Some environment variables didn’t behave like their corresponding
command line flags. The affected flags were --stats, --log-level,
--separator, --multi-tread-streams, --rc-addr, --rc-user and --rc-pass.
Example:
RCLONE_STATS='10s'
rclone check remote: remote: --progress
# Expected: rclone check remote: remote: --progress –-stats=10s
# Actual: rclone check remote: remote: --progress
Remote specific options set by environment variables was overruled by
less specific backend options set by environment variables. Example:
RCLONE_DRIVE_USE_TRASH='false'
RCLONE_CONFIG_MYDRIVE_USE_TRASH='true'
rclone deletefile myDrive:my-test-file
# Expected: my-test-file is recoverable in the trash folder
# Actual: my-test-file is permanently deleted (not recoverable)
Backend specific options set by environment variables was overruled by
general backend options set by environment variables. Example:
RCLONE_SKIP_LINKS='true'
RCLONE_LOCAL_SKIP_LINKS='false'
rclone lsd local:
# Expected result: Warnings when symlinks are skipped
# Actual result: No warnings when symlinks are skipped
# That is RCLONE_SKIP_LINKS takes precedence
The above issues have been fixed.
The debug logging (-vv) has been enhanced to show when flags are set by
environment variables.
The documentation has been enhanced with details on the precedence of
configuration options.
See pull request #5341 for more information.
- Unify all hash names as lowercase alphanumerics without punctuation.
- Legacy names continue to work but disappear from docs, they can be depreciated or dropped later.
- Make rclone hashsum print supported hash list in case of wrong spelling.
- Update documentation.
Fixes#5071Fixes#4841
This also factors the config questions into a state based mechanism so
a backend can be configured using the same dialog as rclone config but
remotely.
This is a very large change which turns the post Config function in
backends into a state based call and response system so that
alternative user interfaces can be added.
The existing config logic has been converted, but it is quite
complicated and folloup commits will likely be needed to fix it!
Follow up commits will add a command line and API based way of using
this configuration system.
Includes adding support for additional size input suffix Mi and MiB, treated equivalent to M.
Extends binary suffix output with letter i, e.g. Ki and Mi.
Centralizes creation of bit/byte unit strings.
Restructuring of config code in v1.55 resulted in config
file being loaded early at process startup. If configuration
file is encrypted this means user will need to supply the password,
even when running commands that does not use config.
This also lead to an issue where mount with --deamon failed to
decrypt the config file when it had to prompt user for passord.
Fixes#5236Fixes#5228
A new command `rclone config touch` which calls config.SaveConfig().
Useful during testing of configuration location things.
It will ensure the config file exists and test that it is writable.
Before this patch selfupdate detected ANY build with cmount tag as a build
having libFUSE capabilities. However, only dynamic builds really have it.
The official linux builds are static and have the cmount tag as of the time
of this writing. This results in inability to update official linux binaries.
This patch fixes that. The build can be fixed independently.
This patch modifies the output of `rclone version`.
The `os/arch` line is split into `os/type` and `os/arch`.
The `go version` line is now tagged as `go/version` for consistency.
Additionally the `go/linking` line tells whether the rclone
was linked as a static or dynamic executable.
The new `go/tags` line shows a space separated list of build tags.
The info about linking and build tags is also added to the output
of the `core/version` RC endpoint.
It was discovered `rclone mount` (but not `rclone cmount`) cached
directories after rename which it shouldn't have done.
This caused IO errors when trying to access files in renamed
directories on bucket based file systems.
This turned out to be the kernel caching the directories as basil/fuse
sets their expiry time to 60s for some reason.
This fix invalidates the relevant kernel cache entries in the for the
directories which fixes the problem.
Fixes: #4977
See: https://forum.rclone.org/t/after-a-directory-renmane-using-mv-files-are-not-visible-any-longer/22797
If you are using rclone a library you can decide to use the rclone
config file system or not by calling
configfile.LoadConfig(ctx)
If you don't you will need to set `config.Data` to an implementation
of `config.Storage`.
Other changes
- change interface of config.FileGet to remove unused default
- remove MustValue from config.Storage interface
- change GetValue to return string or bool like elsewhere in rclone
- implement a default config file system which panics with helpful error
- implement getWithDefault to replace the removed MustValue
- don't embed goconfig.ConfigFile so we can change the methods
Previously rclone set --daemon-timeout to 15m by default. However
osxfuse seems to be ignoring that value since it is above the maximum
value of 10m. This is conjecture since the source of osxfuse is no
longer available.
Setting the value to 10m seems to resolve the problem.
See: https://forum.rclone.org/t/rclone-mount-frequently-drops-when-using-plex/22352
This adds
-o modules=iconv,from_code=UTF-8,to_code=UTF-8-MAC
To the mount options if it isn't already present which fixes mounting
issues on macOS with accented characters in the finder.
Before this change, if one connection was authenticating this would
block any others from authenticating.
This was due to ssh.NewServerConn not being called in a go routine
after the Accept call.
This is fixed by running the ssh authentication in a go routine.
Thanks to @FiloSottile for advice on how to fix this.
See: https://github.com/golang/go/issues/43521
Implemented empty folder flag for ncdu browser interface. If there is
empty folder in the list the flag e is prepended before size. If there
is no empty folder this flag is ommited. It has the same behaviour as
original ncdu browser. (https://dev.yorhel.nl/ncdu/man)
When a directory cannot be walk-ed because of a permissions error
- or any error for that matter -, ncdu mode keeps track of the error
and highlights directories that could not be read.
Previously, the error would cause ncdu to abort.
Now, directories with unreadable sub-directories are displayed in yellow and
a message warns that the total may be underestimated.
Unreadable directories themselves are displayed in red along with the error message
Add --network-mode option to activate mounting as network drive without having to set volume prefix.
Add support for automatic drive letter assignment (not specific to network drive mounting).
Allow full network share unc path in --volname, which will also implicitely activate network drive mounting.
Allow full network share unc path as mountpoint, which will also implicitely activate network drive mounting, and the specified path will be used as volume prefix and the remote will be mounted on an automatically assigned drive letter instead.
This commit modifies the operations.hashSum function by adding an alternate code path. This code path is triggered by passing downloadFlag = True. When activated, rclone will download files from the remote and hash them locally. downloadFlag = False preserves the existing behavior of using the remote to retrieve the hash.
This commit modifies HashLister to support the new hashSum method as well as consolidating the roles of HashLister, HashListerBase64, Md5sum, and Sha1sum. The printing of hashes from the function defined in HashLister has been revised to work with --progress. There are light changes to operations.syncFprintf and cmd.startProgress for this.
The unit test operations_test.TestHashSums is modified to support this change and test the download functionality.
The command functions hashsum, md5sum, sha1sum, and dbhashsum are modified to support this change. A download flag has been added and an output-file flag has been added. The output-file flag writes hashes to a file instead of stdout to avoid the need to redirect stdout.
When using `--baseurl` before this patch, if a request was made to the
base URL without a trailing / then rclone would return a 404 error.
Unfortunately GVFS / Nautilus makes the request without the /
regardless of what the user put in.
This patch redirects the request to the base URL with a /. So if the
user was using `--baseurl rclone` then a request to
http://localhost/rclone would be redirected with a 308 response to
http://localhost/rclone/Fixes#4814
Before this change cgofuse and libatexit would race to see who could
unmount the file system with unpredicatable results. On Linux it could
report an error or not, depending.
This change checks to see if umount is beng called from a signal and
if so leaves the unmounting to cgofuse/libfuse.
See #4804
Create a full loop of documentation for rclone about, backends overview
and individual backend pages.
Discussion:
https://github.com/rclone/rclone/pull/4774 relates
Previously pull was requested, in part, under ref
https://github.com/rclone/rclone/pull/4801
Notes:
Introduce a tentative draft see-link format the end of sections to try
rather than lots of in-para links.
Update about.go incl link to list of backends not supporting about.
In list of backends not supporting about, include link to about command
reference.
I appreciate there may be decisions to make going forward about whether
command links should be code formatted, and using proper pretty url
links, but I have fudged that for now.
Update backend pages that do not support about with wording used
previously for ftp - it is in passive voice but I can live with it. (my
own wording and fault). The note is applied to a limitations section. If
one does not already exist it is created (even if there are other
limitations with their own sections)
