# Description
The parsing logic for several of our keywords is conditional on the
particular commands for those keywords being in scope:
942030199d/crates/nu-parser/src/parse_keywords.rs (L272-L279)
Thus the following involved parsing logic was not fuzzed by the existing
`parse` fuzz target so far.
This adds an additional fuzz target `parse_with_keywords` that loads the
commands from `nu-cmd-lang`. Those are primarily the keyword
implementations, thus the relevant code paths in the parser that depend
on those `DeclId`s and the potential const eval of `if` etc. get
unlocked.
The existing `parse` target is preserved if you have concerns about the
fuzzing breaking containment in some form due to those commands.
# Tests + Formatting
Found https://github.com/nushell/nushell/issues/14972 with this target
# Description
The `(version).build_os` variable inherits from `shadow_rs` `BUILD_OS`
which points to the OS on which the binary was built but does not
reflect the target if it was cross-compiled. We cross-compile several of
the targets for our binary releases. Thus the info in the banner was
misleading.
# User-Facing Changes
By changing to `build_target` the target triple is shown instead.
This is slightly more verbose but should also allow disambiguation
between the `musl` and `glibc` builds.
# Tests + Formatting
(-)
Fixes#15028
# Description
The current implementation of `into duration` uses bare pointer
arithmetic instead of wrapping one. This works fine on 64-bit platforms,
since the pointers don't take up all of the 64 bits, but fails on 32 bit
ones.
# Tests + Formatting
All of the affected tests pass on my end, but it's `x86_84`, so they
were also passing before that.
# Description
After this pr, nushell is able to raise errors with a backtrace, which
should make users easier to debug. To enable the feature, users need to
set env variable via `$env.NU_BACKTRACE = 1`. But yeah it might not work
perfectly, there are some corner cases which might not be handled.
I think it should close#13379 in another way.
### About the change
The implementation mostly contained with 2 parts:
1. introduce a new `ChainedError` struct as well as a new
`ShellError::ChainedError` variant. If `eval_instruction` returned an
error, it converts the error to `ShellError::ChainedError`.
`ChainedError` struct is responsable to display errors properly. It
needs to handle the following 2 cases:
- if we run a function which runs `error make` internally, it needs to
display the error itself along with caller span.
- if we run a `error make` directly, or some commands directly returns
an error, we just want nushell raise an error about `error make`.
2. Attach caller spans to `ListStream` and `ByteStream`, because they
are lazy streams, and *only* contains the span that runs it
directly(like `^false`, for example), so nushell needs to add all caller
spans to the stream.
For example: in `def a [] { ^false }; def b [] { a; 33 }; b`, when we
run `b`, which runs `a`, which runs `^false`, the `ByteStream` only
contains the span of `^false`, we need to make it contains the span of
`a`, so nushell is able to get all spans if something bad happened.
This behavior is happened after running `Instruction::Call`, if it
returns a `ByteStream` and `ListStream`, it will call `push_caller_span`
method to attach call spans.
# User-Facing Changes
It's better to demostrate how it works by examples, given the following
definition:
```nushell
> $env.NU_BACKTRACE = 1
> def a [x] { if $x == 3 { error make {msg: 'a custom error'}}}
> def a_2 [x] { if $x == 3 { ^false } else { $x } }
> def a_3 [x] { if $x == 3 { [1 2 3] | each {error make {msg: 'a custom error inside list stream'} } } }
> def b [--list-stream --external] {
if $external == true {
# error with non-zero exit code, which is generated from external command.
a_2 1; a_2 3; a_2 2
} else if $list_stream == true {
# error generated by list-stream
a_3 1; a_3 3; a_3 2
} else {
# error generated by command directly
a 1; a 2; a 3
}
}
```
Run `b` directly shows the following error:
<details>
```nushell
Error: chained_error
× oops
╭─[entry #27:1:1]
1 │ b
· ┬
· ╰── error happened when running this
╰────
Error: chained_error
× oops
╭─[entry #26:10:19]
9 │ # error generated by command directly
10 │ a 1; a 2; a 3
· ┬
· ╰── error happened when running this
11 │ }
╰────
Error:
× a custom error
╭─[entry #6:1:26]
1 │ def a [x] { if $x == 3 { error make {msg: 'a custom error'}}}
· ─────┬────
· ╰── originates from here
╰────
```
</details>
Run `b --list-stream` shows the following error
<details>
```nushell
Error: chained_error
× oops
╭─[entry #28:1:1]
1 │ b --list-stream
· ┬
· ╰── error happened when running this
╰────
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #26:7:16]
6 │ # error generated by list-stream
7 │ a_3 1; a_3 3; a_3 2
· ─┬─
· ╰── source value
8 │ } else {
╰────
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #23:1:29]
1 │ def a_3 [x] { if $x == 3 { [1 2 3] | each {error make {msg: 'a custom error inside list stream'} } } }
· ┬
· ╰── source value
╰────
Error:
× a custom error inside list stream
╭─[entry #23:1:44]
1 │ def a_3 [x] { if $x == 3 { [1 2 3] | each {error make {msg: 'a custom error inside list stream'} } } }
· ─────┬────
· ╰── originates from here
╰────
```
</details>
Run `b --external` shows the following error:
<details>
```nushell
Error: chained_error
× oops
╭─[entry #29:1:1]
1 │ b --external
· ┬
· ╰── error happened when running this
╰────
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #26:4:16]
3 │ # error with non-zero exit code, which is generated from external command.
4 │ a_2 1; a_2 3; a_2 2
· ─┬─
· ╰── source value
5 │ } else if $list_stream == true {
╰────
Error: nu:🐚:non_zero_exit_code
× External command had a non-zero exit code
╭─[entry #7:1:29]
1 │ def a_2 [x] { if $x == 3 { ^false } else { $x } }
· ──┬──
· ╰── exited with code 1
╰────
```
</details>
It also added a message to guide the usage of NU_BACKTRACE, see the last
line in the following example:
```shell
ls asdfasd
Error: nu:🐚:io::not_found
× I/O error
╰─▶ × Entity not found
╭─[entry #17:1:4]
1 │ ls asdfasd
· ───┬───
· ╰── Entity not found
╰────
help: The error occurred at '/home/windsoilder/projects/nushell/asdfasd'
set the `NU_BACKTRACE=1` environment variable to display a backtrace.
```
# Tests + Formatting
Added some tests for the behavior.
# After Submitting
# Description
I have investigated all const commands and found that math log contains
some duplicate code, which can be eliminated by introducing a new helper
function. So this pr is going to do this
# User-Facing Changes
NaN
# Tests + Formatting
NaN
# After Submitting
NaN
# Description
Parquet, CSV, NDJSON, and Arrow files can be written to AWS S3 via
`polars save`. This mirrors the s3 functionality provided by `polars
open`.
```nushell
ls | polars into-df | polars save s3://my-bucket/test.parquet
```
# User-Facing Changes
- S3 urls are now supported by `polars save`
Closes#14993
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
New keybinding has been added to `explore`
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Make `echo` const.
- It's a very simple command, there is no reason for it to not be const.
- It's return type `any` is utilized in tests to type erase values, this
might be useful for testing const evaluation too.
- The upcoming custom command attribute feature can make use of it as a
stopgap replacement for `const def` commands.
# User-Facing Changes
`echo` can be used in const contexts.
# Tests + Formatting
# After Submitting
N/A
# Description
- Add keybinding for `/` when in vi normal mode which activates the
history menu.
- Make keybinding `mode` (`edit_mode`) case-insensitive.
This keybinding exists both in vim and GNU Readline (e.g. bash) when in
vi normal mode. The reason this keybinding is getting added here (and
not in `reedline`) is because it triggers the history menu, and should
only be defined when the history menu exists. Menus are defined
externally to `reedline`.
# User-Facing Changes
Added keybinding for `/` when in vi normal mode which activates the
history menu.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
TODO: Update docs
# Description
As discussed
[here](https://github.com/nushell/nushell/pull/14856#issuecomment-2623393017)
and [here](https://github.com/nushell/nushell/discussions/14868).
I feel this method is generally better. As for the new-parser, we can
simply modify the implementation in `traverse.rs` to accommodate.
Next, I'm gonna overhaul the `Completer` trait, so before it gets really
messy, I' think this is the step to put this open for review so we can
check if I'm on track.
This PR closes#13897 (the `|` part)
# User-Facing Changes
# After Submitting
# Description
- Remove redundant fields from KnownExternal
- Command::extra_description and Command::search_terms using the
signature field
# User-Facing Changes
`extern` commands extra description is now shown in help text.
# Tests + Formatting
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds search terms for hide and hide-env.
Rel: #15013
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
N/A
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Tweaks the error style for I/O errors introduced #14927. Moves the
additional context to below the text that says "I/O error", and always
shows the error kind in the label.
Additional context|Before PR|After PR
:-:|:-:|:-:
yes|
|
no|
|
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
N/A, as this is a follow-up to #14927 which has not been included in a
release
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
N/A
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
---------
Co-authored-by: Piepmatz <git+github@cptpiepmatz.de>
# Description
Adds pipeline metadata to the `to html` command output (hardcoded to
`text/html; charset=utf-8`)
# User-Facing Changes
Pipeline metadata is now included with the `to html` command output.
# Description
This reverts back to serde_yaml from serde_yml.
Closes https://github.com/nushell/nushell/issues/14934
Reopen https://github.com/nushell/nushell/pull/14630
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes two changes related to [run-time pipeline input type
checking](https://github.com/nushell/nushell/pull/14741):
1. The check which bypasses type checking for commands with only
`Type::Nothing` input types has been expanded to work with commands with
multiple `Type::Nothing` inputs for different outputs. For example,
`ast` has three input/output type pairs, but all of the inputs are
`Type::Nothing`:
```
╭───┬─────────┬────────╮
│ # │ input │ output │
├───┼─────────┼────────┤
│ 0 │ nothing │ table │
│ 1 │ nothing │ record │
│ 2 │ nothing │ string │
╰───┴─────────┴────────╯
```
Before this PR, passing a value (which would otherwise be ignored) to
`ast` caused a run-time type error:
```
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #1:1:6]
1 │ echo 123 | ast -j -f "hi"
· ─┬─ ─┬─
· │ ╰── only nothing, nothing, and nothing input data is supported
· ╰── input type: int
╰────
```
After this PR, no error is raised.
This doesn't really matter for `ast` (the only other built-in command
with a similar input/output type signature is `cal`), but it's more
logically consistent.
2. Bypasses input type-checking (parse-time ***and*** run-time) for some
(not all, see below) commands which have both a `Type::Nothing` input
and some other non-nothing `Type` input. This is accomplished by adding
a `Type::Any` input with the same output as the corresponding
`Type::Nothing` input/output pair.
This is necessary because some commands are intended to operate on an
argument with empty pipeline input, or operate on an empty pipeline
input with no argument. This causes issues when a value is implicitly
passed to one of these commands. I [discovered this
issue](https://discord.com/channels/601130461678272522/615962413203718156/1329945784346611712)
when working with an example where the `open` command is used in
`sort-by` closure:
```nushell
ls | sort-by { open -r $in.name | lines | length }
```
Before this PR (but after the run-time input type checking PR), this
error is raised:
```
Error: nu:🐚:only_supports_this_input_type
× Input type not supported.
╭─[entry #1:1:1]
1 │ ls | sort-by { open -r $in.name | lines | length }
· ─┬ ──┬─
· │ ╰── only nothing and string input data is supported
· ╰── input type: record<name: string, type: string, size: filesize, modified: date>
╰────
```
While this error is technically correct, we don't actually want to
return an error here since `open` ignores its pipeline input when an
argument is passed. This would be a parse-time error as well if the
parser was able to infer that the closure input type was a record, but
our type inference isn't that robust currently, so this technically
incorrect form snuck by type checking until #14741.
However, there are some commands with the same kind of type signature
where this behavior is actually desirable. This means we can't just
bypass type-checking for any command with a `Type::Nothing` input. These
commands operate on true `null` values, rather than ignoring their
input. For example, `length` returns `0` when passed a `null` value.
It's correct, and even desirable, to throw a run-time error when
`length` is passed an unexpected type. For example, a string, which
should instead be measured with `str length`:
```nushell
["hello" "world"] | sort-by { length }
# => Error: nu:🐚:only_supports_this_input_type
# =>
# => × Input type not supported.
# => ╭─[entry #32:1:10]
# => 1 │ ["hello" "world"] | sort-by { length }
# => · ───┬─── ───┬──
# => · │ ╰── only list<any>, binary, and nothing input data is supported
# => · ╰── input type: string
# => ╰────
```
We need a more robust way for commands to express how they handle the
`Type::Nothing` input case. I think a possible solution here is to allow
commands to express that they operate on `PipelineData::Empty`, rather
than `Value::Nothing`. Then, a command like `open` could have an empty
pipeline input type rather than a `Type::Nothing`, and the parse-time
and run-time pipeline input type checks know that `open` will safely
ignore an incorrectly typed input.
That being said, we have a release coming up and the above solution
might take a while to implement, so while unfortunate, bypassing input
type-checking for these problematic commands serves as a workaround to
avoid breaking changes in the release until a more robust solution is
implemented.
This PR bypasses input type-checking for the following commands:
* `load-env`: can take record of envvars as input or argument
* `nu-check`: checks input string or filename argument
* `open`: can take filename as input or argument
* `polars when`: can be used with input, or can be chained with another
`polars when`
* `stor insert`: data record can be passed as input or argument
* `stor update`: data record can be passed as input or argument
* `format date`: `--list` ignores input value
* `into datetime`: `--list` ignores input value (also added a
`Type::Nothing` input which was missing from this command)
These commands have a similar input/output signature to the above
commands, but are working as intended:
* `cd`: The input/output signature was actually incorrect, `cd` always
ignores its input. I fixed this in this PR.
* `generate`
* `get`
* `history import`
* `interleave`
* `into bool`
* `length`
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
As a temporary workaround, pipeline input type-checking for the
following commands has been bypassed to avoid undesirable run-time input
type checking errors which were previously not caught at parse-time:
* `open`
* `load-env`
* `format date`
* `into datetime`
* `nu-check`
* `stor insert`
* `stor update`
* `polars when`
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
CI became green in the time it took me to type the description 😄
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
# Description
I'm on rust toolchain 1.8.4, and I can see clippy warnings that can't be
caught by the ci workflow, primarily related to lifetime params.
I think it doesn't hurt to fix those in advance.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
This PR closes#14956, only one known issue on that list remains.
# User-Facing Changes
# Tests + Formatting
new cases added
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
When using `find`, we insert ansi code.
This is great for visual but it make comparison a tedious task.
For exemple
```nu
> ([{a: 1 b: 1}] | find 1 | get 0 | get a) == 1
# false
```
The documentation recommand using the `ansi strip` command but you then
lose your typing converting it to a string.
```nu
> [{a: 1 b: 1}] | find 1 | get 0 | get a | ansi strip | describe
# string
```
And this makes me very sad 😢 .
The idea here is to have a simple option to keep the usage of `find`
without the ansi marking.
```nu
> ([{a: 1 b: 1}] | find --raw 1 | get 0 | get a) == 1
# true
```
Tbh I think we could also do a fix on the parser to really escape the
ansi makers but this sounded like way more work so I would like your
opinion on this before working on it.
Also note that this is my first time writting rust and trying to
contribute to nushell so if you see any weird shenanigans be sure to
tell me !
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
A new flag for find
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
For testing I updated all the previous `find` test to also run them with
this new flag just to be sure that we didn't lose any other
functionalities
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Tangui <mael.nicolas@clever-cloud.com>
- fixes#14769
# Description
## Bugs
- `str substring 0..<0`
When passed a range containing no elements, for non-zero cases `str
substring` behaves correctly:
```nushell
("hello world" | str substring 1..<1) == ""
# => true
```
but if the range is `0..<0`, it returns the whole string instead
```nushell
"hello world" | str substring 0..<0
# => hello world
```
- `[0 1 2] | range 0..<0`
Similar behavior to `str substring`
- `str index-of`
- off-by-one on end bounds
- underflow on negative start bounds
- `bytes at` has inconsistent behavior, works correctly when the size is
known, returns one byte less when it's not known (streaming)
This can be demonstrated by comparing the outputs of following snippets
```nushell
"hello world" | into binary | bytes at ..<5 | decode
# => hello
"hello world" | into binary | chunks 1 | bytes collect | bytes at ..<5 |
decode
# => hell
```
- `bytes at` panics on decreasing (`5..3`) ranges if the input size is
known. Does not panic with streaming input.
## Changes
- implement `FromValue` for `IntRange`, as it is very common to use
integer ranges as arguments
- `IntRange::absolute_start` can now point one-past-end
- `IntRange::absolute_end` converts relative `Included` bounds to
absolute `Excluded` bounds
- `IntRange::absolute_bounds` is a convenience method that calls the
other `absolute_*` methods and transforms reverse ranges to empty at
`start` (`5..3` => `5..<5`)
- refactored `str substring` tests to allow empty exclusive range tests
- fix the `0..<0` case for `str substring` and `str index-of`
- `IntRange::distance` never returns `Included(0)`
As a general rule `Included(n) == Excluded(n + 1)`.
This makes returning `Included(0)` bug prone as users of the function
will likely rely on this general rule and cause bugs.
- `ByteStream::slice` no longer has an off-by-one on inputs without a
known size. This affected `bytes at`.
- `bytes at` no longer panics on reverse ranges
- `bytes at` is now consistent between streaming and non streaming
inputs.
# User-Facing Changes
There should be no noticeable changes other than the bugfix.
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR returns error values while checking pipeline input types and
positional argument types. This should help return non-nested errors
earlier and prevent confusing errors.
The positional argument change is directly related to an example given
on Discord. Before this PR, this is the error shown:
```
Error: nu:🐚:cant_convert
× Can't convert to record.
╭─[/home/rose/tmp/script.nu:23:5]
22 │ let entry = $in
23 │ ╭─▶ {
24 │ │ name: $entry,
25 │ │ details: {
26 │ │ context: $context
27 │ │ }
28 │ ├─▶ }
· ╰──── can't convert error to record
29 │ }
╰────
```
After this PR, this is the error shown:
```
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[/home/rose/tmp/script.nu:23:5]
22 │ let entry = $in
23 │ ╭─▶ {
24 │ │ name: $entry,
25 │ │ details: {
26 │ │ context: $context
27 │ │ }
28 │ ├─▶ }
· ╰──── source value
29 │ }
╰────
Error: nu:🐚:type_mismatch
× Type mismatch.
╭─[/home/rose/tmp/much.nu:3:38]
2 │ $in | each { |elem|
3 │ print $elem.details.context.yaml.0
· ┬
· ╰── Can't access record values with a row index. Try specifying a column name instead
4 │ } | each { |elem|
╰────
```
I'm not certain if the pipeline input error check actually can ever be
triggered, but it seems to be a good defensive error handling strategy
regardless. My addition of the `Value::Error` case in the first place
would suggest it can be, but after looking at it more closely the error
that caused me to add the case in the first place was actually unrelated
to input typechecking.
Additionally, this PR does not affect the handling of nested errors, so
something like:
```nushell
try { ... } catch {|e| $e | reject raw | to nuon }
```
works the same before and after this PR.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Errors values detected as arguments to commands or as pipeline input to
commands are immediately thrown, rather than passed to the command.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
N/A
# Description
Closes#14957
Allows for moving columns to the start and end of a table/record. Adds
additional tests for the new flags and refactors the already existing
tests to assert on a vec of columns rather then asserting one by one.
# User-Facing Changes
Addition: New `--first` and `--last` flags for `move` which allow you to
move columns to the start or end without the need to specify the first
or last columns.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Could add one of the new flags to the already existing [Nushell
Fundamentals move
section](https://www.nushell.sh/book/working_with_tables.html#moving-columns).
---------
Signed-off-by: Coca <coca16622@gmail.com>
# Description
This PR fixes#14784.
<img width="384" alt="image"
src="https://github.com/user-attachments/assets/aac063a0-645d-4adb-a399-525bdb004999"
/>
Also fixes the related behavior of lsp:
completion won't work in match/else blocks, because:
1. truncation in completion causes unmatched `{`, thus a parse error.
2. the parse error further leads to a state where the whole block
expression marked as garbage
<img width="453" alt="image"
src="https://github.com/user-attachments/assets/aaf86ccc-646e-4b91-bb27-4b1737100ff2"
/>
Related PR: #14856, @tmillr
I don't have any background knowledge of those `propagate_error`,
@sgvictorino you may want to review this.
# User-Facing Changes
# Tests + Formatting
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
It seems in my PR #14927 I missed a few calls to `IoError::new` that had
`Span::unknown` inside them, which shouldn't be used but rather
`IoError::new_internal`. I replaced these calls.
Thanks to @132ikl to finding out that I forgot some. 😄
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Pretty much none really.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
## Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes completion for when the cursor is inside a block:
```nu
foo | each { open -<Tab> }
```
```nu
print (open -<Tab>)
print [5, 'foo', (open -<Tab>)]
```
etc.
Fixes: #11084
Related: #13897 (partially fixes—leading `|` is a different issue)
Related: #14643 (different issue not fixed by this pr)
Related: #14822
## User-Facing Changes
Flag/command completion (internal) inside blocks has been fixed.
## Tests + Formatting
<!--
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
As far as I can tell there is only 1 test that's failing (locally), but
it has nothing to do with my pr and is failing before my changes are
applied. The test is `completions::variables_completions`. It's because
I'm missing `$nu.user-autoload-dirs`.
`std/core` is always loaded by Nushell during startup, and the
commands in it are always available. As such, it's renamed
`std/prelude`.
`scope modules` and `view files` now show `prelude` in place of
`core`.
# Description
For nu scripts completion with command `use`/`overlay use`/`source-env`,
it now supports `nu --include-path`.
Also fixes some irrelevant clippy complaints.
# User-Facing Changes
# Tests + Formatting
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
As an avid `cargo doc` enjoyer I realized we had some doc warnings, so I
fixed them.
After this PR `cargo doc --workspace` should stop throwing warnings.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No code changes.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
We could add a `cargo doc` CI pipeline but usually running a full `cargo
doc` takes like forever, so maybe we don't want that.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
As mentioned in #10698, we have too many `ShellError` variants, with
some even overlapping in meaning. This PR simplifies and improves I/O
error handling by restructuring `ShellError` related to I/O issues.
Previously, `ShellError::IOError` only contained a message string,
making it convenient but overly generic. It was widely used without
providing spans (#4323).
This PR introduces a new `ShellError::Io` variant that consolidates
multiple I/O-related errors (except for `ShellError::NetworkFailure`,
which remains distinct for now). The new `ShellError::Io` variant
replaces the following:
- `FileNotFound`
- `FileNotFoundCustom`
- `IOInterrupted`
- `IOError`
- `IOErrorSpanned`
- `NotADirectory`
- `DirectoryNotFound`
- `MoveNotPossible`
- `CreateNotPossible`
- `ChangeAccessTimeNotPossible`
- `ChangeModifiedTimeNotPossible`
- `RemoveNotPossible`
- `ReadingFile`
## The `IoError`
`IoError` includes the following fields:
1. **`kind`**: Extends `std::io::ErrorKind` to specify the type of I/O
error without needing new `ShellError` variants. This aligns with the
approach used in `std::io::Error`. This adds a second dimension to error
reporting by combining the `kind` field with `ShellError` variants,
making it easier to describe errors in more detail. As proposed by
@kubouch in [#design-discussion on
Discord](https://discord.com/channels/601130461678272522/615329862395101194/1323699197165178930),
this helps reduce the number of `ShellError` variants. In the error
report, the `kind` field is displayed as the "source" of the error,
e.g., "I/O error," followed by the specific kind of I/O error.
2. **`span`**: A non-optional field to encourage providing spans for
better error reporting (#4323).
3. **`path`**: Optional `PathBuf` to give context about the file or
directory involved in the error (#7695). If provided, it’s shown as a
help entry in error reports.
4. **`additional_context`**: Allows adding custom messages when the
span, kind, and path are insufficient. This is rendered in the error
report at the labeled span.
5. **`location`**: Sometimes, I/O errors occur in the engine itself and
are not caused directly by user input. In such cases, if we don’t have a
span and must set it to `Span::unknown()`, we need another way to
reference the error. For this, the `location` field uses the new
`Location` struct, which records the Rust file and line number where the
error occurred. This ensures that we at least know the Rust code
location that failed, helping with debugging. To make this work, a new
`location!` macro was added, which retrieves `file!`, `line!`, and
`column!` values accurately. If `Location::new` is used directly, it
issues a warning to remind developers to use the macro instead, ensuring
consistent and correct usage.
### Constructor Behavior
`IoError` provides five constructor methods:
- `new` and `new_with_additional_context`: Used for errors caused by
user input and require a valid (non-unknown) span to ensure precise
error reporting.
- `new_internal` and `new_internal_with_path`: Used for internal errors
where a span is not available. These methods require additional context
and the `Location` struct to pinpoint the source of the error in the
engine code.
- `factory`: Returns a closure that maps an `std::io::Error` to an
`IoError`. This is useful for handling multiple I/O errors that share
the same span and path, streamlining error handling in such cases.
## New Report Look
This is simulation how the I/O errors look like (the `open crates` is
simulated to show how internal errors are referenced now):
## `Span::test_data()`
To enable better testing, `Span::test_data()` now returns a value
distinct from `Span::unknown()`. Both `Span::test_data()` and
`Span::unknown()` refer to invalid source code, but having a separate
value for test data helps identify issues during testing while keeping
spans unique.
## Cursed Sneaky Error Transfers
I removed the conversions between `std::io::Error` and `ShellError` as
they often removed important information and were used too broadly to
handle I/O errors. This also removed the problematic implementation
found here:
7ea4895513/crates/nu-protocol/src/errors/shell_error.rs (L1534-L1583)
which hid some downcasting from I/O errors and made it hard to trace
where `ShellError` was converted into `std::io::Error`. To address this,
I introduced a new struct called `ShellErrorBridge`, which explicitly
defines this transfer behavior. With `ShellErrorBridge`, we can now
easily grep the codebase to locate and manage such conversions.
## Miscellaneous
- Removed the OS error added in #14640, as it’s no longer needed.
- Improved error messages in `glob_from` (#14679).
- Trying to open a directory with `open` caused a permissions denied
error (it's just what the OS provides). I added a `is_dir` check to
provide a better error in that case.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Error outputs now include more detailed information and are formatted
differently, including updated error codes.
- The structure of `ShellError` has changed, requiring plugin authors
and embedders to update their implementations.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I updated tests to account for the new I/O error structure and
formatting changes.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR closes#7695 and closes#14892 and partially addresses #4323 and
#10698.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
This fixes#14039
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
Pressing `esc` or `q` in expand and try view no longer closes explore.
This is not intentional
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR fixes#14816 , so that expression-contains-position check won't
need special treatment for keyword expressions.
e.g.
```nushell
overlay use foo as bar
# |_______ cursor here
if true { } else { }
# |_______ here
```
as mentioned in #14924
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
This PR enables basic goto def/hover features on module name in
commands:
1. hide
2. overlay use
3. overlay hide
## Some pending issues
1. Somewhat related to #14816
```nushell
overlay use foo as bar
# |_______ cursor here
```
fails to work, since the position of the cursor is outside of the whole
span of this call expression.
I'll try to fix#14816 later instead of implementing new weird
workarounds.
2. references/renaming however is still buggy on overlays with
`as`/`--prefix` features enabled.
# User-Facing Changes
# Tests + Formatting
3 more tests
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds a new command that outputs a NuDataFrame or NuLazyFrame in
its repr format, which can then be ingested in another polars instance.
Advantages of serializing a dataframe in this format are that it can be
viewed as a table, carries type information, and can easily be copied to
the clipboard.
```nushell
# In Nushell
> [[a b]; [2025-01-01 2] [2025-01-02 4]] | polars into-df | polars into-lazy | polars into-repr
shape: (2, 2)
┌─────────────────────┬─────┐
│ a ┆ b │
│ --- ┆ --- │
│ datetime[ns] ┆ i64 │
╞═════════════════════╪═════╡
│ 2025-01-01 00:00:00 ┆ 2 │
│ 2025-01-02 00:00:00 ┆ 4 │
└─────────────────────┴─────┘
```
```python
# In python
>>> import polars as pl
>>> df = pl.from_repr("""
... shape: (2, 2)
... ┌─────────────────────┬─────┐
... │ a ┆ b │
... │ --- ┆ --- │
... │ datetime[ns] ┆ i64 │
... ╞═════════════════════╪═════╡
... │ 2025-01-01 00:00:00 ┆ 2 │
... │ 2025-01-02 00:00:00 ┆ 4 │
... └─────────────────────┴─────┘""")
shape: (2, 2)
┌─────────────────────┬─────┐
│ a ┆ b │
│ --- ┆ --- │
│ datetime[ns] ┆ i64 │
╞═════════════════════╪═════╡
│ 2025-01-01 00:00:00 ┆ 2 │
│ 2025-01-02 00:00:00 ┆ 4 │
└─────────────────────┴─────┘
>>> df.select(pl.col("a").dt.offset_by("12m"))
shape: (2, 1)
┌─────────────────────┐
│ a │
│ --- │
│ datetime[ns] │
╞═════════════════════╡
│ 2025-01-01 00:12:00 │
│ 2025-01-02 00:12:00 │
└─────────────────────┘
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
A new command `polars into-repr` is added. No other commands are
impacted by the changes in this PR.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Examples were added in the command definition.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
In a few places, `nu-path` uses `unsafe` to do reference casts. This PR
adds the [`ref-cast`](https://crates.io/crates/ref-cast) crate to do
reference casts in a "safe" manner.
# Description
This PR replaces most of the constants in `ResolvedImportPattern` from
values to VarIds, this has benefits of:
1. less duplicated variables in state
2. precise span of variable, for example when calling `goto def` on a
const imported by the `use` command, this allows it to find the original
definition, instead of where the `use` command is.
Note that the logic is different here for nested submodules, not all
values are flattened and propagated to the outmost record variable, but
I didn't find any differences in real world usage.
I noticed that it was changed from `VarId` to `Value` in #10049.
Maybe @kubouch can find some edge cases where this PR fails to work as
expected.
In my view, the record constants for `ResolvedImportPattern` should even
reduced to single entry, if not able to get rid of.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Fixes#14909 with the same technique used in #12820 for `stor insert`.
Single quotes (and others) now work properly in strings passed to `stor
update`. Also did some minor refactoring on `stor insert` so it matches
the changes in `stor update`.
# User-Facing Changes
Bug-fix.
# Tests + Formatting
Test added for this scenario.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Closes#14595. This modifies the behavior of both custom and external
completers so that if the custom/external completer returns an invalid
value, completions are suppressed and an error is logged. However, if
the completer returns `null` (which this PR treats as a special value),
we fall back to file completions.
Previously, custom completers and external completers had different
behavior. Any time an external completer returned an invalid value
(including `null`), we would fall back to file completions. Any time a
custom completer returned an invalid value (including `null`), we would
suppress completions.
I'm not too happy about the implementation, but it's the least intrusive
way I could think of to do it. I added a `fallback` field to
`CustomCompletions` that's checked after calling its `fetch()` method.
If `fallback` is true, then we use file completions afterwards.
An alternative would be to make `CustomCompletions` no longer implement
the `Completer` trait, and instead have its `fetch()` method return an
`Option<Vec<Suggestion>>`. But that resulted in a teeny bit of code
duplication.
# User-Facing Changes
For those using an external completer, if they want to fall back to file
completions on invalid values, their completer will have to explicitly
return `null`. Returning `"foo"` or something will no longer make
Nushell use file completions instead.
For those making custom completers, they now have the option to fall
back to file completions.
# Tests + Formatting
Added some tests and manually tested that if the completer returns an
invalid value or the completer throws an error, that gets logged and
completions are suppressed.
# After Submitting
The documentation for custom completions and external completers will
have to be updated after this.
# Description
With the fragmentation and proliferation of social media platforms,
we're attempting to consolidate our news and official Nushell
communications to:
* The Nushell website, with updates posted on the Blog
* Discord
* GitHub
This PR replaces Twitter with the Nushell Blog in the welcome banner.
The other links were already available.
# User-Facing Changes
Welcome banner
# Tests + Formatting
# After Submitting
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR seeks to generalize the `seq date` command so that it can
receive any duration as an `--increment`. Whereas the current command
can only output a list of dates spaced at least 1 day apart, the new
command can output a list of datetimes that are spaced apart by any
duration.
For example:
```
> seq date --begin-date 2025-01-01 --end-date 2025-01-02 --increment 6hr --output-format "%Y-%m-%d %H:%M:%S"
╭───┬─────────────────────╮
│ 0 │ 2025-01-01 00:00:00 │
│ 1 │ 2025-01-01 06:00:00 │
│ 2 │ 2025-01-01 12:00:00 │
│ 3 │ 2025-01-01 18:00:00 │
│ 4 │ 2025-01-02 00:00:00 │
╰───┴─────────────────────╯
```
Note that the default behavior remains unchanged:
```
> seq date --begin-date 2025-01-01 --end-date 2025-01-02
╭───┬────────────╮
│ 0 │ 2025-01-01 │
│ 1 │ 2025-01-02 │
╰───┴────────────╯
```
The default output format also remains unchanged:
```
> seq date --begin-date 2025-01-01 --end-date 2025-01-02 --increment 6hr
╭───┬────────────╮
│ 0 │ 2025-01-01 │
│ 1 │ 2025-01-01 │
│ 2 │ 2025-01-01 │
│ 3 │ 2025-01-01 │
│ 4 │ 2025-01-02 │
╰───┴────────────╯
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
## Breaking Changes
* The `--increment` argument no longer accepts just an integer and
requires a duration
```
# NEW BEHAVIOR
> seq date --begin-date 2025-01-01 --end-date 2025-01-02 --increment 1
Error: nu::parser::parse_mismatch
× Parse mismatch during operation.
╭─[entry #13:1:68]
1 │ seq date --begin-date 2025-01-01 --end-date 2025-01-02 --increment 1
· ┬
· ╰── expected duration with valid units
╰────
```
EDIT: Break Change is mitigated. `--increment` accepts either an integer
or duration.
## Bug Fix
* The `--days` argument had an off-by-one error and would print 1 too
many elements in the output. For example,
```
# OLD BEHAVIOR
> seq date -b 2025-01-01 --days 5 --increment 1
╭───┬────────────╮
│ 0 │ 2025-01-01 │
│ 1 │ 2025-01-02 │
│ 2 │ 2025-01-03 │
│ 3 │ 2025-01-04 │
│ 4 │ 2025-01-05 │
│ 5 │ 2025-01-06 │ <-- Extra element
╰───┴────────────╯
# NEW BEHAVIOR
> seq date -b 2025-01-01 --days 5 --increment 1day
╭───┬────────────╮
│ 0 │ 2025-01-01 │
│ 1 │ 2025-01-02 │
│ 2 │ 2025-01-03 │
│ 3 │ 2025-01-04 │
│ 4 │ 2025-01-05 │
╰───┴────────────╯
```
## New Argument
* A `--periods` argument is introduced to indicate the number of output
elements, regardless of the `--increment` value. Importantly, the
`--days` argument is ignored when `--periods` is set.
```
# NEW BEHAVIOR
> seq date -b 2025-01-01 --days 5 --periods 10 --increment 1day
╭───┬────────────╮
│ 0 │ 2025-01-01 │
│ 1 │ 2025-01-02 │
│ 2 │ 2025-01-03 │
│ 3 │ 2025-01-04 │
│ 4 │ 2025-01-05 │
│ 5 │ 2025-01-06 │
│ 6 │ 2025-01-07 │
│ 7 │ 2025-01-08 │
│ 8 │ 2025-01-09 │
│ 9 │ 2025-01-10 │
╰───┴────────────╯
```
Note that the `--days` and `--periods` arguments differ in their
functions. The `--periods` value determines the number of elements in
the output that are always spaced `--increment` apart. The `--days`
value determines the bookends `--begin-date` and `--end-date` when only
one is set, though the number of elements may differ based on the
`--increment` value.
```
# NEW BEHAVIOR
> seq date -e 2025-01-01 --days 2 --increment 5hr --output-format "%Y-%m-%d %H:%M:%S"
╭───┬─────────────────────╮
│ 0 │ 2025-01-23 22:25:05 │
│ 1 │ 2025-01-24 03:25:05 │
│ 2 │ 2025-01-24 08:25:05 │
│ 3 │ 2025-01-24 13:25:05 │
│ 4 │ 2025-01-24 18:25:05 │
╰───┴─────────────────────╯
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I added several examples for each user-facing change in
`generators/seq_date.rs` and some tests in `tests/commands/seq_date.rs`.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Closes#14904. The bug there was introduced by #14846, which replaced
skim with Nucleo. It turns out that Nucleo's `Pattern::new` function
doesn't treat the needle as a single atom - it splits on spaces and
makes each word its own atom. This PR fixes the problem by creating a
single `Atom` for the whole needle rather than creating a `Pattern`.
Because of the bug, when you typed `lines <TAB>` (with a space at the
end), the suggestion `lines` was also matched. This suggestion was
shorter than the original typed needle, which would cause an
out-of-bounds error.
This also meant that if you typed `foo bar<TAB>`, `foo aaaaa bar` would
be shown before `foo bar aaa`. At the time, I didn't realize that it was
more intuitive to have `foo bar aaa` be put first.
# User-Facing Changes
Typing something like `lines <TAB>` should no longer cause a panic.
# Tests + Formatting
- Added a test to ensure spaces are respected when fuzzy matching
- Updated a test with the changed sort order for subcommand suggestions
# After Submitting
No need to update docs.
# Description
This PR adds those markdown doc strings (previously only available via
hover) to completion items:
<img width="676" alt="image"
src="https://github.com/user-attachments/assets/58c44d7d-4b49-4955-b3f0-fa7a727a8bc0"
/>
It also refactors a bit, primarily to prevent namespace pollution.
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
this PR should close#14315
This PR enhances the start command in Nushell to handle both files and
URLs more effectively, including support for custom URL schemes.
Previously, the start command only reliably opened HTTP and HTTPS URLs,
and custom schemes like Spotify and Obsidian which were not handled
earlier.
1. **Custom URL Schemes Support:**
- Added support for opening custom URL schemes
2. **Detailed Error Messages:**
- Improved error reporting for failed external commands.
- Captures and displays error output from the system to aid in
debugging.
**Example**
**Opening a custom URL scheme (e.g., Spotify):**
```bash
start spotify:track:4PTG3Z6ehGkBFwjybzWkR8?si=f9b4cdfc1aa14831
```
Opens the specified track in the Spotify application.
**User-Facing Changes**
- **New Feature:** The start command now supports opening URLs with
custom schemes
# Description
This PR supersedes https://github.com/nushell/nushell/pull/14813 by
making it a built-in command instead of checking for the latest version
at some interval when nushell starts.
This is what it looks like.
This example shows the output when the running version was
0.101.1-nightly.10
Description from old PR.
One key functionality that I thought was interesting with this and that
I worked with @hustcer on was to try and make sure it works with
nightlies. So, it should tell you when there's a new nightly version
that is available to download. This way, you can know about it without
checking.
What's key from a nightly perspective is (1) the tags are now semver
compliant and (2) hustcer now updates the Cargo.toml package.version
version number prior to compilation so you can know you're running a
nightly version, and this PR uses that information to know whether to
check the nightly repo or the nushell repo for updates.
This uses the
[update-informer](https://docs.rs/update-informer/latest/update_informer/)
crate. NOTE that this _informs_ you of updates but does not
automatically update. I kind of see this as the first step to eventually
having an auto updater.
There was caching of the version in the old PR since it ran on every
nushell startup. Since this PR makes it a command and therefore always
runs on-demand, I've removed the caching so that it always checks when
you run it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This is a minor feature that highlights all occurrences of current
variable/command in current file:
<img width="346" alt="image"
src="https://github.com/user-attachments/assets/f1078e79-d02e-480e-b84a-84efb222c9a4"
/>
Since this kind of request happens a lot with fixed document content, to
avoid unnecessary parsing, this PR caches the `StateDelta` to the
server.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Can be disabled on the client side.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Implementation is directly borrowed from `references`, only one simple
test case added.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR cleans up the code surrounding formatting and displaying file
sizes.
- The `byte_unit` crate we use for file size units displays kilobytes as
`KB`, which is not the SI or ISO/IEC standard. Rather it should be `kB`,
so this fixes#8872. On some systems, `KB` actually means `KiB`, so this
avoids any potential confusion.
- The `byte_unit` crate, when displaying file sizes, casts integers to
floats which will lose precision for large file sizes. This PR adds a
custom `Display` implementation for `Filesize` that can give an exact
string representation of a `Filesize` for metric/SI units.
- This PR also removes the dependency on the `byte_unit` crate which
brought in several other dependencies.
Additionally, this PR makes some changes to the config for filesize
formatting (`$env.config.filesize`).
- The previous filesize config had the `metric` and `format` options. If
a metric (SI) unit was set in `format`, but `metric` was set to false,
then the `metric` option would take precedence and convert `format` to
the corresponding binary unit (or vice versa). E.g., `{ format: kB,
metric: false }` => `KiB`. Instead, this PR adds the `unit` option to
replace the `format` and `metric` options. `unit` can be set to a fixed
file size unit like `kB` or `KiB`, or it can be set to one of the
special options: `binary` or `metric`. These options tells nushell to
format file sizes using an appropriately scaled metric or binary unit
(examples below).
```nushell
# precision = null
# unit = kB
1kB # 1 kB
1KiB # 1.024 kB
# unit = KiB
1kB # 0.9765625 KiB
1KiB # 1 KiB
# unit = metric
1000B # 1 kB
1024B # 1.024 kB
10_000MB # 10 GB
10_240MiB # 10.73741824 GB
# unit = binary
1000B # 1000 B
1024B # 1 KiB
10_000MB # 9.313225746154785 GiB
10_240MiB # 10 GiB
```
- In addition, this PR also adds the `precision` option to the filesize
config. It determines how many digits to show after the decimal point.
If set to null, then everything after the decimal point is shown.
- The default filesize config is `{ unit: metric, precision: 1 }`.
# User-Facing Changes
- Commands that use the config to format file sizes will follow the
changes described above (e.g., `table`, `into string`, `to text`, etc.).
- The file size unit/format passed to `format filesize` is now case
sensitive. An error with the valid units is shown if the case does not
match.
- `$env.config.filesize.format` and `$env.config.filesize.metric` are
deprecated and replaced by `$env.config.filesize.unit`.
- A new `$env.config.filesize.precision` option was added.
# Tests + Formatting
Mostly updated test expected outputs.
# After Submitting
This PR does not change the way NUON serializes file sizes, because that
would require changing the nu parser to be able to losslessly decode the
new, exact string representation introduced in this PR.
Similarly, this PR also does not change the file size parsing in any
way. Although the file size units provided to `format filesize` or the
filesize config are now case-sensitive, the same is not yet true for
file size literals in nushell code.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
A simple method found by @tmillr to solve [this
issue](https://github.com/nushell/nushell/discussions/14854)
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I didn't find a suitable place in `nu-parser` to add the test case,
placed in `nu-lsp` instead.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Sorry was a little bit busy
close#14842
I've added a test but I'd check if it solved it.
cc: @fdncred
__________________________
**Unrelated**
Recently got a pretty good format idea
(https://github.com/zhiburt/tabled/issues/472)
Just wanna highlight that we could probably experiment with it, if it
being a bit elaborated.
It's sort of KV table which nushell already has,
But it's more for a default table where each row/record being rendered
as a KV table.
It's not something super nice I guess but maybe it could get some
appliance.
So yes pointing it out just in case.
Like these.
```
┌──────────────┬───────────────────────────────────────────────┐
│ Field │ Value │
├──────────────┼───────────────────────────────────────────────┤
│ Company │ INTEL CORP │
├──────────────┼───────────────────────────────────────────────┤
│ Street │ 2200 MISSION COLLEGE BLVD, RNB-4-151 │
├──────────────┼───────────────────────────────────────────────┤
│ City │ SANTA CLARA │
├──────────────┼───────────────────────────────────────────────┤
│ ZIP code │ 95054 │
┣━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┫
│ Company │ Apple Inc. │
├──────────────┼───────────────────────────────────────────────┤
│ Street │ ONE APPLE PARK WAY │
├──────────────┼───────────────────────────────────────────────┤
│ City │ CUPERTINO │
├──────────────┼───────────────────────────────────────────────┤
│ ZIP code │ 95014 │
└──────────────┴───────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────┐
│ INTEL CORP │
├──────────────┬───────────────────────────────────────────────┤
│ Street │ 2200 MISSION COLLEGE BLVD, RNB-4-151 │
├──────────────┼───────────────────────────────────────────────┤
│ City │ SANTA CLARA │
├──────────────┼───────────────────────────────────────────────┤
│ ZIP code │ 95054 │
├──────────────┴───────────────────────────────────────────────┤
│ Apple Inc. │
├──────────────┬───────────────────────────────────────────────┤
│ Street │ ONE APPLE PARK WAY │
├──────────────┼───────────────────────────────────────────────┤
│ City │ CUPERTINO │
├──────────────┼───────────────────────────────────────────────┤
│ ZIP code │ 95014 │
└──────────────┴───────────────────────────────────────────────┘
```
PS: Now thinking about it,
it's sort of like doing a iteration over rows and building a current KV
table,
Which is interesting cause we could do it row by row, in which case
doing CTRLC would not ruin build but got some data rendered.
All though it's a different kind of approach. Just saying.
Bumps [similar](https://github.com/mitsuhiko/similar) from 2.6.0 to
2.7.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/mitsuhiko/similar/blob/main/CHANGELOG.md">similar's
changelog</a>.</em></p>
<blockquote>
<h2>2.7.0</h2>
<ul>
<li>Add optional support for <code>web-time</code> to support web WASM
targets. <a
href="https://redirect.github.com/mitsuhiko/similar/issues/73">#73</a></li>
<li>Crate will no longer panic wheh deadlines are used in WASM. At worst
deadlines are silently ignored. To enforce deadlines enable the
<code>wasm32_web_time</code> feature. <a
href="https://redirect.github.com/mitsuhiko/similar/issues/74">#74</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="28c146b628"><code>28c146b</code></a>
2.7.0</li>
<li><a
href="3ec4464a26"><code>3ec4464</code></a>
Added another changelog entry</li>
<li><a
href="5077768172"><code>5077768</code></a>
Add wasm tests (<a
href="https://redirect.github.com/mitsuhiko/similar/issues/74">#74</a>)</li>
<li><a
href="2b2881a375"><code>2b2881a</code></a>
Added web-time changelog entry</li>
<li><a
href="177ce9e700"><code>177ce9e</code></a>
Add wasm32_web_time feature (<a
href="https://redirect.github.com/mitsuhiko/similar/issues/73">#73</a>)</li>
<li><a
href="717757e156"><code>717757e</code></a>
Another clippy fix</li>
<li><a
href="157f01564d"><code>157f015</code></a>
Make clippy happier (<a
href="https://redirect.github.com/mitsuhiko/similar/issues/72">#72</a>)</li>
<li>See full diff in <a
href="https://github.com/mitsuhiko/similar/compare/2.6.0...2.7.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes a bug: renaming on a flag variable removes the leading
`--` in the signature.
<img width="257" alt="image"
src="https://github.com/user-attachments/assets/767c62de-f3a0-4a07-9786-61b21e8cfcb6"
/>
Gets the following before this PR:
```nushell
export def foooo [
p: int
] {
$p
}
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Should fix#14872.
## Before
The vendor autoload code in #13382 used `dirs::data_dir()`
(from the `dirs` crate), leading to a different behavior when
`XDG_DATA_HOME` is set on each platform.
* On Linux, the `dirs` crate automatically uses `XDG_DATA_HOME` for
`dirs::data_dir()`, so everything worked as expected.
* On macOS, `dirs` doesn't use the XDG spec, but the vendor autoload
code from #13382 specifically added `XDG_DATA_HOME`. However, even if
`XDG_DATA_HOME` was set, vendor autoloads would still use the `dirs`
version *as well*.
* On Windows, `XDG_DATA_HOME` was ignored completely by vendor
autoloads, even though `$nu.data-dirs` was respecting it.
## After
This PR uses `nu::data_dirs()` on all platforms. `nu::data_dirs()`
respects `XDG_DATA_HOME` (if set) on all platforms.
# User-Facing Changes
Might be a breaking change if someone was depending on the old behavior,
but the doc already specified the behavior in this PR.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
https://github.com/nushell/nushell/pull/14845#issuecomment-2596371878
When the input to `into cell-path` is a cell-path, it will return it
like other into commands.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Before, using `into cell-path` with a cell-path as input would return an
error, now it will return the input.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
https://github.com/nushell/nushell/pull/14845#issuecomment-2596371878
When the input to `into glob` is a glob, it will return it like other
into commands.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Before, using `into glob` with a glob as input would return an error,
now it will return the input.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR renames `fmt` to `format number`, to bring it in line with
similar value formatting commands and make it more discoverable.
# User-Facing Changes
* The `fmt` command is now `format number`. A deprecation warning will
be thrown if you use `fmt`.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fixes an issue with #14669 - I mistakenly used `dirs::config_dir()` when
it should be `nu_path::config_dir()`. This allows `XDG_CONFIG_DIR` to
specify the location properly.
# User-Facing Changes
Fix: If `XDG_CONFIG_DIR` is set, it will be used for the `autoload`
location.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes the issue of the missing references in `use` command
<img width="832" alt="image"
src="https://github.com/user-attachments/assets/f67cd4b3-2e50-4dda-b2ed-c41aee86d3e9"
/>
However, as described in [this
discussion](https://github.com/nushell/nushell/discussions/14854), the
returned reference list is still not complete due to the inconsistent
IDs.
As a side effect, `hover/goto def` now also works on the `use` command
arguments
<img width="752" alt="image"
src="https://github.com/user-attachments/assets/e0abdc9e-097a-44c2-9084-8d7905ae1d5e"
/>
Actions including `goto def/hover/references/rename` now work with
module (maybe some edge cases of `overlay` are not covered)
<img width="571" alt="image"
src="https://github.com/user-attachments/assets/b4edb9b7-1540-4c52-bf8b-145bc6a1ad4a"
/>
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added
1. the test for heavy requests cancellation.
2. expected Edit for the missing ref of `use` to the existing rename
test.
3. `goto/hover` on module name
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
`tower-lsp` seems not well-maintained, I ended up with a dedicated
thread for heavy computing and message passing to cancel it on any new
request.
During the progress, interrupting with edits or new requests.
<img width="522" alt="image"
src="https://github.com/user-attachments/assets/b263d73d-8ea3-4b26-a7b7-e0b30462d1af"
/>
Goto references are still blocking, with a hard timeout of 5 seconds.
Only locations found within the time limit are returned. Technically,
reference requests allow for responses with partial results, which means
instant responsiveness. However, the `lsp_types` crate hasn’t enabled
this. I believe I can still enable it with some JSON manipulation, but
I’ll leave it for future work.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Need some clever way to test the cancellation, no test cases added yet.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR replaces `SkimMatcherV2` from the
[fuzzy-matcher](https://docs.rs/fuzzy-matcher/latest/fuzzy_matcher/)
crate with the
[nucleo-matcher](https://docs.rs/nucleo-matcher/latest/nucleo_matcher/)
crate for doing fuzzy matching. This touches both our completion code in
`nu-cli` and symbol filtering in `nu-lsp`.
Nucleo should give us better performance than Skim. In the event that we
decide to use the Nucleo frontend ([crate
docs](https://docs.rs/nucleo/latest/nucleo/)) too, it also works on
Windows, unlike [Skim](https://github.com/skim-rs/skim), which appears
to only support Linux and MacOS.
Unfortunately, we still have an indirect dependency on `fuzzy-matcher`,
because the [`dialoguer`](https://github.com/console-rs/dialoguer) crate
uses it.
# User-Facing Changes
No breaking changes. Suggestions will be sorted differently, because
Nucleo uses a different algorithm from Skim for matching/scoring.
Hopefully, the new sorting will generally make more sense.
# Tests + Formatting
In `nu-cli`, modified an existing test, but didn't test performance. I
haven't tested `nu-lsp` manually, but existing tests pass.
I did manually do `ls /nix/store/<TAB>`, `ls /nix/store/d<TAB>`, etc.,
but didn't notice Nucleo being faster (my `/nix/store` folder has 34136
items at the time of writing).
# Description
Fixes: #14844
The issue occurs when nushell is parsing a value with
`SyntaxShape::Any`, it checks `Duration` and `Filesize` first, then
`Range`. Nushell raises errors too early while parsing
`Duration/Filesize`.
This pr changes the order of parsing to fix the issue.
# User-Facing Changes
The following code should be able to run after this pr
```nushell
let runs = 10;
1..$runs
```
# Tests + Formatting
Added 2 tests, one for filesize, one for duration.
# After Submitting
NaN
# Description
As the `range` command has an ambiguous name (does it construct a range
type?, does it iterate a range like `seq`) replace it with a more
descriptive verb of what it does: `slice`
Closes#14130
# User-Facing Changes
`range` is now deprecated and replaced in whole by `slice` with the same
behavior.
`range` will be removed in `0.103.0`
# Tests + Formatting
Tests have been updated to use `slice`
# After submitting
- [ ] prepare PR for `nu_scripts` (several usages of `range` to be
fixed)
- [ ] update documentation usages of `range` after release
# Description
This PR add 2 new operators, `has` and `not-has`. They are basically
`in` and `not-in` with the order of operands swapped.
Motivation for this was the awkward way of searching for rows that
contain an item using `where`
```nushell
[[name, children]; [foo, [a, b, c]], [bar [d, e, f]]]
| where ("e" in $it.children)
```
vs
```nushell
[[name, children]; [foo, [a, b, c]], [bar [d, e, f]]]
| where children has "e"
```
# User-Facing Changes
Added `has` and `not-has` operators, mirroring `in` and `not-in`.
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
# Description
- Closes#14839
When the input to `into datetime` is a datetime, it will return it like
other `into` commands.
# User-Facing Changes
Before, using `into datetime` with a datetime as input would return an
error, now it will return the input.
# Tests + Formatting
Added test `takes_datetime`.
# After Submitting
Doc file is automatically generated.
- fixes#14801
# Description
- Fixed the issue
- Added some comments mirroring the ones used in `export-env` handling
in `use`
- Added two tests to prevent regressions
# User-Facing Changes
# Tests + Formatting
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
goto reference:
<img width="885" alt="image"
src="https://github.com/user-attachments/assets/6f85cd10-0c2d-46b2-b99e-47a9bbf90822"
/>
rename:
<img width="483" alt="image"
src="https://github.com/user-attachments/assets/828e7586-c2b7-414d-9085-5188b10f5f5f"
/>
Caveats:
1. Module reference/rename is not supported yet
2. names in `use` command should also be renamed, which is not handled
now
3. workspace wide actions can be time-consuming, as it requires parsing
of all `**/*.nu` files in the workspace (if its text contains the name).
Added a progress bar for such requests.
4. In case these requests are triggered accidentally in a root folder
with a large depth, I hard-coded the max depth to search to 5 right now.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Limited test cases
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This simply replaces uses of the deprecated function `current_dir_str`
with `EngineState::cwd_as_string` in `run_shell_integration_*`
functions. The main difference being that the latter does not
canonicalize paths.
Fixes#14619
Bumps [data-encoding](https://github.com/ia0/data-encoding) from 2.6.0
to 2.7.0.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/ia0/data-encoding/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR replaces the home-grown icons in the `grid` command with the
`devicons` crate.
### Before
### After
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
- closes#8523
# Description
This PR adds pipeline input support to `generate`.
- Without input, `generate` keeps its current behavior.
- With input, each invocation of the closure is provided an item from
the input stream as pipeline input (`$in`). If/when the input stream
runs out, `generate` also stops.
Before this PR, there is no filter command that is both stateful _and_
streaming.
This PR also refactors `std/iter scan` to use `generate`, making it
streaming and more performant over larger inputs.
# User-Facing Changes
- `generate` now supports pipeline input, passing each element to the
closure as `$in` until it runs out
- `std/iter scan` is now streaming
# Tests + Formatting
Added tests to validate the new feature.
- 🟢 toolkit fmt
- 🟢 toolkit clippy
- 🟢 toolkit test
- 🟢 toolkit test stdlib
# After Submitting
N/A
# Description
This pr is going to add a new command named `help pipe-and-redirect`.
So user can detect such feature easier.
# User-Facing Changes
Here is the output of this command:
```
╭───┬────────┬──────────────────────────────────────┬──────────────────────────────────────────────────────────────┬─────────────────────╮
│ # │ symbol │ name │ description │ example │
├───┼────────┼──────────────────────────────────────┼──────────────────────────────────────────────────────────────┼─────────────────────┤
│ 0 │ | │ pipe │ pipeline stdout of a command to another command │ ^cmd1 | ^cmd2 │
│ 1 │ e>| │ stderr pipe │ pipeline stderr of a command to another command │ ^cmd1 e>| ^cmd2 │
│ 2 │ o+e>| │ stdout and stderr pipe │ pipeline stdout and stderr of a command to another command │ ^cmd1 o+e>| ^cmd2 │
│ 3 │ o> │ redirection │ redirect stdout of a command, overwriting a file │ ^cmd1 o> file.txt │
│ 4 │ e> │ stderr redirection │ redirect stderr of a command, overwriting a file │ ^cmd1 e> file.txt │
│ 5 │ o+e> │ stdout and stderr redirection │ redirect stdout and stderr of a command, overwriting a file │ ^cmd1 o+e> file.txt │
│ 6 │ o>> │ redirection append │ redirect stdout of a command, appending to a file │ ^cmd1 o> file.txt │
│ 7 │ e>> │ stderr redirection append │ redirect stderr of a command, appending to a file │ ^cmd1 e> file.txt │
│ 8 │ o+e>> │ stdout and stderr redirection append │ redirect stdout and stderr of a command, appending to a file │ ^cmd1 o+e> file.txt │
│ 9 │ o>| │ │ Unsupported, it's the same to `|`, use it instead │ │
├───┼────────┼──────────────────────────────────────┼──────────────────────────────────────────────────────────────┼─────────────────────┤
│ # │ symbol │ name │ description │ example │
╰───┴────────┴──────────────────────────────────────┴──────────────────────────────────────────────────────────────┴─────────────────────╯
```
# Tests + Formatting
# After Submitting
Should update more examples in [nushell
doc](https://www.nushell.sh/lang-guide/chapters/pipelines.html) to fill
more examples
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Follow-up PR of #14789
The span of `$it/$in` is set to a 0-width one with start/end pointing to
the start of its scope, mainly for error messages positioning.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR is a follow on to https://github.com/nushell/nushell/pull/14423
and finishes removing the `terminal_size` crate in favor of
`crossterm`'s `size()`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes a corner case of goto definition in lsp server.
```nushell
let foo = 1
match $foo {
_ if $foo == 1 => 1
# |_______________ goto definition does not work here
_ => 2
}
```
Since `match_pattern.guard` is not handled in this function (which could
be another issue).
23dc1b600a/crates/nu-parser/src/flatten.rs (L604-L658)
In this PR, however, finding leaf expression at the cursor is done with
the new AST traversing helper functions.
Theoretically, this is faster as the flattening and filtering are
combined in a single scan; the difference could be negligible though.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
3 new test cases added, will add more if new issues found.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This is a complementary PR of #14802
<img width="418" alt="image"
src="https://github.com/user-attachments/assets/ddf945e4-7ef0-4c73-a9fd-e68591efce03"
/>
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
new relative test cases
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR should address #13530 by explicitly handling ByteStreams.
The issue can be replicated easily on linux by running:
```nushell
open /dev/urandom | into binary | bytes at ..10
```
Would leave the output hanging and with no way to cancel it, this was
likely because it was trying to collect the input stream and would not
complete.
I have also put in an error to say that using negative offsets for a
bytestream without a length cannot be used.
```nushell
~/git/nushell> open /dev/urandom | into binary | bytes at (-1)..
Error: nu:🐚:incorrect_value
× Incorrect value.
╭─[entry #3:1:35]
1 │ open /dev/urandom | into binary | bytes at (-1)..
· ────┬─── ───┬──
· │ ╰── encountered here
· ╰── Negative range values cannot be used with streams that don't specify a length
╰────
```
# User-Facing Changes
No operation changes, only the warning you get back for negative offsets
# Tests + Formatting
Ran `toolkit check pr ` with no errors or warnings
Manual testing of the example commands above
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
Co-authored-by: Simon Curtis <simon.curtis@candc-uk.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR fixes an issue introduced by #14770 , as shown in
https://github.com/nushell/nushell/pull/14802#issuecomment-2585270161
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
The PR follows our standard of bumping the rust compiler when a new one
is released.
/cc @ayax79 @sholderbach
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds inlay hints of variable types and parameter names to
lsp-server
<img width="547" alt="image"
src="https://github.com/user-attachments/assets/07a0dd84-5ecc-47df-a8a7-732631715662"
/>
Some design choices I made:
* for composite types like `record<foo: <record ...>>`, only a short
name displayed. Full signature already available through `hover`
* only parameter names of user defined commands are returned, feels too
much distraction if enabled for all builtins
* some information are lost in flattened expressions, so I implemented
my AST traversing functions, which may seem unnecessary, but I can't
find alternatives from the existing code.
* another minor change: added a line separator to current hover markdown
message.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users who think this feature annoying now have to manually turn it off
(or config the lsp client capabilities).
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR addresses the issue of inconsistent spans of special variables
of `$in/$in`, as discussed in
https://github.com/nushell/nushell/pull/14770#discussion_r1908729364.
Instead of making the `declaration_span` to be Option, which will cause
too many changes that we may want to avoid, this PR set the spans to be
`unknown`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
No
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
