Commit Graph

74 Commits

Author SHA1 Message Date
Anuar Serdaliyev
f14871caf7
accounting: Correct exitcode on Transfer Limit Exceeded flag. Fixes #3203
Before this change the exit code for transfer limit exceeded was
incorrect. This was because the `resolveExitCode` function unwraps the
error thus reading the underlying error which is not the same as the
error it was comparing to (`ErrorMaxTransferLimitReached`).

This change fixes it by splitting the error definition in two so that
when the Fatal error is unwrapped we match against
`ErrorMaxTransferLimitReached` however when we return the error we
return `ErrorMaxTransferLimitReachedFatal`.
2020-03-10 12:00:10 +00:00
Gary Kim
38a4d50e73 rcd: Add Prometheus metrics support - fixes #3858
Signed-off-by: Gary Kim <gary@garykim.dev>
2020-03-01 09:58:34 +00:00
Franklyn Tackitt
2b3d13a841 fs: Use --cutoff-mode hard,soft,catious instead of 3 --max-transfer-mode flags
Fixes #2672
2020-03-01 09:49:55 +00:00
Shing Kit Chan
6f1766dd9e fs: Add support for --max-transfer-cutoff modes #2672
This also adds max transfer cut off check for server side copies too
2020-03-01 09:49:55 +00:00
Michał Matczuk
964f1f6a7e fs/accounting: Restore "Max number of stats groups reached" log line
Changed log level to debug.
2020-02-12 21:21:25 +00:00
Gary Kim
e71edd5577 cmd: always print elapsed time to tenth place seconds in progress
Before this change, the elapsed time shown with the --progress flag
would not print ".0s" so the elapsed time.

This change will make it so that the line width is kept a bit more
consistent by always printing to a fixed-point.

This does change the displayed value when the elapsed time
is less than 1s, in which it used to be that the value would be shown
in ms or smaller units.

Signed-off-by: Gary Kim <gary@garykim.dev>
2020-01-29 12:28:01 +00:00
Michał Matczuk
eb10ac346f fs/accounting: Added StatsInfo locking in statsGroups sum function (#3844)
Without the fix we can have a race, example:

```
Write at 0x00c000432039 by goroutine 187:
  github.com/rclone/rclone/fs/accounting.(*StatsInfo).Error()
      fs/accounting/stats.go:495 +0x3f1
  github.com/rclone/rclone/fs/accounting.(*StatsInfo).Error-fm()
      fs/accounting/stats.go:477 +0x55
  github.com/rclone/rclone/fs/walk.listRwalk.func1()
      fs/walk/walk.go:162 +0xd2
  github.com/rclone/rclone/fs/walk.walk.func2()
      fs/walk/walk.go:402 +0x30f

Previous read at 0x00c000432039 by goroutine 184:
  github.com/rclone/rclone/fs/accounting.(*statsGroups).sum()
      fs/accounting/stats_groups.go:351 +0xcae
  github.com/rclone/rclone/fs/accounting.rcTransferredStats()
      fs/accounting/stats_groups.go:132 +0x1f4
```

Fixes #3844
2020-01-04 16:45:24 +00:00
Aleksandar Jankovic
b9fb313f71 fs/accounting: add option to delete stats
Removed PruneAllTransfers because it had no use. startedTransfers are
set to nil in ResetCounters.
2020-01-03 17:44:05 +00:00
Aleksandar Jankovic
0e64df4b4c fs/accounting: consistency cleanup 2020-01-03 17:44:05 +00:00
Cnly
59c75ba442 accounting: fix error count shown as checks - fixes #3814 2019-12-23 03:03:19 +08:00
anuar45
7e602dbf39 stats: show deletes in stats and hide zero stats
This shows deletes in the stats.  It also doesn't show zero stats
in order not to make the stats block too long.
2019-11-21 11:15:47 +00:00
Nick Craig-Wood
e0eeeaafcd accounting: don't show entries in both transferring and checking
See: https://forum.rclone.org/t/showing-progress-checking/12958
2019-11-19 13:22:33 +00:00
Nick Craig-Wood
d46f8d0ae5 accounting: fix memory leak on retries operations
Before this change if an operation was retried on operations.Copy and
the operation was large enough to use an async buffer then an async
buffer was leaked on the retry.  This leaked memory, a file handle and
a go routine.

After this change if Account.WithBuffer is called and there is already
a buffer, then a new one won't be allocated.
2019-11-19 12:11:59 +00:00
Maciej Zimnoch
f5443ac939 accounting: clear finished transfer in stats-reset
In order to reduce memory usage `stats-reset` also
clears finished transfers.

Fixes #3734
2019-11-18 14:25:32 +00:00
Maciej Zimnoch
7cf056b2c2 accounting: allow MaxCompletedTransfers to be configurable
rclone library users might be intrested in changing default value to
other, or even disabling it. With current version it's impossible which
leads to races when number of uploaded objects exceeds default limit.

Fixes #3732
2019-11-18 14:25:32 +00:00
Ankur Gupta
75a6c49f87 Fix error counter - fixes #3650
For few commands, RClone counts a error multiple times. This was fixed by
creating a new error type which keeps a flag to remember if the error has
already been counted or not. The CountError function now wraps the original
error eith the above new error type and returns it.
2019-11-18 14:13:02 +00:00
Chaitanya
e0356f5aae rcd: Adding group parameter to stats 2019-10-29 16:39:37 +00:00
Nick Craig-Wood
1868c77e16 rc: fix formatting of docs 2019-10-27 10:43:40 +00:00
Nick Craig-Wood
13e46c4b3f accounting: cull the old time ranges when possible to save memory 2019-10-17 11:43:32 +01:00
Nick Craig-Wood
d40972bf1a accounting: allow up to 100 completed transfers in the accounting list
This fixes the core/transfers rc so it shows items again.
2019-10-16 22:13:17 +01:00
Nick Craig-Wood
b002ff8d54 accounting: fix total duration calculation
This was broken in e337cae0c5 when we deleted the transfers
immediately.

This is fixed by keeping a merged slice of time ranges of completed
transfers and adding those to the current transfers.
2019-10-16 22:13:17 +01:00
Nick Craig-Wood
e337cae0c5 accounting: fix memory leak noticeable for transfers of large numbers of objects
Before this fix we weren't removing transfers from the transfer stats.
For transfers with 1000s of objects this uses a noticeable amount of
memory.

See: https://forum.rclone.org/t/rclone-memory-consumption-increasing-linearly/12244
2019-10-16 10:27:07 +01:00
Chaitanya
b63e9befe8 rc docs: fix code section not rendering properly due to missing quotes 2019-10-13 12:26:37 +01:00
Ivan Andreev
d98d1be3fe accounting: fix panic due to server-side copy fallback 2019-09-24 12:45:12 +01:00
Nick Craig-Wood
56544bb2fd accounting: fix file handle leak on errors - fixes #3547
In 53a1a0e3ef we introduced a problem where if there was an
error on the file being transferred then the file was re-opened and
the old one wasn't closed.

This was partially fixed in bfbddab46b however this didn't
address the case of the old file being closed.

This is now fixed by
- marking the file as open again in UpdateReader
- moving the stopping the accounting machinery to a new method Done
2019-09-19 16:20:07 +01:00
Nick Craig-Wood
bfbddab46b fs/accounting: Fix "file already closed" on transfer retries
This was caused by the recent reworking of the accounting interface.
The Transfer object was recycling the Accounting object without
resetting the stream.

See: https://forum.rclone.org/t/error-file-already-closed/11469/
See: https://forum.rclone.org/t/rclone-b2-sync-post-error-method-not-supported/11718/
2019-09-13 18:35:02 +01:00
Aleksandar Jankovic
934440a9df accounting: fix total duration calculation
Fixes: #3498
2019-09-12 10:29:40 +01:00
Nick Craig-Wood
cf9b973fe4 accounting: fix locking in Transfer to avoid deadlock with --progress
Before this change, using -P occasionally deadlocked on the Transfer
mutex when Transfer.Done() was called with a non nil error and the
StatsInfo mutex since they mutually call each other.

This was fixed by making sure that the Transfer mutex is always
released before calling any StatsInfo methods.

This improves on: 6f87267b34

Fixes #3505
2019-09-06 10:00:44 +01:00
Nick Craig-Wood
ffa1dac10b build: apply gofmt from go1.13 to change case of number literals 2019-09-05 13:59:06 +01:00
Nick Craig-Wood
50a4ed8fc4 operations: fix accounting for server side copies
See: https://forum.rclone.org/t/b2-server-side-copy-doesnt-show-cumulative-progress/11154
2019-09-02 09:26:33 +01:00
Nick Craig-Wood
6f87267b34 accounting: fix locking in Transfer to avoid deadlock with --progress
Before this change, using -P occasionally deadlocked on the transfer
mutex and the stats mutex since they call each other via the progress
printing.

This is fixed by shortening the locking windows and converting the
mutex to a RW mutex.
2019-08-08 15:46:46 +01:00
Aleksandar Jankovic
6a3e301303 accounting: add call to clear stats
- Make calls more consistent by changing path to kebab case.
- Add stacktrace information to job panics
2019-08-02 16:56:19 +01:00
Nick Craig-Wood
57d5de6fba build: fix up package paths after repo move
git grep -l github.com/ncw/rclone | xargs -d'\n' perl -i~ -lpe 's|github.com/ncw/rclone|github.com/rclone/rclone|g'
goimports -w `find . -name \*.go`
2019-07-28 18:47:38 +01:00
Aleksandar Jankovic
4ba6532915 accounting: make stats response consistent
core/stats can return two different schemas in 'transferring' field.
One is object with fields the other is just plain string.
This is confusing, unnecessary and makes defining response schema
more difficult. It also returns `lastError` as value which can be
rendered differently depending on source of error.

This change standardizes 'transferring' filed to always return
object but with reduced fields if they are not available.
Former string item is converted to {name:remote_name} object.

'lastError' is forced to be a string as in some cases it can be encoded
as an object.
2019-07-28 14:48:19 +01:00
Aleksandar Jankovic
ff235e4e56 docs: update documentation for stats 2019-07-28 14:48:19 +01:00
Aleksandar Jankovic
68e641f6cf accounting: add limits and listing to stats groups 2019-07-28 14:48:19 +01:00
Aleksandar Jankovic
53a1a0e3ef accounting: add reference to completed transfers
Add core/transferred call that lists completed transfers and their
status.
2019-07-28 14:48:19 +01:00
Aleksandar Jankovic
8243ff8bc8 accounting: isolate stats to groups
Introduce stats groups that will isolate accounting for logically
different transferring operations. That way multiple accounting
operations can be done in parallel without interfering with each other
stats.

Using groups is optional. There is dedicated global stats that will be
used by default if no group is specified. This is operating mode for CLI
usage which is just fire and forget operation.

For running rclone as rc http server each request will create it's own
group. Also there is an option to specify your own group.
2019-07-28 14:48:19 +01:00
Aleksandar Jankovic
be0464f5f1 accounting: change stats interface
This is done to make clear ownership over accounting object and prepare
for removing global stats object.

Stats elapsed time calculation has been altered to account for actual
transfer time instead of stats creation time.
2019-07-28 14:48:19 +01:00
AbelThar
70c6b01f54 fs: Higher units for ETA - fixes #3221 2019-07-01 12:09:19 +01:00
Nick Craig-Wood
276f8cccf6 rc: return current settings if core/bwlimit called without parameters 2019-06-24 13:22:24 +01:00
Aleksandar Jankovic
f78cd1e043 Add context propagation to rclone
- Change rclone/fs interfaces to accept context.Context
- Update interface implementations to use context.Context
- Change top level usage to propagate context to lover level functions

Context propagation is needed for stopping transfers and passing other
request-scoped values.
2019-06-19 11:59:46 +01:00
Nick Craig-Wood
822483aac5 accounting: enable accounting without passing through the stream #2252
This is in preparation for multithreaded downloads
2019-05-11 23:35:19 +01:00
Peter Berbec
0d511b7878 cmd: implement --stats-one-line-date and --stats-one-line-date-format 2019-05-11 17:39:57 +01:00
Fabian Möller
48c09608ea
fix spelling 2019-04-30 14:12:18 +02:00
Nick Craig-Wood
2065e73d0b cmd: implement RetryAfter errors which cause a sleep before a retry
Use NewRetryAfterError to return an error which will cause a high
level retry after the delay specified.
2019-03-25 13:41:34 +00:00
Nick Craig-Wood
240c15883f accounting: fix total ETA when --stats-unit bits is in effect 2019-02-14 07:56:52 +00:00
Nick Craig-Wood
5990573ccd accounting: fix layout of stats - fixes #2910
This fixes several things wrong with the layout of the stats.

Transfers which haven't started are printed in the same format as
those which have so the stats with `--progress` don't show horrible
artifacts.

Checkers and transfers now get a ": checkers" and ": transfers" label
on the end of the stats line.  Transfers will have the transfer stats
when the transfer has started instead of this.

There was a bug in the routine which shortened the file names (it
always produces strings 1 too long).  This is now fixed with a test.

The formatting string was wrong with a fixed width of 45 - this is now
replaces with the value of `--stats-file-name-length`.

This also meant that there were unecessary leading spaces in the file
names.  So the default `--stats-file-name-length` was raised to 45
from 40.
2019-01-14 16:12:39 +00:00
Dario Guzik
7782eda88e check: Add stats showing total files matched. 2019-01-11 14:13:48 +00:00
Joanna Marek
e022ffce0f accounting: change too long names cutting mechanism - fixes #2490 2018-09-18 10:27:23 +01:00