<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
What it says on the tin, this change adds the `mac` and `ip` columns to
the `sys net` command, where `mac` is the interface mac address and `ip`
is a record containing ipv4 and ipv6 addresses as well as whether or not
the address is loopback and multicast. I thought it might be useful to
have this information available in Nushell. This change basically just
pulls extra information out of the underlying structs in the
`sysinfo::Networks` struct. Here's a screenshot from my system:
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
- Adds `mac` and `ip` columns to the `sys net` command, where `mac`
contains the interface's mac address and `ip` contains information
extracted from the `std::net::IpAddr` struct, including address,
protocol, whether or not the address is loopback, and whether or not
it's multicast
# Tests + Formatting
Didn't add any tests specifically, didn't seem like there were any
relevant tests. Ran existing tests and formatting.
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# Description
I was reading through the documentation yesterday, when I stumbled upon
[this
section](https://www.nushell.sh/book/pipelines.html#behind-the-scenes)
explaining how command output is formatted using the `table` command. I
was surprised that this section didn't mention the `display_output`
hook, so I took a look in the code and was shocked to discovered that
the documentation was correct, and the `table` command _is_
automatically applied to printed pipelines.
This auto-tabling has two ramifications for the `display_output` hook:
1. The `table` command is called on the output of a pipeline after the
`display_output` has run, even if `display_output` contains the table
command. This means each pipeline output is roughly equivalent to the
following (using `ls` as an example):
```nushell
ls | do $config.hooks.display_output | table
```
2. If `display_output` returns structured data, it will _still_ be
formatted through the table command.
This PR removes the auto-table when the `display_output` hook is set.
The auto-table made sense before `display_output` was introduced, but to
me, it now seems like unnecessary "automagic" which can be accomplished
using existing Nushell features.
This means that you can now pull back the curtain a bit, and replace
your `display_output` hook with an empty closure
(`$env.config.hooks.display_output = {||}`, setting it to null retains
the previous behavior) to see the values printed normally without the
table formatting. I think this is a good thing, and makes it easier to
understand Nushell fundamentals.
It is important to note that this PR does not change how `print` and
other commands (well, specifically only `watch`) print out values. They
continue to use `table` with no arguments, so changing your
config/`display_output` hook won't affect what `print`ing a value does.
Rel: [Discord
discussion](https://discord.com/channels/601130461678272522/615329862395101194/1307102690848931904)
(cc @dcarosone)
# User-Facing Changes
Pipelines are no longer automatically formatted using the `table`
command. Instead, the `display_output` hook is used to format pipeline
output. Most users should see no impact, as the default `display_output`
hook already uses the `table` command.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Will update mentioned docs page to call out `display_output` hook.
# Description
Bump `quick-xml` to `0.37.0`.
This came about rebasing `nushell` in Fedora, which now has `quick-xml`
0.36.
There is one breaking change in 0.33 as far as `nu-command` is
concerned, in that `Event::PI` is now a dedicated `BytesPI` type:
https://github.com/tafia/quick-xml/blob/master/Changelog.md#misc-changes-5
I've tested compiling and testing locally with `0.33.0`, `0.36.0` and
`0.37.0` - but let's future-proof by requiring `0.37.0`.
# User-Facing Changes
N/A
# Tests + Formatting
No additional tests required, existing tests pass
# After Submitting
N/A
Signed-off-by: Michel Lind <salimma@fedoraproject.org>
# Description
Closes: #14248
# User-Facing Changes
Added a `--default` flag to input command, and it also added an extra
output to prompt:
```
> let x = input -d 18 "input your age"
input your age (default: 18)
> $x
18
> let x = input -d 18
> $x
18
```
# Tests + Formatting
I don't think it's easy to add a test for it :-(
# Description
This PR updates the uutils/coreutils crates to the latest version. I
hard-coded debug to false, a new uu_mv parameter. It may be interesting
to add that but I just wanted to get all the uu crates on the same
version.
I had to update the tests because --no-clobber works but doesn't say
anything when it's not clobbering and previously we were checking for an
error message.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
Part of https://github.com/nushell/nushell/issues/11549
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR adds a `utouch` command that uses the `touch` command from
https://github.com/uutils/coreutils. Eventually, `utouch` may be able to
replace `touch`.
The conflicts in Cargo.lock and Cargo.toml are because I'm using the
uutils/coreutils main rather than the latest release, since the changes
that expose `uu_touch`'s internal functionality aren't available in the
latest release.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Users will have access to a new `utouch` command with the following
flags:
todo
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use std testing; testing run-tests --path
crates/nu-std"` to run the tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# User-Facing Changes
The parser now errors on more invalid command signatures:
```nushell
# expected parameter or flag
def foo [ bar: int: ] {}
# expected type
def foo [ bar: = ] {}
def foo [ bar: ] {}
# expected default value
def foo [ bar = ] {}
```
A more involved solution to the issue pointed out
[here](https://github.com/nushell/nushell/pull/14337#issuecomment-2480392373)
# Description
With `--to-table`
- cell-path groupers are used to create column names, similar to
`select`
- closure groupers result in columns named `closure_{i}` where `i` is
the index of argument, with regards to other closures i.e. first closure
grouper results in a column named `closure_0`
Previously
- `group-by foo {...} {...}` => `table<foo, group1, group2, items>`
- `group-by {...} foo {...}` => `table<group0, foo, group2, items>`
With this PR
- `group-by foo {...} {...}` => `table<foo, closure_0, closure_1,
items>`
- `group-by {...} foo {...}` => `table<closure_0, foo, closure_1,
items>`
- no grouper argument results in a `table<group, items>` as previously
On naming conflicts caused by cell-path groupers named `items` or
`closure_{i}`, an error is thrown, suggesting to use a closure in place
of a cell-path.
```nushell
❯ ls | rename items | group-by items --to-table
Error: × grouper arguments can't be named `items`
╭─[entry #3:1:29]
1 │ ls | rename items | group-by items --to-table
· ────────┬────────
· ╰── contains `items`
╰────
help: instead of a cell-path, try using a closure
```
And following the suggestion:
```nushell
❯ ls | rename items | group-by { get items } --to-table
╭─#──┬──────closure_0──────┬───────────────────────────items────────────────────────────╮
│ 0 │ CITATION.cff │ ╭─#─┬────items─────┬─type─┬─size──┬───modified───╮ │
│ │ │ │ 0 │ CITATION.cff │ file │ 812 B │ 3 months ago │ │
│ │ │ ╰─#─┴────items─────┴─type─┴─size──┴───modified───╯ │
│ 1 │ CODE_OF_CONDUCT.md │ ╭─#─┬───────items────────┬─type─┬──size───┬───modified───╮ │
...
```
# Description - fixes#14174
This PR addresses a bug in the `seq char` command where the command's
behavior did not align with its help description, which stated that it
prints a sequence of ASCII characters. The initial implementation only
allowed alphabetic characters, leading to user confusion when
non-alphabetic characters (e.g., digits, punctuation) were rejected or
when unexpected behavior occurred for certain input ranges.
### Changes Made:
- **Updated the input validation**: Modified the `is_single_character`
function to accept any ASCII character instead of restricting to
alphabetic characters.
- **Enhanced error messages**: Clarified error messages to specify that
any single ASCII character is acceptable.
- **Expanded functionality**: Ensured that the command can now generate
sequences that include non-alphabetic ASCII characters.
- **Updated tests**: Added tests to cover new use cases involving
non-alphabetic characters and improved validation.
### Examples After Fix:
- `seq char '0' '9'` now outputs `['0', '1', '2', '3', '4', '5', '6',
'7', '8', '9']`
- `seq char ' ' '/'` outputs a list of characters from space to `/`
- `seq char 'A' 'z'` correctly includes alphabetic and non-alphabetic
characters between `A` and `z`
# User-Facing Changes
- Users can now input any single ASCII character for the `start` and
`end` parameters of `seq char`.
- The output will accurately include all characters within the specified
ASCII range, including digits and punctuation.
# Tests + Formatting
- Added new tests to ensure the `seq char` command supports sequences
including non-alphabetic ASCII characters.
Trying to reduce lint allows either by checking if they are former false
positives or by fixing the underlying warning.
- **Remove dead `allow(dead_code)`**
- **Remove recursive dead code**
- **Remove dead code**
- **Move test only functions to test module**
The unit tests that use them, themselves are somewhat sus in that they
mock the usage and not test specificly used methods of the
implementation, so there is a risk for divergence
- **Remove `clippy::uninit_vec` allow.**
May have been a false positive, or the impl has changed somewhat.
We certainly want to look at the unsafe code here to vet for
correctness.
# Description
This PR tries to correct the problem of nushell scripts being made
executable on Windows systems. In order to do this, these steps need to
take place.
1. `assoc .nu=nuscript`
2. `ftype nuscript=C:\path\to\nu.exe '%1' %*`
3. modify the env var PATHEXT by appending `;.NU` at the end
Once those steps are done and this PR is landed, one should be able to
create a script such as this.
```nushell
❯ open im_exe.nu
def main [arg] {
print $"Hello ($arg)!"
}
```
Then they should be able to do this to run the nushell script.
```nushell
❯ im_exe Nushell
Hello Nushell!
```
Under-the-hood, nushell is shelling out to cmd.exe in order to run the
nushell script.
# User-Facing Changes
closes#13020
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Release Notes Excerpt
* Hooks now default to an empty value of the proper type (e.g., `[]` or
`{}`) when not otherwise specified
# Description
```nushell
# Start with no config
nu -n
# Populate with defaults
$env.config = {}
$env.config.hooks
```
* Before: All hooks other than `display_output` were set to `null`.
Attempting to append a hook using `++=` would fail unless it had already
been assigned.
* After:
* `pre_prompt`, `pre_execution`, and `command_not_found` are set to
empty lists. This allows the user to simply append new hooks using
`++=`.
* `env_change` is set to an empty record. This allows the user to add
new hooks using `merge`, although a "helper" command would still be
useful (TODO: stdlib).
Also fixed a typo in an error message.
# User-Facing Changes
There shouldn't be any breaking changes since (before) there were no
guarantees of the hook's value/type. Previously, users would have to
check for `null` and `default` to an empty list before appending. Any
user-strategies for dealing with the problem should continue to work
after this change.
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
Note that, for reasons I cannot ascertain, this PR appears to have
*fixed* the `command_not_found_error_recognizes_non_executable_file`
test that was previously broken by #12953. That PR essentially rewrote
the test to match the new behavior, but it no longer tested what it was
intended to test.
Now, the test is working again as designed (and as it works in the
REPL).
# After Submitting
This will be covered in the Configuration update for #14249. This PR
will simplify several examples in the doc.
# Description
Removes the `NU_DISABLE_IR` option and some code related to evaluating
blocks with the AST
evaluator.
Does not entirely remove the AST evaluator yet. We still have some
dependencies on expression
evaluation in a few minor places which will take a little bit of effort
to fix.
Also changes `debug profile` to always include instructions, because the
output is a little
confusing otherwise, and removes the different options for
instructions/exprs.
# User-Facing Changes
- `NU_DISABLE_IR` no longer has any effect, and is removed. There is no
way to use the AST
evaluator.
- `debug profile` no longer has `--exprs`, `--instructions` options.
- `debug profile` lists `pc` and `instruction` columns by default now.
# Tests + Formatting
Eval tests fixed to only use IR.
# After Submitting
- [ ] release notes
- [ ] finish removing AST evaluator, come up with solutions for the
expression evaluation.
Fixes#14265
# User-Facing Changes
`ls` without a path argument now errors when the current working
directory is unreadable due to missing permissions:
```diff
mkdir foo
chmod 100 foo
cd foo
ls | to nuon
-[]
+Error: × Permission denied
```
Fixes#13267
As we can see from the bisect done in the comments.
Bisected to https://github.com/nushell/nushell/pull/12625 /
460a1c8f87
We can see that this update brought the use of `read_dir` and for it, it
is mentioned in the [rust
docs](https://doc.rust-lang.org/std/fs/fn.read_dir.html#platform-specific-behavior)
that it does **not** provide any specific order of files.
As was the advice there, I went and applied a manual `sort` to the
entries and tested it manually on my local machine.
If required I could probably try and add tests for the order
consistency, would need some time to find my way around them, so I'm
sending the PR first.
@sholderbach suggested that we need to have a test for a function can't
use mutable variable.
https://github.com/nushell/nushell/pull/14311#issuecomment-2470035194
So this pr is going to add a case for it.
---------
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Bump version to `0.100.0`
# User-Facing Changes
The new release `v0.100.0` is coming...
# Description
In #14291, I misunderstood the use-case for `into binary` with `http
post`. Thanks again to @weirdan for steering me straight on that. This
reverts the example that I changed and adds a new one for uploading text
files.
# User-Facing Changes
Doc-only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Fixes test which was ignored in #14297. Also fixes related example.
Tests now use local timezone to match actual result.
More discussion in #14266
# User-Facing Changes
Tests-only
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
# Description
Since the human-date-parser was switched to use the users local
timezone, this test may not be needed anymore. I've just ignored it for
now and put a comment about why it's being ignored.
There are more discussions on this topic here
https://github.com/nushell/nushell/pull/14266
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Thanks to @weirdan [in
Discord](https://discord.com/channels/601130461678272522/614593951969574961/1304508148207583345)
for pointing out that correct syntax for `http post --content-type
multipart/form-data`.
The existing example was incomplete, so I've updated it.
# User-Facing Changes
Doc-only
# Tests + Formatting
`toolkit test` currently seems to be broken, so relying on CI
# After Submitting
N/A
# Description
Fixes: #14110Fixes: #14087
I think it's ok to not generating instruction to `def` and `export def`
call. Because they just return `PipelineData::Empty` without doing
anything.
If nushell generates instructions for `def` and `export def`, nushell
will try to capture variables for these block. It's not the time to do
this.
# User-Facing Changes
```
nu -c "
def bar [] {
let x = 1
($x | foo)
}
def foo [] {
foo
}
"
```
Will no longer raise error.
# Tests + Formatting
Added 4 tests
Addresses the following points from #14162
> - There is no built-in counterpart to url build-query for splitting a
query string
There is `from url`, which, due to naming, is a little hard to discover
and suffers from the following point
> - url parse can create records with duplicate keys
> - url parse's params should either:
> - ~group the same keys into a list.~
> - instead of a record, be a key-value table. (table<key: string,
value: string>)
# Description
## `url split-query`
Counterpart to `url build-query`, splits a url encoded query string to
key value pairs, represented as `table<key: string, value: string>`
```
> "a=one&a=two&b=three" | url split-query
╭───┬─────┬───────╮
│ # │ key │ value │
├───┼─────┼───────┤
│ 0 │ a │ one │
│ 1 │ a │ two │
│ 2 │ b │ three │
╰───┴─────┴───────╯
```
## `url parse`
The output's `param` field is now a table as well, mirroring the new
`url split-query`
```
> 'http://localhost?a=one&a=two&b=three' | url parse
╭──────────┬─────────────────────╮
│ scheme │ http │
│ username │ │
│ password │ │
│ host │ localhost │
│ port │ │
│ path │ / │
│ query │ a=one&a=two&b=three │
│ fragment │ │
│ │ ╭───┬─────┬───────╮ │
│ params │ │ # │ key │ value │ │
│ │ ├───┼─────┼───────┤ │
│ │ │ 0 │ a │ one │ │
│ │ │ 1 │ a │ two │ │
│ │ │ 2 │ b │ three │ │
│ │ ╰───┴─────┴───────╯ │
╰──────────┴─────────────────────╯
```
# User-Facing Changes
- `url parse`'s output has the mentioned change, which is backwards
incompatible.
# Description
This PR tries to fix https://github.com/nushell/nushell/issues/14195 by
setting the local time and timezone after conversion without changing
the time.
### Before
```nushell
❯ 'in 10 minutes' | into datetime
Tue, 5 Nov 2024 12:59:58 -0600 (in 9 minutes)
❯ 'yesterday' | into datetime
Sun, 3 Nov 2024 18:00:00 -0600 (2 days ago)
❯ 'tomorrow' | into datetime
Tue, 5 Nov 2024 18:00:00 -0600 (in 5 hours)
❯ 'today' | into datetime
Mon, 4 Nov 2024 18:00:00 -0600 (18 hours ago)
```
### After (these are correct)
```nushell
❯ 'in 10 minutes' | into datetime
Tue, 5 Nov 2024 12:58:44 -0600 (in 9 minutes)
❯ 'yesterday' | into datetime
Mon, 4 Nov 2024 12:49:04 -0600 (a day ago)
❯ 'tomorrow' | into datetime
Wed, 6 Nov 2024 12:49:20 -0600 (in a day)
❯ 'today' | into datetime
Tue, 5 Nov 2024 12:52:06 -0600 (now)
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
# Description
Fixes#14151 where `to text` treats list streams and lists values
differently.
# User-Facing Changes
New line is always added after items in a list or record except for the
last item if the `--no-newline` flag is provided.
# Description
Turns out there are duplicate conversion functions: `as_i64` and
`as_f64`. In most cases, these can be replaced with `as_int` and
`as_float`, respectively.
# Description
Fixes: https://github.com/nushell/nushell/issues/13425
It's just a follow up to #13958.
User input can be a directory, in this case, we need to use the return
value of `find_in_dirs_env` carefully, so in case, I renamed
maybe_file_path to maybe_file_path_or_dir to emphasize it.
# User-Facing Changes
`$env.FILE_PWD` and `$env.CURRENT_FILE` will be more reliable to use.
# Tests + Formatting
Added 2 tests
# Description
Dividing two ints can currently return either an int or a float. Not
having a single return type for an operation between two types seems
problematic. Additionally, the type signature for division says that
dividing two ints returns only an int which does not match the current
implementation (it can also return a float). This PR changes division
between almost all types to return a float (except for `filesize /
number` or `duration / number`, since there are no float representations
for these types).
Currently, floor division between certain types is not implemented even
though the type signature allows it. Also, the current implementation of
floor division uses a combination of clamping and flooring rather than
simply performing floor division which this PR fixes. Additionally, the
signature was changed so that `int // float`, `float // int`, and `float
// float` now return float instead of int. This matches the automatic
float promotion in the rest of the operators (as well as how Python does
floor division which I think is the original inspiration).
Since regular division has always returned fractional values (and now
returns a float to reflect that), `mod` is now defined in terms of floor
division. That is, `D // d = q`, `D mod d = r`, and `D = d * q + r `.
This is just like the `%` operator in Python, which is also based off
floor division (at least for ints and floats). Additionally,
implementations missing from `mod`'s current type signature have been
added (`duration mod int` and `duration mod float`).
This PR also overhauls the overflow checking and errors for div, mod,
and floor div. If an operation overflows, it will now cause an error.
# User-Facing Changes
- Div now returns a float in most cases.
- Floor division now actually does floor division.
- Floor division now does automatic float promotion, returning a float
in more instances.
- Floor division now actually allows division with filesize and
durations as its type signature claimed.
- Mod is now defined and implemented in terms of floor division rather
than truncating division.
- Mod now actually allows filesize and durations as its type signature
claimed.
- Div, mod, and floor div now all have proper overflow checks.
## Examples
When the divisor and the dividend have the same sign, the quotient and
remainder will be the same as before. (Except that this PR will give
more accurate results, since it does not do an intermediate float
conversion). If the signs of the divisor and dividend are different,
then the results will be different, or rather actually correct.
Before:
```nu
let q = 8 // -3 # -3
let r = 8 mod -3 # 2
8 == $q * -3 + $r # false
```
After:
```nu
let q = 8 // -3 # -3
let r = 8 mod -3 # -1
8 == $q * -3 + $r # true
```
Before:
```nu
let q = -8 // 3 # -3
let r = -8 mod 3 # -2
-8 == $q * 3 + $r # false
```
After:
```nu
let q = -8 // 3 # -3
let r = -8 mod 3 # 1
-8 == $q * 3 + $r # true
```
# Tests + Formatting
Added a few tests.
# After Submitting
Probably update the docs.
Fixes#14145
# User-Facing Changes
An empty rest match would be `null` previously. Now it will be an empty
list.
This is a breaking change for any scripts relying on the old behavior.
Example script:
```nu
match [1] {
[_ ..$rest] => {
match $rest {
null => { "old" }
[] => { "new" }
}
}
}
```
This expression would evaluate to "old" on current nu versions and "new"
with this patch.
# Description
Fixes#14222. The ability to set duration unit for `--max-time` when using the `http`
command util.
Signed-off-by: Alex Johnson <alex.kattathra.johnson@gmail.com>
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Adds --no-deref flag to `touch`. Nice and backwards compatible, and I
get to touch symlinks. I still don't get to set their dates directly,
but maybe that'll come with utouch.
Some sadness in the implementation, since `set_symlink_file_times`
doesn't take Option values and we call it twice with the old "read"
values from reference (or now, if missing). This shouldn't be a big
concern since `touch` already did two calls if you set both mtime and
atime. Also, `--no-deref` applies both to the reference file, and to the
target file. No splitting them up, because that's silly.
Can always bikeshed. I nicked `--no-deref` from the uutils flag, and
made the short flag `-d` because it obviously can't be `-h`. I thought
of `-S` like in `glob`, for the "negative/filter out" uppercase short
letters. Ultimately I don't think it matters much.
Should fix#14212 since it's not really tied to uutils, besides the
comment about setting a `datetime` value directly.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
New flag.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
Maybe.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
Fixes: #13362
This PR fixes the `Display` impl for `CellPath`, as laid out in #13362
and #14090:
```nushell
> $.0."0"
$.0."0"
> $."foo.bar".baz
$."foo.bar".baz
```
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
Cell-paths are now printed using the same `$.` notation that is used to
create them, and ambiguous column names are properly quoted.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
verb 'setup' -> 'set up'
setup as verb [is a misspelling of set
up](https://en.wiktionary.org/wiki/setup#Verb)
* [verb: set up](https://en.wiktionary.org/wiki/set_up)
* [noun: setup](https://en.wiktionary.org/wiki/setup)
*I split this from #14229 typo corrections because 'setup' is not as
clear-cut wrong. Having read the dictionary pages (linked) I'm even more
confident in this change being correct rather than only subjectively
better.*
Co-authored-by: Stefan Holderbach <sholderbach@users.noreply.github.com>
# Description
A few simple changes:
* Extends the range of previews to include the attributes - Bold,
italic, underline, etc.
* Also resets the colors before *every* preview. Previously we weren't
doing this, so the "string" theme color was bleeding into a few previews
(mostly, if not all, `bg` ones). Now the "default foreground" color is
used for any preview without an explicit foreground color.
* Moves the preview code into the `if use_ansi_coloring` block as a
stupid-nitpick optimization. There's no reason to populate the previews
when they are explicitly not shown with `use_ansi_coloring: false`.
* Moves `reset` to the bottom of the attribute list so that it isn't
previewed. This is a bit of a nitpick as well since internally we send
the same code for both a `reset` and `attr_normal` (which is correct),
but semantically a `reset` doesn't seem like a "previewable" thing,
whereas "normal" text can be demonstrated with a preview.
# User-Facing Changes
`ansi -l` now shows additional previews
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
N/A
<!--
if this PR closes one or more issues, you can automatically link the PR
with
them by using one of the [*linking
keywords*](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword),
e.g.
- this PR should close #xxxx
- fixes #xxxx
you can also mention related issues, PRs or discussions!
-->
# Description
<!--
Thank you for improving Nushell. Please, check our [contributing
guide](../CONTRIBUTING.md) and talk to the core team before making major
changes.
Description of your pull request goes here. **Provide examples and/or
screenshots** if your changes affect the user experience.
-->
This PR makes the `Display` implementation for `CellPath` show a `?`
suffix on every optional entry, which makes the output consistent with
the language syntax.
Before this PR, the printing of cell paths was confusing, e.g. `$.x` and
`$.x?` were both printed as `x`. Now, the second one is printed as `x?`.
# User-Facing Changes
<!-- List of all changes that impact the user experience here. This
helps us keep track of breaking changes. -->
The formatting of cell paths now matches the syntax used to create them,
reducing confusion.
# Tests + Formatting
<!--
Don't forget to add tests that cover your changes.
Make sure you've run and fixed any issues with these commands:
- `cargo fmt --all -- --check` to check standard code formatting (`cargo
fmt --all` applies these changes)
- `cargo clippy --workspace -- -D warnings -D clippy::unwrap_used` to
check that you're using the standard code style
- `cargo test --workspace` to check that all tests pass (on Windows make
sure to [enable developer
mode](https://learn.microsoft.com/en-us/windows/apps/get-started/developer-mode-features-and-debugging))
- `cargo run -- -c "use toolkit.nu; toolkit test stdlib"` to run the
tests for the standard library
> **Note**
> from `nushell` you can also use the `toolkit` as follows
> ```bash
> use toolkit.nu # or use an `env_change` hook to activate it
automatically
> toolkit check pr
> ```
-->
All tests pass, including `stdlib` tests.
# After Submitting
<!-- If your PR had any user-facing changes, update [the
documentation](https://github.com/nushell/nushell.github.io) after the
PR is merged, if necessary. This will help us keep the docs up to date.
-->
Related to #14181
# Description
Our understanding of `ESC[3J` has apparently been wrong. And I say "our"
because I posted a [Super User
answer](https://superuser.com/a/1738611/1210833) a couple of years ago
with the same misconception (now fixed). In addition, the [crossterm
crate
doc](https://docs.rs/crossterm/latest/crossterm/terminal/enum.ClearType.html)
is wrong on the topic.
`ESC[3J` doesn't clear the screen plus the scrollback; it *only* clears
the scrollback. Reference the official [Xterm Control Sequences
doc](https://www.xfree86.org/4.8.0/ctlseqs.html).
> CSI P s J
>
> Erase in Display (ED)
>
> P s = 0 → Erase Below (default)
> P s = 1 → Erase Above
> P s = 2 → Erase All
> P s = 3 → Erase Saved Lines (xterm)
This also means that:
```nu
$"(ansi clear_entire_screen_plus_buffer)"
```
... doesn't.
This PR updates it to `ansi clear_scrollback_buffer` (short-code remains
the same).
# User-Facing Changes
Breaking-change: `ansi clear_entire_screen_plus_buffer` is renamed `ansi
clear_scrollback_buffer`
# Tests + Formatting
- 🟢 `toolkit fmt`
- 🟢 `toolkit clippy`
- 🟢 `toolkit test`
- 🟢 `toolkit test stdlib`
# After Submitting
Self-documenting command via `ansi -l`
# Description
Makes `join` `right-table` support table literal notation instead of
parsing the column list (treated as empty data):
```diff
[{a: 1}] | join [[a]; [1]] a | to nuon
-[]
+[[a]; [1]]
```
Fixes#13537, fixes#14134
Addresses one of the points in #14162
# Description
Factors out part of the `url::build_query::to_url` function into a
separate function `url::query::record_to_qs()`, which is then used in
both `url::build_query` and `url::join`.
# User-Facing Changes
Like with `url build-query` (after #14073), `url join` will allow list
values in `params` and behavior of two commands will be same.
```nushell
> {a: ["one", "two"], b: "three"} | url build-query
"a=one&a=two&b=three"
> {scheme: "http", host: "host", params: {a: ["one", "two"], b: "three"}} | url join
"http://host?a=one&a=two&b=three"
```
# Tests + Formatting
Added an example to `url join` for the new behavior.
