# Description
This does two fixes for bare words:
* It changes completions for paths to wrap a path with backticks if it
starts with a number. This helps bare words that start with numbers be
separate from unit values
* It allows bare words wrapped with backticks to be the name of a
command. Backtick values in command positions are no longer treated as
strings
# User-Facing Changes
_(List of all changes that impact the user experience here. This helps
us keep track of breaking changes.)_
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
This PR renames the `benchmark` command to the `time` command.
# User-Facing Changes
new command name
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Lint: `clippy::uninlined_format_args`
More readable in most situations.
(May be slightly confusing for modifier format strings
https://doc.rust-lang.org/std/fmt/index.html#formatting-parameters)
Alternative to #7865
# User-Facing Changes
None intended
# Tests + Formatting
(Ran `cargo +stable clippy --fix --workspace -- -A clippy::all -D
clippy::uninlined_format_args` to achieve this. Depends on Rust `1.67`)
I tackled some of the disabled `FIXME`/`#[ignore]` tests. Most were
straightforward to re-enable, and a few of them did not deserve to be
re-enabled.
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Closes#7554
# User-Facing Changes
See above.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Co-authored-by: Reilly Wood <26268125+rgwood@users.noreply.github.com>
# Description
Purely for consistency, various remaining instances of `$nothing`
(almost all of which were in test code) have been changed to `null`.
Now, the only place that refers to `$nothing` is the parser code which
implements it.
# User-Facing Changes
The default config.nu now uses `null` in certain places where it used
`$nothing`.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
Reverts nushell/nushell#7448
Some surprising behavior in how we do this. For example:
```
〉if (true || false) { print "yes!" } else { print "no!" }
no!
〉if (true or false) { print "yes!" } else { print "no!" }
yes!
```
This means for folks who are using the old `||`, they possibly get the
wrong answer once they upgrade. I don't think we can ship with that as
it will catch too many people by surprise and just make it easier to
write buggy code.
# Description
We got some feedback from folks used to other shells that `try/catch`
isn't quite as convenient as things like `||`. This PR adds `&&` as a
synonym for `;` and `||` as equivalent to what `try/catch` would do.
# User-Facing Changes
Adds `&&` and `||` pipeline operators.
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
Fixes https://github.com/nushell/nushell/issues/6708
The error message of environment variable not found could change
depending on the `$env` content which can produce random failures on
different systems. This PR hopefully makes the tests more resilient.
# User-Facing Changes
None
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used -A
clippy::needless_collect` to check that you're using the standard code
style
- `cargo test --workspace` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
# Description
As title, when execute external sub command, auto-trimming end
new-lines, like how fish shell does.
And if the command is executed directly like: `cat tmp`, the result
won't change.
Fixes: #6816Fixes: #3980
Note that although nushell works correctly by directly replace output of
external command to variable(or other places like string interpolation),
it's not friendly to user, and users almost want to use `str trim` to
trim trailing newline, I think that's why fish shell do this
automatically.
If the pr is ok, as a result, no more `str trim -r` is required when
user is writing scripts which using external commands.
# User-Facing Changes
Before:
<img width="523" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468810-86b04dbb-c147-459a-96a5-e0095eeaab3d.png">
After:
<img width="505" alt="img"
src="https://user-images.githubusercontent.com/22256154/202468599-7b537488-3d6b-458e-9d75-d85780826db0.png">
# Tests + Formatting
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace --features=extra -- -D warnings -D
clippy::unwrap_used -A clippy::needless_collect` to check that you're
using the standard code style
- `cargo test --workspace --features=extra` to check that all tests pass
# After Submitting
If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
* Copy lev_distance.rs from the rust compiler
* Minor changes to code from rust compiler
* "Did you mean" suggestions: test instrumented to generate markdown report
* Did you mean suggestions: delete test instrumentation
* Fix tests
* Fix test
`foo` has a genuine match: `for`
* Improve tests
* Initialize join.rs as a copy of collect.rs
* Evolve StrCollect into StrJoin
* Replace 'str collect' with 'str join' everywhere
git ls-files | lines | par-each { |it| sed -i 's,str collect,str join,g' $it }
* Deprecate 'str collect'
* Revert "Deprecate 'str collect'"
This reverts commit 959d14203e.
* Change `str collect` help message to say that it is deprecated
We cannot remove `str collect` currently (i.e. via
`nu_protocol::ShellError::DeprecatedCommand` since a prominent project
uses the API:
b85542c31c/src/virtualenv/activation/nushell/activate.nu (L43)
Rename `all?`, `any?` and `empty?` to `all`, `any` and `is-empty` for sake of simplicity and consistency.
- More understandable for newcomers, that these commands are no special to others.
- `?` syntax did not really aprove readability. For me it made it worse.
- We can reserve `?` syntax for any other nushell feature.
* Add hide-env to hide env vars; Cleanup tests
Also, there were some old unalias tests that I converted to hide.
* Add missing file
* Re-enable hide for env vars
* Fix test
* Rename did you mean error back
It was causing random tests to break
* introduce external command runs to failed error, and implement semicolon relative logic
* ignore test due to semicolon works
* not raise ShellError for external commands
* update comment
* add relative test in for windows
* fix type-o
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
* fix argument type
* while run external, convert list argument to str
* fix argument converting logic
* using parse_list_expression instead of parse_full_cell_path
* make parsing logic more explicit
* revert changes
* add tests
* Fix failing unit tests on Windows (#5142)
Fix let_env_expressions failing on Windows:
The env expression uses PATH, but on windows Path is used.
Fix correctly_escape_external_arguments, execute_binary_in_string
failing on Windows:
Using cococo now to make sure testresults are platform independent
* Update macros.rs
Co-authored-by: JT <547158+jntrnr@users.noreply.github.com>
* Add test for passing binary data through externals
This change adds an ignored test to confirm that binary data is passed
correctly between externals to be enabled in a later commit along with
the fix.
To assist in platform agnostic testing of binary data a couple of
additional testbins were added to allow testing on `Value::Binary` inside
`ExternalStream`.
* Support binary data to stdin of run-external
Prior to this change, any pipeline producing binary data (not detected
as string) then feed into an external would be ignored due to
run-external only supporting `Value::String` on stdin.
This change adds binary stdin support for externals allowing something
like this for example:
〉^cat /dev/urandom | ^head -c 1MiB | ^pv -b | ignore
1.00MiB
This would previously output `0.00 B [0.00 B/s]` due to the data not
being pushed to stdin at each stage.
* fix#4140
We are passing commands into a shell underneath but we were not
escaping arguments correctly. This new version of the code also takes
into consideration the ";" and "&" characters, which have special
meaning in shells.
We would probably benefit from a more robust way to join arguments to
shell programs. Python's stdlib has shlex.join, and perhaps we can
take that implementation as a reference.
* clean up escaping of posix shell args
I believe the right place to do escaping of arguments was in the
spawn_sh_command function. Note that this change prevents things like:
^echo "$(ls)"
from executing the ls command. Instead, this will just print
$(ls)
The regex has been taken from the python stdlib implementation of shlex.quote
* fix non-literal parameters and single quotes
* address clippy's comments
* fixup! address clippy's comments
* test that subshell commands are sanitized properly
```
> [
[ msg, labels, span];
["The message", "Helpful message here", ([[start, end]; [0, 141]])]
] | error make
error: The message
┌─ shell:1:1
│
1 │ ╭ [
2 │ │ [ msg, labels, span];
3 │ │ ["The message", "Helpful message here", ([[start, end]; [0, 141]])]
│ ╰─────────────────────────────────────────────────────────────────────^ Helpful message here
```
Adding a more flexible approach for creating error values. One use case, for instance is the
idea of a test framework. A failed assertion instead of printing to the screen it could create
tables with more details of the failed assertion and pass it to this command for making a full
fledge error that Nu can show. This can (and should) be extended for capturing error values as well
in the pipeline. One could also use it for inspection.
For example: `.... | error inspect { # inspection here }`
or "error handling" as well, like so: `.... | error capture { fix here }`
However, we start here only with `error make` that creates an error value for you with limited support for the time being.
* Allow different names for ...rest
* Resolves#3945
* This change requires an explicit name for the rest argument in `WholeStreamCommand`,
which is why there are so many changed files.
* Remove redundant clone
* Add tests
* Allow environment variables to be hidden
This change allows environment variables in Nushell to have a value of
`Nothing`, which can be set by the user by passing `$nothing` to
`let-env` and friends.
Environment variables with a value of Nothing behave as if they are not
set at all. This allows a user to shadow the value of an environment
variable in a parent scope, effectively removing it from their current
scope. This was not possible before, because a scope can not affect its
parent scopes.
This is a workaround for issues like #3920.
Additionally, this allows a user to simultaneously set, change and
remove multiple environment variables via `load-env`. Any environment
variables set to $nothing will be hidden and thus act as if they are
removed. This simplifies working with virtual environments, which rely
on setting multiple environment variables, including PATH, to specific
values, and remove/change them on deactivation.
One surprising behavior is that an environment variable set to $nothing
will act as if it is not set when querying it (via $nu.env.X), but it is
still possible to remove it entirely via `unlet-env`. If the same
environment variable is present in the parent scope, the value in the
parent scope will be visible to the user. This might be surprising
behavior to users who are not familiar with the implementation details.
An additional corner case is the the shorthand form of `with-env` does
not work with this feature. Using `X=$nothing` will set $nu.env.X to the
string "$nothing". The long-form works as expected: `with-env [X
$nothing] {...}`.
* Remove unused import
* Allow all primitives to be convert to strings
