# Description
Fixes: #8136
# User-Facing Changes
The following command
```
let VAR = ^cat non-existing-file; echo "failed"
```
will no longer output `failed` message
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Reilly Wood <reilly.wood@icloud.com>
# Description
GH Issue: [#8074](https://github.com/nushell/nushell/issues/8074)
Adding SIGINT Ctrl + C functionality to *most* of the `input` command.
`input` with the flags `--suppress-output` and `--bytes-until` are
executed in raw mode which allows a ^C signal to be caught as it's
input, but an "optionless" call of `input` is using a standard
`read_line()` method that takes a ^C input and clears the buffer of any
data collected before the ^C. I'm more than happy to alter the
"optionless" call but putting it in raw mode hides the user input, so at
the moment that's unchanged.
# User-Facing Changes
Now ^C anywhere in the stdin stream will cause the command to SIGINT (as
long as the command isn't optionless), rather than being read in as part
of the input.
```
/home/rdevenney/projects/open_source/nushell〉input --suppress-output
Error: nu:🐚:io_error (link)
× I/O error
help: SIGINT
```
```
/home/rdevenney/projects/open_source/nushell〉input --bytes-until "a"
Error: nu:🐚:io_error (link)
× I/O error
help: SIGINT
```
As mentioned above, the default input behavior is the same.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
close#8034
So it's actually a work around to do "our best".
We basically try 3 attemps to build a table with each time truncating
values bigger then (termwidth/2, termwidth/4, termwidth/8).
PS1: The logic is kind of not ideal need to think about it.
_______________
PS2:
I've just noticed that multi-line key behaves strangely; (not sure
whether it's caused by this wrap (unlikely))
Need to investigate this.
I'd bet it's a multiline key.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
As title, making default config simpler, and user can get custom
completion from here:
https://github.com/nushell/nu_scripts/tree/main/custom-completions Or
using carapace
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This change sorts completions for files and directories by the ascending
ordering method, related to issue:
[#8023](https://github.com/nushell/nushell/issues/8023)
Currently the Suggestions are being sorted twice, so it's now following
the convention from `completion/base.rs` to match on the
`self.get_sort_by()` result.
# User-Facing Changes
Previously the suggestions were being sorted by the Levenshtein method:
```
/home/rdevenney/projects/open_source/nushell| cd
src/ wix/ docs/ tests/
assets/ crates/ docker/ images/
target/ benches/ pkg_mgrs/ .git/
.cargo/ .github/
```
Now when you tab for autocompletions, they show up in ascending
alphabetical order as shown below (with hidden files/folders at the
end).
```
/home/rdevenney/projects/open_source/nushell| cd
assets/ benches/ crates/ docker/
docs/ images/ pkg_mgrs/ src/
target/ tests/ wix/ .cargo/
.git/ .github/
```
And when you've already typed a bit of the path:
```
/home/rdevenney/projects/open_source/nushell| cd crates/nu
crates/nu-cli/ crates/nu-color-config/ crates/nu-command/
crates/nu-engine/ crates/nu-explore/ crates/nu-glob/
crates/nu-json/ crates/nu-parser/ crates/nu-path/
crates/nu-plugin/ crates/nu-pretty-hex/ crates/nu-protocol/
crates/nu-system/ crates/nu-table/ crates/nu-term-grid/
crates/nu-test-support/ crates/nu-utils/ crates/nu_plugin_custom_values/
crates/nu_plugin_example/ crates/nu_plugin_formats/ crates/nu_plugin_gstat/
crates/nu_plugin_inc/ crates/nu_plugin_python/ crates/nu_plugin_query/
```
And another for when there are files and directories present:
```
/home/rdevenney/projects/open_source/nushell/crates/nu-cli/src| nvim 02/16/2023 08:22:16 AM
commands.rs completions/ config_files.rs eval_file.rs
lib.rs menus/ nu_highlight.rs print.rs
prompt.rs prompt_update.rs reedline_config.rs repl.rs
syntax_highlight.rs util.rs validation.rs
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
[*] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
[*] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
[*] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
See title.
Also changed some misleading wording in `reject`'s help.
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Previously `nix run nixpkgs#hello` was lexed as `Item, Item, Item,
Comment`, however, `#hello` is *not* supposed to be a comment here and
should be parsed as part of the third `Item`.
This change introduces this behavior by not interrupting the parse of
the current token upon seeing a `#`.
Thank you so much for considering this, I think many `nix` users will be
grateful for this change and I think this will lead to more adaptation
in the ecosystem.
- closes#8137 and #6335
# User-Facing Changes
- code like `somecode# bla` and `somecode#bla` will not be parsed as
`somecode, comment` but as `somecode#bla`, hence this is a breaking
change for all users who didn't put a space before a comment introducing
token (`#`)
# Tests + Formatting
I've added tests that cover this behavior in `test_lex.rs`
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
> If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
I think this is expected behavior in most other shells, so the
documentation was lacking for not documenting the unexpected behavior
before and hence now is automatically more complete >D
# Description
Hi, I would like to add a couple of things to the `.gitignore` that
would probably not be preferred to be checked out.
Thanks in advance! :)
# User-Facing Changes
- none
# Tests + Formatting
- not affected
# After Submitting
- not affected
# Description
Final rework for https://github.com/nushell/nushell/issues/2741, after
this one, we'll add for free HTTP PUT, PATCH, DELETE and HEAD.
# User-Facing Changes
We can now post data using HTTP GET. I add some examples in the output
of `http get --help` to demonstrate this new behavior.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
closes#8153
This PR allows different types of lists, like `list<string>` and
`list<any>` to be appended with the `++=` operator.
## Before
```
mut args = [ hello ("hello" | path join world)]
$args ++= [ foo bar ]
Error: nu::parser::type_mismatch (link)
× Type mismatch during operation.
╭─[entry #2:1:1]
1 │ $args ++= [ foo bar ]
· ─────┬─────
· ╰── expected list<any>, found list<string>
╰────
```
## After
```
mut args = [ hello ("hello" | path join world)]
$args ++= [ foo bar ]
$args
╭───┬─────────────╮
│ 0 │ hello │
│ 1 │ hello\world │
│ 2 │ foo │
│ 3 │ bar │
╰───┴─────────────╯
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug where a default list in a custom command parameter
wasn't being accepted. The reason was because it was comparing specific
types of list like `list<any>` != `list<string>`. So, this PR attempts
to fix that.
### Before
```
> def f [param: list = [one]] { echo $param }
Error: nu::parser::assignment_mismatch (link)
× Default value wrong type
╭─[entry #1:1:1]
1 │ def f [param: list = [one]] { echo $param }
· ──┬──
· ╰── default value not list<any>
╰────
```
### After
```
> def f [param: list = [one]] {echo $param}
> f
╭───┬─────╮
│ 0 │ one │
╰───┴─────╯
```
closes#8092
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
When reading parser code to see how it works, I found that
`parse_expression` function contains some duplicate code about function
call, we can match several values at once to simplify code
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes the following message:
```
〉(ls).0 | into string
Error: nu:🐚:cant_convert (link)
× Can't convert to record.
╭─[entry #4:1:1]
1 │ (ls).0 | into string
· ─────┬─────
· ╰── can't convert string to record
╰────
help: try using the `to nuon` command
```
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
The crate manifest didn't include vital information to publish to
crates.io
This now includes the basic description and license information
Before landing:
- [x] `reedline 0.16.0` is out and pinned.
- [x] all fixes and features necessary are landed.
In the meantime:
- [ ] feed the release notes with relevant features and breaking changes
Related to #8119.
Should address the review comment by @sholderbach from #8119.
# Description
this PR adds the output to the new example for the `with-env` command
introduced by #8119.
```bash
with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
should output
```bash
["Y", "Z"]
```
hence the proposition from @sholderbach, i.e.
```rust
Some(Value::list(
vec![Value::test_string("Y"), Value::test_string("Z")],
Span::test_data(),
))
```
# User-Facing Changes
_none_
# Tests + Formatting
not really a test, only the output value for the last `with-env` example
- ✔️ `cargo fmt --all`
- ✔️ `cargo clippy --workspace -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect`
- ✔️ `cargo test --workspace`
# After Submitting
_none_
Bumps
[actions-rust-lang/setup-rust-toolchain](https://github.com/actions-rust-lang/setup-rust-toolchain)
from 1.3.7 to 1.4.2.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/blob/main/CHANGELOG.md">actions-rust-lang/setup-rust-toolchain's
changelog</a>.</em></p>
<blockquote>
<h2>[1.4.2] - 2023-02-15</h2>
<h3>Fixed</h3>
<ul>
<li>Tweak sparse registry version regex to better work with 1.68 nightly
versions.</li>
<li>Fix command not found issue</li>
</ul>
<h2>[1.4.1] - 2023-02-13</h2>
<h3>Fixed</h3>
<ul>
<li>
<p>Fixed running on macOS <a
href="https://github-redirect.dependabot.com/actions-rust-lang/setup-rust-toolchain/issues/9">#9</a>
<a
href="https://github-redirect.dependabot.com/actions-rust-lang/setup-rust-toolchain/issues/10">#10</a>
The macOS images have an ancient version of bash, but the action relies
on "newer" features than 2014.
We install bash via brew (already pre-installed) to have a new enough
version.</p>
<p>The CI is extended to also run on Windows and macOS to catch such
issues earlier in the future.</p>
<p>Thanks to <a
href="https://github.com/GeorgeHahn"><code>@GeorgeHahn</code></a> for
reporting the issue.</p>
</li>
</ul>
<h2>[1.4.0] - 2023-02-13</h2>
<h3>Changed</h3>
<ul>
<li>Only set environment variables, if they are not set before.
This allows setting environment variables before using this action and
keeping their values.</li>
<li>Enable stable sparse registry, except on versions 1.66 and 1.67
where this leads to errors.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="9fa7c33ef0"><code>9fa7c33</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/actions-rust-lang/setup-rust-toolchain/issues/11">#11</a>
from actions-rust-lang/tweak-regex</li>
<li><a
href="5f4f30a995"><code>5f4f30a</code></a>
Maybe fix rustup warning</li>
<li><a
href="2d7b97c05c"><code>2d7b97c</code></a>
Tweak sparse registry version regex and command not found</li>
<li><a
href="c7c759a5c9"><code>c7c759a</code></a>
New version with macOS fix</li>
<li><a
href="ba68a52e42"><code>ba68a52</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/actions-rust-lang/setup-rust-toolchain/issues/10">#10</a>
from actions-rust-lang/issue-9</li>
<li><a
href="40e33d4912"><code>40e33d4</code></a>
Install newer bash on macOS</li>
<li><a
href="8ba1b441e5"><code>8ba1b44</code></a>
Run CI on more platforms</li>
<li><a
href="51b4f8316a"><code>51b4f83</code></a>
Bump version to 1.4.0</li>
<li><a
href="4605df10a0"><code>4605df1</code></a>
Merge pull request <a
href="https://github-redirect.dependabot.com/actions-rust-lang/setup-rust-toolchain/issues/8">#8</a>
from actions-rust-lang/sparse-registry</li>
<li><a
href="eac5ebb2ae"><code>eac5ebb</code></a>
Fix: Use acceptable crate name (lowercase)</li>
<li>Additional commits viewable in <a
href="https://github.com/actions-rust-lang/setup-rust-toolchain/compare/v1.3.7...v1.4.2">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR updates the code coverage script to help it work better on
Windows. The main changes here are to give you some progress outputs and
to enable `cargo llvm-cov show-env | from toml` to work better since the
toml spec says these literal strings should be single quoted vs double
quoted.
Closed#8139
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
While debugging #8139 I noticed that there was some error information
coming from the toml crate that we were not displaying. This would've
helped me to understand what was going on. So, this PR shows more
verbose errors when toml fails to parse.
### Before
```
cargo llvm-cov show-env | from toml
Error: nu:🐚:cant_convert (link)
× Can't convert to structured toml data.
╭─[entry #1:1:1]
1 │ cargo llvm-cov show-env | from toml
· ──┬──
· ╰── can't convert string to structured toml data
╰────
```
### After
```
cargo llvm-cov show-env | from toml
Error: nu:🐚:cant_convert (link)
× Can't convert to structured toml data.
╭─[entry #1:1:1]
1 │ cargo llvm-cov show-env | from toml
· ──┬──
· ╰── can't convert string to structured toml data
╰────
help: TOML parse error at line 2, column 24
|
2 | LLVM_PROFILE_FILE="C:\CarTar\nushell-%p-%m.profraw"
| ^
invalid escape sequence
expected `b`, `f`, `n`, `r`, `t`, `u`, `U`, `\`, `"`
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Enhancement of new `fill` command (#7846) to handle content including
ANSI escape codes for formatting or multi-code-point Unicode grapheme
clusters.
In both of these cases, the content is (many) bytes longer than its
visible length, and `fill` was counting the extra bytes so not adding
enough fill characters.
# Description
This script:
```rust
# the teacher emoji `\u{1F9D1}\u{200D}\u{1F3EB}` is 3 code points, but only 1 print position wide.
echo "This output should be 3 print positions wide, with leading and trailing `+`"
$"\u{1F9D1}\u{200D}\u{1F3EB}" | fill -c "+" -w 3 -a "c"
echo "This output should be 3 print positions wide, with leading and trailing `+`"
$"(ansi green)a(ansi reset)" | fill -c "+" -w 3 -a c
echo ""
```
Was producing this output:
```rust
This output should be 3 print positions wide, with leading and trailing `+`
🧑🏫
This output should be 3 print positions wide, with leading and trailing `+`
a
```
After this PR, it produces this output:
```rust
This output should be 3 print positions wide, with leading and trailing `+`
+🧑🏫+
This output should be 3 print positions wide, with leading and trailing `+`
+a+
```
# User-Facing Changes
Users may have to undo fixes they may have introduced to work around the
former behavior. I have one such in my prompt string that I can now
revert.
# Tests + Formatting
Don't forget to add tests that cover your changes.
-- Done
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
`fill` command not documented in the book, and it still talks about `str
lpad/rpad`. I'll fix.
Note added dependency on a new library `print-positions`, which is an
iterator that yields a complete print position (cluster + Ansi sequence)
per call. Should this be vendored?
Bumps [sysinfo](https://github.com/GuillaumeGomez/sysinfo) from 0.27.7
to 0.28.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/GuillaumeGomez/sysinfo/blob/master/CHANGELOG.md">sysinfo's
changelog</a>.</em></p>
<blockquote>
<h1>0.28.0</h1>
<ul>
<li>Linux: Fix name and CPU usage for processes tasks.</li>
<li>unix: Keep all users, even "not real" accounts.</li>
<li>Windows: Use SID for Users ID.</li>
<li>Fix C API.</li>
<li>Disable default cdylib compilation.</li>
<li>Add <code>serde</code> feature to enable serialization.</li>
<li>Linux: Handle <code>Idle</code> state in
<code>ProcessStatus</code>.</li>
<li>Linux: Add brand and name of ARM CPUs.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/GuillaumeGomez/sysinfo/commits">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [winreg](https://github.com/gentoo90/winreg-rs) from 0.10.1 to
0.11.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/gentoo90/winreg-rs/blob/master/CHANGELOG.md">winreg's
changelog</a>.</em></p>
<blockquote>
<h2>0.11.0</h2>
<ul>
<li>Migrate to the 2018 edition of Rust</li>
<li>Move the code from <code>lib.rs</code> to separate files</li>
<li>Use <a
href="https://crates.io/crates/cfg-if"><code>cfg-if</code></a> instead
of <code>build.rs</code> to fail build on non-windows systems</li>
<li>Reimplement deserialization logic, implement [de]serialization for
byte arrays (<a
href="https://github-redirect.dependabot.com/gentoo90/winreg-rs/issues/49">#49</a>)</li>
<li>Fix some typos and <code>clippy</code> warnings</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="f34742d674"><code>f34742d</code></a>
Bump version to 0.11.0</li>
<li><a
href="75f2593f62"><code>75f2593</code></a>
Move the changelog to a separate file</li>
<li><a
href="1f6f877ed7"><code>1f6f877</code></a>
Fix some clippy warnings</li>
<li><a
href="7a32d642cd"><code>7a32d64</code></a>
Implement [de]serialization for byte arrays</li>
<li><a
href="8464557c2d"><code>8464557</code></a>
Reimplement deserialization logic</li>
<li><a
href="9e8dc28029"><code>9e8dc28</code></a>
Put serialization tests into a separate file</li>
<li><a
href="04f7d232c7"><code>04f7d23</code></a>
Use <code>cfg-if</code> to fail build on non-windows systems</li>
<li><a
href="c3ac5ba5ea"><code>c3ac5ba</code></a>
Move the code from <code>lib.rs</code> to separate files</li>
<li><a
href="17378a9ca4"><code>17378a9</code></a>
Migrate to the 2018 edition of Rust</li>
<li><a
href="f4d45923ab"><code>f4d4592</code></a>
Remove Appveyor. It's broken anyway</li>
<li>Additional commits viewable in <a
href="https://github.com/gentoo90/winreg-rs/compare/v0.10.1...v0.11.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This can be triggered manually and inspected for example with:
-
https://marketplace.visualstudio.com/items?itemName=ryanluker.vscode-coverage-gutters
- https://github.com/umaumax/vim-lcov
- https://github.com/andythigpen/nvim-coverage (probably with some
effort)
Currently I try to use the `--profile=ci` as well as the CI coverage
action relies on it but the flags passed to build and test differ.
First locally I don't run into the out of disk space problems of the CI
runners when also allowing the plugin tests to run. Furthermore I am not
fully sure what is going on with the recompilation between `cargo build`
and `cargo test`. Chose the most simple config, people might use for
running the test suite locally.
# User-Facing Changes
> Developers, Developers, Developers
Steve Ballmer
hello there 👋😋
when messing around with `with-env`, looking at the examples, i did not
understand that we could directly run `with-env` with a record as the
argument and not from the input of a pipe 😮
even though the last example, i.e.
```bash
Set by row(e.g. `open x.json` or `from json`)
> '{"X":"Y","W":"Z"}'|from json|with-env $in { [$env.X $env.W] }
```
, is equivalent, just the record comes from the pipe, i thought adding
that explicite new example could be helpful 😌
# Description
looking at the single real change of this PR, i.e. 86ef34e90, you can
see i've simply added
```bash
Set by key-value record
> with-env {X: "Y", W: "Z"} { [$env.X $env.W] }
```
just before the example above
> **Note**
> i've also added spaces around the '|' in the last examples, from
> ```bash
> > '{"X":"Y","W":"Z"}'|from json|with-env $in { [$env.X $env.W] }
> ```
> to
> ```bash
> > '{"X":"Y","W":"Z"}' | from json | with-env $in { [$env.X $env.W] }
> ```
> hopefully making the pipeline a bit easier to read 👍
### hope you like that 😏
# User-Facing Changes
a new example has been added to `with-env`
# Tests + Formatting
no tests have been added
# After Submitting
the change should not affect the website, i think
=> if i need to generate the associated `HTML` file on
https://github.com/nushell/nushell.github.io, please tell me 😋
# Description
Reverts the PR #7779 which breaks subcommand completions. The issues
#7648 and #7754 thus still need fixing.
This reverts commit 8acced5.
# User-Facing Changes
Enables subcommand completions.
Unfortunately, also brings back the completion panic if alias is shorter
than the command name.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Broken link
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title..
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
In order to work on https://github.com/nushell/nushell/issues/2741, I'm
preparing the code.
# User-Facing Changes
Both commands do support the timeout option.
**But the timeout argument `-t, --timeout` has been migrated to `-m,
--max-time`**. I had to make a choice since there is another option
using the short command `t` which is "content-type".
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
close#8033
So as I said they suppose to be there;
I've basically added a change of style if --collapse is used.
PS: I guess it's worth to add tests so hold on if you'll plan to merge
it.
---------
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
# Description
Fixes issue #7792 Fix basically by @kubouch , "stolen" by me :). Edit:
Added "proper" fix rather than the one liner
```
start Cargo.toml
// Opens in default editor
```
```
start https://www.google.com [alternative_browser]
// Opens page in default browser or another browser if specified
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- [X] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [X] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [X] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
I noticed a bug in the default_config.nu while debugging something else.
The colors in the dark_theme should be named colors and not rgb colors.
Rgb colors prevents the dark theme from working properly in terminals
that don't support 24-bit aka rgb colors.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This does two fixes for bare words:
* It changes completions for paths to wrap a path with backticks if it
starts with a number. This helps bare words that start with numbers be
separate from unit values
* It allows bare words wrapped with backticks to be the name of a
command. Backtick values in command positions are no longer treated as
strings
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR fixes a bug that occurs if you pass `rename --column` and empty
list like `ls | rename -c []`.
## Before
```
> ls | rename -c []
thread 'main' panicked at 'index out of bounds: the len is 0 but the index is 0', crates\nu-command\src\filters\rename.rs:110:15
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
## After
```
> ls | rename -c []
Error: nu:🐚:type_mismatch (link)
× Type mismatch.
╭─[entry #1:1:1]
1 │ ls | rename -c []
· ─┬
· ╰── The list cannot be empty and must contain only two values: the column's name and its replacement value
╰────
```
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR tweaks how `ast` works a tiny bit by outputting values in stead
of eprintln!'s. It also moves the `ast` command into the folder with the
rest of the debug commands and changes the category to debug.
I started adding some tests but couldn't figure out a good way to do it
since every `ast` command contains spans that will be different on each
invocation.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Now that we've landed the debug commands we were working on, let's
relocate them to an easier place to find all of them. That's what this
PR does.
The only actual code change was changing the `timeit` command to a
`Category::Debug` command. The rest is just moving things around and
hooking them up.
# User-Facing Changes
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, I found this feature is useful to me too :)
Closes: #8039
# User-Facing Changes
```
❯ 3 * "ab"
ababab
❯ 3 * [1 2 3]
╭───┬───╮
│ 0 │ 1 │
│ 1 │ 2 │
│ 2 │ 3 │
│ 3 │ 1 │
│ 4 │ 2 │
│ 5 │ 3 │
│ 6 │ 1 │
│ 7 │ 2 │
│ 8 │ 3 │
╰───┴───╯
```
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Added a few syntax errors in ints and strings, changed parser to stop
and show that error rather than continue trying to parse those tokens as
some other shape. However, I don't see how to push this direction much
further, and most of the classic confusing errors can't be changed.
Flagged as WIP for the moment, but passes all checks and works better
than current release:
1. I have yet to figure out how to make these errors refer back to the
book, as I see some other errors do.
2. How to give syntax error when malformed int is first token in line?
Currently parsed as external command, user gets confusing error message.
3. Would like to be more strict with *decimal* int literals (lacking,
e.g, `0x' prefix). Need to tinker more with the order of parse shape
calls, currently, float is tried after int, so '1.4' has to be passed.
_(Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.)_
```bash
〉"\z"
Error:
╭─[entry #3:1:1]
1 │ "\z"
· ─┬─
· ╰── Syntax error in string, unrecognized character after escape '\'.
╰────
```
Canonic presentation of a syntax error.
```bash
〉" \u{01ffbogus}"
Error:
× Invalid syntax
╭─[entry #2:1:1]
1 │ " \u{01ffbogus}"
· ───────┬──────
· ╰── Syntax error in string, expecting 1 to 6 hex digits in unicode escape '\u{X...}', max value 10FFFF.
╰────
```
Malformed unicode escape in string, flagged as error.
String parse can be opinionated, it's the last shape tried.
```bash
〉0x22bogus
Error: nu:🐚:external_command (link)
× External command failed
╭─[entry #4:1:1]
1 │ 0x22bogus
· ────┬────
· ╰── executable was not found
╰────
help: No such file or directory (os error 2)
```
A *correct* number in first token would be evaluated, but an *incorrect*
one is treated as external command? Confusing to users.
```bash
〉0 + 0x22bogus
Error:
× Invalid syntax
╭─[entry #5:1:1]
1 │ 0 + 0x22bogus
· ────┬────
· ╰── Syntax error in int, invalid digits in radix 16 int.
╰────
```
Can give syntax error if token is unambiguously int literal. e.g has 0b
or 0x prefix, could not be a float.
```bash
〉0 + 098bogus
Error: nu::parser::unsupported_operation (link)
× Types mismatched for operation.
╭─[entry #6:1:1]
1 │ 0 + 098bogus
· ┬ ┬ ────┬───
· │ │ ╰── string
· │ ╰── doesn't support these values.
· ╰── int
╰────
help: Change int or string to be the right types and try again.
```
But *decimal* literal (no prefix) can't be too strict. Parser is going
to try float later. So '1.4' must be passed.
# User-Facing Changes
First and foremost, more specific error messages for typos in string and
int literals. Probably improves interactive user experience.
But a script that was causing and then checking for specific error might
notice a different error message.
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Added (positive and negative unit tests in `cargo test -p nu-parser`.
Didn't add integration tests.
Make sure you've run and fixed any issues with these commands:
- [x] `cargo fmt --all -- --check` to check standard code formatting
(`cargo fmt --all` applies these changes)
- [x] `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- [x] `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
