extern/shorewall_code
1
0
Fork 1
mirror of https://gitlab.com/shorewall/code.git synced 2024-12-22 14:20:40 +01:00
Code Issues Packages Projects Releases Wiki Activity

Update for Shorewall 2.2.0

Browse Source 
git-svn-id: https://shorewall.svn.sourceforge.net/svnroot/shorewall/trunk@1749 fbd18981-670d-0410-9b5c-8dc0c1a9a2bb
This commit is contained in:
teastep 2004-11-10 21:30:46 +00:00
parent 65fdb71ed4
commit fd206c8dea
7 changed files with 185 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Samples/one-interface/interfaces
View File

@ -76,7 +76,7 @@
# Check packets arriving on this interface
# against the /etc/shorewall/blacklist
# file.
# logmartians
# logmartians
# Turn on kernel martian logging (logging
# of packets with impossible source
# addresses. It is suggested that if you

20
Samples/three-interfaces/interfaces
View File

@ -76,6 +76,14 @@
# Check packets arriving on this interface
# against the /etc/shorewall/blacklist
# file.
# logmartians
# Turn on kernel martian logging (logging
# of packets with impossible source
# addresses. It is suggested that if you
# set routefilter on an interface that
# you also set logmartians. This option
# may also be enabled globally in the
# /etc/shorewall/shorewall.conf file.
# maclist
# Connection requests from this interface
# are compared against the contents of
@ -105,9 +113,19 @@
# which are not part of an established connection
# will be accepted from this interface, even if
# NEWNOTSYN=No has been specified in
# /etc/shorewall/shorewall.conf.
# /etc/shorewall/shorewall.conf. In other
# words, packets coming in on this interface
# are processed as if NEWNOTSYN=Yes had been
# specified in /etc/shorewall/shorewall.conf.
#
# This option has no effect if NEWNOTSYN=Yes.
#
# It is the opinion of the author that
# NEWNOTSYN=No creates more problems than
# it solves and I recommend against using
# that setting in shorewall.conf (hence
# making the use of the 'newnotsyn'
# interface option unnecessary).
# routeback
# If specified, indicates that Shorewall
# should include rules that allow filtering

105
Samples/three-interfaces/masq
View File

@ -1,5 +1,5 @@
#
# Shorewall 2.0 - Sample Masquerade file For Three Interfaces
# Shorewall 2.2 - Sample Masquerade file For Three Interfaces
#
# etc/shorewall/masq
#
@ -22,6 +22,25 @@
# ":" followed by a destination host or subnet.
#
#
# If you wish to inhibit the action of ADD_SNAT_ALIASES
# for this entry then include the ":" but omit the digit:
#
# eth0:
# eth2::192.0.2.32/27
#
# Normally Masq/SNAT rules are evaluated after those for
# one-to-one NAT (/etc/shorewall/nat file). If you want
# the rule to be applied before one-to-one NAT rules,
# prefix the interface name with "+":
#
# +eth0
# +eth0:192.0.2.32/27
# +eth0:2
#
# This feature should only be required if you need to
# insert rules in this file that preempt entries in
# /etc/shorewall/nat.
#
# SUBNET
# Subnet that you wish to masquerade. You can specify this as
# a subnet or as an interface. If you give the name of an
@ -54,6 +73,74 @@
#
# This column may not contain a DNS Names.
#
# Normally, Netfilter will attempt to retain
# the source port number. You may cause
# netfilter to remap the source port by following
# an address or range (if any) by ":" and
# a port range with the format <low port>-
# <high port>. If this is done, you must
# specify "tcp" or "udp" in the PROTO column.
#
# Examples:
#
# 192.0.2.4:5000-6000
# :4000-5000
#
# If you want to leave this column empty
# but you need to specify the next column then
# place a hyphen ("-") here.
#
# PROTO -- (Optional)
# If you wish to restrict this entry to a
# particular protocol then enter the protocol
# name (from /etc/protocols) or number here.
#
# PORT(S) -- (Optional)
# If the PROTO column specifies TCP (protocol 6)
# or UDP (protocol 17) then you may list one
# or more port numbers (or names from
# /etc/services) separated by commas or you
# may list a single port range
# (<low port>:<high port>).
#
# Where a comma-separated list is given, your
# kernel and iptables must have multiport match
# support and a maximum of 15 ports may be listed.
#
# IPSEC -- (Optional)
# If you specify a value other than "-" in this
# column, you must be running kernel 2.6 and
# your kernel and iptables must include policy
# match support.
#
# Comma-separated list of options from the following.
# Only packets that will be encrypted via an SA that
# matches these options will have their source address
# changed.
#
# reqid=<number> where <number> is specified
# using setkey(8) using the 'unique:<number>
# option for the SPD level.
#
# spi=<number> where <number> is the SPI of
# the SA.
#
# proto=ah|esp|ipcomp
#
# mode=transport|tunnel
#
# tunnel-src=<address>[/<mask>] (only
# available with mode=tunnel)
#
# tunnel-dst=<address>[/<mask>] (only
# available with mode=tunnel)
#
# strict Means that packets must match all
# rules.
#
# next Separates rules; can only be used
# with strict..
#
# Example 1:
#
# You have a simple masquerading setup where eth0 connects to
@ -98,8 +185,22 @@
# #INTERFACE SUBNET ADDRESS
# eth0:0 192.168.1.0/24 206.124.146.176
#
# Example 5:
#
# You want all outgoing SMTP traffic entering the firewall
# on eth1 to be sent from eth0 with source IP address
# 206.124.146.177. You want all other outgoing traffic
# from eth1 to be sent from eth0 with source IP address
# 206.124.146.176.
#
# INTERFACE SUBNET ADDRESS PROTO PORT(S)
# eth0 eth1 206.124.146.177 tcp smtp
# eth0 eth1 206.124.146.176
#
# THE ORDER OF THE ABOVE TWO RULES IS SIGNIFICANT!!!!!
#
##############################################################################
#INTERFACE SUBNET ADDRESS
#INTERFACE SUBNET ADDRESS PROTO PORT(S) IPSEC
eth0 eth1
eth0 eth2
#LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE

2
Samples/three-interfaces/policy
View File

@ -1,5 +1,5 @@
#
# Shorewall 2.0 -- Sample Policy File For Three Interfaces
# Shorewall 2.2 -- Sample Policy File For Three Interfaces
#
# /etc/shorewall/policy
#

5
Samples/three-interfaces/routestopped
View File

@ -1,6 +1,6 @@
##############################################################################
#
# Shorewall 2.0 -- Sample Routestopped File For Three Interfaces.
# Shorewall 2.2 -- Sample Routestopped File For Three Interfaces.
#
# /etc/shorewall/routestopped
#
@ -17,6 +17,9 @@
# addresses. If left empty or supplied as "-",
# 0.0.0.0/0 is assumed.
#
# If your kernel and iptables include iprange match
# support, IP address ranges are also allowed.
#
# Example:
#
# INTERFACE HOST(S)

69
Samples/three-interfaces/rules
View File

@ -1,5 +1,5 @@
#
# Shorewall version 2.0 -- Sample Rules File For Three Interfaces
# Shorewall version 2.2 -- Sample Rules File For Three Interfaces
#
# /etc/shorewall/rules
#
@ -27,6 +27,15 @@
#
# ACCEPT
# Allow the connection request.
# ACCEPT+
# Like ACCEPT but also excludes the
# connection from any subsequent
# DNAT[-] or REDIRECT[-] rules
# NONAT
# Excludes the connection from any
# subsequent DNAT[-] or REDIRECT[-]
# rules but doesn't generate a rule
# to accept the traffic.
# DROP
# Ignore the request.
# REJECT
@ -74,11 +83,35 @@
# level (e.g, REJECT:info or DNAT:debug). This causes the packet
# to be logged at the specified level.
#
#
# If the ACTION names an action defined in
# /etc/shorewall/actions or in
# /usr/share/shorewall/actions.std then:
#
# - If the log level is followed by "!' then all rules
# in the action are logged at the log level.
#
# - If the log level is not followed by "!" then only
# those rules in the action that do not specify
# logging are logged at the specified level.
#
# - The special log level 'none!' suppresses logging
# by the action.
#
# You may also specify ULOG (must be in upper case) as a
# log level. This will log to the ULOG target for routing
# to a separate log through use of ulogd.
# (http://www.gnumonks.org/projects/ulogd).
#
# Actions specifying logging may be followed by a
# log tag (a string of alphanumeric characters)
# are appended to the string generated by the
# LOGPREFIX (in /etc/shorewall/shorewall.conf).
#
# Example: ACCEPT:info:ftp would include 'ftp '
# at the end of the log prefix generated by the
# LOGPREFIX setting.
#
# SOURCE Source hosts to which the rule applies. May be a zone
# defined in /etc/shorewall/zones, $FW to indicate the
# firewall itself, or "all" If the ACTION is DNAT or
@ -86,6 +119,10 @@
# excluded from the rule by following the zone name with
# "!' and a comma-separated list of sub-zone names.
#
# When "all" is used either in the SOURCE or DEST column
# intra-zone traffic is not affected. You must add
# separate rules to handle that traffic.
#
# Except when "all" is specified, clients may be further
# restricted to a list of subnets and/or hosts by
# appending ":" and a comma-separated list of subnets
@ -93,6 +130,10 @@
# address; mac addresses must begin with "~" and must use
# "-" as a separator.
#
# Hosts may be specified as an IP address range using the
# syntax <low address>-<high address>. This requires that
# your kernel and iptables contain iprange match support.
#
# Some Examples:
#
# net:155.186.235.1
@ -110,6 +151,10 @@
# Host on the Local Network with
# MAC address 00:A0:C9:15:39:78.
#
# net:192.0.2.11-192.0.2.17
# Hosts 192.0.2.11-192.0.2.17 in
# the net zone.
#
# Alternatively, clients may be specified by interface
# by appending ":" to the zone name followed by the
# interface name. For example, net:eth0 specifies a
@ -157,14 +202,20 @@
# contain the port number on the firewall that the
# request should be redirected to.
#
# PROTO Protocol - Must be "tcp", "udp", "icmp", a number,
# "all".
# PROTO Protocol - Must be "tcp", "udp", "icmp", "ipp2p",
# a number, or "all". "ipp2p" requires ipp2p match
# support in your kernel and iptables.
#
# DEST PORT(S) Destination Ports. A comma-separated list of Port
# names (from /etc/services), port numbers or port
# ranges; if the protocol is "icmp", this column is
# interpreted as the destination icmp-type(s).
#
# If the protocol is ipp2p, this column is interpreted
# as an ipp2p option without the leading "--" (example "bit"
# for bit-torrent). If no port is given, "ipp2p" is
# assumed.
#
# A port range is expressed as <low port>:<high port>.
#
# This column is ignored if PROTOCOL = all but must be
@ -186,8 +237,8 @@
# ranges.
#
# If you don't want to restrict client ports but need to
# specify an ADDRESS in the next column, then place "-"
# in this column.
# specify an ORIGINAL DEST in the next column, then place
# "-" in this column.
#
# If your kernel contains multi-port match support, then
# only a single Netfilter rule will be generated if in
@ -214,14 +265,6 @@
# destination address in the connection request does not
# match any of the addresses listed.
#
# The address may optionally be followed by
# a colon (":") and a second IP address. This causes
# Shorewall to use the second IP address as the source
# address in forwarded packets. See the Shorewall
# documentation for restrictions concerning this feature.
# If no source IP address is given, the original source
# address is not altered.
#
# RATE LIMIT You may rate-limit the rule by placing a value in this column:
#
# <rate>/<interval>[:<burst>]

2
Samples/three-interfaces/zones
View File

@ -1,5 +1,5 @@
#
# Shorewall 2.0 -- Sample Zone File For Two Interfaces
# Shorewall 2.2 -- Sample Zone File For Two Interfaces
# /etc/shorewall/zones
#
# This file determines your network zones. Columns are: