8.8 KiB
% rclone(1) User Manual % Nick Craig-Wood % Jul 7, 2014
Rclone
Rclone is a command line program to sync files and directories to and from
- Google Drive
- Amazon S3
- Openstack Swift / Rackspace cloud files / Memset Memstore
- Dropbox
- Google Cloud Storage
- The local filesystem
Features
- MD5SUMs checked at all times for file integrity
- Timestamps preserved on files
- Partial syncs supported on a whole file basis
- Copy mode to just copy new/changed files
- Sync mode to make a directory identical
- Check mode to check all MD5SUMs
- Can sync to and from network, eg two different Drive accounts
See the Home page for more documentation and configuration walkthroughs.
Install
Rclone is a Go program and comes as a single binary file.
Download the binary for your OS from
Or alternatively if you have Go installed use
go install github.com/ncw/rclone
and this will build the binary in $GOPATH/bin.
Configure
First you'll need to configure rclone. As the object storage systems
have quite complicated authentication these are kept in a config file
.rclone.conf in your home directory by default. (You can use the
--config option to choose a different config file.)
The easiest way to make the config is to run rclone with the config option, Eg
rclone config
Usage
Rclone syncs a directory tree from local to remote.
Its basic syntax is
Syntax: [options] subcommand <parameters> <parameters...>
See below for how to specify the source and destination paths.
Subcommands
rclone copy source:path dest:path
Copy the source to the destination. Doesn't transfer unchanged files, testing first by modification time then by MD5SUM. Doesn't delete files from the destination.
rclone sync source:path dest:path
Sync the source to the destination. Doesn't transfer
unchanged files, testing first by modification time then by
MD5SUM. Deletes any files that exist in source that don't
exist in destination. Since this can cause data loss, test
first with the --dry-run flag.
rclone ls [remote:path]
List all the objects in the the path with sizes.
rclone lsl [remote:path]
List all the objects in the the path with sizes and timestamps.
rclone lsd [remote:path]
List all directories/objects/buckets in the the path.
rclone mkdir remote:path
Make the path if it doesn't already exist
rclone rmdir remote:path
Remove the path. Note that you can't remove a path with objects in it, use purge for that.
rclone purge remote:path
Remove the path and all of its contents.
rclone check source:path dest:path
Checks the files in the source and destination match. It compares sizes and MD5SUMs and prints a report of files which don't match. It doesn't alter the source or destination.
rclone md5sum remote:path
Produces an md5sum file for all the objects in the path. This is in the same format as the standard md5sum tool produces.
General options:
--checkers=8: Number of checkers to run in parallel.
--config="~/.rclone.conf": Config file.
-n, --dry-run=false: Do a trial run with no permanent changes
--modify-window=1ns: Max time diff to be considered the same
-q, --quiet=false: Print as little stuff as possible
--stats=1m0s: Interval to print stats
--transfers=4: Number of file transfers to run in parallel.
-v, --verbose=false: Print lots more stuff
Developer options:
--cpuprofile="": Write cpu profile to file
Local Filesystem
Paths are specified as normal filesystem paths, so
rclone sync /home/source /tmp/destination
Will sync /home/source to /tmp/destination
Swift / Rackspace cloudfiles / Memset Memstore
Paths are specified as remote:container (or remote: for the lsd
command.) You may put subdirectories in too, eg
remote:container/path/to/dir.
So to copy a local directory to a swift container called backup:
rclone sync /home/source swift:backup
The modified time is stored as metadata on the object as
X-Object-Meta-Mtime as floating point since the epoch.
This is a defacto standard (used in the official python-swiftclient amongst others) for storing the modification time (as read using os.Stat) for an object.
Amazon S3
Paths are specified as remote:bucket. You may put subdirectories in
too, eg remote:bucket/path/to/dir.
So to copy a local directory to a s3 container called backup
rclone sync /home/source s3:backup
The modified time is stored as metadata on the object as
X-Amz-Meta-Mtime as floating point since the epoch.
Google drive
Paths are specified as remote:path Drive paths may be as deep as required.
The initial setup for drive involves getting a token from Google drive
which you need to do in your browser. rclone config walks you
through it.
To copy a local directory to a drive directory called backup
rclone copy /home/source remote:backup
Google drive stores modification times accurate to 1 ms natively.
Dropbox
Paths are specified as remote:path Dropbox paths may be as deep as required.
The initial setup for dropbox involves getting a token from Dropbox
which you need to do in your browser. rclone config walks you
through it.
To copy a local directory to a drive directory called backup
rclone copy /home/source dropbox:backup
Md5sums and timestamps in RFC3339 format accurate to 1ns are stored in a Dropbox datastore called "rclone". Dropbox datastores are limited to 100,000 rows so this is the maximum number of files rclone can manage on Dropbox.
Google Cloud Storage
Paths are specified as remote:path Google Cloud Storage paths may be as deep as required.
The initial setup for Google Cloud Storage involves getting a token
from Google which you need to do in your browser. rclone config
walks you through it.
To copy a local directory to a google cloud storage directory called backup
rclone copy /home/source remote:backup
Google google cloud storage stores md5sums natively and rclone stores modification times as metadata on the object, under the "mtime" key in RFC3339 format accurate to 1ns.
Single file copies
Rclone can copy single files
rclone src:path/to/file dst:path/dir
Or
rclone src:path/to/file dst:path/to/file
Note that you can't rename the file if you are copying from one file to another.
License
This is free software under the terms of MIT the license (check the COPYING file included in this package).
Bugs
- Drive: Sometimes get: Failed to copy: Upload failed: googleapi: Error 403: Rate Limit Exceeded
- quota is 100.0 requests/second/user
- Empty directories left behind with Local and Drive
- eg purging a local directory with subdirectories doesn't work
Changelog
- v1.04 - 2014-07-21
- google cloud storage: Fix crash on Update
- v1.03 - 2014-07-20
- swift, s3, dropbox: fix updated files being marked as corrupted
- Make compile with go 1.1 again
- v1.02 - 2014-07-19
- Implement Dropbox remote
- Implement Google Cloud Storage remote
- Verify Md5sums and Sizes after copies
- Remove times from "ls" command - lists sizes only
- Add add "lsl" - lists times and sizes
- Add "md5sum" command
- v1.01 - 2014-07-04
- drive: fix transfer of big files using up lots of memory
- v1.00 - 2014-07-03
- drive: fix whole second dates
- v0.99 - 2014-06-26
- Fix --dry-run not working
- Make compatible with go 1.1
- v0.98 - 2014-05-30
- s3: Treat missing Content-Length as 0 for some ceph installations
- rclonetest: add file with a space in
- v0.97 - 2014-05-05
- Implement copying of single files
- s3 & swift: support paths inside containers/buckets
- v0.96 - 2014-04-24
- drive: Fix multiple files of same name being created
- drive: Use o.Update and fs.Put to optimise transfers
- Add version number, -V and --version
- v0.95 - 2014-03-28
- rclone.org: website, docs and graphics
- drive: fix path parsing
- v0.94 - 2014-03-27
- Change remote format one last time
- GNU style flags
- v0.93 - 2014-03-16
- drive: store token in config file
- cross compile other versions
- set strict permissions on config file
- v0.92 - 2014-03-15
- Config fixes and --config option
- v0.91 - 2014-03-15
- Make config file
- v0.90 - 2013-06-27
- Project named rclone
- v0.00 - 2012-11-18
- Project started
Contact and support
The project website is at:
There you can file bug reports, ask for help or send pull requests.
Authors
- Nick Craig-Wood nick@craig-wood.com
Contributors
- Your name goes here!