace Nu plugins
nu_plugin_bash_env = '0.13.0' # Nu plugin bash-env
nu_plugin_from_sse = '0.4.0' # Nushell plugin to convert a HTTP server sent event stream to structured data
... and 90 crates more (use --limit N to see more)" | detect columns -n --guess
```
# Tests + Formatting
Added 1 test.
# Description
This changes the behavior of `tee` to be more transparent when given a
value that isn't a list or range. Previously, anything that wasn't a
byte stream would converted to a list stream using the iterator
implementation, which led to some surprising results. Instead, now, if
the value is a string or binary, it will be treated the same way a byte
stream is, and the output of `tee` is a byte stream instead of the
original value. This is done so that we can synchronize with the other
thread on collect, and potentially capture any error produced by the
closure.
For values that can't be converted to streams, the closure is just run
with a clone of the value instead on another thread. Because we can't
wait for the other thread, there is no way to send an error back to the
original thread, so instead it's just written to stderr using
`report_error_new()`.
There are a couple of follow up edge cases I see where byte streams
aren't necessarily treated exactly the same way strings are, but this
should mostly be a good experience.
Fixes#13489.
# User-Facing Changes
Breaking change.
- `tee` now outputs and sends string/binary stream for string/binary
input.
- `tee` now outputs and sends the original value for any other input
other than lists/ranges.
# Tests + Formatting
Added for new behavior.
# After Submitting
- [ ] release notes: breaking change, command change
removing the `std` feature as well would drop some dependencies tied to
`rust_decimal` from the `Cargo.lock` but unclear to me what the actual
impact on compile times is.
We may want to consider dropping the `byte-unit` dependency altogether
as we have a significant fraction of our own logic to support the byte
units with 1024 and 1000 prefixes. Not sure which fraction is covered by
us or the dependency.
# Description
Implements `IntoValue` for `&str` and `DateTime` as well as other
nushell types like `Record` and `Closure`. Also allows `HashMap`s with
keys besides `String` to implement `IntoValue`.
# Description
This changes the serialization of custom values within the plugin
protocol to use MessagePack instead of bincode, removing the dependency
on bincode entirely.
Bincode does not seem to be very maintained anymore, and the externally
tagged enum representation doesn't seem to always work now even though
it should. Since we use MessagePack already anyway for the plugin
protocol, this seems like an obvious choice. This uses the unnamed
variant of the serialization rather than the named variant, which is
what the plugin protocol in general uses. The unnamed variant does not
include field names, which aren't really required here, so this should
give us something that's more or less as efficient as bincode is.
Should fix#13743.
# User-Facing Changes
- Will need to recompile plugins (but always do anyway)
- Doesn't technically break the plugin protocol (custom value data is a
black box / plugin implementation specific), but breaks compatibility
between `nu-plugin-engine` and `nu-plugin` so they do need to both be
updated to match.
# Tests + Formatting
All tests pass.
# After Submitting
- [ ] release notes
# Description
Remove the `#[cfg_attr(tarpaulin, ignore)]` code coverage attributes to
get rid warnings when compiling plugins with a more recent rust version
than nushell.
# Description
Adds the ability for `polars replace` and `polars replace-all` to work
as expressions.
# User-Facing Changes
- `polars replace` can be used with polars expressions
- `polars replace-all` can be used with polars expressions
# Description
`cargo` somewhat recently gained the capability to store `lints`
settings for the crate and workspace, that can override the defaults
from `rustc` and `clippy` lints. This means we can enforce some lints
without having to actively pass them to clippy via `cargo clippy -- -W
...`. So users just forking the repo have an easier time to follow
similar requirements like our CI.
## Limitation
An exception that remains is that those lints apply to both the primary
code base and the tests. Thus we can't include e.g. `unwrap_used`
without generating noise in the tests. Here the setup in the CI remains
the most helpful.
## Included lints
- Add `clippy::unchecked_duration_subtraction` (added by #12549)
# User-Facing Changes
Running `cargo clippy --workspace` should be closer to the CI. This has
benefits for editor configured runs of clippy and saves you from having
to use `toolkit` to be close to CI in more cases.
this PR should close#12168
# Description
Add `split cell-path`, inverse of `into cell-path`.
# User-Facing Changes
Currently there is no way to make use of cell-path values as a user,
other than passing them to builtin commands. This PR makes more use
cases possible.
This PR is an attempt to fix#8257 and fix#10985 (which is
duplicate-ish)
# Description
The parser currently doesn't know how to deal with colons appearing
while lexing whitespace-terminated tokens specifying a record value.
Most notably, this means you can't use datetime literals in record value
position (and as a consequence, `| to nuon | from nuon` roundtrips can
fail), but it also means that bare words containing colons cause a
non-useful error message.
`parser::parse_record` calls `lex::lex` with the `:` colon character in
the `special_tokens` argument. This allows colons to terminate record
keys, but as a side effect, it also causes colons to terminate record
*values*. I added a new function `lex::lex_n_tokens`, which allows the
caller to drive the lexing process more explicitly, and used it in
`parser::parse_record` to let colons terminate record keys while not
giving them special treatment when appearing in record values.
This PR description previously said: *Another approach suggested in one
of the issues was to support an additional datetime literal format that
doesn't require colons. I like that that wouldn't require new
`lex::lex_internal` behaviour, but an advantage of my approach is that
it also newly allows for string record values given as bare words
containing colons. I think this eliminates another possible source of
confusion.* It was determined that this is undesirable, and in the
current state of this PR, bare word record values with colons are
rejected explicitly. The better error message is still a win.
# User-Facing Changes
In addition to the above, this PR also disables the use of "special"
(non-item) tokens in record key and value position, and the use of a
single bare `:` as a record key.
Examples of behaviour *before* this PR:
```nu
{ a: b } # Valid, same as { 'a': 'b' }
{ a: b:c } # Error: expected ':'
{ a: 2024-08-13T22:11:09 } # Error: expected ':'
{ :: 1 } # Valid, same as { ':': 1 }
{ ;: 1 } # Valid, same as { ';': 1 }
{ a: || } # Valid, same as { 'a': '||' }
```
Examples of behaviour *after* this PR:
```nu
{ a: b } # (Unchanged) Valid, same as { 'a': 'b' }
{ a: b:c } # Error: colon in bare word specifying record value
{ a: 2024-08-13T22:11:09 } # Valid, same as { a: (2024-08-13T22:11:09) }
{ :: 1 } # Error: colon in bare word specifying record key
{ ;: 1 } # Error: expected item in record key position
{ a: || } # Error: expected item in record value position
```
# Tests + Formatting
I added tests, but I'm not sure if they're sufficient and in the right
place.
# After Submitting
I don't think documentation changes are needed for this, but please let
me know if you disagree.
# Description
This feature tried to connect reedline with the system clipboard for
three special bindings.
To do so it uses the `arboard` crate with heavy dependencies for the
system X or Wayland server or the Windows APIs. We had issues in the
headless CI with it and builds with musl seem to stall.
Removing it from the default build should negatively impact only a small
subset of users aware of the extra bindings. You can still use the
internal clipboard for binding based selection and the terminals extra
bindings to copy arbitrary content into the system clipboard.
For all other users it removes potential sources of failure and a whole
1 MB of release mode binary size (> 2% reduction). Furthermore a
potentially substantial attack surface for Nushell is gone for default
builds.
- Should resolve#13019
- Work in the spirit of #13603
# User-Facing Changes
The `edit` entries
`copyselectionsystem`/`copyselectionsystem`/`pastesystem` for
keybindings are gone in the default build
If you strictly depend on this behavior, you can still build with the
addition of `--features system-clipboard`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
@sholderbach mentioned that I introduced `convert_case` as a dependency
while we already had `heck` for case conversion. So in this PR replaced
the use `convert_case` with `heck`. Mostly I rebuilt the `convert_case`
API with `heck` to work with it as I like the API of `convert_case` more
than `heck`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Nothing changed, the use of `convert_case` wasn't exposed anywhere and
all case conversions are still available.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
No new tests required but my tests in `test_derive` captured some errors
I made while developing this change, (hurray, tests work 🎉)
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Closes#13677
Remove the command `str deunicode`, as it has a narrow application, is
loosely defined by the data provided by the `deunicode` crate and thus a
stabilization liability post-1.0.
Furthermore the data to perform the look-up is quite substantial.
Removing the command and the `deunicode` dependency saves 0.9 MB of
binary data in release mode (~ 2% of total)
(checked via `cargo bloat --release` for a linux x86 build)
# User-Facing Changes
The `str deunicode` command recently added in #13270 is gone
Fixesnushell/nushell#13689
# Description
Respect user-defined `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT`
Additionally I fixed `nu_with_std!()` macro (it was not working
correctly)
# User-Facing Changes
Users now may set `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT` in
`env.nu` and it will work even if `use std` is used after that.
# Tests + Formatting
Added a couple of tests for the new functionality.
# After Submitting
# Description
With Windows Terminal Canary 1.23.240826001-llm, this enables nushell to
query the terminal and receive a response.
The red component here is
```nushell
❯ ("0c0c" | into int -r 16) / 256 | math round | fmt | get lowerhex
0xc
```
This example queries the background and the response is a r/g/b color.
The response really should be
```
␛]11;1;rgb:0c0c/0c0c/0c0c
```
I'm not sure why nushell's input is eating the first part.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Using derived `IntoValue` and `FromValue` implementations on structs
with named fields currently produce `Value::Record`s where each key is
the key of the Rust struct. For records like the `$nu` constant, that
won't work as this record uses `kebab-case` for it's keys. To accomodate
this, I upgraded the `#[nu_value(rename_all = "...")]` helper attribute
to also work on structs with named fields which will rename the keys via
the same case conversion as the enums already have.
# User-Facing Changes
Users of these macros may choose different key styles for their in
`Value` representation.
# Tests + Formatting
I added the same test suite as enums already have and updated the traits
documentation with more examples that also pass the doc test.
# After Submitting
I played around with the `$nu` constant but got stuck at the point that
these keys are kebab-cased, with this, I can play around more with it.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This issue was reported by kira in
[Discord](https://discord.com/channels/601130461678272522/1276981416307069019).
In https://github.com/nushell/nushell/pull/13311, I accidentally made it
so that custom completions are filtered according to the user's
configured completion options (`$env.config.completions`) rather than
the completion options provided as part of the custom completions. This
PR is a quick fix for that.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
It should once again be possible to override match algorithm, case
sensitivity, and substring matching (`positional`) in custom
completions.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a couple tests.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
fdncred and I discussed this in Discord a bit and we thought it might be
better to not allow custom completions to override the user's config.
However, `positional` can't currently be set inside one's config, so you
can only do strict prefix matching, no substring matching. Another PR
could do one of the following:
- Document the fact that you can provide completion options inside
custom completions
- Remove the ability to provide completion options with custom
completions and add a `$env.config.completions.positional: true` option
- Remove the ability to provide completion options with custom
completions and add a new match algorithm `substring` (this is the one I
like most, since `positional` only applies to prefix matching anyway)
Separately from these options, we could also allow completers to specify
that they don't Nushell to do any filtering and sorting on the provided
custom completions.
Mistakes have been made. I forgot about a bunch of `todo`s in the helper
functions. So, this PR replaces them with proper errors. It also adds
tests for parse-time evaluation, because one `todo` I missed was in a
`run_const` function.
Hi there
Here I am using latest tabled.
My tests shows it does fixes panics, but I am wanna be sure.
@fdncred could you verify that it does fixes those panics/errors?
Closes#13405Closes#12786
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently the parser and the documentation generation use the signature
of the command, which means that it doesn't pick up on the changed name
of the `main` block, and therefore shows the name of the command as
"main" and doesn't find the subcommands. This PR changes the
aforementioned places to use the block signature to fix these issues.
This closes#13397. Incidentally it also causes input/output types to be
shown in the help, which is kinda pointless for scripts since they don't
operate on structured data but maybe not worth the effort to remove.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
```
# example.nu
export def main [] { help main }
export def 'main sub' [] { print 'sub' }
```
Before:
After:
# Tests
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests are still missing for the subcommands and the input/output types
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
Based on the discussion in #13419.
## Description
Reworks the `decode`/`encode` commands by adding/changing the following
bases:
- `base32`
- `base32hex`
- `hex`
- `new-base64`
The `hex` base is compatible with the previous version of `hex` out of
the box (it only adds more flags). `base64` isn't, so the PR adds a new
version and deprecates the old one.
All commands have `string -> binary` signature for decoding and `string
| binary -> string` signature for encoding. A few `base64` encodings,
which are not a part of the
[RFC4648](https://datatracker.ietf.org/doc/html/rfc4648#section-6), have
been dropped.
## Example usage
```Nushell
~/fork/nushell> "string" | encode base32 | decode base32 | decode
string
```
```Nushell
~/fork/nushell> "ORSXG5A=" | decode base32
# `decode` always returns a binary value
Length: 4 (0x4) bytes | printable whitespace ascii_other non_ascii
00000000: 74 65 73 74 test
```
## User-Facing Changes
- New commands: `encode/decode base32/base32hex`.
- `encode hex` gets a `--lower` flag.
- `encode/decode base64` deprecated in favor of `encode/decode
new-base64`.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
In this PR I expanded the helper attribute `#[nu_value]` on
`#[derive(FromValue)]`. It now allows the usage of `#[nu_value(type_name
= "...")]` to set a type name for the `FromValue::expected_type`
implementation. Currently it only uses the default implementation but
I'd like to change that without having to manually implement the entire
trait on my own.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users that derive `FromValue` may now change the name of the expected
type.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I added some tests that check if this feature work and updated the
documentation about the derive macro.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
I was working with byte collections like `Vec<u8>` and
[`bytes::Bytes`](https://docs.rs/bytes/1.7.1/bytes/struct.Bytes.html),
both are currently not possible to be used directly in a struct that
derives `IntoValue` and `FromValue` at the same time. The `Vec<u8>` will
convert itself into a `Value::List` but expects a `Value::String` or
`Value::Binary` to load from. I now also implemented that it can load
from `Value::List` just like the other `Vec<uX>` versions. For further
working with byte collections the type `bytes::Bytes` is wildly used,
therefore I added a implementation for it. `bytes` is already part of
the dependency graph as many crates (more than 5000 to crates.io) use
it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
User of `nu-protocol` as library, e.g. plugin developers, can now use
byte collections more easily in their data structures and derive
`IntoValue` and `FromValue` for it.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I added a few tests that check that these byte collections are correctly
translated in and from `Value`. They live in `test_derive.rs` as part of
the `ByteContainer` and I also explicitely tested that `FromValue` for
`Vec<u8>` works as expected.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Maybe it should be explored if `Value::Binary` should use `bytes::Bytes`
instead of `Vec<u8>`.
# Description
`bits rol` and `bits ror` were both undefined for the full byte rotates
and panicked when exceeding the byte rotation range.
`bits ror` further more produced nonsensical results by pulling bits
from the following byte instead of the preceding byte.
Those bugs are now fixed
# User-Facing Changes
Sound Nushell `IncorrectValue` error when exceeding the available bits
# Tests + Formatting
Added the necessary tests
# Description
The meaning of the word usage is specific to describing how a command
function is *used* and not a synonym for general description. Usage can
be used to describe the SYNOPSIS or EXAMPLES sections of a man page
where the permitted argument combinations are shown or example *uses*
are given.
Let's not confuse people and call it what it is a description.
Our `help` command already creates its own *Usage* section based on the
available arguments and doesn't refer to the description with usage.
# User-Facing Changes
`help commands` and `scope commands` will now use `description` or
`extra_description`
`usage`-> `description`
`extra_usage` -> `extra_description`
Breaking change in the plugin protocol:
In the signature record communicated with the engine.
`usage`-> `description`
`extra_usage` -> `extra_description`
The same rename also takes place for the methods on
`SimplePluginCommand` and `PluginCommand`
# Tests + Formatting
- Updated plugin protocol specific changes
# After Submitting
- [ ] update plugin protocol doc
# Description
Fixes#11267
Shifting by a `shift >= num_bits` is undefined in the underlying
operation. Previously we also had an overflow on negative shifts for the
operators `bit-shl` and `bit-shr`
Furthermore I found a severe bug in the implementation of shifting of
`binary` data with the commands `bits shl` and `bits shr`, this
categorically produced incorrect results with shifts that were not
`shift % 4 == 0`. `bits shr` also was able to produce outputs with
different size to the input if the shift was exceeding the length of the
input data by more than a byte.
# User-Facing Changes
It is now an error trying to shift by more than the available bits with:
- `bit-shl` operator
- `bit-shr` operator
- command `bits shl`
- command `bits shr`
# Tests + Formatting
Added testing for all relevant cases
# Description
The previous behaviour of `into record` on lists was to create a new
record with each list index as the key. This was not very useful for
creating meaningful records, though, and most people would end up using
commands like `headers` or `transpose` to turn a list of keys and values
into a record.
This PR changes that instead to do what I think the most ergonomic thing
is, and instead:
- A list of records is merged into one record.
- A list of pairs (two element lists) is folded into a record with the
first element of each pair being the key, and the second being the
value.
The former is just generally more useful than having to use `reduce`
with `merge` for such a common operation, and the latter is useful
because it means that `$a | zip $b | into record` *just works* in the
way that seems most obvious.
Example:
```nushell
[[foo bar] [baz quux]] | into record # => {foo: bar, baz: quux}
[{foo: bar} {baz: quux}] | into record # => {foo: bar, baz: quux}
[foo baz] | zip [bar quux] | into record # => {foo: bar, baz: quux}
```
The support for range input has been removed, as it would no longer
reflect the treatment of an equivalent list.
The following is equivalent to the old behavior, in case that's desired:
```
0.. | zip [a b c] | into record # => {0: a, 1: b, 2: c}
```
# User-Facing Changes
- `into record` changed as described above (breaking)
- `into record` no longer supports range input (breaking)
# Tests + Formatting
Examples changed to match, everything works. Some usage in stdlib and
`nu_plugin_nu_example` had to be changed.
# After Submitting
- [ ] release notes (commands, breaking change)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
@devyn found that https://github.com/nushell/nushell/pull/13595, which
made ranges be type-checked at parse time, introduced a bug that caused
`../foo` to be parsed as a string rather than a command call. This was
caused by `parse_range` returning a `Some` despite there being parse
errors (`/foo` doesn't match `SyntaxShape::Number`). To go back to the
old behavior, `parse_range` now returns `None` anytime there's any parse
errors met while parsing the range.
Unfortunately, this means that something like `..$foo` will be parsed as
a string if `$foo` isn't defined and as a range if it is defined. That
was the behavior before #13595, and it should probably be fixed at some
point, but I'm just trying to quickly fix the bug.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Things should go back to the way they were before #13595, except the
type-checking stuff from that PR is still here.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a test. Reverted another test that tests that `0..<$day` is parsed
successfully as a string if the variable isn't defined.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fixesnushell/nushell#8723
# Description
The example was showing the flag that no longer exists.
# User-Facing Changes
Help no longer shows the example with `-d` flag.
# Tests + Formatting
I trust in CI.
# After Submitting
Nothing.
Fixesnushell/nushell#7995
# Description
This dependency is no longer used by nushell itself.
# User-Facing Changes
None.
# Tests + Formatting
Pased.
# After Submitting
None.
# Description
Prefer process name over executable path. This in practice causes the
`name` column to use just the base executable name.
Also set start_time to nothing on error, because why not.
# User-Facing Changes
Before:
> /opt/google/chrome/chrome
After:
> chrome
Also picks up changes due to `echo test-proc > /proc/$$/comm`.
# Tests + Formatting
No new coverage.
# Description
Fixes issue [12828](https://github.com/nushell/nushell/issues/12828).
When attempting a `polars collect` on an eager dataframe, we return
dataframe as is. However, before this fix I failed to increment the
internal cache reference count. This caused the value to be dropped from
the internal cache when the references were decremented again.
This fix adds a call to cache.get to increment the value before
returning.
# Description
Previously when nushell failed to parse the content type header, it
would emit an error instead of returning the response. Now it will fall
back to `text/plain` (which, in turn, will trigger type detection based
on file extension).
May fix (potentially) nushell/nushell#11927
Refs:
https://discord.com/channels/601130461678272522/614593951969574961/1272895236489613366
Supercedes: #13609
# User-Facing Changes
It's now possible to fetch content even if the server returns an invalid
content type header. Users may need to parse the response manually, but
it's still better than not getting the response at all.
# Tests + Formatting
Added a test for the new behaviour.
# After Submitting
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.3.0 to
2.4.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's
changelog</a>.</em></p>
<blockquote>
<h2>2.4.0</h2>
<ul>
<li>Added methods <code>IndexMap::append</code> and
<code>IndexSet::append</code>, moving all items from
one map or set into another, and leaving the original capacity for
reuse.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="b66bbfe282"><code>b66bbfe</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/337">#337</a>
from cuviper/append</li>
<li><a
href="a288bf3b3a"><code>a288bf3</code></a>
Add a README note for <code>ordermap</code></li>
<li><a
href="0b2b4b9a78"><code>0b2b4b9</code></a>
Release 2.4.0</li>
<li><a
href="8c0a1cd4be"><code>8c0a1cd</code></a>
Add <code>append</code> methods</li>
<li>See full diff in <a
href="https://github.com/indexmap-rs/indexmap/compare/2.3.0...2.4.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [shadow-rs](https://github.com/baoyachi/shadow-rs) from 0.30.0 to
0.31.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/baoyachi/shadow-rs/releases">shadow-rs's
releases</a>.</em></p>
<blockquote>
<h2>[Improvement] Correct git command directory</h2>
<p>ref: <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/170">#170</a></p>
<p>Thx <a
href="https://github.com/MichaelScofield"><code>@MichaelScofield</code></a></p>
<h2>Make build_with function public</h2>
<p>ref:<a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/169">#169</a></p>
<p>Thx <a
href="https://github.com/MichaelScofield"><code>@MichaelScofield</code></a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="aa804ec8a2"><code>aa804ec</code></a>
Update Cargo.toml</li>
<li><a
href="b3fbe36403"><code>b3fbe36</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/170">#170</a>
from MichaelScofield/find-right-branch</li>
<li><a
href="fe6f940f8b"><code>fe6f940</code></a>
execute "git" command in the right path</li>
<li><a
href="458be25e74"><code>458be25</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/169">#169</a>
from MichaelScofield/flexible-for-submodule</li>
<li><a
href="1521a288b4"><code>1521a28</code></a>
Expose the "build" function to let projects with submodules
control where to ...</li>
<li><a
href="ee12741fa0"><code>ee12741</code></a>
Merge pull request <a
href="https://redirect.github.com/baoyachi/shadow-rs/issues/168">#168</a>
from baoyachi/issue/149</li>
<li><a
href="dfb8b24adb"><code>dfb8b24</code></a>
cargo fmt</li>
<li><a
href="a3be8680aa"><code>a3be868</code></a>
fix clippy</li>
<li><a
href="c8e7cd5704"><code>c8e7cd5</code></a>
Fix compilation failures caused by unwrap</li>
<li>See full diff in <a
href="https://github.com/baoyachi/shadow-rs/compare/v0.30.0...v0.31.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
@sholderbach pointed out that I could've made this error message better.
So, here's my attempt to make it better.
This should work. I had a hard time figuring out how to trigger the
error anyway because the type checker doesn't allow "bad" parameters to
begin with.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes glob to take either a string or a glob as a parameter.
Closes#13611
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is meant to provide a more helpful error message when using http
get and the content type can't be parsed.
### Before
### After
The span isn't perfect but there's no way to get the span of the content
type that I can see.
In the middle of fixing this error, I also discovered how to fix the
problem in general. Since you can now see the error message complaining
about double quotes (char 22 at position 0. 22 hex is `"`). The fix is
just to remove all the double quotes from the content_type and then you
get this.
### After After
The discussion on Discord about this is that `--raw` or
`--ignore-errors` should eat this error and it "just work" as well as
default to text or binary when the mime parsing fails. I agree but this
PR does not implement that.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13479
# User-Facing Changes
Given the following setup:
```
cd /tmp
touch src_file.txt
ln -s src_file.txt link1
```
### Before
```
ls -lf link1 | get target.0 # It outputs src_file.txt
```
### After
```
ls -lf link1 | get target.0 # It outputs /tmp/src_file.txt
```
# Tests + Formatting
Added a test for the change
# Description
The original code assumed a full single-string command line could be
split by space to get the original argv.
# User-Facing Changes
Fixes an issue where `ps` would display incomplete process name if it
contained space(s).
# Tests + Formatting
Fixes existing code, no new coverage. Existing code doesn't seem to be
covered, we could be it would be somewhat involved and the fix was
simple, so didn't bother..
# Description
As part of fixing https://github.com/nushell/nushell/issues/13586, this
PR checks the types of the operands when creating a range. Stuff like
`0..(glob .)` will be rejected at parse time. Additionally, `0..$x` will
be treated as a range and rejected if `x` is not defined, rather than
being treated as a string. A separate PR will need to be made to do
reject streams at runtime, so that stuff like `0..(open /dev/random)`
doesn't hang.
Internally, this PR adds a `ParseError::UnsupportedOperationTernary`
variant, for when you have a range like `1..2..(glob .)`.
# User-Facing Changes
Users will now receive an error if any of the operands in the ranges
they construct have types that aren't compatible with `Type::Number`.
Additionally, if a piece of code looks like a range but some parse error
is encountered while parsing it, that piece of code will still be
treated as a range and the user will be shown the parse error. This
means that a piece of code like `0..$x` will be treated as a range no
matter what. Previously, if `x` weren't the expression would've been
treated as a string `"0..$x"`. I feel like it makes the language less
complicated if we make it less context-sensitive.
Here's an example of the error you get:
```
> 0..(glob .)
Error: nu::parser::unsupported_operation
× range is not supported between int and any.
╭─[entry #1:1:1]
1 │ 0..(glob .)
· ─────┬─────┬┬
· │ │╰── any
· │ ╰── int
· ╰── doesn't support these values
╰────
```
And as an image:
Note: I made the operands themselves (above, `(glob .)`) be garbage,
rather than the `..` operator itself. This doesn't match the behavior of
the math operators (if you do `1 + "foo"`, `+` gets highlighted red).
This is because with ranges, the range operators aren't `Expression`s
themselves, so they can't be turned into garbage. I felt like here, it
makes more sense to highlight the individual operand anyway.
# Description
Fixes: #13253
The issue is because nushell use `parse_value` to parse named args, but
`parse_value` doesn't parse `OneOf` syntax shape.
# User-Facing Changes
`OneOf` in named args should works again.
# Tests + Formatting
I think it's hard to add a test, because nushell doesn't support `oneof`
syntax in custom command yet.
# After Submitting
NaN
# Description :
- This pull request addresses issue #13594 where any substring of the
path that matches the home directory is replaced with `~` in the title
bar. This was problematic because partial matches within the path were
also being replaced.
---------
Signed-off-by: Aakash788 <aakashparmar788@gmail.com>
Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
# Description
Fixes Issue #13477
This adds a check to see if a user is trying to invoke a
(non-executable) file as a command and returns a helpful error if so.
EDIT: this will not work on Windows, and is arguably not relevant there,
because of the different semantics of executables. I think the
equivalent on Windows would be if a user tries to invoke `./foo`, we
should look for `foo.exe` or `foo.bat` in the directory and recommend
that if it exists.
# User-Facing Changes
When a user invokes an unrecognized command that is the path to an
existing file, the error used to say:
`{name} is neither a Nushell built-in or a known external command`
This PR proposes to change the message to:
`{name} refers to a file that is not executable. Did you forget to to
set execute permissions?`
# Tests + Formatting
Ran cargo fmt, clippy and test on the workspace.
EDIT: added test asserting the new behavior
# Description
Something I meant to add a long time ago. We currently don't have a
convenient way to print raw binary data intentionally. You can pipe it
through `cat` to turn it into an unknown stream, or write it to a file
and read it again, but we can't really just e.g. generate msgpack and
write it to stdout without this. For example:
```nushell
[abc def] | to msgpack | print --raw
```
This is useful for nushell scripts that will be piped into something
else. It also means that `nu_plugin_nu_example` probably doesn't need to
do this anymore, but I haven't adjusted it yet:
```nushell
def tell_nushell_encoding [] {
print -n "\u{0004}json"
}
```
This happens to work because 0x04 is a valid UTF-8 character, but it
wouldn't be possible if it were something above 0x80.
`--raw` also formats other things without `table`, I figured the two
things kind of go together. The output is kind of like `to text`.
Debatable whether that should share the same flag, but it was easier
that way and seemed reasonable.
# User-Facing Changes
- `print` new flag: `--raw`
# Tests + Formatting
Added tests.
# After Submitting
- [ ] release notes (command modified)
# Description
As per our Wednesday meeting, this adds a parse error when something
that would be parsed as an external call is present at the top level,
unless the head of the external call begins with a caret (to make it
explicit).
I tried to make the error quite descriptive about what should be done.
# User-Facing Changes
These now cause a parse error:
```nushell
$foo = bar
$foo = `bar`
```
These would have been interpreted as strings before this version, but
now they'd be interpreted as external calls. This behavior is consistent
with `let`/`mut` (which is unaffected by this change).
Here is an example of the error:
```
Error: × External command calls must be explicit in assignments
╭─[entry #3:1:8]
1 │ $foo = bar
· ─┬─
· ╰── add a caret (^) before the command name if you intended to run and capture its output
╰────
help: the parsing of assignments was changed in 0.97.0, and this would have previously been treated as a string.
Alternatively, quote the string with single or double quotes to avoid it being interpreted as a command name. This
restriction may be removed in a future release.
```
# Tests + Formatting
Tests added to cover the change. Note made about it being temporary.
# Description
Cleanups:
- Add "key_press" to event reading function names to match reality
- Move the relevant comment about why only key press events are
interesting one layer up
- Remove code duplication in handle_events
- Make `try_next` try harder (instead of bail on a boring event); I
think that was the original intention
- Remove recursion from `next` (I think that's clearer? but maybe just
what I'm used to)
# User-Facing Changes
None
# Tests + Formatting
This cleans up existing code, no new test coverage.
# Description
This pull request merges `polars sink` and `polars to-*` into one
command `polars save`.
# User-Facing Changes
- `polars to-*` commands have all been replaced with `polars save`. When
saving a lazy frame to a type that supports a polars sink operation, a
sink operation will be performed. Sink operations are much more
performant, performing a collect while streaming to the file system.
This PR closes [Issue
#13482](https://github.com/nushell/nushell/issues/13482)
# Description
This PR tend to make all math function to be constant.
# User-Facing Changes
The math commands now can be used as constant methods.
### Some Example
```
> const MODE = [3 3 9 12 12 15] | math mode
> $MODE
╭───┬────╮
│ 0 │ 3 │
│ 1 │ 12 │
╰───┴────╯
> const LOG = [16 8 4] | math log 2
> $LOG
╭───┬──────╮
│ 0 │ 4.00 │
│ 1 │ 3.00 │
│ 2 │ 2.00 │
╰───┴──────╯
> const VAR = [1 3 5] | math variance
> $VAR
2.6666666666666665
```
# Tests + Formatting
Tests are added for all of the math command to test there constant
behavior.
I mostly focused on the actual user experience, not the correctness of
the methods and algorithms.
# After Submitting
I think this change don't require any additional documentation. Feel
free to correct me in this topic please.
# Description
This exposes the `LazyFrame::sink_*` functionality to allow a streaming
collect directly to the filesystem. This useful when working with data
that is too large to fit into memory.
# User-Facing Changes
- Introduction of the `polars sink` command
# Description
Prior this pull request `polars first` and `polars last` would collect a
lazy frame into an eager frame before performing operations. Now `polars
first` will to a `LazyFrame::limit` and `polars last` will perform a
`LazyFrame::tail`. This is really useful in working with very large
datasets.
# Description
When opening a dataframe the default operation will be to create a lazy
frame if possible. This works much better with large datasets and
supports hive format.
# User-Facing Changes
- `--lazy` is nolonger a valid option. `--eager` must be used to
explicitly open an eager dataframe.
# Description
By popular demand (a.k.a.
https://github.com/nushell/nushell.github.io/issues/1035), provide an
example of a type signature in the `def` help.
# User-Facing Changes
Help/Doc
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib
# After Submitting
N/A
