# Description
Fixes#14000 by once again calling `set_current_dir()`, but doing so
with the `cwd` from the current state, rather than the (previously
removed) argument to `merge_env()`.
# User-Facing Changes
Bug fix
# Tests + Formatting
If this looks good, I'll look at adding a test case for it.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
VSCode OSC 633 needs particular string escaping to function properly. I
missed some escapes during my initial implementation. This PR should
cover the escapes I missed originally.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes a small side-issue in #10977 - If a command flag didn't have a
comment/description, it would still show an unnecessary separator at the
end of the line.
This fixes that, plus uses the `: ` (colon) to separate the flag from
the description. This aligns with the way that named parameters are
handled.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
This PR addresses #13676 . It adds completions for the operators listed
on https://www.nushell.sh/lang-guide/chapters/operators.html#operators
based on the type of the value before the cursor. Currently, values
created as the output of other operations will not have completions. For
example `(1 + 3)` will not have completions. When operators are
added/removed/updated the completions will have to be adjusted manually.
# User-Facing Changes
- Tab completions for operators
# Tests
Added unit tests to the new completion struct OperationCompletion for
int completions, float completions, and str completions
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
fixes#13518
This pr escapes file/directory names, which start with a dollar sign
since it's being interpreted as a variable.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
@kubouch noticed that the warning message from #13842 when using a
"Shells" alias mentioned `config.nu`, but he's using it in the prompt
which means loading it in `env.nu`. Updated the warning message to:
> ... feature, and to remove this warning, please add the following
> to your startup configuration (typically env.nu or config.nu):
# User-Facing Changes
No change in functionality - More clear instructions, hopefully.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Doc and release notes still to be updated for #13842
Updates Ctrl+p to open the ide_completion menu and otherwise advance to
the "previous" menu item.
Ctrl+n opens the ide_completion_menu and subsequently advances to the
"next" menu item. Ctrl+p should share this behavior for the "previous"
menu item. See nushell/nushell#13946 for detailed discussion.
Tested by building and running nushell without a custom config, falling
back to this default config.
Hi there;
I do think it must be fixed.
I also did improve performance for a fraction in case of header on
border.
I want to believe :) I didn't bench it.
But we didn't cached the width in this code branch before.
Which was causing all data reestimation.
close#13966
cc: @fdncred
Original stated it filled on the left to a width of 5 while showing the
command and output to fill on both sides to a width of 10. Changed
wording of description to match effect of example and displayed result.
# Description
I mean't to do this small change the other day but forgot. We probably
shouldn't be using MAIN_SEPARATOR because **\\*.rs is an illegal glob.
So, update this to just use slash.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Updated summary for commit
[612e0e2](612e0e2160)
- While folks are welcome to read through the entire comments, the core
information is summarized here.
# Description
This PR drastically improves startup times of Nushell by only parsing a
single submodule of the Standard Library that provides the `banner` and
`pwd` commands. All other Standard Library commands and submodules are
parsed when imported by the user. This cuts startup times by more than
60%.
At the moment, we have stopped adding to `std-lib` because every
addition adds a small amount to the Nushell startup time.
With this change, we should once again be able to allow new
functionality to be added to the Standard Library without it impacting
`nu` startup times.
# User-Facing Changes
* Nushell now starts about 60% faster
* Breaking change: The `dirs` (Shells) aliases will return a warning
message that it will not be auto-loaded in the following release, along
with instructions on how to restore it (and disable the message)
* The `use std <submodule> *` syntax is available for convenience, but
should be avoided in scripts as it parses the entire `std` module and
all other submodules and places it in scope. The correct syntax to
*just* load a submodule is `use std/<submodule> *` (asterisk optional).
The slash is important. This will be documented.
* `use std *` can be used for convenience to load all of the library but
still incurs the full loading-time.
* `std/dirs`: Semi-breaking change. The `dirs` command replaces the
`show` command. This is more in line with the directory-stack
functionality found in other shells. Existing users will not be impacted
by this as the alias (`shells`) remains the same.
* Breaking-change: Technically a breaking change, but probably only
impacts maintainers of `std`. The virtual path for the standard library
has changed. It could previously be imported using its virtual path (and
technically, this would have been the correct way to do it):
```nu
use NU_STDLIB_VIRTUAL_DIR/std
```
The path is now simply `std/`:
```nu
use std
```
All submodules have moved accordingly.
# Timings
Comparisons below were made:
* In a temporary, clean config directory using `$env.XDG_CONFIG_HOME =
(mktemp -d)`.
* `nu` was run with a release build
* `nu` was run one time to generate the default `config.nu` (etc.) files
- Otherwise timings would include the user-prompt
* The shell was exited and then restarted several times to get timing
samples
(Note: Old timings based on 0.97 rather than 0.98, but in the range of
being accurate)
| Scenario | `$nu.startup-time` |
| --- | --- |
| 0.97.2
([aaaab8e](aaaab8e070))
Without this PR | 23ms - 24ms |
| This PR with deprecated commands | 9ms - <11ms |
| This PR after deprecated commands are removed in following release |
8ms - <10ms |
| Final PR (remove deprecated), using `--no-std-lib` | 6.1ms to 6.4ms |
| Final PR (remove deprecated), using `--no-config-file` | 3.1ms - 3.6ms
|
| Final PR (remove deprecated), using `--no-config-file --no-std-lib` |
1ms - 1.5ms |
*These last two timings point to the opportunity for further
optimization (see comment in thread below (will link once I write it).*
# Implementation details for future maintenance
* `use std banner` is a ridiculously deceptive call. That call parses
and imports *all* of `std` into scope. Simply replacing it with `use
std/core *` is essentially what saves ~14-15ms. This *only* imports the
submodule with the `banner` and `pwd` commands.
* From the code-comments, the reason that `NU_STDLIB_VIRTUAL_DIR` was
used as a prefix was so that there wouldn't be an issue if a user had a
`./std/mod.nu` in the current directory. This does **not** appear to be
an issue. After removing the prefix, I tested with both a relative
module as well as one in the `$env.NU_LIB_DIRS` path, and in all cases
the *internal* `std` still took precedence.
* By removing the prefix, users can now `use std` (and variants) without
requiring that it already be parsed and in scope.
* In the next release, we'll stop autoloading the `dirs` (shells)
functionality. While this only costs an additional 1-1.5ms, I think it's
better moved to the `config.nu` where the user can optionally remove it.
The main reason is its use of aliases (which have also caused issues) -
The `n`, `p`, and `g` short-commands are valuable real-estate, and users
may want to map these to something else.
For this release, there's an `deprecated_dirs` module that is still
autoloaded. As with the top-level commands, use of these will give a
deprecation warning with instructions on how to handle going forward.
To help with this, moved the aliases to their own submodule inside the
`dirs` module.
* Also sneaks in a small change where the top-level `dirs` command is
now the replacement for `dirs show`
* Fixed a double-import of `assert` in `dirs.nu`
* The `show_banner` step is replaced with simply `banner` rather than
re-importing it.
* A `virtual_path` may now be referenced with either a forward-slash or
a backward-slash on Windows. This allows `use std/<submodule>` to work
on all platforms.
# Performance side-notes:
* Future parsing and/or IR improvements should improve performance even
further.
* While the existing load time penalty of `std-lib` was not noticeable
on many systems, Nushell runs on a wide-variety of hardware and OS
platforms. Slower platforms will naturally see a bigger jump in
performance here. For users starting multiple Nushell sessions
frequently (e.g., `tmux`, Zellij, `screen`, et. al.) it is recommended
to keep total startup time (including user configuration) under ~250ms.
# Tests + Formatting
* All tests are green
* Updated tests:
- Removed the test that confirmed that `std` was loaded (since we
don't).
- Removed the `shells` test since it is not autoloaded. Main `dirs.nu`
functionality is tested through `stdlib-test`.
- Many tests assumed that the library was fully loaded, because it was
(even though we didn't intend for it to be). Fixed those tests.
- Tests now import only the necessary submodules (e.g., `use
std/assert`, rather than `use std assert`)
- Some tests *thought* they were loading `std/log`, but were doing so
improperly. This was masked by the now-fixed "load-everything-into-scope
bug". Local CI would pass due the `$env.NU_LOG_<...>` variables being
inherited from the calling process, but would fail in the "clean" GitHub
CI environment. These tests have also been fixed.
* Added additional tests for the changes
# After Submitting
Will update the Standard Library doc page
# Description
Title says it all, changes `EngineState::get_env_var` to return a
`Option<&'a Value>` instead of an owned `Option<Value>`. This avoids
some unnecessary clones.
I also made a similar change to the `PluginExecutionContext` trait.
# Description
Fixes#13949 where `$env.LAST_EXIT_CODE` was not being set for internal
errors.
# Tests + Formatting
Cannot test due to limitations with the `nu_repl` test bin.
# Description
This fixes an issue with converting to a dataframe when specifying a
struct in the schema. Things like the following now work correctly:
```nushell
[[foo bar]; [{a: "a_0", b:"b_0"} 1] [{a: "a_1", b: "b_1" } 2]] | polars into-df -s {foo: {a: str, b: str}, bar: u8}
```
Bumps [tempfile](https://github.com/Stebalien/tempfile) from 3.12.0 to
3.13.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Stebalien/tempfile/blob/master/CHANGELOG.md">tempfile's
changelog</a>.</em></p>
<blockquote>
<h2>3.13.0</h2>
<ul>
<li>Add <code>with_suffix</code> constructors for easily creating new
temporary files with a specific suffix (e.g., a specific file
extension). Thanks to <a
href="https://github.com/Borgerr"><code>@Borgerr</code></a>.</li>
<li>Update dependencies (fastrand & rustix).</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="a354f8cb11"><code>a354f8c</code></a>
chore: release 3.13.0</li>
<li><a
href="d21b602fa2"><code>d21b602</code></a>
chore: update deps</li>
<li><a
href="d6600da8fc"><code>d6600da</code></a>
Add for <code>with_suffix</code> (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/299">#299</a>)</li>
<li><a
href="19280c5889"><code>19280c5</code></a>
Document current default permissions for tempdirs (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/296">#296</a>)</li>
<li><a
href="c5eac9f690"><code>c5eac9f</code></a>
fix: address clippy unnecessary deref lint in test (<a
href="https://redirect.github.com/Stebalien/tempfile/issues/294">#294</a>)</li>
<li>See full diff in <a
href="https://github.com/Stebalien/tempfile/compare/v3.12.0...v3.13.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [once_cell](https://github.com/matklad/once_cell) from 1.19.0 to
1.20.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/matklad/once_cell/blob/master/CHANGELOG.md">once_cell's
changelog</a>.</em></p>
<blockquote>
<h2>1.20.1</h2>
<ul>
<li>Allow using <code>race</code> module using just
<code>portable_atomic</code>, without <code>critical_section</code> and
provide
better error messages on targets without atomic CAS instruction,
<a
href="https://redirect.github.com/matklad/once_cell/pull/265">#265</a>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="3b9bd9b872"><code>3b9bd9b</code></a>
release 1.20.1</li>
<li><a
href="f61508a632"><code>f61508a</code></a>
Merge pull request <a
href="https://redirect.github.com/matklad/once_cell/issues/265">#265</a>
from taiki-e/portable-atomic</li>
<li><a
href="449e5d7b2d"><code>449e5d7</code></a>
Add portable-atomic feature and disable portable-atomic/critical-section
by d...</li>
<li><a
href="72f7c2e5fa"><code>72f7c2e</code></a>
Merge pull request <a
href="https://redirect.github.com/matklad/once_cell/issues/260">#260</a>
from brodycj/propagate-critical-section-to-portable-a...</li>
<li><a
href="be6b6238fb"><code>be6b623</code></a>
v1.20.0</li>
<li><a
href="f2d95bfe79"><code>f2d95bf</code></a>
update Cargo (dev-)dependencies; update Cargo.lock.msrv</li>
<li><a
href="dd6b5c2909"><code>dd6b5c2</code></a>
ci: fix TEST_BETA with TEMPORARY WORKAROUND in RUSTFLAGS</li>
<li><a
href="7317eae758"><code>7317eae</code></a>
add <code>cargo test --workspace</code> to beginning of TEST task</li>
<li><a
href="bd54bf7aff"><code>bd54bf7</code></a>
fix default-features flag for parking_lot_core in dependencies</li>
<li><a
href="bb70b9e7e6"><code>bb70b9e</code></a>
cargo fmt updates</li>
<li>Additional commits viewable in <a
href="https://github.com/matklad/once_cell/compare/v1.19.0...v1.20.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
As with #13985, credit to @AlifianK for suggesting this in
https://github.com/nushell/nushell.github.io/pull/1572
Updates the example in `wrap` to not use 1-based, sequential numbers.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
All credit to @AlifianK for suggesting this in the doc repo
(https://github.com/nushell/nushell.github.io/pull/1571).
This updates the merge example to make it more clear by using a
different set of numbers that can't easily be confused with an `index`.
Also changes the `index` to `id` to remove the "magic column name
conversion". (#13780).
# User-Facing Changes
Help/Doc change only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
Bumps
[actions-rust-lang/setup-rust-toolchain](https://github.com/actions-rust-lang/setup-rust-toolchain)
from 1.10.0 to 1.10.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/releases">actions-rust-lang/setup-rust-toolchain's
releases</a>.</em></p>
<blockquote>
<h2>v1.10.1</h2>
<ul>
<li>Fix problem matcher for rustfmt output.
The format has changed since <a
href="https://redirect.github.com/rust-lang/rustfmt/pull/5971">rust-lang/rustfmt#5971</a>
and now follows the form "filename:line".
Thanks to <a
href="https://github.com/0xcypher02"><code>@0xcypher02</code></a> for
pointing out the problem.</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1...v1.10.1">https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1...v1.10.1</a></p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/blob/main/CHANGELOG.md">actions-rust-lang/setup-rust-toolchain's
changelog</a>.</em></p>
<blockquote>
<h2>[1.10.1] - 2024-10-01</h2>
<ul>
<li>Fix problem matcher for rustfmt output.
The format has changed since <a
href="https://redirect.github.com/rust-lang/rustfmt/pull/5971">rust-lang/rustfmt#5971</a>
and now follows the form "filename:line".
Thanks to <a
href="https://github.com/0xcypher02"><code>@0xcypher02</code></a> for
pointing out the problem.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="11df97af8e"><code>11df97a</code></a>
Update the rustfmt problem matcher</li>
<li>See full diff in <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1.10.0...v1.10.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
In the PR #13832 I used some newtypes for the old IDs. `SpanId` and
`RegId` already used newtypes, to streamline the code, I made them into
the same style as the other marker-based IDs.
Since `RegId` should be a bit smaller (it uses a `u32` instead of
`usize`) according to @devyn, I made the `Id` type generic with `usize`
as the default inner value.
The question still stands how `Display` should be implemented if even.
# User-Facing Changes
Users of the internal values of `RegId` or `SpanId` have breaking
changes but who outside nushell itself even uses these?
# After Submitting
The IDs will be streamlined and all type-safe.
# Description
This PR allows bools to be type checked against each other.
I looked for test and maybe we don't have any for type checked math
stuff. I didn't see any.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
closes https://github.com/nushell/nushell/issues/13759 and fixes some
odd behavior from the human-date-parser crate.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is related #11950 and serves as another potential fix alongside
rolling it back with https://github.com/nushell/nushell/pull/13959. The
idea here is to try and properly setup the input and output console
modes. I searched through a log of GitHub code to come up with this,
including deno, wezterm, conpty, among others. It seems to work but it
would be great if someone else would be able to test. I added comments
from the consoleapi.h from windows to know what the other flags are in
case we need to make other changes.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
In this PR I replaced most of the raw usize IDs with
[newtypes](https://doc.rust-lang.org/rust-by-example/generics/new_types.html).
Some other IDs already started using new types and in this PR I did not
want to touch them. To make the implementation less repetitive, I made
use of a generic `Id<T>` with marker structs. If this lands I would try
to move make other IDs also in this pattern.
Also at some places I needed to use `cast`, I'm not sure if the type was
incorrect and therefore casting not needed or if actually different ID
types intermingle sometimes.
# User-Facing Changes
Probably few, if you got a `DeclId` via a function and placed it later
again it will still work.
# Description
Old code was comparing remaining positional arguments with total number
of arguments, where it should've compared remaining positional with
with remaining arguments of any kind. This means that if a function was
given too few arguments, `calculate_end_span` would believe that it
actually had too many arguments, since after parsing the first few
arguments, the number of remaining arguments needed were fewer than the
*total* number of arguments, of which we had used several.
Fixes#9072
Fixes: https://github.com/nushell/nushell/issues/13930
Fixes: https://github.com/nushell/nushell/issues/12069
Fixes: https://github.com/nushell/nushell/issues/8385
Extracted from #10381
## Bonus
It also improves the error handling on missing positional arguments
before keywords (no longer crashing since #9851). Instead of just giving
the keyword to the parser for the missing positional, we give an
explicit error about a missing positional argument. I would like better
descriptions than "missing var_name" though, but I'm not sure if that's
available without
Old error
```
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #1:1:1]
1 │ let = if foo
· ┬
· ╰── expected valid variable name
╰────
```
New error
```
Error: nu::parser::missing_positional
× Missing required positional argument.
╭─[entry #18:1:1]
1 │ let = foo
· ┬
· ╰── missing var_name
╰────
help: Usage: let <var_name> = <initial_value>
```
# User-Facing Changes
The program `alias = = =` is no longer accepted by the parser
# Description
@cptpiepmatz and I ran into a problem where `toolkit check pr` and
`toolkit clippy --verbose` wouldn't work. I tracked it down to me using
`cargo-completions.nu` out of the nu_scripts repo. It was redefining
`cargo clippy`. The fix was to ensure that all `cargo` commands in
`toolkit.nu` use the external `^cargo`.
Specifically, the problem with `cargo clippy` in `cargo-completions.nu`
is it didn't seem to allow `-- -D blah` type parameters.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Introduces a new flag `--truncate-ragged-lines` for `polars open` that
will truncate lines that are longer than the schema.
# User-Facing Changes
- Introduction of the flag `--truncate-ragged-lines` for `polars open`
# Description
This request exposes the prelude::polars::len expression. It is ended
for doing fast select count(*) like operations:
<img width="626" alt="Screenshot 2024-09-26 at 18 14 45"
src="https://github.com/user-attachments/assets/74285fc6-f99c-46e0-9226-9a7d41738d78">
# User-Facing Changes
- Introduction of the `polars len` command
# Description
Implements #13669
When nu is started for the first time, the directory represented by
`$nu.default-config-dir` typically will not exist. In this case, Nushell
will create the directory. It will then detect that either or both
`config.nu`/`env.nu` don't exist and offer to create them.
(Existing behavior) If the user declines, the directory will still be
created (since the history file lives there as well). The
`default_config.nu` and `default_env.nu` will be loaded.
On subsequent launches, as long as the config directory continues to
exist, the user will not be prompted to recreate the config files.
Nushell will behave as if the user answered "N" to the prompt in that
`default_config.nu` and `default_env.nu` will be used.
The user can still create a `config.nu` or `env.nu` at any point, and
that will be used. In that case, `default_config.nu` and/or
`default_env.nu` will no longer be loaded (unless and until #13671 is
implemented).
# User-Facing Changes
User will no longer be prompted to create config files if they are
missing so long as the config directory exists.
## Before this change:
1. Nushell starts for the first time
2. The directory where config files are stored does not exist
3. The config files do not exist
* User is asked whether they want to create `env.nu`
- User says, "Y", `default_env.nu` is copied to the directory as
`env.nu` (and directory is created if needed)
- User says, "n", `default_env.nu` is loaded, but no file on the
filesystem is created.
* User is asked whether they want to create `config.nu`
- User says, "Y", `default_config.nu` is copied to the directory as
`config.nu` (and directory is created if needed)
- User says, "n", `default_config.nu` is loaded, but no file on the
filesystem is created.
4. The next time `nu` is run, if either file is missing, the user will
be prompted again for that file.
## After this change:
Steps 1 - 3 remains the same.
4. The next time `nu` is run, we check if the directory exists. If so:
5. Do not prompt user to create any missing files **(New Behavior)**
6. `$nu.default-config-dir/env.nu` exists?
* Yes? Use it. (Normal behavior)
* No? Evaluate `default_env.nu`. (Normal behavior)
* No file is created on the filesystem
7. `$nu.default-config-dir/config.nu` exists?
* Yes? Use it. (Normal behavior)
* No? Evaluate `default_config.nu` (Normal behavior)
* No file is created on the filesystem
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
This behavior isn't currently mentioned in the configuration doc. I'll
probably hold off on changing anything in the doc until #13671 is
implemented. Regardless, given the timing, this won't make it into a
release for at least 4 weeks.
Notable this gets https://github.com/bytecodealliance/rustix/pull/1147
which makes things work on Android again.
Without this update latest `0.98.0` release gets stuck in a loop
outputting the below error due to the `TCGETS2` usage:
> Error: Os { code: 13, kind: PermissionDenied, message: "Permission
denied" }
# Description
After PR https://github.com/nushell/nushell/pull/12953, LS_COLORS
coloring broke in the `grid` and `ls` commands because the full path to
the files were not available. This PR restores the coloring.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR sets the current working directory to the location of the
Nushell executable at startup, using `std::env::set_current_dir()`. This
is desirable because after PR
https://github.com/nushell/nushell/pull/12922, we no longer change our
current working directory even after `cd` is executed, and some OS might
lock the directory where Nushell started.
The location of the Nushell executable is chosen because it cannot be
removed while Nushell is running anyways, so we don't have to worry
about OS locking it.
This PR has the side effect that it breaks buggy command even harder.
I'll keep this PR as a draft until these commands are fixed, but it
might be helpful to pull this PR if you're working on fixing one of
those bugs.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
Fixesnushell/nushell#13891
# Description
`input listen` now respects `$env.config.use_kitty_protocol`
This is essentially a copy-paste from `keybindings listen` where it was
already implemented.
# User-Facing Changes
`input listen` now respects `$env.config.use_kitty_protocol`
# Tests + Formatting
# After Submitting
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
This PR updates the `folder_depth` algorithm in order to make `glob` a
bit faster. The algorithm works like this. Since `folder_depth` is
always used we need to set it to a value. If the glob pattern contains
`**` then make `folder_depth` `usize::MAX`. If `--depth` is not
provided, make it 1, otherwise use the provided value.
closes#13914
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes a couple panics:
```
> {} | inspect
Error: x Main thread panicked.
|-> at crates/nu-command/src/debug/inspect_table.rs:87:15
`-> attempt to divide by zero
```
```
> {} | explore
# see an empty column, press Down
Error: x Main thread panicked.
|-> at crates/nu-explore/src/views/cursor/mod.rs:39:9
`-> attempt to subtract with overflow
```
# User-Facing Changes
`{} | inspect` now outputs an empty table:
```
╭─────────────┬────────╮
│ description │ record │
├─────────────┴────────┤
│ │
├──────────────────────┤
```
`{} | explore` opens the help menu.
Both match the empty list behavior.
# Tests
I'm not sure how to test `explore`, as it waits for interaction.
# Description
This PR updates the shell_integration defaults so that they work as
described in default_config.nu even when there is no config.nu file.
closes#13924
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR updates nushell to the latest reedline commit 660a5074
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR tries to allow the `ls` command to use multiple threads if so
specified. The reason why you'd want to use threads is if you notice
`ls` taking a long time. The one place I see that happening is from WSL.
I'm not sure how real-world this test is but you can see that this
simple `ls` of a folder with length takes a while 9366 ms. I've run this
test many times and it ranges from about 15 seconds to about 10 seconds.
But with the `--threads` parameter, it takes less time, 2744ms in this
screenshot.
The only way forward I could find was to _always_ use threading and
adjust the number of threads based on if the user provides a flag. That
seemed the easiest way to do it after applying @devyn's interleave
advice.
No feelings hurt if this doesn't land. It's more of an experiment but I
think it has potential.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
hi hi, this makes the parsing of modifier key combos in config more
general, and adds support for additional kitty keyboard protocol
modifiers. It seems that support for [kitty
keys](https://sw.kovidgoyal.net/kitty/keyboard-protocol) had already
been added to nushell in https://github.com/nushell/nushell/pull/10540,
and this was the only missing piece to making them available in
keybindings.
# User-Facing Changes
- keybindings in config can include the super, hyper and meta modifiers
(e.g. `modifier: super`, `modifier: shift_super`, etc.), and these
modifiers will work in supporting terminals (kitty, foot, wezterm,
alacritty...)
- all permutations of snake_cased modifier combinations now behave
equivalently for the purpose of describing keybindings in config (e.g.
`control_alt_shift` was previously supported where `shift_control_alt`
was a config error — now they're the same)
# Tests
None of this looks to be tested at the moment. I only found a smoke test
under the nu-cli crate, and I couldn't break tests elsewhere by stuffing
around with modifier handling. Works on my machine, though! ✨🌈
