# Description
This PR makes it so that non-zero exit codes and termination by signal
are treated as a normal `ShellError`. Currently, these are silent
errors. That is, if an external command fails, then it's code block is
aborted, but the parent block can sometimes continue execution. E.g.,
see #8569 and this example:
```nushell
[1 2] | each { ^false }
```
Before this would give:
```
╭───┬──╮
│ 0 │ │
│ 1 │ │
╰───┴──╯
```
Now, this shows an error:
```
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:1:2]
1 │ [1 2] | each { ^false }
· ┬
· ╰── source value
╰────
Error: nu:🐚:non_zero_exit_code
× External command had a non-zero exit code
╭─[entry #1:1:17]
1 │ [1 2] | each { ^false }
· ──┬──
· ╰── exited with code 1
╰────
```
This PR fixes#12874, fixes#5960, fixes#10856, and fixes#5347. This
PR also partially addresses #10633 and #10624 (only the last command of
a pipeline is currently checked). It looks like #8569 is already fixed,
but this PR will make sure it is definitely fixed (fixes#8569).
# User-Facing Changes
- Non-zero exit codes and termination by signal now cause an error to be
thrown.
- The error record value passed to a `catch` block may now have an
`exit_code` column containing the integer exit code if the error was due
to an external command.
- Adds new config values, `display_errors.exit_code` and
`display_errors.termination_signal`, which determine whether an error
message should be printed in the respective error cases. For
non-interactive sessions, these are set to `true`, and for interactive
sessions `display_errors.exit_code` is false (via the default config).
# Tests
Added a few tests.
# After Submitting
- Update docs and book.
- Future work:
- Error if other external commands besides the last in a pipeline exit
with a non-zero exit code. Then, deprecate `do -c` since this will be
the default behavior everywhere.
- Add a better mechanism for exit codes and deprecate
`$env.LAST_EXIT_CODE` (it's buggy).
# Description
The content-type was not being handled appropriately when sending
requests with a string value.
# User-Facing Changes
- Passing a string value through a pipeline with a content-type set as
metadata is handled correctly
- Passing a string value as a parameter with a content-type set as a
flag is handled correctly.
# Description
After looking at #13751 I noticed that the config setting
`use_grid_icons` seems out of place. So, I removed it from the config
and made it a parameter to the `grid` command.
# Description
The existing code uses exact matches on content type. This can caused
things like "application/json; charset=utf-8" that contain a charset not
using send_json method.
NOTE: The charset portion in the above example would still be ignored as
we rely on serde and the client library to control the encoding, it is
still better to catch the json case.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
Cleans up and refactors the config code using the `IntoValue` macro.
Shoutout to @cptpiepmatz for making the macro!
# User-Facing Changes
Should be none.
# After Submitting
Somehow refactor the reverse transformation.
Closes#13687Closes#13686
# Description
Light refactoring of `send_request `in `client.rs`. In the end there are
more lines but now the logic is more concise and facilitates adding new
conditions in the future. Unit tests ran fine and I tested a few cases
manually.
Cool project btw, I'll be using nushell from now on.
# Description
This pr addresses the comment:
https://github.com/nushell/nushell/issues/11791#issuecomment-2308384155
It's caused by if the last row have a very different format to the first
row, the value of `end_char` will exceed the `line_char_boundaries`.
Adding a guard for it should avoid such panic.
# User-Facing Changes
The following code should no longer panic:
```shell
"nu_plugin_highlight = '1.2.2+0.97.1' # A nushell plugin for syntax highlighting
trace_nu_plugin = '0.3.1' # A wrapper to trace Nu plugins
nu_plugin_bash_env = '0.13.0' # Nu plugin bash-env
nu_plugin_from_sse = '0.4.0' # Nushell plugin to convert a HTTP server sent event stream to structured data
... and 90 crates more (use --limit N to see more)" | detect columns -n --guess
```
# Tests + Formatting
Added 1 test.
# Description
This changes the behavior of `tee` to be more transparent when given a
value that isn't a list or range. Previously, anything that wasn't a
byte stream would converted to a list stream using the iterator
implementation, which led to some surprising results. Instead, now, if
the value is a string or binary, it will be treated the same way a byte
stream is, and the output of `tee` is a byte stream instead of the
original value. This is done so that we can synchronize with the other
thread on collect, and potentially capture any error produced by the
closure.
For values that can't be converted to streams, the closure is just run
with a clone of the value instead on another thread. Because we can't
wait for the other thread, there is no way to send an error back to the
original thread, so instead it's just written to stderr using
`report_error_new()`.
There are a couple of follow up edge cases I see where byte streams
aren't necessarily treated exactly the same way strings are, but this
should mostly be a good experience.
Fixes#13489.
# User-Facing Changes
Breaking change.
- `tee` now outputs and sends string/binary stream for string/binary
input.
- `tee` now outputs and sends the original value for any other input
other than lists/ranges.
# Tests + Formatting
Added for new behavior.
# After Submitting
- [ ] release notes: breaking change, command change
# Description
`cargo` somewhat recently gained the capability to store `lints`
settings for the crate and workspace, that can override the defaults
from `rustc` and `clippy` lints. This means we can enforce some lints
without having to actively pass them to clippy via `cargo clippy -- -W
...`. So users just forking the repo have an easier time to follow
similar requirements like our CI.
## Limitation
An exception that remains is that those lints apply to both the primary
code base and the tests. Thus we can't include e.g. `unwrap_used`
without generating noise in the tests. Here the setup in the CI remains
the most helpful.
## Included lints
- Add `clippy::unchecked_duration_subtraction` (added by #12549)
# User-Facing Changes
Running `cargo clippy --workspace` should be closer to the CI. This has
benefits for editor configured runs of clippy and saves you from having
to use `toolkit` to be close to CI in more cases.
this PR should close#12168
# Description
Add `split cell-path`, inverse of `into cell-path`.
# User-Facing Changes
Currently there is no way to make use of cell-path values as a user,
other than passing them to builtin commands. This PR makes more use
cases possible.
# Description
Closes#13677
Remove the command `str deunicode`, as it has a narrow application, is
loosely defined by the data provided by the `deunicode` crate and thus a
stabilization liability post-1.0.
Furthermore the data to perform the look-up is quite substantial.
Removing the command and the `deunicode` dependency saves 0.9 MB of
binary data in release mode (~ 2% of total)
(checked via `cargo bloat --release` for a linux x86 build)
# User-Facing Changes
The `str deunicode` command recently added in #13270 is gone
Mistakes have been made. I forgot about a bunch of `todo`s in the helper
functions. So, this PR replaces them with proper errors. It also adds
tests for parse-time evaluation, because one `todo` I missed was in a
`run_const` function.
Hi there
Here I am using latest tabled.
My tests shows it does fixes panics, but I am wanna be sure.
@fdncred could you verify that it does fixes those panics/errors?
Closes#13405Closes#12786
Based on the discussion in #13419.
## Description
Reworks the `decode`/`encode` commands by adding/changing the following
bases:
- `base32`
- `base32hex`
- `hex`
- `new-base64`
The `hex` base is compatible with the previous version of `hex` out of
the box (it only adds more flags). `base64` isn't, so the PR adds a new
version and deprecates the old one.
All commands have `string -> binary` signature for decoding and `string
| binary -> string` signature for encoding. A few `base64` encodings,
which are not a part of the
[RFC4648](https://datatracker.ietf.org/doc/html/rfc4648#section-6), have
been dropped.
## Example usage
```Nushell
~/fork/nushell> "string" | encode base32 | decode base32 | decode
string
```
```Nushell
~/fork/nushell> "ORSXG5A=" | decode base32
# `decode` always returns a binary value
Length: 4 (0x4) bytes | printable whitespace ascii_other non_ascii
00000000: 74 65 73 74 test
```
## User-Facing Changes
- New commands: `encode/decode base32/base32hex`.
- `encode hex` gets a `--lower` flag.
- `encode/decode base64` deprecated in favor of `encode/decode
new-base64`.
# Description
The meaning of the word usage is specific to describing how a command
function is *used* and not a synonym for general description. Usage can
be used to describe the SYNOPSIS or EXAMPLES sections of a man page
where the permitted argument combinations are shown or example *uses*
are given.
Let's not confuse people and call it what it is a description.
Our `help` command already creates its own *Usage* section based on the
available arguments and doesn't refer to the description with usage.
# User-Facing Changes
`help commands` and `scope commands` will now use `description` or
`extra_description`
`usage`-> `description`
`extra_usage` -> `extra_description`
Breaking change in the plugin protocol:
In the signature record communicated with the engine.
`usage`-> `description`
`extra_usage` -> `extra_description`
The same rename also takes place for the methods on
`SimplePluginCommand` and `PluginCommand`
# Tests + Formatting
- Updated plugin protocol specific changes
# After Submitting
- [ ] update plugin protocol doc
# Description
The previous behaviour of `into record` on lists was to create a new
record with each list index as the key. This was not very useful for
creating meaningful records, though, and most people would end up using
commands like `headers` or `transpose` to turn a list of keys and values
into a record.
This PR changes that instead to do what I think the most ergonomic thing
is, and instead:
- A list of records is merged into one record.
- A list of pairs (two element lists) is folded into a record with the
first element of each pair being the key, and the second being the
value.
The former is just generally more useful than having to use `reduce`
with `merge` for such a common operation, and the latter is useful
because it means that `$a | zip $b | into record` *just works* in the
way that seems most obvious.
Example:
```nushell
[[foo bar] [baz quux]] | into record # => {foo: bar, baz: quux}
[{foo: bar} {baz: quux}] | into record # => {foo: bar, baz: quux}
[foo baz] | zip [bar quux] | into record # => {foo: bar, baz: quux}
```
The support for range input has been removed, as it would no longer
reflect the treatment of an equivalent list.
The following is equivalent to the old behavior, in case that's desired:
```
0.. | zip [a b c] | into record # => {0: a, 1: b, 2: c}
```
# User-Facing Changes
- `into record` changed as described above (breaking)
- `into record` no longer supports range input (breaking)
# Tests + Formatting
Examples changed to match, everything works. Some usage in stdlib and
`nu_plugin_nu_example` had to be changed.
# After Submitting
- [ ] release notes (commands, breaking change)
Fixesnushell/nushell#8723
# Description
The example was showing the flag that no longer exists.
# User-Facing Changes
Help no longer shows the example with `-d` flag.
# Tests + Formatting
I trust in CI.
# After Submitting
Nothing.
Fixesnushell/nushell#7995
# Description
This dependency is no longer used by nushell itself.
# User-Facing Changes
None.
# Tests + Formatting
Pased.
# After Submitting
None.
# Description
Prefer process name over executable path. This in practice causes the
`name` column to use just the base executable name.
Also set start_time to nothing on error, because why not.
# User-Facing Changes
Before:
> /opt/google/chrome/chrome
After:
> chrome
Also picks up changes due to `echo test-proc > /proc/$$/comm`.
# Tests + Formatting
No new coverage.
# Description
Previously when nushell failed to parse the content type header, it
would emit an error instead of returning the response. Now it will fall
back to `text/plain` (which, in turn, will trigger type detection based
on file extension).
May fix (potentially) nushell/nushell#11927
Refs:
https://discord.com/channels/601130461678272522/614593951969574961/1272895236489613366
Supercedes: #13609
# User-Facing Changes
It's now possible to fetch content even if the server returns an invalid
content type header. Users may need to parse the response manually, but
it's still better than not getting the response at all.
# Tests + Formatting
Added a test for the new behaviour.
# After Submitting
# Description
@sholderbach pointed out that I could've made this error message better.
So, here's my attempt to make it better.
This should work. I had a hard time figuring out how to trigger the
error anyway because the type checker doesn't allow "bad" parameters to
begin with.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR changes glob to take either a string or a glob as a parameter.
Closes#13611
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is meant to provide a more helpful error message when using http
get and the content type can't be parsed.
### Before
### After
The span isn't perfect but there's no way to get the span of the content
type that I can see.
In the middle of fixing this error, I also discovered how to fix the
problem in general. Since you can now see the error message complaining
about double quotes (char 22 at position 0. 22 hex is `"`). The fix is
just to remove all the double quotes from the content_type and then you
get this.
### After After
The discussion on Discord about this is that `--raw` or
`--ignore-errors` should eat this error and it "just work" as well as
default to text or binary when the mime parsing fails. I agree but this
PR does not implement that.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13479
# User-Facing Changes
Given the following setup:
```
cd /tmp
touch src_file.txt
ln -s src_file.txt link1
```
### Before
```
ls -lf link1 | get target.0 # It outputs src_file.txt
```
### After
```
ls -lf link1 | get target.0 # It outputs /tmp/src_file.txt
```
# Tests + Formatting
Added a test for the change
# Description
Fixes Issue #13477
This adds a check to see if a user is trying to invoke a
(non-executable) file as a command and returns a helpful error if so.
EDIT: this will not work on Windows, and is arguably not relevant there,
because of the different semantics of executables. I think the
equivalent on Windows would be if a user tries to invoke `./foo`, we
should look for `foo.exe` or `foo.bat` in the directory and recommend
that if it exists.
# User-Facing Changes
When a user invokes an unrecognized command that is the path to an
existing file, the error used to say:
`{name} is neither a Nushell built-in or a known external command`
This PR proposes to change the message to:
`{name} refers to a file that is not executable. Did you forget to to
set execute permissions?`
# Tests + Formatting
Ran cargo fmt, clippy and test on the workspace.
EDIT: added test asserting the new behavior
# Description
Something I meant to add a long time ago. We currently don't have a
convenient way to print raw binary data intentionally. You can pipe it
through `cat` to turn it into an unknown stream, or write it to a file
and read it again, but we can't really just e.g. generate msgpack and
write it to stdout without this. For example:
```nushell
[abc def] | to msgpack | print --raw
```
This is useful for nushell scripts that will be piped into something
else. It also means that `nu_plugin_nu_example` probably doesn't need to
do this anymore, but I haven't adjusted it yet:
```nushell
def tell_nushell_encoding [] {
print -n "\u{0004}json"
}
```
This happens to work because 0x04 is a valid UTF-8 character, but it
wouldn't be possible if it were something above 0x80.
`--raw` also formats other things without `table`, I figured the two
things kind of go together. The output is kind of like `to text`.
Debatable whether that should share the same flag, but it was easier
that way and seemed reasonable.
# User-Facing Changes
- `print` new flag: `--raw`
# Tests + Formatting
Added tests.
# After Submitting
- [ ] release notes (command modified)
This PR closes [Issue
#13482](https://github.com/nushell/nushell/issues/13482)
# Description
This PR tend to make all math function to be constant.
# User-Facing Changes
The math commands now can be used as constant methods.
### Some Example
```
> const MODE = [3 3 9 12 12 15] | math mode
> $MODE
╭───┬────╮
│ 0 │ 3 │
│ 1 │ 12 │
╰───┴────╯
> const LOG = [16 8 4] | math log 2
> $LOG
╭───┬──────╮
│ 0 │ 4.00 │
│ 1 │ 3.00 │
│ 2 │ 2.00 │
╰───┴──────╯
> const VAR = [1 3 5] | math variance
> $VAR
2.6666666666666665
```
# Tests + Formatting
Tests are added for all of the math command to test there constant
behavior.
I mostly focused on the actual user experience, not the correctness of
the methods and algorithms.
# After Submitting
I think this change don't require any additional documentation. Feel
free to correct me in this topic please.
# Description
Attempt to guess the content type of a file when opening with --raw and
set it in the pipeline metadata.
<img width="644" alt="Screenshot 2024-08-02 at 11 30 10"
src="https://github.com/user-attachments/assets/071f0967-c4dd-405a-b8c8-f7aa073efa98">
# User-Facing Changes
- Content of files can be directly piped into commands like `http post`
with the content type set appropriately when using `--raw`.
# Description
When using a format string, `into datetime` would disallow an `int` even
when it logically made sense. This was mainly a problem when attempting
to convert a Unix epoch to Nushell `datetime`. Unix epochs are often
stored or returned as `int` in external data sources.
```nu
1722821463 | into datetime -f '%s'
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #3:1:1]
1 │ 1722821463 | into datetime -f '%s'
· ─────┬──── ──────┬──────
· │ ╰── only string input data is supported
· ╰── input type: int
╰────
```
While the solution was simply to `| to text` the `int`, this PR handles
the use-case automatically.
Essentially a ~5 line change that just moves the current parsing to a
closure that is called for both Strings and Ints-converted-to-Strings.
# User-Facing Changes
After the change:
```nu
[
1722821463
"1722821463"
0
] | each { into datetime -f '%s' }
╭───┬──────────────╮
│ 0 │ 10 hours ago │
│ 1 │ 10 hours ago │
│ 2 │ 54 years ago │
╰───┴──────────────╯
```
# Tests + Formatting
Test case added.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
# Description
Part 4 of replacing std::path types with nu_path types added in
https://github.com/nushell/nushell/pull/13115. This PR migrates various
tests throughout the code base.
# Description
Since we make the promise that record keys/columns are exclusice we
don't have to go through all columns after we have found the first one.
Should permit some short-circuiting if the column is found early.
# User-Facing Changes
(-)
# Tests + Formatting
(-)
# Description
Updates `default` command description to be more clear and adds an
example for a missing values in a list-of-records.
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- Update `nothing` doc in Book to reference `default` per
https://github.com/nushell/nushell.github.io/issues/1073 - This was a
bit of a rabbit trail on the path to that update. ;-)
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
With this PR, we should be able to close
https://github.com/nushell/nushell.github.io/issues/1225
Help/doc/examples updated for:
* `cd` to show multi-dot traversal
* `cd` to show implicit `cd` with bare directory path
* Fixed/clarified another example that mentioned `$OLDPATH` while I was
in there
* `mv` and `cp` examples for multi-dot traversal
* Updated `cp` examples to use more consistent (and clear) filenames
# User-Facing Changes
Help/doc only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Clarified `random chars` help/doc:
* Default string length in absence of a `--length` arg is 25
* Characters are *"uniformly distributed over ASCII letters and numbers:
a-z, A-Z and 0-9"* (copied from the [`rand` crate
doc](https://docs.rs/rand/latest/rand/distributions/struct.Alphanumeric.html).
# User-Facing Changes
Help/Doc only
