Commit Graph

6665 Commits

Author SHA1 Message Date
Darren Schroeder
5e70d4121a
Add dfr to dataframe cmds (#7998)
# Description

This PR tries to resolve the overloading issue by going back to our
original naming convention for dataframes. So, this PR renames all
dataframe commands with a prefix of `dfr`. Some commands like `open-df`
were renamed to `dfr open` and things like `into df` were renamed `dfr
into-df`. I'm sure we can optimize naming a bit, but it seems to compile
now.

# User-Facing Changes

All dataframe commands are prefixed with dfr.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-08 15:52:57 -06:00
Reilly Wood
f9b5d8bc5e
Add comment explaining background thread usage for plugin calls (#7878)
~~I happened to be reviewing our uses of `thread::spawn()` and came to
the conclusion that we're spawning a thread unnecessarily for plugin
calls. We were basically doing this:~~

~~1. Spawn a background thread to send data to the plugin over stdin~~
~~2. Immediately do a blocking wait for the plugin's response~~

~~As far as I can tell, there's no point in spawning a thread for 1 (and
it may harm error handling) given that we're blocking right away for the
response.~~

**Update:** the logic is correct, as confirmed by @WindSoilder
[here](https://discord.com/channels/601130461678272522/855947301380947968/1072743414795350037).
I've added a comment explaining the thread usage.
2023-02-08 08:53:44 -08:00
dependabot[bot]
2917c045fb
Bump actions-rust-lang/setup-rust-toolchain from 1.3.5 to 1.3.7 (#7979) 2023-02-08 13:03:05 +00:00
Maxim Zhiburt
6e6ef862c5
Address #7997 (#8000)
Hi there,

The case which was presented must be addressed.

But I did not test it properly...
I'd encourage you to do so.

Take care.

---------

Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
2023-02-07 20:01:31 -06:00
Jérémy Audiger
a7fdca05c6
http: add --insecure flag to http get, share common code (#7992)
# Description

I factorized the HTTP client from HTTP Post and HTTP Get into a common
file, in order to reduce the code duplication. This PR has to be looked
commit by commit.

# User-Facing Changes

A new option has been to HTTP Get: `--insecure`. This option was already
available for HTTP Post command.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-07 14:22:19 -08:00
Stefan Holderbach
ddc33dc74a
Fix imported virtualenv testsuite (#8001)
# Description

Patch `pyproject.toml` to ignore the checking of coverage level as we
only run part of the test suite affecting nushell.
2023-02-07 23:14:17 +01:00
Reilly Wood
a562f492e3
Windows: handle illegal filenames a little better (#7999)
This PR is an incremental improvement to `ls` when it encounters
'illegal' file paths on Windows. Related:
https://github.com/nushell/nushell/issues/7869

## Context

We have trouble with filenames that Windows doesn't like, for example
[files with a `.` at the end of their
name](https://learn.microsoft.com/en-us/windows/win32/fileio/naming-a-file#naming-conventions).
To make a long story short, the Rust stdlib and several Win32 APIs will
choke if asked to do something with an illegal filepath. This is a
problem because files with illegal names can be created via other means
(like `touch foo.` in MINGW bash).

Previously `ls` would fail completely in a directory with a bad file,
which isn't great. After this PR, bad files get included in `ls` results
but without any metadata columns. This is not quite where we want to be
— eventually we want to be able to display file metadata for _all_ files
(even naughty ones) — but it's an improvement on the status quo.

### Before


![image](https://user-images.githubusercontent.com/26268125/217340906-26afd6d3-0ec3-454f-bed4-2bfcc9cf3a2f.png)

### After


![image](https://user-images.githubusercontent.com/26268125/217344373-6b81cc39-50b8-4390-8061-3e570502a784.png)

## Future work

Try the workarounds @ChrisDenton suggested:
https://github.com/nushell/nushell/issues/7869#issuecomment-1405977221

Some info on verbatim paths:
https://users.rust-lang.org/t/understanding-windows-paths/58583

## Testing

I tried to write a test for this, but it looks like our testing sandbox
can't create files with illegal filenames.😔 Here's the code in case it
proves useful someday:

```rust
/// Windows doesn't like certain file names, like file names ending with a period:
/// https://learn.microsoft.com/en-us/windows/win32/fileio/naming-a-file#naming-conventions
/// However, those files can still be created with tools like MINGW bash.
/// We may not be able to get full metadata for those files, but we should test that we can at least include them in ls results
#[test]
#[cfg(windows)]
fn can_list_illegal_files() {
    Playground::setup("ls_test_all_columns", |dirs, sandbox| {
        sandbox.with_files(vec![
            EmptyFile("foo"),
            EmptyFile("bar."),
            EmptyFile("baz"),
        ]);

        let actual = nu!(
            cwd: dirs.test(),
            "ls | length"
        );
        assert_eq!(actual.out, "3");

        let actual = nu!(
            cwd: dirs.test(),
            "ls"
        );
        assert_eq!(actual.out, "1");

        let actual = nu!(
            cwd: dirs.test(),
            "ls | where {|f| $f.name | str ends-with 'bar.'} | length"
        );
        assert_eq!(actual.out, "1");
    })
}
```
2023-02-07 12:30:37 -08:00
Reilly Wood
58f0d0b945
Fix $nu path separators on Windows (#7996)
I noticed that `$nu.loginshell-path` was using backward *and* forward
slashes on Windows.

#### Before
`C:\Users\reill\AppData\Roaming\nushell/login.nu`

#### After
`C:\Users\reill\AppData\Roaming\nushell\login.nu`

Fixed up 2 other similar issues while I was at it.
2023-02-07 11:50:39 -08:00
Amirhossein Akhlaghpour
67d1249b2b
Validate input range of du flags (#7962)
# Description
Fix #7953
Fix flags on `du` which should be positive and added some tests. 

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-06 21:34:32 +01:00
Darren Schroeder
66e5e42fb1
report which datetime couldn't be converted (#7980)
# Description

This PR will help report a bad date that can't be converted where the
error message says `* Unable to parse datetime`. This is helpful when
you're converting a big table and it fails somewhere that you really
can't see. I put it in `[]` so that when it's null, you can see that
there should be something there.

Before:
```
> 'Tue 1 0' | into datetime 
Error: nu:🐚:datetime_parse_error (link)

  × Unable to parse datetime
   ╭─[entry #1:1:1]
 1 │ 'Tue 1 0' | into datetime
   · ────┬────
   ·     ╰── datetime parsing failed
   ╰────
  help: Examples of supported inputs:
         * "5 pm"
         * "2020/12/4"
         * "2020.12.04 22:10 +2"
         * "2020-04-12 22:10:57 +02:00"
         * "2020-04-12T22:10:57.213231+02:00"
         * "Tue, 1 Jul 2003 10:52:37 +0200"
```
After:
```
> 'Tue 1 0' | into datetime
Error: nu:🐚:datetime_parse_error (link)

  × Unable to parse datetime: [Tue 1 0].
   ╭─[entry #4:1:1]
 1 │ 'Tue 1 0' | into datetime
   · ────┬────
   ·     ╰── datetime parsing failed
   ╰────
  help: Examples of supported inputs:
         * "5 pm"
         * "2020/12/4"
         * "2020.12.04 22:10 +2"
         * "2020-04-12 22:10:57 +02:00"
         * "2020-04-12T22:10:57.213231+02:00"
         * "Tue, 1 Jul 2003 10:52:37 +0200"
```

# User-Facing Changes

New format for the error message.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-06 14:17:07 -06:00
Nitin Londhe
1f01b6438f
Added fix for #7970 - Upgraded toml crate version from version from 0.5.8 to 0.7.1 for package nu-command (#7990)
# Description

Added fix for #7970 - Upgraded toml crate version from version from
0.5.8 to 0.7.1 for package nu-command

# Tests + Formatting

Added two tests to support the toml upgrade.

- `cargo test --package nu-command --lib -- formats::from::toml::tests
--nocapture`

Executed all tests.

- `cargo test --workspace`

---------

Co-authored-by: Nitin Londhe <nitin.londhe@genmills.com>
2023-02-06 14:15:14 -06:00
Jérémy Audiger
bea7ec33c1
Update few examples of math commands (#7987)
# Description

I just updated a few examples linked to math commands.

I used the character of pi where possible, and I updated one example
since the example was misleading IMO (for the tau command).

# User-Facing Changes

Only examples have been updated, there is no real user changes.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-06 13:43:00 +01:00
dependabot[bot]
b5561f35b9
Bump which from 4.3.0 to 4.4.0 (#7974) 2023-02-06 10:43:28 +00:00
Stefan Holderbach
b796cda060
Test return in reduce closure from #7961 (#7973)
# Description

Functionality added by @nabacg in #7961 already

h/t @YuriGeinishO for the example in #7933

Closes #7933


# User-Facing Changes

None

# Tests + Formatting

+1 end to end example
2023-02-06 11:01:08 +01:00
Stefan Holderbach
4c308b7f2f
Fix def-env docs according to docs#761 (#7972)
See nushell/nushell.github.io#761

# User-Facing Changes

Docs reflect up-to-date reality

Co-authored-by: Canop <cano.petrole@gmail.com>
2023-02-06 11:00:44 +01:00
dependabot[bot]
d50eb9b41b
Bump fs_extra from 1.2.0 to 1.3.0 (#7976) 2023-02-06 09:59:58 +00:00
Bram Geron
9168301369
Clarify two config fields (#7969)
In particular this makes the `show_banner` field more findable.

Users may search for "welcome" and "startup" which appear
in the banner.
2023-02-06 00:01:23 +01:00
Jakub Žádník
e8d930f659
Reorder help <keyword> priority (#7929)
# Description

`help <keyword>` will now search for `<keyword>` in aliases first, then
commands. This matches the way the parser resolves aliases before
commands.

# User-Facing Changes

Not significant
2023-02-05 23:51:09 +01:00
Amirhossein Akhlaghpour
aef88aa03e
Load env pwd (#7963)
# Description

Fixes #7940
avoid `load-env` to change PWD 

# User-Facing Changes

`{"PWD": whatever} | load-env` now fails
2023-02-05 23:40:46 +01:00
dependabot[bot]
ec4370069a
Bump tokio from 1.24.1 to 1.25.0 (#7958) 2023-02-05 21:22:37 +00:00
Hofer-Julian
c79ece2b21
Extract run blocks into functions (#7964)
As usual, Rust optimizes a bit less if more function boundaries are
introduced.
However, in my opinion, being able to comprehend the decision tree beats
a couple of string allocations.
2023-02-05 22:20:35 +01:00
Jérémy Audiger
99076af18b
Use imported names in Command::run signatures (#7967)
# Description

_(Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.)_

I opened this PR to unify the run command method. It's mainly to improve
consistency across the tree.

# User-Facing Changes

None.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-05 22:17:46 +01:00
Grzegorz Caban
a0e3ad2b70
return in reduce command closure (#7961)
# Description

Fix for #7933. I've read through code and found the obvious difference
between them, where `each` command calls eval_with_early_return
e89e734ca2/crates/nu-command/src/filters/each.rs (L158),
while `reduce` command uses eval_block
e89e734ca2/crates/nu-command/src/filters/reduce.rs (L143)

That simple change seems to resolve the problem. 

# User-Facing Changes

Allows the use of `return` in reduce closures, as per example in #7933
description. Arguably it's restoring consistency, than changing user
interface.

```
[1, 2] | reduce --fold null { |it, state|                                                           
::: if $it == 1 {
:::     return 10
::: }
::: return ($it * $state)
::: }
20
```

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

    

- [x] `cargo fmt --all -- --check` to check standard code formatting
(cargo fmt --all applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x]  `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-04 16:41:54 -06:00
Leon
e89e734ca2
Only abbreviate to "[table x rows]" if every value is a record (#7922)
# Description

Closes #6768.

BEFORE:
```
〉{ foo: [{a:1, b:2},2,3,4,5] }
╭─────┬────────────────╮
│ foo │ [table 5 rows] │
╰─────┴────────────────╯
```
AFTER:
```
〉{ foo: [{a:1, b:2},2,3,4,5] }
╭─────┬────────────────╮
│ foo │ [list 5 items] │
╰─────┴────────────────╯
```

# User-Facing Changes

See above.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 17:03:36 -06:00
Leon
9945241b77
Remove deprecated --numbered flag from four commands (#7777)
# Description

Remove `--numbered` from ~~`for`~~, `each`, `par-each`, `reduce` and
`each while`. These all provide indexes (numbering) via the optional
second param to their closures.

EDIT: Closes #6986.

# User-Facing Changes

Every command that had `--numbered` listed as "deprecated" in their help
docs is affected.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
2023-02-02 16:59:58 -06:00
Stefan Holderbach
215ed141e7
Fix code in benchmarks (#7949)
# Description

Broken after #7415

We currently don't try to build the benchmarks in the CI thus this
slipped through the cracks.


# User-Facing Changes

None

# Tests + Formatting

Compile check is currently missing, but working towards that
2023-02-02 23:07:35 +01:00
Hofer-Julian
f189ee67a1
Fix copy paste error (#7945) 2023-02-02 12:50:27 -06:00
Darren Schroeder
babc7d3baf
clean up the registry query output (#7939)
# Description

This cleans up the `registry query` output so that it's more usable.

Before:

![image](https://user-images.githubusercontent.com/343840/216129871-7cadcb68-a289-4e29-8857-6fc20b6a57f7.png)

After:

![image](https://user-images.githubusercontent.com/343840/216129814-70021706-f58a-4647-b5f1-a0e30f5fae16.png)


# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 07:10:38 -06:00
WindSoilder
8f4807020f
make do -i works with liststream (#7889)
# Description

Fixes: #7874 

It's because `do -i` doesn't handles `Pipeline::ListStream`
data(especially there is Value::Error inside the stream)

To fix it, we need to iterate through `ListStream`, check if there is
`Value::Error`. If so, just returns `Pipeline::empty()`

# User-Facing Changes

```
help commands | find arg | get search_terms | do -i { ansi strip }
```

No longer raises error.

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 00:04:53 +01:00
Kornél Csernai
31e1410191
respect use_ansi_coloring configuration (#7912)
# Description

Use the `use_ansi_coloring` configuration point to decide whether the
output will have colors, where possible.

Related: https://github.com/nushell/nushell/issues/7676


![image](https://user-images.githubusercontent.com/749306/215435128-cbf5f4b8-aafa-4718-bf23-3f0fd19b63ba.png)

- [x] `grid -c`
- [x] `perf()`

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 00:03:05 +01:00
pwygab
24d7227e27
ensure that when nu evaluates files, it allows early returns (#7415)
# Description

Fixes #7301.

# User-Facing Changes

`return` can now be used in scripts without explicit `def main`.

# Tests + Formatting

Don't forget to add tests that cover your changes. (I'm not sure how to
test this.)

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-02-02 00:02:27 +01:00
Amirhossein Akhlaghpour
c130ca1bc6
Fix: dst error on cp command (#7895)
Fixes #7693 

On `cp` commands there were two error which pass error message with
invalid detail about source and destination files . there error were for
Not exist file and Permission denied .

Examples:
  Before :
Copy `source_file_valid` to `destination_invalid_dir` throw this error ;
`copy file "/source_file_valid" failed: No such file or directory (os
error 2) `

 After this PR it will throw this if destination will be invalid :
`copying to destination "/destination_invalid_dir" failed: No such file
or directory (os error 2) `

it was for Permission denied too .

---------

Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
2023-02-01 21:48:21 +01:00
Kornél Csernai
4db960c0a6
use newer reedline (once available) (#7919)
# Description

Use newer reedline that fixes the code completion crash in
https://github.com/nushell/nushell/issues/7885 by subtracting from the
insertion point if the suggestion is shorter than the editor span.

Closes https://github.com/nushell/nushell/issues/7885

Depends on https://github.com/nushell/reedline/pull/534

# User-Facing Changes


# Tests + Formatting

Tested in reedline.

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.

---------

Co-authored-by: sholderbach <sholderbach@users.noreply.github.com>
2023-02-01 21:46:47 +01:00
Darren Schroeder
d13ce2aec9
add ability to view-source on closures (#7935)
closes https://github.com/nushell/nushell/issues/7934
2023-02-01 20:48:27 +02:00
Stefan Holderbach
5e957ecda6
Bump to 0.75.1 development version (#7930)
To demark development work or to be used with a point release in an
emergency
2023-01-31 23:55:29 +01:00
Stefan Holderbach
17a265b197
Version bump for 0.75 release (#7902)
- [x] Are we ready for the release
- [x] Upgrade to upcoming `reedline 0.15`
2023-01-31 21:00:59 +01:00
Darren Schroeder
3fabc8e1e6
update type check so that ++ with lists works better (#7926)
closes https://github.com/nushell/nushell/issues/7913
2023-01-31 21:11:05 +02:00
Jakub Žádník
517ef7cde7
Remove deprecated where -b parameter (#7927) 2023-01-31 21:05:28 +02:00
Stefan Holderbach
ad14b763f9
Pin reedline to new 0.15 for release (#7918)
# Description

See release notes:

https://github.com/nushell/reedline/releases/tag/v0.15.0
2023-01-30 22:59:15 +01:00
WindSoilder
f74694d5a3
Let redirection keep exit code (#7848)
# Description

Fixes: #7828

We delegate to `save` command to finish redirection, then if it runs to
success, the relative exit code is set to 0. To fix it, in redirection
context, we take exit_code stream before sending it to `save` command,
than manually returns `PipelineData::ExternalStream` to make nushell set
relative code properly.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-01-30 16:49:31 +01:00
Stefan Holderbach
1ea39abcff
Apply more recent/nightly clippy lints (#7916)
# Description

- Use inline format strings in dataframe code
- Fix manual `.is_ascii_digit()` check
- Remove unnecessary `.into_iter()` calls
2023-01-30 14:06:36 +01:00
Stefan Holderbach
7402589775
Bump trash to 3.0.1 (#7914)
# Description

Avoids duplication of `windows` crate and friends as it updates to the
most recent `windows 0.44` version.

# User-Facing Changes

None intended
2023-01-30 11:58:56 +01:00
dependabot[bot]
e0cd5a714a
Bump serial_test from 0.10.0 to 1.0.0 (#7910) 2023-01-30 02:47:51 +00:00
dependabot[bot]
c6eea5de6b
Bump typetag from 0.1.8 to 0.2.5 (#7908) 2023-01-30 02:46:31 +00:00
dependabot[bot]
809416e3f0
Bump roxmltree from 0.16.0 to 0.17.0 (#7909) 2023-01-30 02:43:11 +00:00
dependabot[bot]
040d812343
Bump windows from 0.43.0 to 0.44.0 (#7911) 2023-01-30 02:17:18 +00:00
dependabot[bot]
72465e6724
Bump chrono-tz from 0.6.3 to 0.8.1 (#7907) 2023-01-30 01:38:39 +00:00
Stefan Holderbach
ab480856a5
Use variable names directly in the format strings (#7906)
# Description

Lint: `clippy::uninlined_format_args`

More readable in most situations.
(May be slightly confusing for modifier format strings
https://doc.rust-lang.org/std/fmt/index.html#formatting-parameters)

Alternative to #7865

# User-Facing Changes

None intended

# Tests + Formatting

(Ran `cargo +stable clippy --fix --workspace -- -A clippy::all -D
clippy::uninlined_format_args` to achieve this. Depends on Rust `1.67`)
2023-01-29 19:37:54 -06:00
Stefan Holderbach
6ae497eedc
Remove unused nu-test-support in nu-table (#7905)
Unused dev-dependency
2023-01-29 23:36:46 +01:00
JT
421bc828ef
Use clippy-recommended simplification (#7904)
# Description

Just a couple clippy-recommended simplifications.

# User-Facing Changes

_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_

# Tests + Formatting

Don't forget to add tests that cover your changes.

Make sure you've run and fixed any issues with these commands:

- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass

# After Submitting

If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
2023-01-29 23:31:35 +01:00