It turns out that my previous PR,
https://github.com/nushell/nushell/pull/11999, didn't properly
canonicalize `$nu.default-config-dir` in a scenario where
`XDG_CONFIG_HOME` (or the equivalent on each platform) was a symlink. To
remedy that, this PR makes `nu_path::config_dir()` return a
canonicalized path. This probably shouldn't break anything (except maybe
tests relying on the old behavior), since the canonical path will be
equivalent to non-canonical paths.
# User-Facing Changes
A user may get a path with symlinks resolved and `..`s replaced where
they previously didn't. I'm not sure where this would happen, though,
and anyway, the canonical path is probably the "correct" thing to
present to the user. We're using `omnipath` to make the path presentable
to the user on Windows, so there's no danger of someone getting an path
with `\\?` there.
# Tests + Formatting
The tests for config files have been updated to run the binary using the
`Director` so that it has access to the `XDG_CONFIG_HOME`/`HOME`
environment variables to be able to change the config directory.
# Description
This PR uses the new plugin protocol to intelligently keep plugin
processes running in the background for further plugin calls.
Running plugins can be seen by running the new `plugin list` command,
and stopped by running the new `plugin stop` command.
This is an enhancement for the performance of plugins, as starting new
plugin processes has overhead, especially for plugins in languages that
take a significant amount of time on startup. It also enables plugins
that have persistent state between commands, making the migration of
features like dataframes and `stor` to plugins possible.
Plugins are automatically stopped by the new plugin garbage collector,
configurable with `$env.config.plugin_gc`:
```nushell
$env.config.plugin_gc = {
# Configuration for plugin garbage collection
default: {
enabled: true # true to enable stopping of inactive plugins
stop_after: 10sec # how long to wait after a plugin is inactive to stop it
}
plugins: {
# alternate configuration for specific plugins, by name, for example:
#
# gstat: {
# enabled: false
# }
}
}
```
If garbage collection is enabled, plugins will be stopped after
`stop_after` passes after they were last active. Plugins are counted as
inactive if they have no running plugin calls. Reading the stream from
the response of a plugin call is still considered to be activity, but if
a plugin holds on to a stream but the call ends without an active
streaming response, it is not counted as active even if it is reading
it. Plugins can explicitly disable the GC as appropriate with
`engine.set_gc_disabled(true)`.
The `version` command now lists plugin names rather than plugin
commands. The list of plugin commands is accessible via `plugin list`.
Recommend doing this together with #12029, because it will likely force
plugin developers to do the right thing with mutability and lead to less
unexpected behavior when running plugins nested / in parallel.
# User-Facing Changes
- new command: `plugin list`
- new command: `plugin stop`
- changed command: `version` (now lists plugin names, rather than
commands)
- new config: `$env.config.plugin_gc`
- Plugins will keep running and be reused, at least for the configured
GC period
- Plugins that used mutable state in weird ways like `inc` did might
misbehave until fixed
- Plugins can disable GC if they need to
- Had to change plugin signature to accept `&EngineInterface` so that
the GC disable feature works. #12029 does this anyway, and I'm expecting
(resolvable) conflicts with that
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Because there is some specific OS behavior required for plugins to not
respond to Ctrl-C directly, I've developed against and tested on both
Linux and Windows to ensure that works properly.
# After Submitting
I think this probably needs to be in the book somewhere
# Description
This allows plugins to make calls back to the engine to get config,
evaluate closures, and do other things that must be done within the
engine process.
Engine calls can both produce and consume streams as necessary. Closures
passed to plugins can both accept stream input and produce stream output
sent back to the plugin.
Engine calls referring to a plugin call's context can be processed as
long either the response hasn't been received, or the response created
streams that haven't ended yet.
This is a breaking API change for plugins. There are some pretty major
changes to the interface that plugins must implement, including:
1. Plugins now run with `&self` and must be `Sync`. Executing multiple
plugin calls in parallel is supported, and there's a chance that a
closure passed to a plugin could invoke the same plugin. Supporting
state across plugin invocations is left up to the plugin author to do in
whichever way they feel best, but the plugin object itself is still
shared. Even though the engine doesn't run multiple plugin calls through
the same process yet, I still considered it important to break the API
in this way at this stage. We might want to consider an optional
threadpool feature for performance.
2. Plugins take a reference to `EngineInterface`, which can be cloned.
This interface allows plugins to make calls back to the engine,
including for getting config and running closures.
3. Plugins no longer take the `config` parameter. This can be accessed
from the interface via the `.get_plugin_config()` engine call.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Not only does this have plugin protocol changes, it will require plugins
to make some code changes before they will work again. But on the plus
side, the engine call feature is extensible, and we can add more things
to it as needed.
Plugin maintainers will have to change the trait signature at the very
least. If they were using `config`, they will have to call
`engine.get_plugin_config()` instead.
If they were using the mutable reference to the plugin, they will have
to come up with some strategy to work around it (for example, for `Inc`
I just cloned it). This shouldn't be such a big deal at the moment as
it's not like plugins have ever run as daemons with persistent state in
the past, and they don't in this PR either. But I thought it was
important to make the change before we support plugins as daemons, as an
exclusive mutable reference is not compatible with parallel plugin
calls.
I suggest this gets merged sometime *after* the current pending release,
so that we have some time to adjust to the previous plugin protocol
changes that don't require code changes before making ones that do.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
I will document the additional protocol features (`EngineCall`,
`EngineCallResponse`), and constraints on plugin call processing if
engine calls are used - basically, to be aware that an engine call could
result in a nested plugin call, so the plugin should be able to handle
that.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR refactors `nu-check` and makes it possible to check module
directories. Also removes the requirement for files to end with .nu: It
was too limiting for module directories and there are executable scripts
[around](https://github.com/nushell/nu_scripts/tree/main/make_release/release-note)
that do not end with .nu, it's a common practice for scripts to omit it.
Other changes are:
* Removed the `--all` flag and heuristic parse because these are
irrelevant now when module syntax is a subset of script syntax (i.e.,
every module can be parsed as script).
* Reduced code duplication and in general tidied up the code
* Replaced unspanned errors with spanned ones.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
* `nu-check` doesn't require files to end with .nu
* can check module directories
* Removed `--all` flag
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
This is another attempt on #11288
This allows for a `Stack` to have a parent stack (behind an `Arc`). This
is being added to avoid constant stack copying in REPL code.
Concretely the following changes are included here:
- `Stack` can now have a `parent_stack`, pointing to another stack
- variable lookups can fallback to this parent stack (env vars and
everything else is still copied)
- REPL code has been reworked so that we use parenting rather than
cloning. A REPL-code-specific trait helps to ensure that we do not
accidentally trigger a full clone of the main stack
- A property test has been added to make sure that parenting "looks the
same" as cloning for consumers of `Stack` objects
---------
Co-authored-by: Raphael Gaschignard <rtpg@rokkenjima.local>
Co-authored-by: Ian Manske <ian.manske@pm.me>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
It looks like `Playground` and `Director` in nu-tests-support haven't
gotten much love recently, so this PR is for updating them to work with
newer Nushell versions.
- `Director` adds a `--skip-plugins` argument before running `nu`, but
that doesn't exist anymore, so I removed it.
- `Director` also adds a `--perf` argument, which also doesn't exist
anymore. I added `--log-level info` instead to get the performance
output.
- It doesn't seem like anyone was using `playground::matchers`, and it
used the [hamcrest2](https://github.com/Valloric/hamcrest2-rust) crate,
which appears to be unmaintained, so I got rid of that (and the
`hamcrest2` dependency).
- Inside `tests/fixtures/playground/config` were two files in the old
config format: `default.toml` and `startup.toml`. I removed those too.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
None, these changes only mess with tests.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes: #12054
It's cause by nu always add `/*` if there is a parameter in ls, then `ls
""` becomes `ls "/*"`. This pr tries to fix it by only append `/`
character if pattern is not empty.
# User-Facing Changes
NaN
# Tests + Formatting
Done
# After Submitting
NaN
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
I noticed that ctrl+C handling wasn't fully wired up in `into sqlite`,
for some data types we were ignoring ctrl+C presses.
I fixed that up and also made sure we roll back the current transaction
when cancelling (without that, I think we leak memory and database
locks).
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds a new evaluator path with callbacks to a mutable trait
object implementing a Debugger trait. The trait object can do anything,
e.g., profiling, code coverage, step debugging. Currently,
entering/leaving a block and a pipeline element is marked with
callbacks, but more callbacks can be added as necessary. Not all
callbacks need to be used by all debuggers; unused ones are simply empty
calls. A simple profiler is implemented as a proof of concept.
The debugging support is implementing by making `eval_xxx()` functions
generic depending on whether we're debugging or not. This has zero
computational overhead, but makes the binary slightly larger (see
benchmarks below). `eval_xxx()` variants called from commands (like
`eval_block_with_early_return()` in `each`) are chosen with a dynamic
dispatch for two reasons: to not grow the binary size due to duplicating
the code of many commands, and for the fact that it isn't possible
because it would make Command trait objects object-unsafe.
In the future, I hope it will be possible to allow plugin callbacks such
that users would be able to implement their profiler plugins instead of
having to recompile Nushell.
[DAP](https://microsoft.github.io/debug-adapter-protocol/) would also be
interesting to explore.
Try `help debug profile`.
## Screenshots
Basic output:
To profile with more granularity, increase the profiler depth (you'll
see that repeated `is-windows` calls take a large chunk of total time,
making it a good candidate for optimizing):
## Benchmarks
### Binary size
Binary size increase vs. main: **+40360 bytes**. _(Both built with
`--release --features=extra,dataframe`.)_
### Time
```nushell
# bench_debug.nu
use std bench
let test = {
1..100
| each {
ls | each {|row| $row.name | str length }
}
| flatten
| math avg
}
print 'debug:'
let res2 = bench { debug profile $test } --pretty
print $res2
```
```nushell
# bench_nodebug.nu
use std bench
let test = {
1..100
| each {
ls | each {|row| $row.name | str length }
}
| flatten
| math avg
}
print 'no debug:'
let res1 = bench { do $test } --pretty
print $res1
```
`cargo run --release -- bench_debug.nu` is consistently 1--2 ms slower
than `cargo run --release -- bench_nodebug.nu` due to the collection
overhead + gathering the report. This is expected. When gathering more
stuff, the overhead is obviously higher.
`cargo run --release -- bench_nodebug.nu` vs. `nu bench_nodebug.nu` I
didn't measure any difference. Both benchmarks report times between 97
and 103 ms randomly, without one being consistently higher than the
other. This suggests that at least in this particular case, when not
running any debugger, there is no runtime overhead.
## API changes
This PR adds a generic parameter to all `eval_xxx` functions that forces
you to specify whether you use the debugger. You can resolve it in two
ways:
* Use a provided helper that will figure it out for you. If you wanted
to use `eval_block(&engine_state, ...)`, call `let eval_block =
get_eval_block(&engine_state); eval_block(&engine_state, ...)`
* If you know you're in an evaluation path that doesn't need debugger
support, call `eval_block::<WithoutDebug>(&engine_state, ...)` (this is
the case of hooks, for example).
I tried to add more explanation in the docstring of `debugger_trait.rs`.
## TODO
- [x] Better profiler output to reduce spam of iterative commands like
`each`
- [x] Resolve `TODO: DEBUG` comments
- [x] Resolve unwraps
- [x] Add doc comments
- [x] Add usage and extra usage for `debug profile`, explaining all
columns
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Hopefully none.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Previously, the plugin itself would also print error messages about
mismatched versions, and there could be many of them while parsing a
`register` command which would be hard to follow. This removes that
behavior so that the error message is easier to read, and also makes the
error message on the engine side mention the plugin name so that it's
easier to tell which plugin needs to be updated.
The python plugin has also been modified to make testing this behavior
easier. Just change `NUSHELL_VERSION` in the script file to something
incompatible.
# User-Facing Changes
- Better error message
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
Change the `ignore` command to use `drain()` instead of collecting a
value.
This saves memory usage when piping a lot of output to `ignore`. There's
no reason to keep the output in memory if it's going to be discarded
anyway.
# User-Facing Changes
Probably none
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
Fix Nu release packages after upgrading to Nu v0.91
`mv` fails here:
https://github.com/nushell/nightly/actions/runs/8199461348/job/22424601700
with error:
```console
Error: nu:🐚:eval_block_with_input
× Eval block failed with pipeline input
╭─[/home/runner/work/nightly/nightly/.github/workflows/release-pkg.nu:158:18]
157 │
158 │ let files = (ls | get name)
· ─┬
· ╰── source value
159 │ let dest = if $env.RELEASE_TYPE == 'full' { $'($bin)-($version)-($FULL_NAME)' } else { $'($bin)-($version)-($target)' }
╰────
Error: × cannot move '/home/runner/work/nightly/nightly/output/nu' to a
│ subdirectory of itself, '/home/runner/work/nightly/nightly/output/nu-
│ 0.91.1-x86_64-unknown-linux-gnu//home/runner/work/nightly/nightly/output/
│ nu'
```
Is this a bug of `mv`? At least the `mv` command in 0.90.1 works
Bumps [windows](https://github.com/microsoft/windows-rs) from 0.52.0 to
0.54.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="148f4ebdda"><code>148f4eb</code></a>
Release 0.54.0 (<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2894">#2894</a>)</li>
<li><a
href="380df19277"><code>380df19</code></a>
Support additional <code>VARIANT</code> types (<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2892">#2892</a>)</li>
<li><a
href="cf65494df9"><code>cf65494</code></a>
Avoid <code>Result</code> transformation for <code>WIN32_ERROR</code>
(<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2890">#2890</a>)</li>
<li><a
href="77dc028222"><code>77dc028</code></a>
Workaround for confusing <code>LocalFree</code> behavior (<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2889">#2889</a>)</li>
<li><a
href="3807aba28c"><code>3807aba</code></a>
Add natural error translation for RPC (<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2883">#2883</a>)</li>
<li><a
href="2c2d78448a"><code>2c2d784</code></a>
Limit web workflow to Microsoft organization (<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2874">#2874</a>)</li>
<li><a
href="ef8246578f"><code>ef82465</code></a>
Update internal references to the current master version (<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2872">#2872</a>)</li>
<li><a
href="8fd448ba93"><code>8fd448b</code></a>
Fix <code>windows-targets</code> semver linker path compatibility (<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2870">#2870</a>)</li>
<li><a
href="c5511e7cc1"><code>c5511e7</code></a>
Update readme link</li>
<li><a
href="428a7ca2e6"><code>428a7ca</code></a>
Fix for <code>windows-targets::link</code> doc compatibility (<a
href="https://redirect.github.com/microsoft/windows-rs/issues/2868">#2868</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/microsoft/windows-rs/compare/0.52.0...0.54.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR introduces [workspaces
dependencies](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-dependencies-table).
The advantages are:
- a single place where dependency versions are declared
- reduces the number of files to change when upgrading a dependency
- reduces the risk of accidentally depending on 2 different versions of
the same dependency
I've only done a few so far. If this PR is accepted, I might continue
and progressively do the rest.
# User-Facing Changes
N/A
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
- Fixes issue #11982
# Description
Expressions with unbalanced parenthesis [excess closing ')' parenthesis]
will throw an error instead of interpreting ')' as a string.
Solved he same way as closing braces '}' are handled.
# User-Facing Changes
- Trailing closing parentheses ')' which do not match the number of
opening parentheses '(' will lead to a parse error.
- From what I have found in the documentation this is the intended
behavior, thus no documentation has been updated on my part
# Tests + Formatting
- Two tests added in src/tests/test_parser.rs
- All previous tests are still passing
- cargo fmt, clippy and test have been run
Unable to get the following command run
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
---------
Co-authored-by: Noak Jönsson <noakj@kth.se>
# Description
Converts help example results `to text` in `build-command-page`. This
prevents an `item_not_found` error when attempting to `help <command>`
on many legitimate commands.
Fixes#12073
# User-Facing Changes
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Bumps [open](https://github.com/Byron/open-rs) from 5.0.1 to 5.1.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/Byron/open-rs/releases">open's
releases</a>.</em></p>
<blockquote>
<h2>v5.1.1</h2>
<h3>Bug Fixes</h3>
<ul>
<li>add <code>shellexecute-on-windows</code> feature.
That way, it's possible to toggle on a feature that might
cause issues in some dependency trees that contain <code>flate2</code>
with <code>zlib-ng</code> backend.</li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge branch 'validate-linkage' (59886df)</li>
<li>Add <code>shellexecute-on-windows</code> feature. (74fd8ec)</li>
<li>Try to validate linkage on all platforms (8f26da4)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
<h2>v5.1.0</h2>
<h3>New Features</h3>
<ul>
<li>use <code>ShellExecuteW</code> for detached spawning on Windows</li>
</ul>
<h3>Commit Statistics</h3>
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/91">#91</a> from
amrbashir/feat/windows/detachded-using-shellexecutew (b268647)</li>
<li>Split into two functions for better readability (4506b2f)</li>
<li>Use <code>ShellExecuteW</code> for detached spawning on Windows
(191cb0e)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Byron/open-rs/blob/main/changelog.md">open's
changelog</a>.</em></p>
<blockquote>
<h2>5.1.1 (2024-03-03)</h2>
<h3>Bug Fixes</h3>
<ul>
<li><!-- raw HTML omitted --> add <code>shellexecute-on-windows</code>
feature.
That way, it's possible to toggle on a feature that might
cause issues in some dependency trees that contain <code>flate2</code>
with <code>zlib-ng</code> backend.</li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>3 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
<ul>
<li><strong>Uncategorized</strong>
<ul>
<li>Merge branch 'validate-linkage' (<a
href="59886df5db"><code>59886df</code></a>)</li>
<li>Add <code>shellexecute-on-windows</code> feature. (<a
href="74fd8ec005"><code>74fd8ec</code></a>)</li>
<li>Try to validate linkage on all platforms (<a
href="8f26da4ff1"><code>8f26da4</code></a>)</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
<h2>5.1.0 (2024-03-01)</h2>
<h3>New Features</h3>
<ul>
<li><!-- raw HTML omitted --> use <code>ShellExecuteW</code> for
detached spawning on Windows</li>
</ul>
<h3>Commit Statistics</h3>
<!-- raw HTML omitted -->
<ul>
<li>4 commits contributed to the release.</li>
<li>2 days passed between releases.</li>
<li>1 commit was understood as <a
href="https://www.conventionalcommits.org">conventional</a>.</li>
<li>0 issues like '(#ID)' were seen in commit messages</li>
</ul>
<h3>Commit Details</h3>
<!-- raw HTML omitted -->
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="0c916aefe1"><code>0c916ae</code></a>
Release open v5.1.1</li>
<li><a
href="59886df5db"><code>59886df</code></a>
Merge branch 'validate-linkage'</li>
<li><a
href="74fd8ec005"><code>74fd8ec</code></a>
fix: add <code>shellexecute-on-windows</code> feature.</li>
<li><a
href="8f26da4ff1"><code>8f26da4</code></a>
try to validate linkage on all platforms</li>
<li><a
href="21a73ee19d"><code>21a73ee</code></a>
Release open v5.1.0</li>
<li><a
href="b268647bd2"><code>b268647</code></a>
Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/91">#91</a> from
amrbashir/feat/windows/detachded-using-shellexecutew</li>
<li><a
href="4506b2f8ac"><code>4506b2f</code></a>
split into two functions for better readability</li>
<li><a
href="191cb0e220"><code>191cb0e</code></a>
feat: use <code>ShellExecuteW</code> for detached spawning on
Windows</li>
<li><a
href="f4ef7c9de9"><code>f4ef7c9</code></a>
Release open v5.0.2</li>
<li><a
href="0a25651fa0"><code>0a25651</code></a>
Merge pull request <a
href="https://redirect.github.com/Byron/open-rs/issues/89">#89</a> from
jackpot51/patch-1</li>
<li>Additional commits viewable in <a
href="https://github.com/Byron/open-rs/compare/v5.0.1...v5.1.1">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# Description
This PR fixes a globbing bug in the `du` command. The problem was that
`--exclude` needed to be a `NuGlob` instead of a `String`. A variety of
ways were tried to fix this, including spread operators and `into glob`
but none of them worked. Here's the [Discord
Conversation](https://discord.com/channels/601130461678272522/1214950311207243796/1214950311207243796)
that documents the attempts.
### Before
```nushell
❯ du $env.PWD -x crates/**
Error: nu:🐚:cant_convert
× Can't convert to string.
╭─[entry #1:1:16]
1 │ du $env.PWD -x crates/**
· ────┬────
· ╰── can't convert glob to string
╰────
```
### After
```nushell
❯ du $env.PWD -x crates/**
╭─#─┬────path────┬apparent─┬physical─┬───directories───┬files╮
│ 0 │ D:\nushell │ 55.6 MB │ 55.6 MB │ [table 17 rows] │ │
╰───┴────────────┴─────────┴─────────┴─────────────────┴─────╯
```
We release on Tuesdays and open dependabot PRs will rebase after the
version bump and thus consume unnecessary workers during release, thus
let's open new ones on Wednesday
# Description
This PR fixes the typo in the parameter `--table-name` instead of
`--table_name` in the `into sqlite` command.
fixes#12067
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Hello! This is my first PR to nushell, as I was looking at things for
#5066. The usage text for the date commands seemed fine to me, so this
is just a bit of a tidy up of the examples, mostly the description text.
# Description
- Remove two incorrect examples for `date to-record` and `date to-table`
where nothing was piped in (which causes an error in actual use).
- Fix misleading descriptions in `date to-timezone` which erroneously
referred to Hawaii's time zone.
- Standardise on "time zone" in written descriptions.
- Generally tidy up example descriptions and improve consistency.
# User-Facing Changes
Only in related help text showing examples.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fix typos in comments
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Signed-off-by: geekvest <cuimoman@sohu.com>
# Description
This improves the resolution of the sleep commands by simply not
clamping to the default 100ms ctrl+c signal checking loop if the
passed-in duration is shorter.
# User-Facing Changes
You can use smaller values in sleep.
```
# Before
timeit { 0..100 | each { |row| print $row; sleep 10ms; } } # +10sec
# After
timeit { 0..100 | each { |row| print $row; sleep 10ms; } } # +1sec
```
It still depends on the internal behavior of thread::sleep and the OS
timers. In windows it doesn't seem to go much lower than 15 or 10ms, or
0 if you asked for that.
# After Submitting
Sleep didn't have anything documenting its minimum value, so this should
be more in line with its standard procedure. It will still never sleep
for less time than allocated.
Did you know `sleep` can take multiple durations, and it'll add them up?
I didn't
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes sure `$nu.default-config-dir` and `$nu.plugin-path` are
canonicalized.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`$nu.default-config-dir` (and `$nu.plugin-path`) will now give canonical
paths, with symlinks and whatnot resolved.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
I've added a couple of tests to check that even if the config folder
and/or any of the config files within are symlinks, the `$nu.*`
variables are properly canonicalized. These tests unfortunately only run
on Linux and MacOS, because I couldn't figure out how to change the
config directory on Windows. Also, given that they involve creating
files, I'm not sure if they're excessive, so I could remove one or two
of them.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Show an example of loading from a custom file, and an example of adding
multiple entry to PATH. Loading from a custom file will hopefully allow
for greater modularity of configuration files out of the box for new
users. Adding multiple paths to PATH is very common, and will help new
users to.
Adds this:
```
# To add multiple paths to PATH this may be simpler:
# use std "path add"
# $env.PATH = ($env.PATH | split row (char esep))
# path add /some/path
# path add ($env.CARGO_HOME | path join "bin")
# path add ($env.HOME | path join ".local" "bin")
# $env.PATH = ($env.PATH | uniq)
# To load from a custom file you can use:
# source ($nu.default-config-dir | path join 'custom.nu')
```
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
Replace panics with errors in thread spawning.
Also adds `IntoSpanned` trait for easily constructing `Spanned`, and an
implementation of `From<Spanned<std::io::Error>>` for `ShellError`,
which is used to provide context for the error wherever there was a span
conveniently available. In general this should make it more convenient
to do the right thing with `std::io::Error` and always add a span to it
when it's possible to do so.
# User-Facing Changes
Fewer panics!
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# Description
This PR allows `view source` to view aliases again. It looks like it's
been half broken for a while now.
fixes#12044
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Currently, in the test for interpolating strings at parse-time, the
formatted string includes `(X years ago)` (from formatting a date) (test
came from https://github.com/nushell/nushell/pull/11562). I didn't
realize when I was writing it that it would have to be updated every
year. This PR uses regex to check the output instead.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This command mixes input from multiple sources and sends items to the
final stream as soon as they're available. It can be called as part of a
pipeline with input, or it can take multiple closures and mix them that
way.
See `crates/nu-command/tests/commands/interleave.rs` for a practical
example. I imagine this will be most often used to run multiple commands
in parallel and print their outputs line-by-line. A stdlib command could
potentially use `interleave` to make this particular use case easier.
It's quite common to wish that nushell had a command for running things
in the background, and instead of providing job control, this provides
an alternative to some use cases for that by just allowing multiple
commands to run simultaneously and direct their output to the same
place.
This enables certain things that are not possible with `par-each` - for
example, you may wish to run `make` across several projects in parallel:
```nushell
(ls projects).name | par-each { |project| cd $project; make }
```
This works well enough, but the output will only be available after each
`make` command finishes. `interleave` allows you to get each line:
```nushell
interleave ...(
(ls projects).name | each { |project|
{
cd $project
make | lines | each { |line| {project: $project, out: $line} }
}
}
)
```
The result of this is a stream that you could process further - for
example, by saving to a text file.
Note that the closures themselves are not run in parallel. The initial
execution happens serially, and then the streams are consumed in
parallel.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Adds a new command.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
