rclone/cmd/bisync/testdata/test_createemptysrcdirs/golden/test.log
nielash 9c96c13a35 bisync: optimize --resync performance -- partially addresses #5681
Before this change, --resync was handled in three steps, and needed to do a lot
of unnecessary work to implement its own --ignore-existing logic, which also
caused problems with unicode normalization, in addition to being pretty slow.
After this change, it is refactored to produce the same result much more
efficiently, by reducing the three steps to two and letting ci.IgnoreExisting
do the work instead of reinventing the wheel.

The behavior and sync order remain unchanged for now -- just faster (but see
the ongoing lively discussions about potential future changes in #5681!)
2024-01-20 14:50:08 -05:00

147 lines
7.5 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

(01) : test createemptysrcdirs
(02) : test initial bisync
(03) : touch-glob 2001-01-02 {datadir/} placeholder.txt
(04) : copy-as {datadir/}placeholder.txt {path1/} file1.txt
(05) : copy-as {datadir/}placeholder.txt {path1/} file1.copy1.txt
(06) : copy-as {datadir/}placeholder.txt {path1/} file1.copy2.txt
(07) : copy-as {datadir/}placeholder.txt {path1/} file1.copy3.txt
(08) : copy-as {datadir/}placeholder.txt {path1/} file1.copy4.txt
(09) : copy-as {datadir/}placeholder.txt {path1/} file1.copy5.txt
(10) : bisync resync
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Copying unique Path2 files to Path1
INFO : - Path2 Resync is copying UNIQUE files to - Path1
INFO : - Path1 Resync is copying UNIQUE OR DIFFERING files to - Path2
INFO : Resync updating listings
INFO : Bisync successful
(11) : test 1. Create an empty dir on Path1 by creating subdir/placeholder.txt and then deleting the placeholder
(12) : copy-as {datadir/}placeholder.txt {path1/} subdir/placeholder.txt
(13) : touch-glob 2001-01-02 {path1/} subdir
(14) : delete-file {path1/}subdir/placeholder.txt
(15) : test 2. Run bisync without --create-empty-src-dirs
(16) : bisync
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : Path2 checking for diffs
INFO : No changes found
INFO : Updating listings
INFO : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
INFO : Bisync successful
(17) : test 3. Confirm the subdir exists only on Path1 and not Path2
(18) : list-dirs {path1/}
subdir/
(19) : list-dirs {path2/}
(20) : test 4.Run bisync WITH --create-empty-src-dirs
(21) : bisync create-empty-src-dirs
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : - Path1 File is new - subdir
INFO : Path1: 1 changes: 1 new, 0 newer, 0 older, 0 deleted
INFO : Path2 checking for diffs
INFO : Applying changes
INFO : - Path1 Queue copy to Path2 - {path2/}subdir
INFO : - Path1 Do queued copies to - Path2
INFO : Updating listings
INFO : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
INFO : Bisync successful
(22) : test 5. Confirm the subdir exists on both paths
(23) : list-dirs {path1/}
subdir/
(24) : list-dirs {path2/}
subdir/
(25) : test 6. Delete the empty dir on Path1 using purge-children (and also add files so the path isn't empty)
(26) : purge-children {path1/}
(27) : copy-as {datadir/}placeholder.txt {path1/} file1.txt
(28) : copy-as {datadir/}placeholder.txt {path1/} file1.copy1.txt
(29) : copy-as {datadir/}placeholder.txt {path1/} file1.copy2.txt
(30) : copy-as {datadir/}placeholder.txt {path1/} file1.copy3.txt
(31) : copy-as {datadir/}placeholder.txt {path1/} file1.copy4.txt
(32) : copy-as {datadir/}placeholder.txt {path1/} file1.copy5.txt
(33) : test 7. Run bisync without --create-empty-src-dirs
(34) : bisync
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : - Path1 File was deleted - RCLONE_TEST
INFO : - Path1 File was deleted - subdir
INFO : Path1: 2 changes: 0 new, 0 newer, 0 older, 2 deleted
INFO : Path2 checking for diffs
INFO : - Path2 File was deleted - subdir
INFO : Path2: 1 changes: 0 new, 0 newer, 0 older, 1 deleted
INFO : Applying changes
INFO : - Path2 Queue delete - {path2/}RCLONE_TEST
INFO : - Path1 Do queued copies to - Path2
INFO : Updating listings
INFO : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
INFO : Bisync successful
(35) : test 8. Confirm the subdir exists only on Path2 and not Path1
(36) : list-dirs {path1/}
(37) : list-dirs {path2/}
subdir/
(38) : test 9. Reset, do the delete again, and run bisync WITH --create-empty-src-dirs
(39) : bisync resync create-empty-src-dirs
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Copying unique Path2 files to Path1
INFO : - Path2 Resync is copying UNIQUE files to - Path1
INFO : - Path1 Resync is copying UNIQUE OR DIFFERING files to - Path2
INFO : Resync updating listings
INFO : Bisync successful
(40) : list-dirs {path1/}
subdir/
(41) : list-dirs {path2/}
subdir/
(42) : purge-children {path1/}
(43) : copy-as {datadir/}placeholder.txt {path1/} file1.txt
(44) : copy-as {datadir/}placeholder.txt {path1/} file1.copy1.txt
(45) : copy-as {datadir/}placeholder.txt {path1/} file1.copy2.txt
(46) : copy-as {datadir/}placeholder.txt {path1/} file1.copy3.txt
(47) : copy-as {datadir/}placeholder.txt {path1/} file1.copy4.txt
(48) : copy-as {datadir/}placeholder.txt {path1/} file1.copy5.txt
(49) : list-dirs {path1/}
(50) : list-dirs {path2/}
subdir/
(51) : bisync create-empty-src-dirs
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : - Path1 File was deleted - subdir
INFO : Path1: 1 changes: 0 new, 0 newer, 0 older, 1 deleted
INFO : Path2 checking for diffs
INFO : Applying changes
INFO : - Path2 Queue delete - {path2/}subdir
INFO : - Path1 Do queued copies to - Path2
INFO : subdir: Removing directory
INFO : Updating listings
INFO : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
INFO : Bisync successful
(52) : test 10. Confirm the subdir has been removed on both paths
(53) : list-dirs {path1/}
(54) : list-dirs {path2/}
(55) : test 11. bisync again (because if we leave subdir in listings, test will fail due to mismatched modtime)
(56) : bisync create-empty-src-dirs
INFO : Synching Path1 "{path1/}" with Path2 "{path2/}"
INFO : Building Path1 and Path2 listings
INFO : Path1 checking for diffs
INFO : Path2 checking for diffs
INFO : No changes found
INFO : Updating listings
INFO : Validating listings for Path1 "{path1/}" vs Path2 "{path2/}"
INFO : Bisync successful