# Description
I swear, I only did `cargo update -p reedline`. However, I feel down the
dependency rabbit hole. We need to get nushell on crossterm 28.1 and
ratatui on 28.1 but we can't because tabled uses papergrid which uses an
older version of unicode-width that can't be upgraded apparently. Ugh.
I've opened an issue at the tabled repo about this.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
After merging #13788, I get an error message which says that
`use_grid_icons` is invalid.
I think it's good to report the specific error, and guide user to delete
it.
# Description
The content-type was not being handled appropriately when sending
requests with a string value.
# User-Facing Changes
- Passing a string value through a pipeline with a content-type set as
metadata is handled correctly
- Passing a string value as a parameter with a content-type set as a
flag is handled correctly.
# Description
After looking at #13751 I noticed that the config setting
`use_grid_icons` seems out of place. So, I removed it from the config
and made it a parameter to the `grid` command.
# Description
This PR fixes#13732. However, I don't think it's a proper fix.
1. It doesn't really show what the problem is.
2. It kind of side-steps the error entirely.
I do think the change in span.rs may be valid because I don't think
span.end should ever be 0. In the example in 13732 the span end was
always 0 and so that made contains_span() return true, which seems like
a false positive.
The `checked_sub()` in ide.rs kind of just stops it from failing
outloud.
I'll leave it to smarter folks than me to land this if they think it's
worthy.
Discovered by @cptpiepmatz that #13749 broke the standalone check for
`nu-protocol`
Explicit use of the feature as workspace root also disables all features
for `serde`. Alternatively we could reconsider this there.
# Description
The existing code uses exact matches on content type. This can caused
things like "application/json; charset=utf-8" that contain a charset not
using send_json method.
NOTE: The charset portion in the above example would still be ignored as
we rely on serde and the client library to control the encoding, it is
still better to catch the json case.
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
In order to be more consistent with the nushell terminology and with
polars expression terminology `polars concatenate` is now `polars
str-join`. `polars str-join` can also be used as expression.
<img width="857" alt="Screenshot 2024-09-04 at 12 41 25"
src="https://github.com/user-attachments/assets/8cc5a0c2-194c-49ec-9fe1-65ec4825414d">
# User-Facing Changes
- `polars concatenate` is now `polars str-join`
- `polars str-join` can be used as an expression
# Description
Allows `polars str-lengths` to be used as an expression:
<img width="826" alt="Screenshot 2024-09-04 at 13 57 45"
src="https://github.com/user-attachments/assets/b74139e0-e8ba-4910-84c2-cf4be4a084b6">
# User-Facing Changes
- `polars str-lengths` can be used as an expression.
- char length is now the default. Use the --bytes flag to get bytes
length.
# Description
Cleans up and refactors the config code using the `IntoValue` macro.
Shoutout to @cptpiepmatz for making the macro!
# User-Facing Changes
Should be none.
# After Submitting
Somehow refactor the reverse transformation.
Closes#13687Closes#13686
# Description
Light refactoring of `send_request `in `client.rs`. In the end there are
more lines but now the logic is more concise and facilitates adding new
conditions in the future. Unit tests ran fine and I tested a few cases
manually.
Cool project btw, I'll be using nushell from now on.
# Description
This PR allows the helper attribute `nu_value(rename = "...")` to be
used on struct fields and enum variants. This allows renaming keys and
variants just like [`#[serde(rename =
"name")]`](https://serde.rs/field-attrs.html#rename). This has no
singular variants for `IntoValue` or `FromValue`, both need to use the
same (but I think this shouldn't be an issue for now).
# User-Facing Changes
Users of the derive macros `IntoValue` and `FromValue` may now use
`#[nu_value(rename = "...")]` to rename single fields, but no already
existing code will break.
Bumps [crate-ci/typos](https://github.com/crate-ci/typos) from 1.24.1 to
1.24.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/releases">crate-ci/typos's
releases</a>.</em></p>
<blockquote>
<h2>v1.24.4</h2>
<h2>[1.24.4] - 2024-09-03</h2>
<h3>Fixes</h3>
<ul>
<li>Offer a correction for <code>grather</code></li>
</ul>
<h2>v1.24.3</h2>
<h2>[1.24.3] - 2024-08-30</h2>
<h3>Fixes</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1069">August
2024</a> changes</li>
</ul>
<h2>v1.24.2</h2>
<h2>[1.24.2] - 2024-08-30</h2>
<h3>Performance</h3>
<ul>
<li>Cap unbounded parsing to avoid worst case performance (hit with test
data)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/crate-ci/typos/blob/master/CHANGELOG.md">crate-ci/typos's
changelog</a>.</em></p>
<blockquote>
<h2>[1.24.4] - 2024-09-03</h2>
<h3>Fixes</h3>
<ul>
<li>Offer a correction for <code>grather</code></li>
</ul>
<h2>[1.24.3] - 2024-08-30</h2>
<h3>Fixes</h3>
<ul>
<li>Updated the dictionary with the <a
href="https://redirect.github.com/crate-ci/typos/issues/1069">August
2024</a> changes</li>
</ul>
<h2>[1.24.2] - 2024-08-30</h2>
<h3>Performance</h3>
<ul>
<li>Cap unbounded parsing to avoid worst case performance (hit with test
data)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="853bbe8898"><code>853bbe8</code></a>
chore: Release</li>
<li><a
href="b5f56600b2"><code>b5f5660</code></a>
docs: Update changelog</li>
<li><a
href="39f678e520"><code>39f678e</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1093">#1093</a>
from kachick/grather-suggest-candidates</li>
<li><a
href="bb6905fdc9"><code>bb6905f</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1092">#1092</a>
from crate-ci/renovate/embarkstudios-cargo-deny-acti...</li>
<li><a
href="786c825f17"><code>786c825</code></a>
fix(dict): Add suggestions for the typo "grather"</li>
<li><a
href="340058181b"><code>3400581</code></a>
chore(deps): Update EmbarkStudios/cargo-deny-action action to v2</li>
<li><a
href="9ad6f5c054"><code>9ad6f5c</code></a>
chore: Release</li>
<li><a
href="12e101ec51"><code>12e101e</code></a>
docs: Update changelog</li>
<li><a
href="8c58591ec4"><code>8c58591</code></a>
Merge pull request <a
href="https://redirect.github.com/crate-ci/typos/issues/1091">#1091</a>
from epage/august</li>
<li><a
href="250dcc73e6"><code>250dcc7</code></a>
fix(dict): Aug updates</li>
<li>Additional commits viewable in <a
href="https://github.com/crate-ci/typos/compare/v1.24.1...v1.24.4">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Bumps [indexmap](https://github.com/indexmap-rs/indexmap) from 2.4.0 to
2.5.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/indexmap-rs/indexmap/blob/master/RELEASES.md">indexmap's
changelog</a>.</em></p>
<blockquote>
<h2>2.5.0</h2>
<ul>
<li>Added an <code>insert_before</code> method to <code>IndexMap</code>
and <code>IndexSet</code>, as an
alternative to <code>shift_insert</code> with different behavior on
existing entries.</li>
<li>Added <code>first_entry</code> and <code>last_entry</code> methods
to <code>IndexMap</code>.</li>
<li>Added <code>From</code> implementations between
<code>IndexedEntry</code> and <code>OccupiedEntry</code>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="48ed49017c"><code>48ed490</code></a>
Release 2.5.0</li>
<li><a
href="139d7addfb"><code>139d7ad</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/340">#340</a>
from cuviper/insert-bounds</li>
<li><a
href="1d9b5e3d03"><code>1d9b5e3</code></a>
Add doc examples for <code>insert_before</code> and
<code>shift_insert</code></li>
<li><a
href="8ca01b0df7"><code>8ca01b0</code></a>
Use <code>insert_before</code> for "new" entries in
<code>insert_sorted</code></li>
<li><a
href="7224def010"><code>7224def</code></a>
Add <code>insert_before</code> as an alternate to
<code>shift_insert</code></li>
<li><a
href="0247a1555d"><code>0247a15</code></a>
Document and assert index bounds in <code>shift_insert</code></li>
<li><a
href="922c6ad1af"><code>922c6ad</code></a>
Update the CI badge</li>
<li><a
href="e482e1768a"><code>e482e17</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/342">#342</a>
from cuviper/btree-like</li>
<li><a
href="b63e4a1556"><code>b63e4a1</code></a>
Merge pull request <a
href="https://redirect.github.com/indexmap-rs/indexmap/issues/341">#341</a>
from cuviper/from-entry</li>
<li><a
href="264e5b7304"><code>264e5b7</code></a>
Add doc aliases like <code>BTreeMap</code>/<code>BTreeSet</code></li>
<li>Additional commits viewable in <a
href="https://github.com/indexmap-rs/indexmap/compare/2.4.0...2.5.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This change allows one to see the version of their plugin file without
trying to register it.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
This pr addresses the comment:
https://github.com/nushell/nushell/issues/11791#issuecomment-2308384155
It's caused by if the last row have a very different format to the first
row, the value of `end_char` will exceed the `line_char_boundaries`.
Adding a guard for it should avoid such panic.
# User-Facing Changes
The following code should no longer panic:
```shell
"nu_plugin_highlight = '1.2.2+0.97.1' # A nushell plugin for syntax highlighting
trace_nu_plugin = '0.3.1' # A wrapper to trace Nu plugins
nu_plugin_bash_env = '0.13.0' # Nu plugin bash-env
nu_plugin_from_sse = '0.4.0' # Nushell plugin to convert a HTTP server sent event stream to structured data
... and 90 crates more (use --limit N to see more)" | detect columns -n --guess
```
# Tests + Formatting
Added 1 test.
# Description
This changes the behavior of `tee` to be more transparent when given a
value that isn't a list or range. Previously, anything that wasn't a
byte stream would converted to a list stream using the iterator
implementation, which led to some surprising results. Instead, now, if
the value is a string or binary, it will be treated the same way a byte
stream is, and the output of `tee` is a byte stream instead of the
original value. This is done so that we can synchronize with the other
thread on collect, and potentially capture any error produced by the
closure.
For values that can't be converted to streams, the closure is just run
with a clone of the value instead on another thread. Because we can't
wait for the other thread, there is no way to send an error back to the
original thread, so instead it's just written to stderr using
`report_error_new()`.
There are a couple of follow up edge cases I see where byte streams
aren't necessarily treated exactly the same way strings are, but this
should mostly be a good experience.
Fixes#13489.
# User-Facing Changes
Breaking change.
- `tee` now outputs and sends string/binary stream for string/binary
input.
- `tee` now outputs and sends the original value for any other input
other than lists/ranges.
# Tests + Formatting
Added for new behavior.
# After Submitting
- [ ] release notes: breaking change, command change
removing the `std` feature as well would drop some dependencies tied to
`rust_decimal` from the `Cargo.lock` but unclear to me what the actual
impact on compile times is.
We may want to consider dropping the `byte-unit` dependency altogether
as we have a significant fraction of our own logic to support the byte
units with 1024 and 1000 prefixes. Not sure which fraction is covered by
us or the dependency.
# Description
Implements `IntoValue` for `&str` and `DateTime` as well as other
nushell types like `Record` and `Closure`. Also allows `HashMap`s with
keys besides `String` to implement `IntoValue`.
# Description
This changes the serialization of custom values within the plugin
protocol to use MessagePack instead of bincode, removing the dependency
on bincode entirely.
Bincode does not seem to be very maintained anymore, and the externally
tagged enum representation doesn't seem to always work now even though
it should. Since we use MessagePack already anyway for the plugin
protocol, this seems like an obvious choice. This uses the unnamed
variant of the serialization rather than the named variant, which is
what the plugin protocol in general uses. The unnamed variant does not
include field names, which aren't really required here, so this should
give us something that's more or less as efficient as bincode is.
Should fix#13743.
# User-Facing Changes
- Will need to recompile plugins (but always do anyway)
- Doesn't technically break the plugin protocol (custom value data is a
black box / plugin implementation specific), but breaks compatibility
between `nu-plugin-engine` and `nu-plugin` so they do need to both be
updated to match.
# Tests + Formatting
All tests pass.
# After Submitting
- [ ] release notes
# Description
Remove the `#[cfg_attr(tarpaulin, ignore)]` code coverage attributes to
get rid warnings when compiling plugins with a more recent rust version
than nushell.
# Description
Adds the ability for `polars replace` and `polars replace-all` to work
as expressions.
# User-Facing Changes
- `polars replace` can be used with polars expressions
- `polars replace-all` can be used with polars expressions
# Description
`cargo` somewhat recently gained the capability to store `lints`
settings for the crate and workspace, that can override the defaults
from `rustc` and `clippy` lints. This means we can enforce some lints
without having to actively pass them to clippy via `cargo clippy -- -W
...`. So users just forking the repo have an easier time to follow
similar requirements like our CI.
## Limitation
An exception that remains is that those lints apply to both the primary
code base and the tests. Thus we can't include e.g. `unwrap_used`
without generating noise in the tests. Here the setup in the CI remains
the most helpful.
## Included lints
- Add `clippy::unchecked_duration_subtraction` (added by #12549)
# User-Facing Changes
Running `cargo clippy --workspace` should be closer to the CI. This has
benefits for editor configured runs of clippy and saves you from having
to use `toolkit` to be close to CI in more cases.
this PR should close#12168
# Description
Add `split cell-path`, inverse of `into cell-path`.
# User-Facing Changes
Currently there is no way to make use of cell-path values as a user,
other than passing them to builtin commands. This PR makes more use
cases possible.
This PR is an attempt to fix#8257 and fix#10985 (which is
duplicate-ish)
# Description
The parser currently doesn't know how to deal with colons appearing
while lexing whitespace-terminated tokens specifying a record value.
Most notably, this means you can't use datetime literals in record value
position (and as a consequence, `| to nuon | from nuon` roundtrips can
fail), but it also means that bare words containing colons cause a
non-useful error message.
`parser::parse_record` calls `lex::lex` with the `:` colon character in
the `special_tokens` argument. This allows colons to terminate record
keys, but as a side effect, it also causes colons to terminate record
*values*. I added a new function `lex::lex_n_tokens`, which allows the
caller to drive the lexing process more explicitly, and used it in
`parser::parse_record` to let colons terminate record keys while not
giving them special treatment when appearing in record values.
This PR description previously said: *Another approach suggested in one
of the issues was to support an additional datetime literal format that
doesn't require colons. I like that that wouldn't require new
`lex::lex_internal` behaviour, but an advantage of my approach is that
it also newly allows for string record values given as bare words
containing colons. I think this eliminates another possible source of
confusion.* It was determined that this is undesirable, and in the
current state of this PR, bare word record values with colons are
rejected explicitly. The better error message is still a win.
# User-Facing Changes
In addition to the above, this PR also disables the use of "special"
(non-item) tokens in record key and value position, and the use of a
single bare `:` as a record key.
Examples of behaviour *before* this PR:
```nu
{ a: b } # Valid, same as { 'a': 'b' }
{ a: b:c } # Error: expected ':'
{ a: 2024-08-13T22:11:09 } # Error: expected ':'
{ :: 1 } # Valid, same as { ':': 1 }
{ ;: 1 } # Valid, same as { ';': 1 }
{ a: || } # Valid, same as { 'a': '||' }
```
Examples of behaviour *after* this PR:
```nu
{ a: b } # (Unchanged) Valid, same as { 'a': 'b' }
{ a: b:c } # Error: colon in bare word specifying record value
{ a: 2024-08-13T22:11:09 } # Valid, same as { a: (2024-08-13T22:11:09) }
{ :: 1 } # Error: colon in bare word specifying record key
{ ;: 1 } # Error: expected item in record key position
{ a: || } # Error: expected item in record value position
```
# Tests + Formatting
I added tests, but I'm not sure if they're sufficient and in the right
place.
# After Submitting
I don't think documentation changes are needed for this, but please let
me know if you disagree.
# Description
This feature tried to connect reedline with the system clipboard for
three special bindings.
To do so it uses the `arboard` crate with heavy dependencies for the
system X or Wayland server or the Windows APIs. We had issues in the
headless CI with it and builds with musl seem to stall.
Removing it from the default build should negatively impact only a small
subset of users aware of the extra bindings. You can still use the
internal clipboard for binding based selection and the terminals extra
bindings to copy arbitrary content into the system clipboard.
For all other users it removes potential sources of failure and a whole
1 MB of release mode binary size (> 2% reduction). Furthermore a
potentially substantial attack surface for Nushell is gone for default
builds.
- Should resolve#13019
- Work in the spirit of #13603
# User-Facing Changes
The `edit` entries
`copyselectionsystem`/`copyselectionsystem`/`pastesystem` for
keybindings are gone in the default build
If you strictly depend on this behavior, you can still build with the
addition of `--features system-clipboard`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
@sholderbach mentioned that I introduced `convert_case` as a dependency
while we already had `heck` for case conversion. So in this PR replaced
the use `convert_case` with `heck`. Mostly I rebuilt the `convert_case`
API with `heck` to work with it as I like the API of `convert_case` more
than `heck`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Nothing changed, the use of `convert_case` wasn't exposed anywhere and
all case conversions are still available.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
No new tests required but my tests in `test_derive` captured some errors
I made while developing this change, (hurray, tests work 🎉)
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Closes#13677
Remove the command `str deunicode`, as it has a narrow application, is
loosely defined by the data provided by the `deunicode` crate and thus a
stabilization liability post-1.0.
Furthermore the data to perform the look-up is quite substantial.
Removing the command and the `deunicode` dependency saves 0.9 MB of
binary data in release mode (~ 2% of total)
(checked via `cargo bloat --release` for a linux x86 build)
# User-Facing Changes
The `str deunicode` command recently added in #13270 is gone
The two additional boxes for "additional context" and screenshots may be
somewhat redundant to the primary `Steps to reproduce`. Sadly folks are
already a bit lazy with the core task of providing a succinct
reproducing example. Having additional fields may not actually improve
the quality and lead to waffling or if left empty some deadspace to
scroll past.
Fixesnushell/nushell#13689
# Description
Respect user-defined `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT`
Additionally I fixed `nu_with_std!()` macro (it was not working
correctly)
# User-Facing Changes
Users now may set `$env.NU_LOG_FORMAT` and `$env.NU_LOG_DATE_FORMAT` in
`env.nu` and it will work even if `use std` is used after that.
# Tests + Formatting
Added a couple of tests for the new functionality.
# After Submitting
# Description
With Windows Terminal Canary 1.23.240826001-llm, this enables nushell to
query the terminal and receive a response.
The red component here is
```nushell
❯ ("0c0c" | into int -r 16) / 256 | math round | fmt | get lowerhex
0xc
```
This example queries the background and the response is a r/g/b color.
The response really should be
```
␛]11;1;rgb:0c0c/0c0c/0c0c
```
I'm not sure why nushell's input is eating the first part.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Using derived `IntoValue` and `FromValue` implementations on structs
with named fields currently produce `Value::Record`s where each key is
the key of the Rust struct. For records like the `$nu` constant, that
won't work as this record uses `kebab-case` for it's keys. To accomodate
this, I upgraded the `#[nu_value(rename_all = "...")]` helper attribute
to also work on structs with named fields which will rename the keys via
the same case conversion as the enums already have.
# User-Facing Changes
Users of these macros may choose different key styles for their in
`Value` representation.
# Tests + Formatting
I added the same test suite as enums already have and updated the traits
documentation with more examples that also pass the doc test.
# After Submitting
I played around with the `$nu` constant but got stuck at the point that
these keys are kebab-cased, with this, I can play around more with it.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This issue was reported by kira in
[Discord](https://discord.com/channels/601130461678272522/1276981416307069019).
In https://github.com/nushell/nushell/pull/13311, I accidentally made it
so that custom completions are filtered according to the user's
configured completion options (`$env.config.completions`) rather than
the completion options provided as part of the custom completions. This
PR is a quick fix for that.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
It should once again be possible to override match algorithm, case
sensitivity, and substring matching (`positional`) in custom
completions.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Added a couple tests.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
fdncred and I discussed this in Discord a bit and we thought it might be
better to not allow custom completions to override the user's config.
However, `positional` can't currently be set inside one's config, so you
can only do strict prefix matching, no substring matching. Another PR
could do one of the following:
- Document the fact that you can provide completion options inside
custom completions
- Remove the ability to provide completion options with custom
completions and add a `$env.config.completions.positional: true` option
- Remove the ability to provide completion options with custom
completions and add a new match algorithm `substring` (this is the one I
like most, since `positional` only applies to prefix matching anyway)
Separately from these options, we could also allow completers to specify
that they don't Nushell to do any filtering and sorting on the provided
custom completions.
Mistakes have been made. I forgot about a bunch of `todo`s in the helper
functions. So, this PR replaces them with proper errors. It also adds
tests for parse-time evaluation, because one `todo` I missed was in a
`run_const` function.
Hi there
Here I am using latest tabled.
My tests shows it does fixes panics, but I am wanna be sure.
@fdncred could you verify that it does fixes those panics/errors?
Closes#13405Closes#12786
