# Description
This improves the error when the determined output of a custom command
doesn't match the specified output type by adding the actual determined
output type.
# User-Facing Changes
Previous: `command doesn't output {0}`
New: `expected {0}, but command outputs {1}`
# Tests + Formatting
Passing.
# After Submitting
- [ ] release notes? (minor change, but helpful)
# Description
Allows `Stack` to have a modified local `Config`, which is updated
immediately when `$env.config` is assigned to. This means that even
within a script, commands that come after `$env.config` changes will
always see those changes in `Stack::get_config()`.
Also fixed a lot of cases where `engine_state.get_config()` was used
even when `Stack` was available.
Closes#13324.
# User-Facing Changes
- Config changes apply immediately after the assignment is executed,
rather than whenever config is read by a command that needs it.
- Potentially slower performance when executing a lot of lines that
change `$env.config` one after another. Recommended to get `$env.config`
into a `mut` variable first and do modifications, then assign it back.
- Much faster performance when executing a script that made
modifications to `$env.config`, as the changes are only parsed once.
# Tests + Formatting
All passing.
# After Submitting
- [ ] release notes
# Description
`Signature::get_positional()` was returning an owned `PositionalArg`,
which contains a bunch of strings. `ClosureEval` uses this in
`try_add_arg`, making all of that unnecessary cloning a little bit hot.
# User-Facing Changes
Slightly better performance
# Description
Just more efficient allocation during `Stack::gather_captures()` so that
we don't have to grow the `Vec` needlessly.
# User-Facing Changes
Slightly better performance.
# Description
This is another easy performance lift that just changes `env_vars` and
`env_hidden` on `Stack` to use `Arc`. I noticed that these were being
cloned on essentially every closure invocation during captures
gathering, so we're paying the cost for all of that even when we don't
change anything. On top of that, for `env_vars`, there's actually an
entirely fresh `HashMap` created for each child scope, so it's highly
unlikely that we'll modify the parent ones.
Uses `Arc::make_mut` instead to take care of things when we need to
mutate something, and most of the time nothing has to be cloned at all.
# Benchmarks
The benefits are greater the more calls there are to env-cloning
functions like `captures_to_stack()`. Calling custom commands in a loop
is basically best case for a performance improvement. Plain `each` with
a literal block isn't so badly affected because the stack is set up
once.
## random_bytes.nu
```nushell
use std bench
do {
const SCRIPT = ../nu_scripts/benchmarks/random-bytes.nu
let before_change = bench { nu $SCRIPT }
let after_change = bench { target/release/nu $SCRIPT }
{
before: ($before_change | reject times),
after: ($after_change | reject times)
}
}
```
```
╭────────┬──────────────────────────────╮
│ │ ╭──────┬───────────────────╮ │
│ before │ │ mean │ 603ms 759µs 727ns │ │
│ │ │ min │ 593ms 298µs 167ns │ │
│ │ │ max │ 648ms 612µs 291ns │ │
│ │ │ std │ 9ms 335µs 251ns │ │
│ │ ╰──────┴───────────────────╯ │
│ │ ╭──────┬───────────────────╮ │
│ after │ │ mean │ 518ms 400µs 557ns │ │
│ │ │ min │ 507ms 762µs 583ns │ │
│ │ │ max │ 566ms 695µs 166ns │ │
│ │ │ std │ 9ms 554µs 767ns │ │
│ │ ╰──────┴───────────────────╯ │
╰────────┴──────────────────────────────╯
```
## gradient_benchmark_no_check.nu
```nushell
use std bench
do {
const SCRIPT = ../nu_scripts/benchmarks/gradient_benchmark_no_check.nu
let before_change = bench { nu $SCRIPT }
let after_change = bench { target/release/nu $SCRIPT }
{
before: ($before_change | reject times),
after: ($after_change | reject times)
}
}
```
```
╭────────┬──────────────────────────────╮
│ │ ╭──────┬───────────────────╮ │
│ before │ │ mean │ 146ms 543µs 380ns │ │
│ │ │ min │ 142ms 416µs 166ns │ │
│ │ │ max │ 189ms 595µs │ │
│ │ │ std │ 7ms 140µs 342ns │ │
│ │ ╰──────┴───────────────────╯ │
│ │ ╭──────┬───────────────────╮ │
│ after │ │ mean │ 134ms 211µs 678ns │ │
│ │ │ min │ 132ms 433µs 125ns │ │
│ │ │ max │ 135ms 722µs 583ns │ │
│ │ │ std │ 793µs 134ns │ │
│ │ ╰──────┴───────────────────╯ │
╰────────┴──────────────────────────────╯
```
# User-Facing Changes
Better performance, particularly for custom commands, especially if
there are a lot of environment variables. Nothing else.
# Tests + Formatting
All passing.
# Description
This PR adds an internal representation language to Nushell, offering an
alternative evaluator based on simple instructions, stream-containing
registers, and indexed control flow. The number of registers required is
determined statically at compile-time, and the fixed size required is
allocated upon entering the block.
Each instruction is associated with a span, which makes going backwards
from IR instructions to source code very easy.
Motivations for IR:
1. **Performance.** By simplifying the evaluation path and making it
more cache-friendly and branch predictor-friendly, code that does a lot
of computation in Nushell itself can be sped up a decent bit. Because
the IR is fairly easy to reason about, we can also implement
optimization passes in the future to eliminate and simplify code.
2. **Correctness.** The instructions mostly have very simple and
easily-specified behavior, so hopefully engine changes are a little bit
easier to reason about, and they can be specified in a more formal way
at some point. I have made an effort to document each of the
instructions in the docs for the enum itself in a reasonably specific
way. Some of the errors that would have happened during evaluation
before are now moved to the compilation step instead, because they don't
make sense to check during evaluation.
3. **As an intermediate target.** This is a good step for us to bring
the [`new-nu-parser`](https://github.com/nushell/new-nu-parser) in at
some point, as code generated from new AST can be directly compared to
code generated from old AST. If the IR code is functionally equivalent,
it will behave the exact same way.
4. **Debugging.** With a little bit more work, we can probably give
control over advancing the virtual machine that `IrBlock`s run on to
some sort of external driver, making things like breakpoints and single
stepping possible. Tools like `view ir` and [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir) make it easier than
before to see what exactly is going on with your Nushell code.
The goal is to eventually replace the AST evaluator entirely, once we're
sure it's working just as well. You can help dogfood this by running
Nushell with `$env.NU_USE_IR` set to some value. The environment
variable is checked when Nushell starts, so config runs with IR, or it
can also be set on a line at the REPL to change it dynamically. It is
also checked when running `do` in case within a script you want to just
run a specific piece of code with or without IR.
# Example
```nushell
view ir { |data|
mut sum = 0
for n in $data {
$sum += $n
}
$sum
}
```
```gas
# 3 registers, 19 instructions, 0 bytes of data
0: load-literal %0, int(0)
1: store-variable var 904, %0 # let
2: drain %0
3: drop %0
4: load-variable %1, var 903
5: iterate %0, %1, end 15 # for, label(1), from(14:)
6: store-variable var 905, %0
7: load-variable %0, var 904
8: load-variable %2, var 905
9: binary-op %0, Math(Plus), %2
10: span %0
11: store-variable var 904, %0
12: load-literal %0, nothing
13: drain %0
14: jump 5
15: drop %0 # label(0), from(5:)
16: drain %0
17: load-variable %0, var 904
18: return %0
```
# Benchmarks
All benchmarks run on a base model Mac Mini M1.
## Iterative Fibonacci sequence
This is about as best case as possible, making use of the much faster
control flow. Most code will not experience a speed improvement nearly
this large.
```nushell
def fib [n: int] {
mut a = 0
mut b = 1
for _ in 2..=$n {
let c = $a + $b
$a = $b
$b = $c
}
$b
}
use std bench
bench { 0..50 | each { |n| fib $n } }
```
IR disabled:
```
╭───────┬─────────────────╮
│ mean │ 1ms 924µs 665ns │
│ min │ 1ms 700µs 83ns │
│ max │ 3ms 450µs 125ns │
│ std │ 395µs 759ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
IR enabled:
```
╭───────┬─────────────────╮
│ mean │ 452µs 820ns │
│ min │ 427µs 417ns │
│ max │ 540µs 167ns │
│ std │ 17µs 158ns │
│ times │ [list 50 items] │
╰───────┴─────────────────╯
```
##
[gradient_benchmark_no_check.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/gradient_benchmark_no_check.nu)
IR disabled:
```
╭───┬──────────────────╮
│ 0 │ 27ms 929µs 958ns │
│ 1 │ 21ms 153µs 459ns │
│ 2 │ 18ms 639µs 666ns │
│ 3 │ 19ms 554µs 583ns │
│ 4 │ 13ms 383µs 375ns │
│ 5 │ 11ms 328µs 208ns │
│ 6 │ 5ms 659µs 542ns │
╰───┴──────────────────╯
```
IR enabled:
```
╭───┬──────────────────╮
│ 0 │ 22ms 662µs │
│ 1 │ 17ms 221µs 792ns │
│ 2 │ 14ms 786µs 708ns │
│ 3 │ 13ms 876µs 834ns │
│ 4 │ 13ms 52µs 875ns │
│ 5 │ 11ms 269µs 666ns │
│ 6 │ 6ms 942µs 500ns │
╰───┴──────────────────╯
```
##
[random-bytes.nu](https://github.com/nushell/nu_scripts/blob/main/benchmarks/random-bytes.nu)
I got pretty random results out of this benchmark so I decided not to
include it. Not clear why.
# User-Facing Changes
- IR compilation errors may appear even if the user isn't evaluating
with IR.
- IR evaluation can be enabled by setting the `NU_USE_IR` environment
variable to any value.
- New command `view ir` pretty-prints the IR for a block, and `view ir
--json` can be piped into an external tool like [`explore
ir`](https://github.com/devyn/nu_plugin_explore_ir).
# Tests + Formatting
All tests are passing with `NU_USE_IR=1`, and I've added some more eval
tests to compare the results for some very core operations. I will
probably want to add some more so we don't have to always check
`NU_USE_IR=1 toolkit test --workspace` on a regular basis.
# After Submitting
- [ ] release notes
- [ ] further documentation of instructions?
- [ ] post-release: publish `nu_plugin_explore_ir`
# Description
This PR introduces a new `Signals` struct to replace our adhoc passing
around of `ctrlc: Option<Arc<AtomicBool>>`. Doing so has a few benefits:
- We can better enforce when/where resetting or triggering an interrupt
is allowed.
- Consolidates `nu_utils::ctrl_c::was_pressed` and other ad-hoc
re-implementations into a single place: `Signals::check`.
- This allows us to add other types of signals later if we want. E.g.,
exiting or suspension.
- Similarly, we can more easily change the underlying implementation if
we need to in the future.
- Places that used to have a `ctrlc` of `None` now use
`Signals::empty()`, so we can double check these usages for correctness
in the future.
# Description
Refactors `help operators` so that its output is always up to date with
the parser.
# User-Facing Changes
- The order of output rows for `help operators` was changed.
- `not` is now listed as a boolean operator instead of a comparison
operator.
- Edited some of the descriptions for the operators.
# Description
Bug fix: `PipelineData::check_external_failed()` was not preserving the
original `type_` and `known_size` attributes of the stream passed in for
streams that come from children, so `external-command | into binary` did
not work properly and always ended up still being unknown type.
# User-Facing Changes
The following test case now works as expected:
```nushell
> head -c 2 /dev/urandom | into binary
# Expected: pretty hex dump of binary
# Previous behavior: just raw binary in the terminal
```
# Tests + Formatting
Added a test to cover this to `into binary`
This reverts commit 0cfd5fbece.
The original PR messed up syntax higlighting of aliases and causes
panics of completion in the presence of alias.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Part of https://github.com/nushell/nushell/issues/12963, step 2.
This PR refactors Call and related argument structures to remove their
dependency on `Expression::span` which will be removed in the future.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Should be none. If you see some error messages that look broken, please
report.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Provides the ability to use http commands as part of a pipeline.
Additionally, this pull requests extends the pipeline metadata to add a
content_type field. The content_type metadata field allows commands such
as `to json` to set the metadata in the pipeline allowing the http
commands to use it when making requests.
This pull request also introduces the ability to directly stream http
requests from streaming pipelines.
One other small change is that Content-Type will always be set if it is
passed in to the http commands, either indirectly or throw the content
type flag. Previously it was not preserved with requests that were not
of type json or form data.
# User-Facing Changes
* `http post`, `http put`, `http patch`, `http delete` can be used as
part of a pipeline
* `to text`, `to json`, `from json` all set the content_type metadata
field and the http commands will utilize them when making requests.
# Description
Fixes: https://github.com/nushell/nushell/issues/12099
Currently if user run `use voice.nu`, and file is unchanged, then run
`use voice.nu` again. nushell will use the module directly, even if
submodule inside `voice.nu` is changed.
After discussed with @kubouch, I think it's ok to re-parse the module
file when:
1. It exports sub modules which are defined by a file
2. It uses other modules which are defined by a file
## About the change:
To achieve the behavior, we need to add 2 attributes to `Module`:
1. `imported_modules`: it tracks the other modules is imported by the
givem `module`, e.g: `use foo.nu`
2. `file`: the path of a module, if a module is defined by a file, it
will be `Some(path)`, or else it will be `None`.
After the change:
use voice.nu always read the file and parse it.
use voice will still use the module which is saved in EngineState.
# User-Facing Changes
use `xxx.nu` will read the file and parse it if it exports submodules or
uses submodules
# Tests + Formatting
Done
---------
Co-authored-by: Jakub Žádník <kubouch@gmail.com>
# Description
This PR implements script or module autoloading. It does this by finding
the `$nu.vendor-autoload-dir`, lists the contents and sorts them by file
name. These files are evaluated in that order.
To see what's going on, you can use `--log-level warn`
```
❯ cargo r -- --log-level warn
Finished dev [unoptimized + debuginfo] target(s) in 0.58s
Running `target\debug\nu.exe --log-level warn`
2024-06-24 09:23:20.494 PM [WARN ] nu::config_files: set_config_path() cwd: "C:\\Users\\fdncred\\source\\repos\\nushell", default_config: config.nu, key: config-path, config_file_specified: None
2024-06-24 09:23:20.495 PM [WARN ] nu::config_files: set_config_path() cwd: "C:\\Users\\fdncred\\source\\repos\\nushell", default_config: env.nu, key: env-path, config_file_specified: None
2024-06-24 09:23:20.629 PM [WARN ] nu::config_files: setup_config() config_file_specified: None, env_file_specified: None, login: false
2024-06-24 09:23:20.660 PM [WARN ] nu::config_files: read_config_file() config_file_specified: None, is_env_config: true
Hello, from env.nu
2024-06-24 09:23:20.679 PM [WARN ] nu::config_files: read_config_file() config_file_specified: None, is_env_config: false
Hello, from config.nu
Hello, from defs.nu
Activating Microsoft Visual Studio environment.
2024-06-24 09:23:21.398 PM [WARN ] nu::config_files: read_vendor_autoload_files() src\config_files.rs:234:9
2024-06-24 09:23:21.399 PM [WARN ] nu::config_files: read_vendor_autoload_files: C:\ProgramData\nushell\vendor\autoload
2024-06-24 09:23:21.399 PM [WARN ] nu::config_files: AutoLoading: "C:\\ProgramData\\nushell\\vendor\\autoload\\01_get-weather.nu"
2024-06-24 09:23:21.675 PM [WARN ] nu::config_files: AutoLoading: "C:\\ProgramData\\nushell\\vendor\\autoload\\02_temp.nu"
2024-06-24 09:23:21.817 PM [WARN ] nu_cli::repl: Terminal doesn't support use_kitty_protocol config
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Fixesnushell/nushell#13207
# Description
This fixes the parsing of command usage when that command comes from a
file with CRLF line endings.
See nushell/nushell#13207 for more details.
# User-Facing Changes
Users on Windows will get correct autocompletion for `std` commands.
# Description
In #13031 I added the derive macros for `FromValue` and `IntoValue`. In
that implementation, in particular for structs with named fields, it was
not possible to omit fields while loading them from a value, when the
field is an `Option`. This PR adds extra handling for this behavior, so
if a field is an `Option` and that field is missing in the `Value`, then
the field becomes `None`. This behavior is also tested in
`nu_protocol::value::test_derive::missing_options`.
# User-Facing Changes
When using structs for options or similar, users can now just emit
fields in the record and the derive `from_value` method will be able to
understand this, if the struct has an `Option` type for that field.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
A showcase for this feature would be great, I tried to use the current
derive macro in a plugin of mine for a config but without this addition,
they are annoying to use. So, when this is done, I would add an example
for such plugin configs that may be loaded via `FromValue`.
# Description
This allows plugins to report their version (and potentially other
metadata in the future). The version is shown in `plugin list` and in
`version`.
The metadata is stored in the registry file, and reflects whatever was
retrieved on `plugin add`, not necessarily the running binary. This can
help you to diagnose if there's some kind of mismatch with what you
expect. We could potentially use this functionality to show a warning or
error if a plugin being run does not have the same version as what was
in the cache file, suggesting `plugin add` be run again, but I haven't
done that at this point.
It is optional, and it requires the plugin author to make some code
changes if they want to provide it, since I can't automatically
determine the version of the calling crate or anything tricky like that
to do it.
Example:
```
> plugin list | select name version is_running pid
╭───┬────────────────┬─────────┬────────────┬─────╮
│ # │ name │ version │ is_running │ pid │
├───┼────────────────┼─────────┼────────────┼─────┤
│ 0 │ example │ 0.93.1 │ false │ │
│ 1 │ gstat │ 0.93.1 │ false │ │
│ 2 │ inc │ 0.93.1 │ false │ │
│ 3 │ python_example │ 0.1.0 │ false │ │
╰───┴────────────────┴─────────┴────────────┴─────╯
```
cc @maxim-uvarov (he asked for it)
# User-Facing Changes
- `plugin list` gets a `version` column
- `version` shows plugin versions when available
- plugin authors *should* add `fn metadata()` to their `impl Plugin`,
but don't have to
# Tests + Formatting
Tested the low level stuff and also the `plugin list` column.
# After Submitting
- [ ] update plugin guide docs
- [ ] update plugin protocol docs (`Metadata` call & response)
- [ ] update plugin template (`fn metadata()` should be easy)
- [ ] release notes
# Description
This PR adds a directory to the `$nu` constant that shows where the
system level autoload directory is located at. This folder is modifiable
at compile time with environment variables.
```rust
// Create a system level directory for nushell scripts, modules, completions, etc
// that can be changed by setting the NU_VENDOR_AUTOLOAD_DIR env var on any platform
// before nushell is compiled OR if NU_VENDOR_AUTOLOAD_DIR is not set for non-windows
// systems, the PREFIX env var can be set before compile and used as PREFIX/nushell/vendor/autoload
// pseudo code
// if env var NU_VENDOR_AUTOLOAD_DIR is set, in any platform, use it
// if not, if windows, use ALLUSERPROFILE\nushell\vendor\autoload
// if not, if non-windows, if env var PREFIX is set, use PREFIX/share/nushell/vendor/autoload
// if not, use the default /usr/share/nushell/vendor/autoload
```
### Windows default
```nushell
❯ $nu.vendor-autoload-dir
C:\ProgramData\nushell\vendor\autoload
```
### Non-Windows default
```nushell
❯ $nu.vendor-autoload-dir
/usr/local/share/nushell/vendor/autoload
```
### Non-Windows with PREFIX set
```nushell
❯ PREFIX=/usr/bob cargo r
❯ $nu.vendor-autoload-dir
/usr/bob/share/nushell/vendor/autoload
```
### Non-Windows with NU_VENDOR_AUTOLOAD_DIR set
```nushell
❯ NU_VENDOR_AUTOLOAD_DIR=/some/other/path/nushell/stuff cargo r
❯ $nu.vendor-autoload-dir
/some/other/path/nushell/stuff
```
> [!IMPORTANT]
To be clear, this PR does not do the auto-loading, it just sets up the
folder to support that functionality that can be added in a later PR.
The PR also does not create the folder defined. It's just setting the
$nu constant.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
We've had a lot of different issues and PRs related to arg handling with
externals since the rewrite of `run-external` in #12921:
- #12950
- #12955
- #13000
- #13001
- #13021
- #13027
- #13028
- #13073
Many of these are caused by the argument handling of external calls and
`run-external` being very special and involving the parser handing
quoted strings over to `run-external` so that it knows whether to expand
tildes and globs and so on. This is really unusual and also makes it
harder to use `run-external`, and also harder to understand it (and
probably is part of the reason why it was rewritten in the first place).
This PR moves a lot more of that work over to the parser, so that by the
time `run-external` gets it, it's dealing with much more normal Nushell
values. In particular:
- Unquoted strings are handled as globs with no expand
- The unescaped-but-quoted handling of strings was removed, and the
parser constructs normal looking strings instead, removing internal
quotes so that `run-external` doesn't have to do it
- Bare word interpolation is now supported and expansion is done in this
case
- Expressions typed as `Glob` containing `Expr::StringInterpolation` now
produce `Value::Glob` instead, with the quoted status from the expr
passed through so we know if it was a bare word
- Bare word interpolation for values typed as `glob` now possible, but
not implemented
- Because expansion is now triggered by `Value::Glob(_, false)` instead
of looking at the expr, externals now support glob types
# User-Facing Changes
- Bare word interpolation works for external command options, and
otherwise embedded in other strings:
```nushell
^echo --foo=(2 + 2) # prints --foo=4
^echo -foo=$"(2 + 2)" # prints -foo=4
^echo foo="(2 + 2)" # prints (no interpolation!) foo=(2 + 2)
^echo foo,(2 + 2),bar # prints foo,4,bar
```
- Bare word interpolation expands for external command head/args:
```nushell
let name = "exa"
~/.cargo/bin/($name) # this works, and expands the tilde
^$"~/.cargo/bin/($name)" # this doesn't expand the tilde
^echo ~/($name)/* # this glob is expanded
^echo $"~/($name)/*" # this isn't expanded
```
- Ndots are now supported for the head of an external command
(`^.../foo` works)
- Glob values are now supported for head/args of an external command,
and expanded appropriately:
```nushell
^("~/.cargo/bin/exa" | into glob) # the tilde is expanded
^echo ("*.txt" | into glob) # this glob is expanded
```
- `run-external` now works more like any other command, without
expecting a special call convention
for its args:
```nushell
run-external echo "'foo'"
# before PR: 'foo'
# after PR: foo
run-external echo "*.txt"
# before PR: (glob is expanded)
# after PR: *.txt
```
# Tests + Formatting
Lots of tests added and cleaned up. Some tests that weren't active on
Windows changed to use `nu --testbin cococo` so that they can work.
Added a test for Linux only to make sure tilde expansion of commands
works, because changing `HOME` there causes `~` to reliably change.
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
- [ ] release notes: make sure to mention the new syntaxes that are
supported
# Description
After discussing with @sholderbach the cumbersome usage of
`nu_protocol::Value` in Rust, I created a derive macro to simplify it.
I’ve added a new crate called `nu-derive-value`, which includes two
macros, `IntoValue` and `FromValue`. These are re-exported in
`nu-protocol` and should be encouraged to be used via that re-export.
The macros ensure that all types can easily convert from and into
`Value`. For example, as a plugin author, you can define your plugin
configuration using a Rust struct and easily convert it using
`FromValue`. This makes plugin configuration less of a hassle.
I introduced the `IntoValue` trait for a standardized approach to
converting values into `Value` (and a fallible variant `TryIntoValue`).
This trait could potentially replace existing `into_value` methods.
Along with this, I've implemented `FromValue` for several standard types
and refined other implementations to use blanket implementations where
applicable.
I made these design choices with input from @devyn.
There are more improvements possible, but this is a solid start and the
PR is already quite substantial.
# User-Facing Changes
For `nu-protocol` users, these changes simplify the handling of
`Value`s. There are no changes for end-users of nushell itself.
# Tests + Formatting
Documenting the macros itself is not really possible, as they cannot
really reference any other types since they are the root of the
dependency graph. The standard library has the same problem
([std::Debug](https://doc.rust-lang.org/stable/std/fmt/derive.Debug.html)).
However I documented the `FromValue` and `IntoValue` traits completely.
For testing, I made of use `proc-macro2` in the derive macro code. This
would allow testing the generated source code. Instead I just tested
that the derived functionality is correct. This is done in
`nu_protocol::value::test_derive`, as a consumer of `nu-derive-value`
needs to do the testing of the macro usage. I think that these tests
should provide a stable baseline so that users can be sure that the impl
works.
# After Submitting
With these macros available, we can probably use them in some examples
for plugins to showcase the use of them.
# Description
This PR is an attempt to add a standard location for people to put
completions in. I saw this topic come up again recently and IIRC we
decided to create a standard location. I used the dirs-next crate to
dictate where these locations are. I know some people won't like that
but at least this gets the ball rolling in a direction that has a
standard directory.
This is what the default NU_LIB_DIRS looks like now in the
default_env.nu. It should also be like this when starting nushell with
`nu -n`
```nushell
$env.NU_LIB_DIRS = [
($nu.default-config-dir | path join 'scripts') # add <nushell-config-dir>/scripts
($nu.data-dir | path join 'completions') # default home for nushell completions
]
```
I also added these default folders to the `$nu` variable so now there is
`$nu.data-path` and `$nu.cache-path`.
## Data Dir Default
While I was in there, I also decided to add a cache dir
## Cache Dir Default
### This is what the default looks like in Ubuntu.
### This is what it looks like with XDG_CACHE_HOME and XDG_DATA_HOME
overridden
```nushell
XDG_DATA_HOME=/tmp/data_home XDG_CACHE_HOME=/tmp/cache_home cargo r
```
### This is what the defaults look like in Windows (username scrubbed to
protect the innocent)
How my NU_LIB_DIRS is set in the images above
```nushell
$env.NU_LIB_DIRS = [
($nu.default-config-dir | path join 'scripts') # add <nushell-config-dir>/scripts
'/Users/fdncred/src/nu_scripts'
($nu.config-path | path dirname)
($nu.data-dir | path join 'completions') # default home for nushell completions
]
```
Let the debate begin.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
#7777 removed the `--numbered` flag from `each`, `par-each`, `reduce`,
and `each while`. It was suggested at the time that it should be removed
from `for` as well, but for several reasons it wasn't.
This PR deprecates `--numbered` in anticipation of removing it in 0.96.
Note: Please review carefully, as this is my first "real" Rust/Nushell
code. I was hoping that some prior commit would be useful as a template,
but since this was an argument on a parser keyword, I didn't find too
much useful. So I had to actually find the relevant helpers in the code
and `nu_protocol` doc and learn how to use them - oh darn ;-) But please
make sure I did it correctly.
# User-Facing Changes
* Use of `--numbered` will result in a deprecation warning.
* Changed help example to demonstrate the new syntax.
* Help shows deprecation notice on the flag
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Part of https://github.com/nushell/nushell/issues/12963, step 2.
This PR refactors changes the use of `expression.span` to
`expression.span_id` via a new helper `Expression::span()`. A new
`GetSpan` is added to abstract getting the span from both `EngineState`
and `StateWorkingSet`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
`format pattern` loses the ability to use variables in the pattern,
e.g., `... | format pattern 'value of {$it.name} is {$it.value}'`. This
is because the command did a custom parse-eval cycle, creating spans
that are not merged into the main engine state. We could clone the
engine state, add Clone trait to StateDelta and merge the cloned delta
to the cloned state, but IMO there is not much value from having this
ability, since we have string interpolation nowadays: `... | $"value of
($in.name) is ($in.value)"`.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close https://github.com/nushell/nushell/issues/12874
- fixes https://github.com/nushell/nushell/issues/12874
I want to fix the issue which is induced by the fix for
https://github.com/nushell/nushell/issues/12369. after this pr. This pr
induced a new error for unix system, in order to show coredump messages
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
- this PR should close https://github.com/nushell/nushell/issues/12874
- fixes https://github.com/nushell/nushell/issues/12874
I want to fix the issue which is induced by the fix for
https://github.com/nushell/nushell/issues/12369. after this pr. This pr
induced a new error for unix system, in order to show coredump messages
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
after fix for 12874, coredump message is messing, so I want to fix it
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Darren Schroeder <343840+fdncred@users.noreply.github.com>
# Description
First part of SpanID refactoring series. This PR adds a `SpanId` type
and a corresponding `span_id` field to `Expression`. Parser creating
expressions will now add them to an array in `StateWorkingSet`,
generates a corresponding ID and saves the ID to the Expression. The IDs
are not used anywhere yet.
For the rough overall plan, see
https://github.com/nushell/nushell/issues/12963.
# User-Facing Changes
Hopefully none. This is only a refactor of Nushell's internals that
shouldn't have visible side effects.
# Tests + Formatting
# After Submitting
# Description
Currently, this pipeline doesn't work `open --raw file | take 100`,
since the type of the byte stream is `Unknown`, but `take` expects
`Binary` streams. This PR changes commands that expect
`ByteStreamType::Binary` to also work with `ByteStreamType::Unknown`.
This was done by adding two new methods to `ByteStreamType`:
`is_binary_coercible` and `is_string_coercible`. These return true if
the type is `Unknown` or matches the type in the method name.
# Description
Makes the `from json --objects` command produce a stream, and read
lazily from an input stream to produce its output.
Also added a helper, `PipelineData::get_type()`, to make it easier to
construct a wrong type error message when matching on `PipelineData`. I
expect checking `PipelineData` for either a string value or an `Unknown`
or `String` typed `ByteStream` will be very, very common. I would have
liked to have a helper that just returns a readable stream from either,
but that would either be a bespoke enum or a `Box<dyn BufRead>`, which
feels like it wouldn't be so great for performance. So instead, taking
the approach I did here is probably better - having a function that
accepts the `impl BufRead` and matching to use it.
# User-Facing Changes
- `from json --objects` no longer collects its input, and can be used
for large datasets or streams that produce values over time.
# Tests + Formatting
All passing.
# After Submitting
- [ ] release notes
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
As discussed in https://github.com/nushell/nushell/pull/12749, we no
longer need to call `std::env::set_current_dir()` to sync `$env.PWD`
with the actual working directory. This PR removes the call from
`EngineState::merge_env()`.
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
1. With the `-l` flag, `debug profile` now collects files and line
numbers of profiled pipeline elements
2. Error from the profiled closure will be reported instead of silently
ignored.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New `--lines(-l)` flag to `debug profile`. The command will also fail if
the profiled closure fails, so technically it is a breaking change.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
- **Remove unused `pathdiff` dep in `nu-cli`**
- **Remove unused `serde_json` dep on `nu-protocol`**
- Unnecessary after moving the plugin file to msgpack (still a
dev-dependency)
# Description
Removes the old `nu-cmd-dataframe` crate in favor of the polars plugin.
As such, this PR also removes the `dataframe` feature, related CI, and
full releases of nushell.
# Description
This PR allows byte streams to optionally be colored as being
specifically binary or string data, which guarantees that they'll be
converted to `Binary` or `String` appropriately on `into_value()`,
making them compatible with `Type` guarantees. This makes them
significantly more broadly usable for command input and output.
There is still an `Unknown` type for byte streams coming from external
commands, which uses the same behavior as we previously did where it's a
string if it's UTF-8.
A small number of commands were updated to take advantage of this, just
to prove the point. I will be adding more after this merges.
# User-Facing Changes
- New types in `describe`: `string (stream)`, `binary (stream)`
- These commands now return a stream if their input was a stream:
- `into binary`
- `into string`
- `bytes collect`
- `str join`
- `first` (binary)
- `last` (binary)
- `take` (binary)
- `skip` (binary)
- Streams that are explicitly binary colored will print as a streaming
hexdump
- example:
```nushell
1.. | each { into binary } | bytes collect
```
# Tests + Formatting
I've added some tests to cover it at a basic level, and it doesn't break
anything existing, but I do think more would be nice. Some of those will
come when I modify more commands to stream.
# After Submitting
There are a few things I'm not quite satisfied with:
- **String trimming behavior.** We automatically trim newlines from
streams from external commands, but I don't think we should do this with
internal commands. If I call a command that happens to turn my string
into a stream, I don't want the newline to suddenly disappear. I changed
this to specifically do it only on `Child` and `File`, but I don't know
if this is quite right, and maybe we should bring back the old flag for
`trim_end_newline`
- **Known binary always resulting in a hexdump.** It would be nice to
have a `print --raw`, so that we can put binary data on stdout
explicitly if we want to. This PR doesn't change how external commands
work though - they still dump straight to stdout.
Otherwise, here's the normal checklist:
- [ ] release notes
- [ ] docs update for plugin protocol changes (added `type` field)
---------
Co-authored-by: Ian Manske <ian.manske@pm.me>
# Description
Changes `get_full_help` to take a `&dyn Command` instead of multiple
arguments (`&Signature`, `&Examples` `is_parser_keyword`). All of these
arguments can be gathered from a `Command`, so there is no need to pass
the pieces to `get_full_help`.
This PR also fixes an issue where the search terms are not shown if
`--help` is used on a command.
