This moves to predominantly supporting only lazy dataframes for most
operations. It removes a lot of the type conversion between lazy and
eager dataframes based on what was inputted into the command.
For the most part the changes will mean:
* You will need to run `polars collect` after performing operations
* The into-lazy command has been removed as it is redundant.
* When opening files a lazy frame will be outputted by default if the
reader supports lazy frames
A list of individual command changes can be found
[here](https://hackmd.io/@nucore/Bk-3V-hW0)
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
Fixes: #12744
This pr is moving raw string lex logic into `lex_item` function, so we
can use raw string inside subexpression, list, closure.
```nushell
> [r#'abc'#]
╭───┬─────╮
│ 0 │ abc │
╰───┴─────╯
> (r#'abc'#)
abc
> do {r#'aa'#}
aa
```
# Tests + Formatting
Done
# After Submitting
NaN
Time to expand our developer documentation, as some of this is still
tribal knowledge or things could otherwise slip through the cracks and
are costly to fix later.
# Description
Fixes: #12429
To fix the issue, we need to pass the `input pattern` itself to
`glob_from` function, but currently on latest main, nushell pass
`expanded path of input pattern` to `glob_from` function.
It causes globbing failed if expanded path includes `[]` brackets.
It's a pity that I have to duplicate `nu_engine::glob_from` function
into `ls`, because `ls` might convert from `NuGlob::NotExpand` to
`NuGlob::Expand`, in that case, `nu_engine::glob_from` won't work if
user want to ls for a directory which includes tilde:
```
mkdir "~abc"
ls "~abc"
```
So I need to duplicate `glob_from` function and pass original
`expand_tilde` information.
# User-Facing Changes
Nan
# Tests + Formatting
Done
# After Submitting
Nan
# Description
Does some misc changes to `ListStream`:
- Moves it into its own module/file separate from `RawStream`.
- `ListStream`s now have an associated `Span`.
- This required changes to `ListStreamInfo` in `nu-plugin`. Note sure if
this is a breaking change for the plugin protocol.
- Hides the internals of `ListStream` but also adds a few more methods.
- This includes two functions to more easily alter a stream (these take
a `ListStream` and return a `ListStream` instead of having to go through
the whole `into_pipeline_data(..)` route).
- `map`: takes a `FnMut(Value) -> Value`
- `modify`: takes a function to modify the inner stream.
# Description
This PR migrates the benchmark suit to Tango. Its different compared to
other framework because it require 2 binaries, to run to do A/B
benchmarking, this is currently limited to Linux, Max, (Windows require
rustc nightly flag), by switching between two suits it can reduce noise
and run the code "almost" concurrently. I have have been in contact with
the maintainer, and bases this on the dev branch, as it had a newer API
simular to criterion. This framework compared to Divan also have a
simple file dump system if we want to generate graphs, do other analysis
on later. I think overall this crate is very nice, a lot faster to
compile and run then criterion, that's for sure.
# Description
this PR
- moves the documentation from `lib.rs` to `README.md` while still
including it in the lib file, so that both the [crates.io
page](https://crates.io/crates/nuon) and the
[documentation](https://docs.rs/nuon/latest/nuon/) show the top-level
doc
- mention that comments are allowed in NUON
- add a JSON-NUON example
- put back the formatting of NOTE blocks in the doc
# User-Facing Changes
# Tests + Formatting
# After Submitting
# Description
Our current flattening code creates a bunch of intermediate `Vec`s for
each function call. These intermediate `Vec`s are then usually appended
to the current `output` `Vec`. By instead passing a mutable reference of
the `output` `Vec` to each flattening function, this `Vec` can be
reused/appended to directly thereby eliminating the need for
intermediate `Vec`s in most cases.
Followup to #12757
Always ensure that the `Cargo.toml` specifies the full minimum version
required to have the correct behavior or used features. Otherwise a
missing semver specifier is equal to `0` and could downgrade.
# Description
Make typos config more strict: ignore false positives where they occur.
1. Ignore only files with typos
2. Add regexp-s with context
3. Ignore variable names only in Rust code
4. Ignore only 1 "identifier"
5. Check dot files
🎁 Extra bonus: fix typos!!
# Description
Spaces were causing an issue with into_sqlite when they appeared in
column names.
This is because the column names were not properly wrapped with
backticks that allow sqlite to properly interpret the column.
The issue has been addressed by adding backticks to the column names of
into sqlite. The output of the column names when using open is
unchanged, and the column names appear without backticks as expected.
fixes#12700
# User-Facing Changes
N/A
# Tests + Formatting
Formatting has been respected.
Repro steps from the issue have been done, and ran multiple times. New
values get added to the correct columns as expected.
# Description
Bumps `base64` to 0.22.1 which fixes the alphabet used for binhex
encoding and decoding. This required updating some test expected output.
Related to PR #12469 where `base64` was also bumped and ran into the
failing tests.
# User-Facing Changes
Bug fix, but still changes binhex encoding and decoding output.
# Tests + Formatting
Updated test expected output.
PR https://github.com/nushell/nushell/pull/12603 made it so that PWD can
never contain a trailing slash. However, a root path (such as `/` or
`C:\`) technically counts as "having a trailing slash", so now `cd /`
doesn't work.
I feel dumb for missing such an obvious edge case. Let's just merge this
quickly before anyone else finds out...
EDIT: It appears I'm too late.
# Description
Fixes#12758.
#12662 introduced a bug where calling `cd` with a path with a trailing
slash would cause `PWD` to be set to a path including a trailing slash,
which is not allowed. This adds a helper to `nu_path` to remove this,
and uses it in the `cd` command to clean it up before setting `PWD`.
# Tests + Formatting
I added some tests to make sure we don't regress on this in the future.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
- fixes#11922
- fixes#12203
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This is a rewrite for some parts of the recursive completion system. The
Rust `std::path` structures often ignores things like a trailing `.`
because for a complete path, it implies the current directory. We are
replacing the use of some of these structs for Strings.
A side effect is the slashes being normalized in Windows. For example if
we were to type `foo/bar/b`, it would complete it to `foo\bar\baz`
because a backward slash is the main separator in windows.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Relative paths are preserved. `..`s in the paths won't eagerly show
completions from the parent path. For example, `asd/foo/../b` will now
complete to `asd/foo/../bar` instead of `asd/bar`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
I added some more tests to our mighty `polars` ~~, yet I don't know how
to add expected results in some of them. I would like to ask for help.~~
~~My experiments are in the last commit: [polars:
experiments](f7e5e72019).
Without those experiments `cargo test` goes well.~~
UPD. I moved out my unsuccessful test experiments into a separate
[branch](https://github.com/maxim-uvarov/nushell/blob/polars-tests-broken2/).
So, this branch seems ready for a merge.
@ayax79, maybe you'll find time for me please? It's not urgent for sure.
P.S. I'm very new to git. Please feel free to give me any suggestions on
how I should use it better
# Description
Judiciously try to avoid allocations/clone by changing the signature of
functions
- **Don't pass str by value unnecessarily if only read**
- **Don't require a vec in `Sandbox::with_files`**
- **Remove unnecessary string clone**
- **Fixup unnecessary borrow**
- **Use `&str` in shape color instead**
- **Vec -> Slice**
- **Elide string clone**
- **Elide `Path` clone**
- **Take &str to elide clone in tests**
# User-Facing Changes
None
# Tests + Formatting
This touches many tests purely in changing from owned to borrowed/static
data
Currently errors just create empty entries inside of resulting
dataframes.
This changeset is meant to help debug #12004, though generally speaking
I do think it's worth having ways to make errors be visible in this kind
of pipeline be visible
An example of what this looks like
<img width="954" alt="image"
src="https://github.com/nushell/nushell/assets/1408472/2c3c9167-2aaf-4f87-bab5-e8302d7a1170">
This is the first PR towards migrating to a new `$env.PWD` API that
returns potentially un-canonicalized paths. Refer to PR #12515 for
motivations.
## New API: `EngineState::cwd()`
The goal of the new API is to cover both parse-time and runtime use
case, and avoid unintentional misuse. It takes an `Option<Stack>` as
argument, which if supplied, will search for `$env.PWD` on the stack in
additional to the engine state. I think with this design, there's less
confusion over parse-time and runtime environments. If you have access
to a stack, just supply it; otherwise supply `None`.
## Deprecation of other PWD-related APIs
Other APIs are re-implemented using `EngineState::cwd()` and properly
documented. They're marked deprecated, but their behavior is unchanged.
Unused APIs are deleted, and code that accesses `$env.PWD` directly
without using an API is rewritten.
Deprecated APIs:
* `EngineState::current_work_dir()`
* `StateWorkingSet::get_cwd()`
* `env::current_dir()`
* `env::current_dir_str()`
* `env::current_dir_const()`
* `env::current_dir_str_const()`
Other changes:
* `EngineState::get_cwd()` (deleted)
* `StateWorkingSet::list_env()` (deleted)
* `repl::do_run_cmd()` (rewritten with `env::current_dir_str()`)
## `cd` and `pwd` now use logical paths by default
This pulls the changes from PR #12515. It's currently somewhat broken
because using non-canonicalized paths exposed a bug in our path
normalization logic (Issue #12602). Once that is fixed, this should
work.
## Future plans
This PR needs some tests. Which test helpers should I use, and where
should I put those tests?
I noticed that unquoted paths are expanded within `eval_filepath()` and
`eval_directory()` before they even reach the `cd` command. This means
every paths is expanded twice. Is this intended?
Once this PR lands, the plan is to review all usages of the deprecated
APIs and migrate them to `EngineState::cwd()`. In the meantime, these
usages are annotated with `#[allow(deprecated)]` to avoid breaking CI.
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
# Description
This fixes#12724. NetBSD confirmed to work with this change.
The update also behaves a bit better in some ways - it automatically
unlinks and reclaims sockets on Unix, and doesn't try to flush/sync the
socket on Windows, so I was able to remove that platform-specific logic.
They also have a way to split the socket so I could just use one socket
now, but I haven't tried to do that yet. That would be more of a
breaking change but I think it's more straightforward.
# User-Facing Changes
- Hopefully more platforms work
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
_cell paths_ can be easily serialized back and forth to NUON with the
leading `$.` syntax.
# User-Facing Changes
```nushell
$.foo.bar.0 | to nuon
```
and
```nushell
"$.foo.bar.0" | from nuon
```
are now possible
# Tests + Formatting
a new `cell_path` test has been added to `nuon`
# After Submitting
# Description
Nightly clippy found some unused fields leading me down a rabbit hole of
dead code hidden behind `pub`
Generally removing any already dead code or premature configurability
that is not exposed to the user.
# User-Facing Changes
None in effect.
Removed some options from the `$env.config.explore.hex-dump` record that
were only read into a struct but never used and also not validated.
# Description
Removes lazy records from the language, following from the reasons
outlined in #12622. Namely, this should make semantics more clear and
will eliminate concerns regarding maintainability.
# User-Facing Changes
- Breaking change: `lazy make` is removed.
- Breaking change: `describe --collect-lazyrecords` flag is removed.
- `sys` and `debug info` now return regular records.
# After Submitting
- Update nushell book if necessary.
- Explore new `sys` and `debug info` APIs to prevent them from taking
too long (e.g., subcommands or taking an optional column/cell-path
argument).
# Description
This helps to ensure data produced on a stream is immediately available
to the consumer of the stream. The BufWriter introduced for performance
reasons in 0.93 exposed the behavior that data messages wouldn't make it
to the other side until they filled the buffer in @cablehead's
[`nu_plugin_from_sse`](https://github.com/cablehead/nu_plugin_from_sse).
I had originally not flushed on every `Data` message because I figured
that it isn't really critical that the other side sees those messages
immediately, since they're not used for control and they are flushed
when waiting for acknowledgement or when the buffer is too full anyway.
Increasing the amount of data that can be sent with a single underlying
write increases performance, but this interferes with some plugins that
want to use streams in a more real-time way. In the future I would like
to make this configurable, maybe even per-command, so that a command can
decide what the priority is. But for now I think this is reasonable.
In the worst case, this decreases performance by about 40%, when sending
very small values (just numbers). But for larger values, this PR
actually increases performance by about 20%, because I've increased the
buffer size about 2x to 16,384 bytes. The previous value of 8,192 bytes
was too small to fit a full buffer coming from an external command, so
doubling it makes sense, and now a write of a buffer from an external
command can be done in exactly one write call, which I think makes
sense. I'm doing this at the same time because flushing each data
message would make it very likely that each individual data message from
an external stream would require exactly two writes rather than
approximately one (amortized).
Again, hopefully the tradeoff isn't too bad, and if it is I'll just make
it configurable.
# User-Facing Changes
- Performance of plugin streams will be a bit different
- Plugins that expect to send streams in real-time will work again
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
This PR overhauls the shell_integration system by allowing individual
control over which ansi escape sequences are used. As we continue to
broaden our support for more ansi escape sequences, we can't really have
an all-or-nothing strategy. Some ansi escapes cause problems in certain
operating systems or terminals. We should allow the user to choose which
escapes they want.
TODO:
* Gather feedback
* Should osc7, osc9_9 and osc633p be mutually exclusive?
* Is the naming convention for these settings too nerdy osc2, osc7, etc?
closes#11301
# User-Facing Changes
shell_integration is no longer a boolean value. This is what is
supported in the default_config.nu
```nushell
shell_integration: {
# osc2 abbreviates the path if in the home_dir, sets the tab/window title, shows the running command in the tab/window title
osc2: true
# osc7 is a way to communicate the path to the terminal, this is helpful for spawning new tabs in the same directory
osc7: true
# osc8 is also implemented as the deprecated setting ls.show_clickable_links, it shows clickable links in ls output if your terminal supports it
osc8: true
# osc9_9 is from ConEmu and is starting to get wider support. It's similar to osc7 in that it communicates the path to the terminal
osc9_9: false
# osc133 is several escapes invented by Final Term which include the supported ones below.
# 133;A - Mark prompt start
# 133;B - Mark prompt end
# 133;C - Mark pre-execution
# 133;D;exit - Mark execution finished with exit code
# This is used to enable terminals to know where the prompt is, the command is, where the command finishes, and where the output of the command is
osc133: true
# osc633 is closely related to osc133 but only exists in visual studio code (vscode) and supports their shell integration features
# 633;A - Mark prompt start
# 633;B - Mark prompt end
# 633;C - Mark pre-execution
# 633;D;exit - Mark execution finished with exit code
# 633;E - NOT IMPLEMENTED - Explicitly set the command line with an optional nonce
# 633;P;Cwd=<path> - Mark the current working directory and communicate it to the terminal
# and also helps with the run recent menu in vscode
osc633: true
# reset_application_mode is escape \x1b[?1l and was added to help ssh work better
reset_application_mode: true
}
```
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This PR adds raw string support by using `r#` at the beginning of single
quoted strings and `#` at the end.
Notice that escapes do not process, even within single quotes,
parentheses don't mean anything, $variables don't mean anything. It's
just a string.
```nushell
❯ echo r#'one\ntwo (blah) ($var)'#
one\ntwo (blah) ($var)
```
Notice how they work without `echo` or `print` and how they work without
carriage returns.
```nushell
❯ r#'adsfa'#
adsfa
❯ r##"asdfa'@qpejq'##
asdfa'@qpejq
❯ r#'asdfasdfasf
∙ foqwejfqo@'23rfjqf'#
```
They also have a special configurable color in the repl. (use single
quotes though)
They should work like rust raw literals and allow `r##`, `r###`,
`r####`, etc, to help with having one or many `#`'s in the middle of
your raw-string.
They should work with `let` as well.
```nushell
r#'some\nraw\nstring'# | str upcase
```
closes https://github.com/nushell/nushell/issues/5091
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect -A clippy::result_large_err` to check that
you're using the standard code style
- `cargo test --workspace` to check that all tests pass
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: WindSoilder <WindSoilder@outlook.com>
Co-authored-by: Ian Manske <ian.manske@pm.me>
Bumps [rmp-serde](https://github.com/3Hren/msgpack-rust) from 1.2.0 to
1.3.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="52de9be5a3"><code>52de9be</code></a>
Bump</li>
<li><a
href="c1b19aa3a8"><code>c1b19aa</code></a>
Update README</li>
<li><a
href="454e0c5e18"><code>454e0c5</code></a>
Smaller integer for depth</li>
<li><a
href="143897c5ab"><code>143897c</code></a>
Update README</li>
<li><a
href="7ddcd2ea4a"><code>7ddcd2e</code></a>
Decoder/inspector example</li>
<li><a
href="f9f02d8397"><code>f9f02d8</code></a>
Simplify Marker match by reusing discriminant</li>
<li><a
href="926682d1d6"><code>926682d</code></a>
Smaller write len</li>
<li><a
href="06414f584d"><code>06414f5</code></a>
Handle OOM when writing</li>
<li><a
href="80e00b3187"><code>80e00b3</code></a>
Bump</li>
<li><a
href="6dd81ee985"><code>6dd81ee</code></a>
Hack to use bytes</li>
<li>Additional commits viewable in <a
href="https://github.com/3Hren/msgpack-rust/compare/rmp-serde/v1.2.0...rmp-serde/v1.3.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
We have often had issues with winget during release, and have to fix the
Windows installers and then create new packages.
This runs `release-pkg.nu` for all eight Windows packages we release:
std and full, aarch64 and x86_64, and zip and msi variants.
It requires the cross compiling toolchain for MSVC to be installed,
since Rust generally needs that to build things on Windows. Use the
Visual Studio Installer to do so.
If there's ever a need, this can be extended for other platforms too.
This PR:
1. Adds basic support for `CustomValue` to `explore`. Previously `open
foo.db | explore` didn't really work, now we "materialize" the whole
database to a `Value` before loading it
2. Adopts `anyhow` for error handling in `explore`. Previously we were
kind of rolling our own version of `anyhow` by shoving all errors into a
`std::io::Error`; I think this is much nicer. This was necessary because
as part of 1), collecting input is now fallible...
3. Removes a lot of `explore`'s fancy command help system.
- Previously each command (`:help`, `:try`, etc.) had a sophisticated
help system with examples etc... but this was not very visible to users.
You had to know to run `:help :try` or view a list of commands with
`:help :`
- As discussed previously, we eventually want to move to a less modal
approach for `explore`, without the Vim-like commands. And so I don't
think it's worth keeping this command help system around (it's
intertwined with other stuff, and making these changes would have been
harder if keeping it).
4. Rename the `--reverse` flag to `--tail`. The flag scrolls to the end
of the data, which IMO is described better by "tail"
5. Does some renaming+commenting to clear up things I found difficult to
understand when navigating the `explore` code
I initially thought 1) would be just a few lines, and then this PR blew
up into much more extensive changes 😅
## Before
The whole database was being displayed as a single Nuon/JSON line 🤔
## After
The database gets displayed like a record
## Future work
It is sort of annoying that we have to load a whole SQLite database into
memory to make this work; it will be impractical for large databases.
I'd like to explore improvements to `CustomValue` that can make this
work more efficiently.
# Description
This PR:
* Updates to the latest cargo-wix
* Changes install method from perMachine to perUser
* Updates HKCU Path vs HKLM Path
* Updates Windows Terminal Fragment Json to be compatible with [their
spec](https://learn.microsoft.com/en-us/windows/terminal/json-fragment-extensions).
* Updates License year from 2022 to 2024
The result of these changes makes our Windows installer no longer prompt
with a UAC dialog and installs the binaries into
`%LocalAppData%\Programs\nu\bin`.
All of this is an attempt to make WinGet releases less error prone.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This creates an option for building binary data from byte integers.
Previously I think you could only do this by formatting the integers to
hex and using `decode hex`.
One potentially confusing thing is that this is different from the `into
binary` behavior. But since this doesn't support any of the other `into
binary` behaviors, it might be okay.
# User-Facing Changes
- `bytes build` accepts single byte arguments as integers
# Tests + Formatting
Example added.
# After Submitting
- [ ] release notes
This PR changes `nu_path::expand_path_with()` to no longer remove
trailing slashes. It also fixes bugs in the current implementation due
to ineffective tests (Fixes#12602).
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Prior, it seemed that nested errors would not get detected and shown.
This PR fixes that.
Resolves#10176:
```
~/CodingProjects/nushell> [[1,2]] | each {|x| $x | each {|y| error make {msg: "oh noes"} } } 05/04/2024 21:34:08
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:1:3]
1 │ [[1,2]] | each {|x| $x | each {|y| error make {msg: "oh noes"} } }
· ┬
· ╰── source value
╰────
Error: × oh noes
╭─[entry #1:1:36]
1 │ [[1,2]] | each {|x| $x | each {|y| error make {msg: "oh noes"} } }
· ─────┬────
· ╰── originates from here
╰────
```
Resolves#11224:
```
~/CodingProjects/nushell> [0] | each { |_| 05/04/2024 21:35:40
::: [0] | each { |_|
::: non-existent-command
::: }
::: }
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[entry #1:2:6]
1 │ [0] | each { |_|
2 │ [0] | each { |_|
· ┬
· ╰── source value
3 │ non-existent-command
╰────
Error: nu:🐚:external_command
× External command failed
╭─[entry #1:3:9]
2 │ [0] | each { |_|
3 │ non-existent-command
· ──────────┬─────────
· ╰── executable was not found
4 │ }
╰────
help: No such file or directory (os error 2)
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This PR changes `$env` to be **case-preserving** instead of
case-sensitive. That is, it preserves the case of the environment
variable when it is first assigned, but subsequent retrieval and update
ignores the case.
Notably, both `$env.PATH` and `$env.Path` can now be used to read or set
the environment variable, but child processes will always see the
correct case based on the platform.
Fixes#11268.
---
This feature was surprising simple to implement, because most of the
infrastructure to support case-insensitive cell path access already
exists. The `get` command extracts data using a cell path in a
case-insensitive way (!), but accepts a `--sensitive` flag. (I think
this should be flipped around?)
# Description
The command used to edit the Windows Terminal profiling was failing due
to the `open file | save -f file` metadata safeguard introduced in this
version. With this, the installer is now fixed again.
