Commit Graph

6776 Commits

Author SHA1 Message Date
Antoine Stevan
2492165fcb
FEATURE: print example command results in the help (#8189)
Should close #8035.

> **Note**
> this is my first technical PR for `nushell`
> - i might very well miss things
> - i tried to be as complete as possible about the changes
> - please require further changes if i did something wrong, i'm open to
any remark 😌

# Description
this PR adds, when it is defined in the `examples` method of the
`Command` implementations, the output of the examples to the output of
the `help` command.

this PR
- only modifies `crates/nu-engine/src/documentation.rs` and the
`get_documentation` function
- defines a new `WD` constant to print a **W**hite **D**immed `...`
- a `match` statement at the end of the example loop to
- print a white dimmed `...` when the example is not set, i.e. set to
`None` in the `examples` method of the `Command` implementation of a
command
- pretty print the output of the associated example `Value` when it has
been defined

> **Warning**
> LIMITATIONS:
> - i use snippets from `crates/nu-protocol/src/pipeline_data.rs`
> - the table creation from `pub PipelineData::print`, i.e. the `let
decl_id = ...;` and `let table = ...;` in the change
> - the table item printing from `PipelineData::write_all_and_flush`,
i.e. the `for item in table { ... }`
>
> ADDRESSED:
> - ~~the formatting of the output is not perfect and has to be fully
left aligned with the first column for now~~ (fixed with
[`5abeefd558c34ba9bae15e2f183ff4625442921e`..`a62be1b5a2c730959da5dbc028bb91ffe5093f63`](5abeefd558c34ba9bae15e2f183ff4625442921e..a62be1b5a2c730959da5dbc028bb91ffe5093f63))
> - ~~i'm using `.unwrap()` on both the changes above, not sure how to
handle this for now~~ (fixed for now thanks to 49f1dc080)
> - ~~the tests and `clippy` checks do not pass for now, see below~~
(`clippy` now is happy with 49f1dc080 and the tests pass with
11666bc715)

# User-Facing Changes
the output of the `help <command>` command is now augmented with the
outputs of the examples, when they are defined.
- `with-env`
```bash
> help with-env
...
Examples:
  Set the MYENV environment variable
  > with-env [MYENV "my env value"] { $env.MYENV }
  my env value

  Set by primitive value list
  > with-env [X Y W Z] { $env.X }
  Y

  Set by single row table
  > with-env [[X W]; [Y Z]] { $env.W }
  Z

  Set by key-value record
  > with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
  ╭───┬───╮
  │ 0 │ Y │
  │ 1 │ Z │
  ╰───┴───╯
```
instead of the previous
```bash
> help with-env
...
Examples:
  Set the MYENV environment variable
  > with-env [MYENV "my env value"] { $env.MYENV }

  Set by primitive value list
  > with-env [X Y W Z] { $env.X }

  Set by single row table
  > with-env [[X W]; [Y Z]] { $env.W }

  Set by key-value record
  > with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
- `merge`
```bash
> help merge
...
Examples:
  Add an 'index' column to the input table
  > [a b c] | wrap name | merge ( [1 2 3] | wrap index )
  ╭───┬──────╮
  │ # │ name │
  ├───┼──────┤
  │ 1 │ a    │
  │ 2 │ b    │
  │ 3 │ c    │
  ╰───┴──────╯

  Merge two records
  > {a: 1, b: 2} | merge {c: 3}
  ╭───┬───╮
  │ a │ 1 │
  │ b │ 2 │
  │ c │ 3 │
  ╰───┴───╯

  Merge two tables, overwriting overlapping columns
  > [{columnA: A0 columnB: B0}] | merge [{columnA: 'A0*'}]
  ╭───┬─────────┬─────────╮
  │ # │ columnA │ columnB │
  ├───┼─────────┼─────────┤
  │ 0 │ A0*     │ B0      │
  ╰───┴─────────┴─────────╯
```
instead of the previous
```bash
> help merge
...
Examples:
  Add an 'index' column to the input table
  > [a b c] | wrap name | merge ( [1 2 3] | wrap index )

  Merge two records
  > {a: 1, b: 2} | merge {c: 3}

  Merge two tables, overwriting overlapping columns
  > [{columnA: A0 columnB: B0}] | merge [{columnA: 'A0*'}]
```
2023-02-26 21:05:11 +01:00
Doru
c602b5a1e8
special-case ExternalStream in bytes starts-with (#8203)
# Description
`bytes starts-with` converts the input into a `Value` before running
.starts_with to find if the binary matches. This has two side effects:
it makes the code simpler, only dealing in whole values, and simplifying
a lot of input pipeline handling and value transforming it would
otherwise have to do. _Especially_ in the presence of a cell path to
drill into. It also makes buffers the entire input into memory, which
can take up a lot of memory when dealing with large files, especially if
you only want to check the first few bytes (like for a magic number).

This PR adds a special branch on PipelineData::ExternalStream with a
streaming version of starts_with.

# User-Facing Changes
Opening large files and running bytes starts-with on them will not take
a long time.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# Drawbacks
Streaming checking is more complicated, and there may be bugs. I tested
it with multiple chunks with string data and binary data and it seems to
work alright up to 8k and over bytes, though.

The existing `operate` method still exists because the way it handles
cell paths and values is complicated. This causes some "code
duplication", or at least some intent duplication, between the value
code and the streaming code. This might be worthwhile considering the
performance gains (approaching infinity on larger inputs).

Another thing to consider is that my ExternalStream branch considers
string data as valid input. The operate branch only parses Binary
values, so it would fail. `open` is kind of unpredictable on whether it
returns string data or binary data, even when passing `--raw`. I think
this can be a problem but not really one I'm trying to tackle in this
PR, so, it's worth considering.
2023-02-26 15:17:44 +01:00
pwygab
9bbb9711e4
allow for arguments in EDITOR and VISUAL env vars (#8105)
# Description

Fixes #8051.

# User-Facing Changes

You can now put command arguments into the EDITOR and VISUAL config /
env variables.

# Tests + Formatting

I don't know how to write tests for this. However, I set $env.EDITOR to
"nvim -R" and it seemed to work.

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-26 06:56:38 -06:00
Antoine Stevan
680405e527
REFACTOR: format some example commands (#8223)
hellord 👋 😋 

# Description
this PR fixes the format of a few single-line examples and the
indentation of some multi-line examples
- single-line example formatting
  - `compact`
- multi-line example indentation
  - `update cells`
  - `error make
  - `split-by`

# User-Facing Changes
- `compact`

from
```bash
Examples:
  Filter out all records where 'Hello' is null (returns nothing)
  > [["Hello" "World"]; [null 3]]| compact Hello

  Filter out all records where 'World' is null (Returns the table)
  > [["Hello" "World"]; [null 3]]| compact World
```
to
```bash
Examples:
  Filter out all records where 'Hello' is null (returns nothing)
  > [["Hello" "World"]; [null 3]] | compact Hello

  Filter out all records where 'World' is null (Returns the table)
  > [["Hello" "World"]; [null 3]] | compact World
```
- `update cells`

from
```bash
Examples:
  Update the zero value cells to empty strings.
  > [
    ["2021-04-16", "2021-06-10", "2021-09-18", "2021-10-15", "2021-11-16", "2021-11-17", "2021-11-18"];
    [          37,            0,            0,            0,           37,            0,            0]
] | update cells { |value|
      if $value == 0 {
        ""
      } else {
        $value
      }
}

  Update the zero value cells to empty strings in 2 last columns.
  > [
    ["2021-04-16", "2021-06-10", "2021-09-18", "2021-10-15", "2021-11-16", "2021-11-17", "2021-11-18"];
    [          37,            0,            0,            0,           37,            0,            0]
] | update cells -c ["2021-11-18", "2021-11-17"] { |value|
        if $value == 0 {
          ""
        } else {
          $value
        }
}
```
to
```bash
Examples:
  Update the zero value cells to empty strings.
  > [
        ["2021-04-16", "2021-06-10", "2021-09-18", "2021-10-15", "2021-11-16", "2021-11-17", "2021-11-18"];
        [          37,            0,            0,            0,           37,            0,            0]
    ] | update cells { |value|
          if $value == 0 {
            ""
          } else {
            $value
          }
    }

  Update the zero value cells to empty strings in 2 last columns.
  > [
        ["2021-04-16", "2021-06-10", "2021-09-18", "2021-10-15", "2021-11-16", "2021-11-17", "2021-11-18"];
        [          37,            0,            0,            0,           37,            0,            0]
    ] | update cells -c ["2021-11-18", "2021-11-17"] { |value|
            if $value == 0 {
              ""
            } else {
              $value
            }
    }
```
- `split-by`

from
```bash
Examples:
  split items by column named "lang"
  >
                {
                    '2019': [
                      { name: 'andres', lang: 'rb', year: '2019' },
                      { name: 'jt', lang: 'rs', year: '2019' }
                    ],
                    '2021': [
                      { name: 'storm', lang: 'rs', 'year': '2021' }
                    ]
                } | split-by lang
```
to
```bash
Examples:
  split items by column named "lang"
  > {
        '2019': [
          { name: 'andres', lang: 'rb', year: '2019' },
          { name: 'jt', lang: 'rs', year: '2019' }
        ],
        '2021': [
          { name: 'storm', lang: 'rs', 'year': '2021' }
        ]
    } | split-by lang
```
- `error make`

from
```bash
Examples:
  Create a custom error for a custom command
  > def foo [x] {
      let span = (metadata $x).span;
      error make {msg: "this is fishy", label: {text: "fish right here", start: $span.start, end: $span.end } }
    }

  Create a simple custom error for a custom command
  > def foo [x] {
      error make {msg: "this is fishy"}
    }
```
to
```bash
Examples:
  Create a custom error for a custom command
  > def foo [x] {
        let span = (metadata $x).span;
        error make {msg: "this is fishy", label: {text: "fish right here", start: $span.start, end: $span.end } }
    }

  Create a simple custom error for a custom command
  > def foo [x] {
        error make {msg: "this is fishy"}
    }
```

# Tests + Formatting
no tests have been changed => this is a pure formatting PR

- ✔️ `cargo fmt --all`
- ✔️ `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- ✔️ `cargo test --workspace`

# After Submitting
need to change the book? 🤔
2023-02-26 06:50:05 -06:00
pwygab
44595b44c5
add case insensitive switch to starts-with and ends-with (#8221)
# Description

Fixes #8202

# User-Facing Changes
`str starts-with` and `str ends-with` now has a `-i` switch.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-26 06:48:09 -06:00
Stefan Holderbach
b27c7702f9
Test more datatypes in nuon (#8211)
# Description

While working on #8210 I noticed that we did not explicitly check a
number of `Value` variants for proper serialization and deserialization.


- Test filesize in `to/from nuon`
- Test duration in `from/to nuon`
- Test datetime in `from/to nuon`
- Test graceful failure of closure in `to nuon`


# User-Facing Changes

(-)

# Tests + Formatting

All about them tests
2023-02-25 19:26:34 +01:00
Kovacsics Robert
378a3ae05f
Use with-env to avoid calling external command on invalid command (#8209)
# Description

My terminal emulator happens to be called `st`
(https://st.suckless.org/) which breaks these tests for me

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-25 09:36:51 -08:00
Stefan Holderbach
836a56b347
Revert range expansion for to nuon (#8210)
# Description

The code to generate the nuon format supports writing range literals,
which obviates the need to expand the range as added in #8047

# User-Facing Changes

`to nuon` will still output ranges as literals

# Tests + Formatting

- Add test for `to nuon` range output
- Add `from nuon` test for range
2023-02-25 18:29:30 +01:00
Stefan Holderbach
b36ac8f2f8
Try to test similar things in coverage (#8056)
# Description

- Try to run `cargo test` with out narrowing.
- Remove restrictions around plugins -> include plugin tests

# User-Facing Changes

None

# Tests + Formatting

Qualifying test suite unchanged
2023-02-25 17:04:42 +01:00
baehyunsol
b1e7bb899a
Update trim_.rs (#8201)
fix typo in help messages


# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
2023-02-24 22:18:20 -08:00
alesito85
7c285750c7
Fixes autocomplete when using sudo (#8094)
# Description

This PR addresses issue #2047 in order to enable autocomplete
functionality when using sudo for executing commands. I'e done a couple
of auxiliary checks such as ignoring whitespace and the last pipe in
order to determine the last command.

# User-Facing Changes

The only user facing change should be the autocomplete working.

# Tests + Formatting

All tests and formatting pass.

# Screenshots

<img width="454" alt="image"
src="https://user-images.githubusercontent.com/4399118/219404037-6cce4358-68a9-42bb-a09b-2986b10fa6cc.png">

# Suggestions welcome

I still don't know the in's and out's if nushell very well, any
suggestions for improvements are welcome.
2023-02-24 15:05:36 -08:00
Jakub Žádník
e93a8b1d32
Move profiling metadata collecting to function (#8198) 2023-02-25 00:29:07 +02:00
David Matos
42f0b55de0
allow Range to expand to array-like when converting to json (#8047)
# Description
Fixes #8002, which expands ranges `1..3` to expand to array-like when
saving and converting to json. Now,

```
> 1..3 | save foo.json
# foo.json
[
    1,
    2,
    3
]


> 1..3 | to json
[
    1,
    2,
    3
]
```
# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-24 15:31:33 -06:00
Henry Jetmundsen
253b223e65
pipe binary data to external commands (#8058)
Fixes #7615 

# Description

When calling external commands, we create a table from the pipeline data
to handle external commands expecting paginated input. When a binary
value is made into a table, we convert the vector of bytes representing
the binary bytes into a pretty formatted string. This results in the
pretty formatted string being sent to external commands instead of the
actual binary bytes. By checking whether the stdout of the call is being
redirected, we can decide whether to send the raw binary bytes or the
pretty formatted output when creating a table command.

# User-Facing Changes

When passing binary values to external commands, the external command
will receive the actual bytes instead of the pretty printed string. Use
cases that don't involve piping a binary value into an external command
are unchanged.


![new_behavior](https://user-images.githubusercontent.com/32406734/218349172-24cd12f2-d563-4957-bdf1-6aa804b174b2.png)

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

cargo fmt --all -- --check to check standard code formatting (cargo fmt
--all applies these changes)
cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect to check that you're using the standard code
style
    cargo test --workspace to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-24 21:39:52 +01:00
Hofer-Julian
85bfdca578
Force install in install-all scripts (#8194)
Otherwise, one has to remove old installations manually
2023-02-24 11:54:19 -06:00
Alex Tremblay
4dd9d0d46b
move hash md5 and hash sha256 commands to the hash category (#8196)
# Description

For auto-generated documentation, move the `hash _` commands into the
Hash category

# User-Facing Changes

Apart from documentation, none.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-24 11:53:25 -06:00
Darren Schroeder
fd1ac5106d
fix ansi example so it is tested (#8192)
# Description

This PR just fixes one `ansi` test so that the test runner will accept
it and test the scenario. No other changes.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-24 11:52:51 -06:00
Ryan Devenney
b572b4ecbd
remove links to ShellError and ParseError docs - #8167 (#8193)
# Description

issue #8167

Remove the `(link)` to the docs for `ShellError` and `ParseError`. As
per discussion on the issue, the nu-parser version didn't update on the
docs causing deadlinks for those errors, which brought the usefullness
of these links into question and it was decided to remove all of them
that `derive(diagnostic)`.

# User-Facing Changes
Before:
```
/home/rdevenney/projects/open_source/nushell〉ls | get name}
Error: nu::parser::unbalanced_delimiter (link)

  × Unbalanced delimiter.
   ╭─[entry #1:1:1]
 1 │ ls | get name}
   ·              ▲
   ·              ╰── unbalanced { and }
   ╰────
```

After:
```
/home/rdevenney/projects/open_source/nushell〉ls | get name}
Error: nu::parser::unbalanced_delimiter

  × Unbalanced delimiter.
   ╭─[entry #1:1:1]
 1 │ ls | get name}
   ·              ▲
   ·              ╰── unbalanced { and }
   ╰────
```

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-24 09:26:31 -08:00
Michael Angerman
585e104608
Cratification: Break out nu_cmd_lang into a separate crate (#8181)
# Description

This breaks out the core_commands into a separate crate called
nu_cmd_lang

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-24 09:54:42 -06:00
Stefan Holderbach
d0aefa99eb
Disable Windows coverage tracking for now (#8190)
# Description

Avoids running out of disk through additional files after cratification
on Windows.

Revert as soon as we reduced the binary or test footprint.

Will mess with the coverage values without change in test suite as we
only track the linux conditional compilation

Should resolve the CI failure for #8181 

# User-Facing Changes

None

# Tests + Formatting

Altered coverage value thresholds might be the result
2023-02-24 13:05:05 +01:00
Stefan Holderbach
728e95c52b
Add links to the remaining README badges (#8191)
Quicklinks to metrics. When we are proud to display them as badges,
let's show of the underlying statistics as well. Also helpful to quickly
get to the actions.
2023-02-24 12:58:44 +01:00
Jérémy Audiger
83087e0f9d
HTTP HEAD / PATCH / PUT / DELETE commands (#8144)
# Description

Based on https://github.com/nushell/nushell/pull/8135.

Add the remaining HTTP commands:

- Head
- Patch
- Put
- Delete

It should finally resolve the issue
https://github.com/nushell/nushell/issues/2741

# User-Facing Changes

New sub HTTP commands.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-23 17:52:12 -06:00
Darren Schroeder
3fb1e37473
remove old winget manual release ci (#8177)
# Description

This PR removes the old winget manual release ci. With the updated
winget release, we're able to specify the version we want to push to
winget manually in case it fails. You just choose the `Submit Nushell
package to Windows Package Manager Community Repository` action, click
the run workflow and specify the tag.


![image](https://user-images.githubusercontent.com/343840/220924670-411dd683-0d17-490a-901b-bf2a49d7fa77.png)


# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-23 08:36:56 -06:00
Darren Schroeder
9890966fa4
update the manual msi generation instructions for winget (#8178)
# Description

Yet another winget failure and yet another update of the manual msi
generation instructions for winget releases.

# User-Facing Changes

N/A
2023-02-23 08:19:13 -06:00
Alex Saveau
aba0fb0000
Compress $HOME into ~ in prompt (#8173) 2023-02-22 16:36:26 -06:00
WindSoilder
0e86ba4b63
Dependency update: update notify version to v5 (#8114)
# Description

Relative: #8060

While investigating, I found we need to update notify, which is a good
step to remove some duplicate dependencies.

As title, here are some goods and bads after updating:

## Good
keep dependency up to date, and remove duplidate dependency(cfg-if,
winapi) in Cargo.lock.

## Bad
Introduce some breaking changes:
After updating to notify v5, I found that we have to remove `Rename`
events.

But I've testing under notify v4, and it doesn't work good if we running
the following command on MacOS:
```
touch a
mv a b
```
It fires file create event, but no file rename event. So `rename` event
is not really reliable, so I think it's ok for us to remove `Rename`
events.

The reason to remove `--debounce-ms` flag:
It's not provided by defualt file watcher, we can use
[PollWatcher](https://docs.rs/notify/latest/notify/poll/struct.PollWatcher.html),
but it scans filesystem, which is really expensive. So I just remove the
flag.

# User-Facing Changes

1. `--debounce-ms` flag is removed
2. no longer watch `Rename` event.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 13:35:09 -08:00
Xoffio
fc23c6721a
cp progress bar implementation (#8012)
# NOTE
Clean duplicate of #7825
Sorry about all the mess guys... I got confuse with GitHub and and ended
up mankind that mess.
This the same code I just cleaned the commits.

# Description
Progress bar implementation for the `cp` command. Now if the flag `-p`
or `--progress` is set, then the user will be able to see the progress
of the file or files being copy


![progressbar_cp01](https://user-images.githubusercontent.com/38369407/213899494-0f6a4aa9-ee82-48c3-a1f1-1816f3fc1d9c.jpg)

![progressbar_cp02](https://user-images.githubusercontent.com/38369407/213899497-2f9e6e8c-fdd9-400b-bd8d-c59899ae0368.jpg)

# User-Facing Changes
A new flag (`--progress` `-p`) was added to the `cp` command 
Examples:
```nu
cp -p test_file.txt test_folder_1\
cp -r -p test_folder\* test_folder_1\
cp -r -p -i test_folder\* test_folder_1\
```

## Notes 
- The progress bar uses `std::io::{Read, Write}` instead of
`std::fs::copy` to get the progress. that means that when the progress
bar is used the copy process might be a bit slower.
- Progress bar for symbolic links TBD: Since symbolic links are usually
very light I think is not worth it to duplicate the function
`copy_symlink` just to add a progress bar that will be so fast to the
point is not needed, but.. for consistency purposes we might need to
added it, In that case I would have to pass the variable `progress` by
parameter (to not duplicate code unnecessary). If I do that i would have
to pass the `progress` var to every function to respect `copy_impl: impl
Fn(PathBuf, PathBuf, Span)`. Please let me know if this is not clear :p

---------

Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
2023-02-22 11:57:38 -08:00
Yethal
f4a129a792
Added examples to query web plugin (#8171)
# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: Yethal <nosuchemail@email.com>
2023-02-22 19:01:15 +00:00
Maxim Zhiburt
8deecc0137
table --collapse dont do truncation return message instead (#8172)
Reverts #8042

I've just noticed that #8042 was merged, but I didn't addressed your
@fdncred last comment.
This PR reverts #8042 and returns a message in cases where we need
truncation/wrapping.


157b7e0b60/crates/nu-command/tests/commands/table.rs (L234-L240)

Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
2023-02-22 18:35:45 +00:00
WindSoilder
c7966e81c2
check external failed in let assignment (#8164)
# Description

Fixes: #8136

# User-Facing Changes

The following command

```
let VAR = ^cat non-existing-file; echo "failed"
```
will no longer output `failed` message


# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
2023-02-22 17:35:09 +00:00
Ryan Devenney
2659c359e9
interrupt input command with Ctrl + C (#8159)
# Description

GH Issue: [#8074](https://github.com/nushell/nushell/issues/8074)

Adding SIGINT Ctrl + C functionality to *most* of the `input` command.
`input` with the flags `--suppress-output` and `--bytes-until` are
executed in raw mode which allows a ^C signal to be caught as it's
input, but an "optionless" call of `input` is using a standard
`read_line()` method that takes a ^C input and clears the buffer of any
data collected before the ^C. I'm more than happy to alter the
"optionless" call but putting it in raw mode hides the user input, so at
the moment that's unchanged.

# User-Facing Changes

Now ^C anywhere in the stdin stream will cause the command to SIGINT (as
long as the command isn't optionless), rather than being read in as part
of the input.
```
/home/rdevenney/projects/open_source/nushell〉input --suppress-output
Error: nu:🐚:io_error (link)

  × I/O error
  help: SIGINT
```

```
/home/rdevenney/projects/open_source/nushell〉input --bytes-until "a"
Error: nu:🐚:io_error (link)

  × I/O error
  help: SIGINT

```

As mentioned above, the default input behavior is the same.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 17:19:19 +00:00
Artemiy
e389e51b2b
Display empty records and lists (#7925)
# Description

Fix some issues related to #7444 
1. Empty lists and records are now displayed as a small notice in a box:

![image](https://user-images.githubusercontent.com/17511668/215832023-3f8d743a-2899-416f-9109-7876ad2bbedf.png)

![image](https://user-images.githubusercontent.com/17511668/215832273-c737b8a4-af33-4c16-8dd3-bd4f0fd19b5a.png)
2. Empty records are now correctly displayed if inside of another record
list or table:

![image](https://user-images.githubusercontent.com/17511668/215832597-00f0cebc-a3b6-4ce8-8373-a9340d4c7020.png)

![image](https://user-images.githubusercontent.com/17511668/215832540-ab0e2a14-b8f6-4f47-976c-42003b622ef6.png)
3. Fixed inconsistent coloring of empty list placeholder inside of
lists/tables:

![image](https://user-images.githubusercontent.com/17511668/215832924-813ffe17-e04e-4301-97c3-1bdbccf1825c.png)

![image](https://user-images.githubusercontent.com/17511668/215832963-4765c4cf-3036-4bcc-81e1-ced941fa47cb.png)


# User-Facing Changes

`table` command now displays empty records and lists like a table with
text and correctly displays empty records inside tables and lists.

New behavior of displaying empty lists and records can be disabled using
`table.show_empty` config option.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 16:18:33 +00:00
Maxim Zhiburt
0ab6b66d8f
nu-table/ Fix --collapse wrap/truncate [WIP] (#8042)
close #8034

So it's actually a work around to do "our best".

We basically try 3 attemps to build a table with each time truncating
values bigger then (termwidth/2, termwidth/4, termwidth/8).

PS1: The logic is kind of not ideal need to think about it.

_______________

PS2:
I've just noticed that multi-line key behaves strangely; (not sure
whether it's caused by this wrap (unlikely))
Need to investigate this.

I'd bet it's a multiline key.


![image](https://user-images.githubusercontent.com/20165848/218267237-6b7ee9af-675a-428e-92cd-65808cec50f0.png)

---------

Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
2023-02-22 14:10:17 +00:00
WindSoilder
8608d8d873
remove git completion in default config (#8087)
# Description

As title, making default config simpler, and user can get custom
completion from here:
https://github.com/nushell/nu_scripts/tree/main/custom-completions Or
using carapace
# User-Facing Changes


# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 13:05:21 +00:00
Ryan Devenney
d34a2c353f
files and directory completions now use ascending ordering rather than Levenshtein. #8023 (#8085)
# Description

This change sorts completions for files and directories by the ascending
ordering method, related to issue:
[#8023](https://github.com/nushell/nushell/issues/8023)

Currently the Suggestions are being sorted twice, so it's now following
the convention from `completion/base.rs` to match on the
`self.get_sort_by()` result.

# User-Facing Changes

Previously the suggestions were being sorted by the Levenshtein method:
```
/home/rdevenney/projects/open_source/nushell| cd
src/                wix/                docs/               tests/
assets/             crates/             docker/             images/
target/             benches/            pkg_mgrs/           .git/
.cargo/             .github/
```

Now when you tab for autocompletions, they show up in ascending
alphabetical order as shown below (with hidden files/folders at the
end).
```
/home/rdevenney/projects/open_source/nushell| cd
assets/             benches/            crates/             docker/
docs/               images/             pkg_mgrs/           src/
target/             tests/              wix/                .cargo/
.git/               .github/
```

And when you've already typed a bit of the path:
```
/home/rdevenney/projects/open_source/nushell| cd crates/nu
crates/nu-cli/                   crates/nu-color-config/          crates/nu-command/
crates/nu-engine/                crates/nu-explore/               crates/nu-glob/
crates/nu-json/                  crates/nu-parser/                crates/nu-path/
crates/nu-plugin/                crates/nu-pretty-hex/            crates/nu-protocol/
crates/nu-system/                crates/nu-table/                 crates/nu-term-grid/
crates/nu-test-support/          crates/nu-utils/                 crates/nu_plugin_custom_values/
crates/nu_plugin_example/        crates/nu_plugin_formats/        crates/nu_plugin_gstat/
crates/nu_plugin_inc/            crates/nu_plugin_python/         crates/nu_plugin_query/
```

And another for when there are files and directories present:
```
/home/rdevenney/projects/open_source/nushell/crates/nu-cli/src| nvim                              02/16/2023 08:22:16 AM
commands.rs          completions/         config_files.rs      eval_file.rs
lib.rs               menus/               nu_highlight.rs      print.rs
prompt.rs            prompt_update.rs     reedline_config.rs   repl.rs
syntax_highlight.rs  util.rs              validation.rs
```

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

[*] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
[*] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
[*] `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 13:03:48 +00:00
Leon
150b0b6b86
Add select extra_usage explaining relationship to get (#8146)
# Description

See title.

Also changed some misleading wording in `reject`'s help.

# User-Facing Changes

See above.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 13:00:16 +00:00
Mango The Fourth
d0e0701a88
fix: fix lexing of comments, such that a#b becomes a coherent Item (#8151)
# Description

Previously `nix run nixpkgs#hello` was lexed as `Item, Item, Item,
Comment`, however, `#hello` is *not* supposed to be a comment here and
should be parsed as part of the third `Item`.

This change introduces this behavior by not interrupting the parse of
the current token upon seeing a `#`.

Thank you so much for considering this, I think many `nix` users will be
grateful for this change and I think this will lead to more adaptation
in the ecosystem.

- closes #8137 and #6335 

# User-Facing Changes

- code like `somecode# bla` and `somecode#bla` will not be parsed as
`somecode, comment` but as `somecode#bla`, hence this is a breaking
change for all users who didn't put a space before a comment introducing
token (`#`)

# Tests + Formatting

I've added tests that cover this behavior in `test_lex.rs`

- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass

# After Submitting

> If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

I think this is expected behavior in most other shells, so the
documentation was lacking for not documenting the unexpected behavior
before and hence now is automatically more complete >D
2023-02-22 12:59:47 +00:00
Mango The Fourth
28b20c5ec3
chore: add a couple of direnv specific files to the gitignore (#8165)
# Description

Hi, I would like to add a couple of things to the `.gitignore` that
would probably not be preferred to be checked out.

Thanks in advance! :) 

# User-Facing Changes

- none

# Tests + Formatting

- not affected

# After Submitting

- not affected
2023-02-22 12:58:06 +00:00
dependabot[bot]
9088ef182e
Bump errno from 0.2.8 to 0.3.0 (#8131)
Bumps [errno](https://github.com/lambda-fairy/rust-errno) from 0.2.8 to
0.3.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/lambda-fairy/rust-errno/blob/main/CHANGELOG.md">errno's
changelog</a>.</em></p>
<blockquote>
<h1>[0.3.0] - 2023-02-12</h1>
<ul>
<li>
<p>Add haiku support
<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/pull/42">#42</a></p>
</li>
<li>
<p>Add AIX support
<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/pull/54">#54</a></p>
</li>
<li>
<p>Add formatting with <code>#![no_std]</code>
<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/pull/44">#44</a></p>
</li>
<li>
<p>Switch from <code>winapi</code> to <code>windows-sys</code> <a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/pull/55">#55</a></p>
</li>
<li>
<p>Update minimum Rust version to 1.48
<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/pull/48">#48</a>
<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/pull/55">#55</a></p>
</li>
<li>
<p>Upgrade to Rust 2018 edition <a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/pull/59">#59</a></p>
</li>
<li>
<p>wasm32-wasi: Use <code>__errno_location</code> instead of
<code>feature(thread_local)</code>. <a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/pull/66">#66</a></p>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="e1882701f6"><code>e188270</code></a>
Release 0.3.0</li>
<li><a
href="3983d26f98"><code>3983d26</code></a>
Add <a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/issues/66">#66</a>
to changelog</li>
<li><a
href="362d7c6c35"><code>362d7c6</code></a>
Update windows-sys requirement from 0.42 to 0.45 (<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/issues/67">#67</a>)</li>
<li><a
href="b8cc39bb8d"><code>b8cc39b</code></a>
wasm32-wasi: Use <code>__errno_location</code> instead of
<code>feature(thread_local)</code>. (<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/issues/66">#66</a>)</li>
<li><a
href="dbd02cf02f"><code>dbd02cf</code></a>
Replace deprecated <code>trim_right</code> with <code>trim_end</code>
(<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/issues/65">#65</a>)</li>
<li><a
href="c999f38356"><code>c999f38</code></a>
Add comparison with <code>std::io::Error</code></li>
<li><a
href="8a4c62af22"><code>8a4c62a</code></a>
Bump actions/checkout from 2 to 3 (<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/issues/64">#64</a>)</li>
<li><a
href="04379ae703"><code>04379ae</code></a>
Add Dependabot (<a
href="https://github-redirect.dependabot.com/lambda-fairy/rust-errno/issues/63">#63</a>)</li>
<li><a
href="18e34d3895"><code>18e34d3</code></a>
Setup caching for CI</li>
<li><a
href="81c3ba4cba"><code>81c3ba4</code></a>
Run clippy in CI</li>
<li>Additional commits viewable in <a
href="https://github.com/lambda-fairy/rust-errno/compare/v0.2.8...v0.3.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=errno&package-manager=cargo&previous-version=0.2.8&new-version=0.3.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-02-22 12:56:31 +00:00
Jérémy Audiger
c4d1aa452d
Final rework for the HTTP commands (#8135)
# Description

Final rework for https://github.com/nushell/nushell/issues/2741, after
this one, we'll add for free HTTP PUT, PATCH, DELETE and HEAD.

# User-Facing Changes

We can now post data using HTTP GET. I add some examples in the output
of `http get --help` to demonstrate this new behavior.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 12:56:11 +00:00
sitiom
66e52b7cfc
use winget releaser action for manifest submission (#8070)
# Description

Other than simplifying the CI, [Winget
Releaser](https://github.com/vedantmgoyal2009/winget-releaser) includes
more metadata in the manifest as it uses
[Komac](https://github.com/russellbanks/Komac).

I recommend installing [Pull](https://github.com/apps/pull) on
https://github.com/fdncred/winget-pkgs to automatically keep it up to
date.

If you want to see an example of a PR created using this action, see
[microsoft/winget-pkgs/pulls (Pull request has been created with WinGet
Releaser)](https://github.com/microsoft/winget-pkgs/pulls?q=is%3Apr+sort%3Aupdated-desc+Pull+request+has+been+created+with+WinGet+Releaser).

> Migrate from [winget-pkgs-automation
manifest](https://github.com/vedantmgoyal2009/vedantmgoyal2009/blob/main/winget-pkgs-automation/packages/n/nushell.nushell.json)
2023-02-22 12:54:15 +00:00
Darren Schroeder
e761954cf0
allow different types of lists to be appended (#8157)
# Description

closes #8153

This PR allows different types of lists, like `list<string>` and
`list<any>` to be appended with the `++=` operator.

## Before

```
mut args = [ hello ("hello" | path join world)]
$args ++= [ foo bar ]
Error: nu::parser::type_mismatch (link)

  × Type mismatch during operation.
   ╭─[entry #2:1:1]
 1 │ $args ++= [ foo bar ]
   ·           ─────┬─────
   ·                ╰── expected list<any>, found list<string>
   ╰────
```

## After

```
mut args = [ hello ("hello" | path join world)]
$args ++= [ foo bar ]
$args
╭───┬─────────────╮
│ 0 │ hello       │
│ 1 │ hello\world │
│ 2 │ foo         │
│ 3 │ bar         │
╰───┴─────────────╯
```

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 12:53:36 +00:00
Darren Schroeder
58829e3560
fixes a def parsing bug with a default list (#8096)
# Description

This PR fixes a bug where a default list in a custom command parameter
wasn't being accepted. The reason was because it was comparing specific
types of list like `list<any>` != `list<string>`. So, this PR attempts
to fix that.

### Before

```
> def f [param: list = [one]] { echo $param }
Error: nu::parser::assignment_mismatch (link)

  × Default value wrong type
   ╭─[entry #1:1:1]
 1 │ def f [param: list = [one]] { echo $param }
   ·                      ──┬──
   ·                        ╰── default value not list<any>
   ╰────
```

### After

```
> def f [param: list = [one]] {echo $param}
> f
╭───┬─────╮
│ 0 │ one │
╰───┴─────╯
```

closes #8092 

# User-Facing Changes



# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 12:53:11 +00:00
WindSoilder
62652cf8c1
simplify parse_expression function code. (#8149)
# Description

When reading parser code to see how it works, I found that
`parse_expression` function contains some duplicate code about function
call, we can match several values at once to simplify code

# User-Facing Changes

None

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 12:14:20 +00:00
Leon
4482862a40
Fix one error message in into string (#8163)
# Description

Fixes the following message:
```
〉(ls).0 | into string
Error: nu:🐚:cant_convert (link)

  × Can't convert to record.
   ╭─[entry #4:1:1]
 1 │ (ls).0 | into string
   ·          ─────┬─────
   ·               ╰── can't convert string to record
   ╰────
  help: try using the `to nuon` command
```

# User-Facing Changes

See above.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-22 09:05:19 +00:00
JT
d80ba00590
delete stale.yml 2023-02-22 21:54:54 +13:00
dependabot[bot]
81dd4a8450
Bump uuid from 1.2.2 to 1.3.0 (#8130)
Bumps [uuid](https://github.com/uuid-rs/uuid) from 1.2.2 to 1.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/uuid-rs/uuid/releases">uuid's
releases</a>.</em></p>
<blockquote>
<h2>1.3.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Fix error message. by <a
href="https://github.com/basbossink-ds"><code>@​basbossink-ds</code></a>
in <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/656">uuid-rs/uuid#656</a></li>
<li>implement Arbitrary::size_hint by <a
href="https://github.com/Ekleog"><code>@​Ekleog</code></a> in <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/657">uuid-rs/uuid#657</a></li>
<li>Always use hyphenated format regardless of flags by <a
href="https://github.com/KodrAus"><code>@​KodrAus</code></a> in <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/658">uuid-rs/uuid#658</a></li>
<li>Update windows-sys requirement from 0.42.0 to 0.45.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/654">uuid-rs/uuid#654</a></li>
<li>Prepare for 1.3.0 release by <a
href="https://github.com/KodrAus"><code>@​KodrAus</code></a> in <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/659">uuid-rs/uuid#659</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a
href="https://github.com/basbossink-ds"><code>@​basbossink-ds</code></a>
made their first contribution in <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/656">uuid-rs/uuid#656</a></li>
<li><a href="https://github.com/Ekleog"><code>@​Ekleog</code></a> made
their first contribution in <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/pull/657">uuid-rs/uuid#657</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/uuid-rs/uuid/compare/1.2.2...1.3.0">https://github.com/uuid-rs/uuid/compare/1.2.2...1.3.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="573362627c"><code>5733626</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/659">#659</a>
from uuid-rs/cargo/1.3.0</li>
<li><a
href="59ac047014"><code>59ac047</code></a>
prepare for 1.3.0 release</li>
<li><a
href="e010787850"><code>e010787</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/654">#654</a>
from uuid-rs/dependabot/cargo/windows-sys-0.45.0</li>
<li><a
href="b90b820603"><code>b90b820</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/658">#658</a>
from uuid-rs/fix/alternate-format</li>
<li><a
href="1af8269957"><code>1af8269</code></a>
fix up tests around alternative format</li>
<li><a
href="e7eaf5b4a2"><code>e7eaf5b</code></a>
always use hyphenated format regardless of flags</li>
<li><a
href="52197cd275"><code>52197cd</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/657">#657</a>
from Ekleog/arbitrary-size-hint</li>
<li><a
href="b362542ee2"><code>b362542</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/uuid-rs/uuid/issues/656">#656</a>
from basbossink-ds/fix/655-deserialize-error-msg</li>
<li><a
href="212b902277"><code>212b902</code></a>
implement Arbitrary::size_hint</li>
<li><a
href="40d8711f11"><code>40d8711</code></a>
Also fix the doc comment</li>
<li>Additional commits viewable in <a
href="https://github.com/uuid-rs/uuid/compare/1.2.2...1.3.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=uuid&package-manager=cargo&previous-version=1.2.2&new-version=1.3.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-02-21 23:32:52 +00:00
Hofer-Julian
101ed629a4
Update polars to 0.27.2 (#8154)
Mostly to get rid of https://github.com/pola-rs/polars/pull/6098/files

This currently breaks nushell's table formatting:

```
nu ❯  open-df forcing.arrow | first
could not mmap compressed IPC file, defaulting to normal read╭───┬──────────┬────┬────────┬──────────┬───────┬──────────┬──────┬──────────┬─────╮
│ # │   time   │ id │ demand │ drainage │ E_pot │ infiltra │  P   │ priority │ ... │
│   │          │    │        │          │       │ tion     │      │          │     │
├───┼──────────┼────┼────────┼──────────┼───────┼──────────┼──────┼──────────┼─────┤
│ 0 │ 4 years  │  1 │   0.00 │     0.02 │  0.00 │     0.00 │ 0.00 │     4.00 │ ... │
│   │ ago      │    │        │          │       │          │      │          │     │
╰───┴──────────┴────┴────────┴──────────┴───────┴──────────┴──────┴──────────┴─────╯
```

@visr
2023-02-21 23:32:28 +00:00
Stefan Holderbach
95ec2fcce7
Update to 0.76.1 version for development (#8161)
# Description

For tracking in `version` for bug reports during development. Might be
used for an urgent hotfix if necessary.
2023-02-21 23:21:39 +00:00
Stefan Holderbach
73bc3389e5
Fix Cargo.toml of nu_plugin_formats (#8160)
# Description


The crate manifest didn't include vital information to publish to
crates.io

This now includes the basic description and license information
2023-02-21 22:44:52 +00:00