This PR sets the current working directory to the location of the
Nushell executable at startup, using `std::env::set_current_dir()`. This
is desirable because after PR
https://github.com/nushell/nushell/pull/12922, we no longer change our
current working directory even after `cd` is executed, and some OS might
lock the directory where Nushell started.
The location of the Nushell executable is chosen because it cannot be
removed while Nushell is running anyways, so we don't have to worry
about OS locking it.
This PR has the side effect that it breaks buggy command even harder.
I'll keep this PR as a draft until these commands are fixed, but it
might be helpful to pull this PR if you're working on fixing one of
those bugs.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Fixes a bug with `set_last_error()` introduced by @IanManske not being
called during the jump to an error handler in IR eval. Without this,
`$env.LAST_EXIT_CODE` wasn't getting set in the `catch` block for an
external.
# Tests + Formatting
Added a `tests/eval` test to cover this in both IR and non-IR eval
# Description
This is my first PR, and I'm looking for feedback to help me improve!
This PR fixes#13380 by expanding the path prior to parsing it.
Also I've removed some unused code in
[completion_common.rs](84e92bb02c/crates/nu-cli/src/completions/completion_common.rs
)
# User-Facing Changes
Auto-completion for "cd .../" now works by expanding to "cd ../../".
# Tests + Formatting
Formatted and added 2 tests for triple dots in the middle of a path and
at the end.
Also added a test for the expand_ndots() function.
# Description
This PR makes it so that non-zero exit codes and termination by signal
are treated as a normal `ShellError`. Currently, these are silent
errors. That is, if an external command fails, then it's code block is
aborted, but the parent block can sometimes continue execution. E.g.,
see #8569 and this example:
```nushell
[1 2] | each { ^false }
```
Before this would give:
```
╭───┬──╮
│ 0 │ │
│ 1 │ │
╰───┴──╯
```
Now, this shows an error:
```
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:1:2]
1 │ [1 2] | each { ^false }
· ┬
· ╰── source value
╰────
Error: nu:🐚:non_zero_exit_code
× External command had a non-zero exit code
╭─[entry #1:1:17]
1 │ [1 2] | each { ^false }
· ──┬──
· ╰── exited with code 1
╰────
```
This PR fixes#12874, fixes#5960, fixes#10856, and fixes#5347. This
PR also partially addresses #10633 and #10624 (only the last command of
a pipeline is currently checked). It looks like #8569 is already fixed,
but this PR will make sure it is definitely fixed (fixes#8569).
# User-Facing Changes
- Non-zero exit codes and termination by signal now cause an error to be
thrown.
- The error record value passed to a `catch` block may now have an
`exit_code` column containing the integer exit code if the error was due
to an external command.
- Adds new config values, `display_errors.exit_code` and
`display_errors.termination_signal`, which determine whether an error
message should be printed in the respective error cases. For
non-interactive sessions, these are set to `true`, and for interactive
sessions `display_errors.exit_code` is false (via the default config).
# Tests
Added a few tests.
# After Submitting
- Update docs and book.
- Future work:
- Error if other external commands besides the last in a pipeline exit
with a non-zero exit code. Then, deprecate `do -c` since this will be
the default behavior everywhere.
- Add a better mechanism for exit codes and deprecate
`$env.LAST_EXIT_CODE` (it's buggy).
Fixesnushell/nushell#13689
# Description
Respect user-defined `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT`
Additionally I fixed `nu_with_std!()` macro (it was not working
correctly)
# User-Facing Changes
Users now may set `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT` in
`env.nu` and it will work even if `use std` is used after that.
# Tests + Formatting
Added a couple of tests for the new functionality.
# After Submitting
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently the parser and the documentation generation use the signature
of the command, which means that it doesn't pick up on the changed name
of the `main` block, and therefore shows the name of the command as
"main" and doesn't find the subcommands. This PR changes the
aforementioned places to use the block signature to fix these issues.
This closes#13397. Incidentally it also causes input/output types to be
shown in the help, which is kinda pointless for scripts since they don't
operate on structured data but maybe not worth the effort to remove.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
```
# example.nu
export def main [] { help main }
export def 'main sub' [] { print 'sub' }
```
Before:
After:
# Tests
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests are still missing for the subcommands and the input/output types
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
`bits rol` and `bits ror` were both undefined for the full byte rotates
and panicked when exceeding the byte rotation range.
`bits ror` further more produced nonsensical results by pulling bits
from the following byte instead of the preceding byte.
Those bugs are now fixed
# User-Facing Changes
Sound Nushell `IncorrectValue` error when exceeding the available bits
# Tests + Formatting
Added the necessary tests
# Description
The meaning of the word usage is specific to describing how a command
function is *used* and not a synonym for general description. Usage can
be used to describe the SYNOPSIS or EXAMPLES sections of a man page
where the permitted argument combinations are shown or example *uses*
are given.
Let's not confuse people and call it what it is a description.
Our `help` command already creates its own *Usage* section based on the
available arguments and doesn't refer to the description with usage.
# User-Facing Changes
`help commands` and `scope commands` will now use `description` or
`extra_description`
`usage`-> `description`
`extra_usage` -> `extra_description`
Breaking change in the plugin protocol:
In the signature record communicated with the engine.
`usage`-> `description`
`extra_usage` -> `extra_description`
The same rename also takes place for the methods on
`SimplePluginCommand` and `PluginCommand`
# Tests + Formatting
- Updated plugin protocol specific changes
# After Submitting
- [ ] update plugin protocol doc
# Description
Fixes#11267
Shifting by a `shift >= num_bits` is undefined in the underlying
operation. Previously we also had an overflow on negative shifts for the
operators `bit-shl` and `bit-shr`
Furthermore I found a severe bug in the implementation of shifting of
`binary` data with the commands `bits shl` and `bits shr`, this
categorically produced incorrect results with shifts that were not
`shift % 4 == 0`. `bits shr` also was able to produce outputs with
different size to the input if the shift was exceeding the length of the
input data by more than a byte.
# User-Facing Changes
It is now an error trying to shift by more than the available bits with:
- `bit-shl` operator
- `bit-shr` operator
- command `bits shl`
- command `bits shr`
# Tests + Formatting
Added testing for all relevant cases
# Description
Fixes Issue #13477
This adds a check to see if a user is trying to invoke a
(non-executable) file as a command and returns a helpful error if so.
EDIT: this will not work on Windows, and is arguably not relevant there,
because of the different semantics of executables. I think the
equivalent on Windows would be if a user tries to invoke `./foo`, we
should look for `foo.exe` or `foo.bat` in the directory and recommend
that if it exists.
# User-Facing Changes
When a user invokes an unrecognized command that is the path to an
existing file, the error used to say:
`{name} is neither a Nushell built-in or a known external command`
This PR proposes to change the message to:
`{name} refers to a file that is not executable. Did you forget to to
set execute permissions?`
# Tests + Formatting
Ran cargo fmt, clippy and test on the workspace.
EDIT: added test asserting the new behavior
# Description
As per our Wednesday meeting, this adds a parse error when something
that would be parsed as an external call is present at the top level,
unless the head of the external call begins with a caret (to make it
explicit).
I tried to make the error quite descriptive about what should be done.
# User-Facing Changes
These now cause a parse error:
```nushell
$foo = bar
$foo = `bar`
```
These would have been interpreted as strings before this version, but
now they'd be interpreted as external calls. This behavior is consistent
with `let`/`mut` (which is unaffected by this change).
Here is an example of the error:
```
Error: × External command calls must be explicit in assignments
╭─[entry #3:1:8]
1 │ $foo = bar
· ─┬─
· ╰── add a caret (^) before the command name if you intended to run and capture its output
╰────
help: the parsing of assignments was changed in 0.97.0, and this would have previously been treated as a string.
Alternatively, quote the string with single or double quotes to avoid it being interpreted as a command name. This
restriction may be removed in a future release.
```
# Tests + Formatting
Tests added to cover the change. Note made about it being temporary.
# Description
Part 4 of replacing std::path types with nu_path types added in
https://github.com/nushell/nushell/pull/13115. This PR migrates various
tests throughout the code base.
# Description
Part 3 of replacing `std::path` types with `nu_path` types added in
#13115. This PR targets the paths listed in `$nu`. That is, the home,
config, data, and cache directories.
# Description
This makes assignment operations and `const` behave the same way `let`
and `mut` do, absorbing the rest of the pipeline.
Changes the lexer to be able to recognize assignment operators as a
separate token, and then makes the lite parser continue to push spans
into the same command regardless of any redirections or pipes if an
assignment operator is encountered. Because the pipeline is no longer
split up by the lite parser at this point, it's trivial to just parse
the right hand side as if it were a subexpression not contained within
parentheses.
# User-Facing Changes
Big breaking change. These are all now possible:
```nushell
const path = 'a' | path join 'b'
mut x = 2
$x = random int
$x = [1 2 3] | math sum
$env.FOO = random chars
```
In the past, these would have led to (an attempt at) bare word string
parsing. So while `$env.FOO = bar` would have previously set the
environment variable `FOO` to the string `"bar"`, it now tries to run
the command named `bar`, hence the major breaking change.
However, this is desirable because it is very consistent - if you see
the `=`, you can just assume it absorbs everything else to the right of
it.
# Tests + Formatting
Added tests for the new behaviour. Adjusted some existing tests that
depended on the right hand side of assignments being parsed as
barewords.
# After Submitting
- [ ] release notes (breaking change!)
# Description
[Discovered](https://discord.com/channels/601130461678272522/614593951969574961/1266503282554179604)
by `@warp` on Discord.
The IR compiler was not properly setting redirect modes for
subexpressions because `FullCellPath` was always being compiled with
capture-out redirection. This is the correct behavior if there is a tail
to the `FullCellPath`, as we need the value in order to try to extract
anything from it (although this is unlikely to work) - however, the
parser also generates `FullCellPath`s with an empty tail quite often,
including for bare subexpressions.
Because of this, the following did not behave as expected:
```nushell
(docker run -it --rm alpine)
```
Capturing the output meant that `docker` didn't have direct access to
the terminal as a TTY.
As this is a minor bug fix, it should be okay to include in the 0.96.1
patch release.
# User-Facing Changes
- Fixes the bug as described when running with IR evaluation enabled.
# Tests + Formatting
I added a test for this, though we're not currently running all tests
with IR on the CI, but it should ensure this behaviour is consistent.
The equivalent minimum repro I could find was:
```nushell
(nu --testbin cococo); null
```
as this should cause the `cococo` message to appear on stdout, and if
Nushell is capturing the output, it would be discarded instead.
# Description
Fixes#13441.
I must have forgotten that `Expr::Range` can contain other expressions,
so I wasn't searching for `$in` to replace within it. Easy fix.
# User-Facing Changes
Bug fix, ranges like `6 | 3..$in` work as expected now.
# Tests + Formatting
Added regression test.
# Description
This corrects the parsing of unknown arguments provided to known
externals to behave exactly like external arguments passed to normal
external calls.
I've done this by adding a `SyntaxShape::ExternalArgument` which
triggers the same parsing rules.
Because I didn't like how the highlighting looked, I modified the
flattener to emit `ExternalArg` flat shapes for arguments that have that
syntax shape and are plain strings/globs. This is the same behavior that
external calls have.
Aside from passing the tests, I've also checked manually that the
completer seems to work adequately. I can confirm that specified
positional arguments get completion according to their specified type
(including custom completions), and then anything remaining gets
filepath style completion, as you'd expect from an external command.
Thanks to @OJarrisonn for originally finding this issue.
# User-Facing Changes
- Unknown args are now parsed according to their specified syntax shape,
rather than `Any`. This may be a breaking change, though I think it's
extremely unlikely in practice.
- The unspecified arguments of known externals are now highlighted /
flattened identically to normal external arguments, which makes it more
clear how they're being interpreted, and should help the completer
function properly.
- Known externals now have an implicit rest arg if not specified named
`args`, with a syntax shape of `ExternalArgument`.
# Tests + Formatting
Tests added for the new behaviour. Some old tests had to be corrected to
match.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] release notes (bugfix, and debatable whether it's a breaking
change)
# Description
Adds functionality to the plugin interface to support calling internal
commands from plugins. For example, using `view ir --json`:
```rust
let closure: Value = call.req(0)?;
let Some(decl_id) = engine.find_decl("view ir")? else {
return Err(LabeledError::new("`view ir` not found"));
};
let ir_json = engine.call_decl(
decl_id,
EvaluatedCall::new(call.head)
.with_named("json".into_spanned(call.head), Value::bool(true, call.head))
.with_positional(closure),
PipelineData::Empty,
true,
false,
)?.into_value()?.into_string()?;
let ir = serde_json::from_value(&ir_json);
// ...
```
# User-Facing Changes
Plugin developers can now use `EngineInterface::find_decl()` and
`call_decl()` to call internal commands, which could be handy for
formatters like `to csv` or `to nuon`, or for reflection commands that
help gain insight into the engine.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] release notes
- [ ] update plugin protocol documentation: `FindDecl`, `CallDecl`
engine calls; `Identifier` engine call response
# Description
This grew quite a bit beyond its original scope, but I've tried to make
`$in` a bit more consistent and easier to work with.
Instead of the parser generating calls to `collect` and creating
closures, this adds `Expr::Collect` which just evaluates in the same
scope and doesn't require any closure.
When `$in` is detected in an expression, it is replaced with a new
variable (also called `$in`) and wrapped in `Expr::Collect`. During
eval, this expression is evaluated directly, with the input and with
that new variable set to the collected value.
Other than being faster and less prone to gotchas, it also makes it
possible to typecheck the output of an expression containing `$in`,
which is nice. This is a breaking change though, because of the lack of
the closure and because now typechecking will actually happen. Also, I
haven't attempted to typecheck the input yet.
The IR generated now just looks like this:
```gas
collect %in
clone %tmp, %in
store-variable $in, %tmp
# %out <- ...expression... <- %in
drop-variable $in
```
(where `$in` is the local variable created for this collection, and not
`IN_VARIABLE_ID`)
which is a lot better than having to create a closure and call `collect
--keep-env`, dealing with all of the capture gathering and allocation
that entails. Ideally we can also detect whether that input is actually
needed, so maybe we don't have to clone, but I haven't tried to do that
yet. Theoretically now that the variable is a unique one every time, it
should be possible to give it a type - I just don't know how to
determine that yet.
On top of that, I've also reworked how `$in` works in pipeline-initial
position. Previously, it was a little bit inconsistent. For example,
this worked:
```nushell
> 3 | do { let x = $in; let y = $in; print $x $y }
3
3
```
However, this causes a runtime variable not found error on the second
`$in`:
```nushell
> def foo [] { let x = $in; let y = $in; print $x $y }; 3 | foo
Error: nu:🐚:variable_not_found
× Variable not found
╭─[entry #115:1:35]
1 │ def foo [] { let x = $in; let y = $in; print $x $y }; 3 | foo
· ─┬─
· ╰── variable not found
╰────
```
I've fixed this by making the first element `$in` detection *always*
happen at the block level, so if you use `$in` in pipeline-initial
position anywhere in a block, it will collect with an implicit
subexpression around the whole thing, and you can then use that `$in`
more than once. In doing this I also rewrote `parse_pipeline()` and
hopefully it's a bit more straightforward and possibly more efficient
too now.
Finally, I've tried to make `let` and `mut` a lot more straightforward
with how they handle the rest of the pipeline, and using a redirection
with `let`/`mut` now does what you'd expect if you assume that they
consume the whole pipeline - the redirection is just processed as
normal. These both work now:
```nushell
let x = ^foo err> err.txt
let y = ^foo out+err>| str length
```
It was previously possible to accomplish this with a subexpression, but
it just seemed like a weird gotcha that you couldn't do it. Intuitively,
`let` and `mut` just seem to take the whole line.
- closes#13137
# User-Facing Changes
- `$in` will behave more consistently with blocks and closures, since
the entire block is now just wrapped to handle it if it appears in the
first pipeline element
- `$in` no longer creates a closure, so what can be done within an
expression containing `$in` is less restrictive
- `$in` containing expressions are now type checked, rather than just
resulting in `any`. However, `$in` itself is still `any`, so this isn't
quite perfect yet
- Redirections are now allowed in `let` and `mut` and behave pretty much
how you'd expect
# Tests + Formatting
Added tests to cover the new behaviour.
# After Submitting
- [ ] release notes (definitely breaking change)
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Replaces the `dirs_next` family of crates with `dirs`. `dirs_next` was
born when the `dirs` crates were abandoned three years ago, but they're
being maintained again and most projects depend on `dirs` nowadays.
`dirs_next` has been abandoned since.
This came up while working on
https://github.com/nushell/nushell/pull/13382.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Tests and formatter have been run.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds an internal representation language to Nushell, offering an
alternative evaluator based on simple instructions, stream-containing
registers, and indexed control flow. The number of registers required is
determined statically at compile-time, and the fixed size required is
allocated upon entering the block.
Each instruction is associated with a span, which makes going backwards
from IR instructions to source code very easy.
Motivations for IR:
1. **Performance.** By simplifying the evaluation path and making it
more cache-friendly and branch predictor-friendly, code that does a lot
of computation in Nushell itself can be sped up a decent bit. Because
the IR is fairly easy to reason about, we can also implement
optimization passes in the future to eliminate and simplify code.
2. **Correctness.** The instructions mostly have very simple and
easily-specified behavior, so hopefully engine changes are a little bit
easier to reason about, and they can be specified in a more formal way
at some point. I have made an effort to document each of the
instructions in the docs for the enum itself in a reasonably specific
way. Some of the errors that would have happened during evaluation
before are now moved to the compilation step instead, because they don't
make sense to check during evaluation.
3. **As an intermediate target.** This is a good step for us to bring
the [`new-nu-parser`](https://github.com/nushell/new-nu-parser) in at
some point, as code generated from new AST can be directly compared to
code generated from old AST. If the IR code is functionally equivalent,
it will behave the exact same way.
4. **Debugging.** With a little bit more work, we can probably give
control over advancing the virtual machine that `IrBlock`s run on to
some sort of external driver, making things like breakpoints and single
stepping possible. Tools like `view ir` and [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir) make it easier than
before to see what exactly is going on with your Nushell code.
The goal is to eventually replace the AST evaluator entirely, once we're
sure it's working just as well. You can help dogfood this by running
Nushell with `$env.NU_USE_IR` set to some value. The environment
variable is checked when Nushell starts, so config runs with IR, or it
can also be set on a line at the REPL to change it dynamically. It is
also checked when running `do` in case within a script you want to just
run a specific piece of code with or without IR.
# Example
```nushell
view ir { |data|
mut sum = 0
for n in $data {
$sum += $n
}
$sum
}
```
```gas
# 3 registers, 19 instructions, 0 bytes of data
0: load-literal %0, int(0)
1: store-variable var 904, %0 # let
2: drain %0
3: drop %0
4: load-variable %1, var 903
5: iterate %0, %1, end 15 # for, label(1), from(14:)
6: store-variable var 905, %0
7: load-variable %0, var 904
8: load-variable %2, var 905
9: binary-op %0, Math(Plus), %2
10: span %0
11: store-variable var 904, %0
12: load-literal %0, nothing
13: drain %0
14: jump 5
15: drop %0 # label(0), from(5:)
16: drain %0
17: load-variable %0, var 904
18: return %0
```
# Benchmarks
All benchmarks run on a base model Mac Mini M1.
## Iterative Fibonacci sequence
This is about as best case as possible, making use of the much faster
control flow. Most code will not experience a speed improvement nearly
this large.
```nushell
def fib [n: int] {
mut a = 0
mut b = 1
for _ in 2..=$n {
let c = $a + $b
$a = $b
$b = $c
}
$b
}
use std bench
bench { 0..50 | each { |n| fib $n } }
```
IR disabled:
```
╭───────┬─────────────────╮
│ mean │ 1ms 924µs 665ns │
│ min │ 1ms 700µs 83ns │
│ max │ 3ms 450µs 125ns │
│ std │ 395µs 759ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
IR enabled:
```
╭───────┬─────────────────╮
│ mean │ 452µs 820ns │
│ min │ 427µs 417ns │
│ max │ 540µs 167ns │
│ std │ 17µs 158ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
##
[gradient_benchmark_no_check.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/gradient_benchmark_no_check.nu)
IR disabled:
```
╭───┬──────────────────╮
│ 0 │ 27ms 929µs 958ns │
│ 1 │ 21ms 153µs 459ns │
│ 2 │ 18ms 639µs 666ns │
│ 3 │ 19ms 554µs 583ns │
│ 4 │ 13ms 383µs 375ns │
│ 5 │ 11ms 328µs 208ns │
│ 6 │ 5ms 659µs 542ns │
╰───┴──────────────────╯
```
IR enabled:
```
╭───┬──────────────────╮
│ 0 │ 22ms 662µs │
│ 1 │ 17ms 221µs 792ns │
│ 2 │ 14ms 786µs 708ns │
│ 3 │ 13ms 876µs 834ns │
│ 4 │ 13ms 52µs 875ns │
│ 5 │ 11ms 269µs 666ns │
│ 6 │ 6ms 942µs 500ns │
╰───┴──────────────────╯
```
##
[random-bytes.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/random-bytes.nu)
I got pretty random results out of this benchmark so I decided not to
include it. Not clear why.
# User-Facing Changes
- IR compilation errors may appear even if the user isn't evaluating
with IR.
- IR evaluation can be enabled by setting the `NU_USE_IR` environment
variable to any value.
- New command `view ir` pretty-prints the IR for a block, and `view ir
--json` can be piped into an external tool like [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir).
# Tests + Formatting
All tests are passing with `NU_USE_IR=1`, and I've added some more eval
tests to compare the results for some very core operations. I will
probably want to add some more so we don't have to always check
`NU_USE_IR=1 toolkit test --workspace` on a regular basis.
# After Submitting
- [ ] release notes
- [ ] further documentation of instructions?
- [ ] post-release: publish `nu_plugin_explore_ir`
# Description
Fixes the lexer to recognize `out>|`, `err>|`, `out+err>|`, etc.
Previously only the short-style forms were recognized, which was
inconsistent with normal file redirections.
I also integrated it all more into the normal lex path by checking `|`
in a special way, which should be more performant and consistent, and
cleans up the code a bunch.
Closes#13331.
# User-Facing Changes
- Adds `out>|` (error), `err>|`, `out+err>|`, `err+out>|` as recognized
forms of the pipe redirection.
# Tests + Formatting
All passing. Added tests for the new forms.
# After Submitting
- [ ] release notes
# Description
From the feedbacks from @amtoine , it's good to make nushell shows error
for `o>|` syntax.
# User-Facing Changes
## Before
```nushell
'foo' o>| print 07/09/2024 06:44:23 AM
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #6:1:9]
1 │ 'foo' o>| print
· ┬
· ╰── expected redirection target
```
## After
```nushell
'foo' o>| print 07/09/2024 06:47:26 AM
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #1:1:7]
1 │ 'foo' o>| print
· ─┬─
· ╰── expected `|`. Redirection stdout to pipe is the same as piping directly.
╰────
```
# Tests + Formatting
Added one test
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes the problem pointed out in
https://github.com/nushell/nushell/issues/13204, where the Fish-like
completions aren't sorted properly (this PR doesn't close that issue
because the author there wants more than just fixed sort order).
The cause is all of the file/directory completions being fetched first
and then sorted all together while being treated as strings. Instead,
this PR sorts completions within each individual directory, avoiding
treating `/` as part of the path.
To do this, I removed the `sort` method from the completer trait (as
well as `get_sort_by`) and made all completers sort within the `fetch`
method itself. A generic `sort_completions` helper has been added to
sort lists of completions, and a more specific `sort_suggestions` helper
has been added to sort `Vec<Suggestion>`s.
As for the actual change that fixes the sort order for file/directory
completions, the `complete_rec` helper now sorts the children of each
directory before visiting their children. The file and directory
completers don't bother sorting at the end (except to move hidden files
down).
To reviewers: don't let the 29 changed files scare you, most of those
are just the test fixtures :)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
This is the current behavior with prefix matching:
And with fuzzy matching:
Notice how `partial/hello.txt` is the last suggestion, even though it
should come before `partial-a`. This is because the ASCII code for `/`
is greater than that of `-`, so `partial-` is put before `partial/`.
This is this PR's behavior with prefix matching (`partial/hello.txt` is
at the start):
And with fuzzy matching:
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- Modified the partial completions test fixture to test whether this PR
even fixed anything
- Modified fixture to test sort order of .nu completions (a previous
version of my changes didn't sort all the completions at the end but
there were no tests catching that)
- Added a test for making sure subcommand completions are sorted by
Levenshtein distance (a previous version of my changes sorted in
alphabetical order but there were no tests catching that)
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
The derive macros provided by #13031 are very useful for plugin authors.
In this PR I made use of these macros for two commands.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This Example usage could be highlighted in the changelog for plugin
authors as this is probably very useful for them.
# Description
Fixes: https://github.com/nushell/nushell/issues/12099
Currently if user run `use voice.nu`, and file is unchanged, then run
`use voice.nu` again. nushell will use the module directly, even if
submodule inside `voice.nu` is changed.
After discussed with @kubouch, I think it's ok to re-parse the module
file when:
1. It exports sub modules which are defined by a file
2. It uses other modules which are defined by a file
## About the change:
To achieve the behavior, we need to add 2 attributes to `Module`:
1. `imported_modules`: it tracks the other modules is imported by the
givem `module`, e.g: `use foo.nu`
2. `file`: the path of a module, if a module is defined by a file, it
will be `Some(path)`, or else it will be `None`.
After the change:
use voice.nu always read the file and parse it.
use voice will still use the module which is saved in EngineState.
# User-Facing Changes
use `xxx.nu` will read the file and parse it if it exports submodules or
uses submodules
# Tests + Formatting
Done
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
Fixesnushell/nushell#13207
# Description
This fixes the parsing of command usage when that command comes from a
file with CRLF line endings.
See nushell/nushell#13207 for more details.
# User-Facing Changes
Users on Windows will get correct autocompletion for `std` commands.
# Description
This allows plugins to report their version (and potentially other
metadata in the future). The version is shown in `plugin list` and in
`version`.
The metadata is stored in the registry file, and reflects whatever was
retrieved on `plugin add`, not necessarily the running binary. This can
help you to diagnose if there's some kind of mismatch with what you
expect. We could potentially use this functionality to show a warning or
error if a plugin being run does not have the same version as what was
in the cache file, suggesting `plugin add` be run again, but I haven't
done that at this point.
It is optional, and it requires the plugin author to make some code
changes if they want to provide it, since I can't automatically
determine the version of the calling crate or anything tricky like that
to do it.
Example:
```
> plugin list | select name version is_running pid
╭───┬────────────────┬─────────┬────────────┬─────╮
│ # │ name │ version │ is_running │ pid │
├───┼────────────────┼─────────┼────────────┼─────┤
│ 0 │ example │ 0.93.1 │ false │ │
│ 1 │ gstat │ 0.93.1 │ false │ │
│ 2 │ inc │ 0.93.1 │ false │ │
│ 3 │ python_example │ 0.1.0 │ false │ │
╰───┴────────────────┴─────────┴────────────┴─────╯
```
cc @maxim-uvarov (he asked for it)
# User-Facing Changes
- `plugin list` gets a `version` column
- `version` shows plugin versions when available
- plugin authors *should* add `fn metadata()` to their `impl Plugin`,
but don't have to
# Tests + Formatting
Tested the low level stuff and also the `plugin list` column.
# After Submitting
- [ ] update plugin guide docs
- [ ] update plugin protocol docs (`Metadata` call & response)
- [ ] update plugin template (`fn metadata()` should be easy)
- [ ] release notes
# Description
Removes the `which-support` cargo feature and makes all of its
feature-gated code enabled by default in all builds. I'm not sure why
this one command is gated behind a feature. It seems to be a relic of
older code where we had features for what seems like every command.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Test was failing with “did you mean” due to the `NEXTEST` env var being
present when running tests via `cargo nextest run`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #13066
nushell should remove argument values' inner quote once it gets `=`.
Whatever it's a flag or not, and it also replace from `\"` to `"` before
passing it to external commands.
# User-Facing Changes
Given the shell script:
```shell
# test.sh
echo $@
```
## Before
```
> sh test.sh -ldflags="-s -w" github.com
-ldflags="-s -w" github.com
> sh test.sh exp='-s -w' github.com
exp='-s -w' github.com
```
## After
```
> sh test.sh -ldflags="-s -w" github.com
-ldflags=-s -w github.com
> sh test.sh exp='-s -w' github.com
exp=-s -w github.com
```
# Tests + Formatting
Added some tests
This PR fixes a bug where `.` is expanded into an empty string when used
as an argument to external commands. Fixes
https://github.com/nushell/nushell/issues/12948.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
```nushell
❯ ls
╭───┬───────┬──────┬──────┬──────────╮
│ # │ name │ type │ size │ modified │
├───┼───────┼──────┼──────┼──────────┤
│ 0 │ a.txt │ file │ 0 B │ now │
╰───┴───────┴──────┴──────┴──────────╯
❯ ls a.
NO RECORDS FOUND
```
There is a completion issue on previous version, I think @amtoine have
reproduced it before. But currently I can't reproduce it on latest main.
To avoid such regression, I added some tests for completion.
---------
Co-authored-by: Antoine Stevan <44101798+amtoine@users.noreply.github.com>
# Description
Fixes: https://github.com/nushell/nushell/issues/7761
It's still unsure if we want to change the `range semantic` itself, but
it's good to keep range semantic consistent between nushell commands.
# User-Facing Changes
### Before
```nushell
❯ "abc" | str substring 1..=2
b
```
### After
```nushell
❯ "abc" | str substring 1..=2
bc
```
# Tests + Formatting
Adjust tests to fit new behavior
# Description
Changes `get_full_help` to take a `&dyn Command` instead of multiple
arguments (`&Signature`, `&Examples` `is_parser_keyword`). All of these
arguments can be gathered from a `Command`, so there is no need to pass
the pieces to `get_full_help`.
This PR also fixes an issue where the search terms are not shown if
`--help` is used on a command.
# Description
There is a bug when `hide-env` is used on environment variables that
were present at shell startup. Namely, child processes still inherit the
hidden environment variable. This PR fixes#12900, fixes#11495, and
fixes#7937.
# Tests + Formatting
Added a test.
# Description
This PR introduces a `ByteStream` type which is a `Read`-able stream of
bytes. Internally, it has an enum over three different byte stream
sources:
```rust
pub enum ByteStreamSource {
Read(Box<dyn Read + Send + 'static>),
File(File),
Child(ChildProcess),
}
```
This is in comparison to the current `RawStream` type, which is an
`Iterator<Item = Vec<u8>>` and has to allocate for each read chunk.
Currently, `PipelineData::ExternalStream` serves a weird dual role where
it is either external command output or a wrapper around `RawStream`.
`ByteStream` makes this distinction more clear (via `ByteStreamSource`)
and replaces `PipelineData::ExternalStream` in this PR:
```rust
pub enum PipelineData {
Empty,
Value(Value, Option<PipelineMetadata>),
ListStream(ListStream, Option<PipelineMetadata>),
ByteStream(ByteStream, Option<PipelineMetadata>),
}
```
The PR is relatively large, but a decent amount of it is just repetitive
changes.
This PR fixes#7017, fixes#10763, and fixes#12369.
This PR also improves performance when piping external commands. Nushell
should, in most cases, have competitive pipeline throughput compared to,
e.g., bash.
| Command | Before (MB/s) | After (MB/s) | Bash (MB/s) |
| -------------------------------------------------- | -------------:|
------------:| -----------:|
| `throughput \| rg 'x'` | 3059 | 3744 | 3739 |
| `throughput \| nu --testbin relay o> /dev/null` | 3508 | 8087 | 8136 |
# User-Facing Changes
- This is a breaking change for the plugin communication protocol,
because the `ExternalStreamInfo` was replaced with `ByteStreamInfo`.
Plugins now only have to deal with a single input stream, as opposed to
the previous three streams: stdout, stderr, and exit code.
- The output of `describe` has been changed for external/byte streams.
- Temporary breaking change: `bytes starts-with` no longer works with
byte streams. This is to keep the PR smaller, and `bytes ends-with`
already does not work on byte streams.
- If a process core dumped, then instead of having a `Value::Error` in
the `exit_code` column of the output returned from `complete`, it now is
a `Value::Int` with the negation of the signal number.
# After Submitting
- Update docs and book as necessary
- Release notes (e.g., plugin protocol changes)
- Adapt/convert commands to work with byte streams (high priority is
`str length`, `bytes starts-with`, and maybe `bytes ends-with`).
- Refactor the `tee` code, Devyn has already done some work on this.
---------
Co-authored-by: Devyn Cairns <devyn.cairns@gmail.com>
# Description
Fixes: #12691
In `parse_short_flag`, it only checks special cases for
`SyntaxShape::Int`, `SyntaxShape::Number` to allow a flag to be a
number. This pr adds `SyntaxShape::Float` to allow a flag to be float
number.
# User-Facing Changes
This is possible after this pr:
```nushell
def spam [val: float] { $val };
spam -1.4
```
# Tests + Formatting
Added 1 test
# Description
This PR adds a single test to assert interactivity on slow pipelines
Currently the timeout is set to 6 seconds, as the test can sometimes
take ~3secs to run on my local m1 mac air, which I don't think is an
indication of a slow pipeline, but rather slow test start up time...
# Description
Fixes: #12795
The issue is caused by an empty position of `ParseError::UnexpectedEof`.
So no detailed message is displayed.
To fix the issue, I adjust the start of span to `span.end - 1`. In this
way, we can make sure that it never points to an empty position.
After lexing item, I also reorder the unclosed character checking . Now
it will be checking unclosed opening delimiters first.
# User-Facing Changes
After this pr, it outputs detailed error message for incomplete string
when running scripts.
## Before
```
❯ nu -c "'ab"
Error: nu::parser::unexpected_eof
× Unexpected end of code.
╭─[source:1:4]
1 │ 'ab
╰────
> ./target/debug/nu -c "r#'ab"
Error: nu::parser::unexpected_eof
× Unexpected end of code.
╭─[source:1:6]
1 │ r#'ab
╰────
```
## After
```
> nu -c "'ab"
Error: nu::parser::unexpected_eof
× Unexpected end of code.
╭─[source:1:3]
1 │ 'ab
· ┬
· ╰── expected closing '
╰────
> ./target/debug/nu -c "r#'ab"
Error: nu::parser::unexpected_eof
× Unexpected end of code.
╭─[source:1:5]
1 │ r#'ab
· ┬
· ╰── expected closing '#
╰────
```
# Tests + Formatting
Added some tests for incomplete string.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
This PR should close#7147
# Description
Merged src/tests into /tests to produce a single binary.
# User-Facing Changes
No user facing changes
# Tests + Formatting
Moved tests. Tollkit check pr pass.
# After Submitting
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
Make typos config more strict: ignore false positives where they occur.
1. Ignore only files with typos
2. Add regexp-s with context
3. Ignore variable names only in Rust code
4. Ignore only 1 "identifier"
5. Check dot files
🎁 Extra bonus: fix typos!!
# Description
Judiciously try to avoid allocations/clone by changing the signature of
functions
- **Don't pass str by value unnecessarily if only read**
- **Don't require a vec in `Sandbox::with_files`**
- **Remove unnecessary string clone**
- **Fixup unnecessary borrow**
- **Use `&str` in shape color instead**
- **Vec -> Slice**
- **Elide string clone**
- **Elide `Path` clone**
- **Take &str to elide clone in tests**
# User-Facing Changes
None
# Tests + Formatting
This touches many tests purely in changing from owned to borrowed/static
data
