Replace numbered points with dot points.

This commit is contained in:
Brian May 2015-12-15 14:23:19 +11:00
parent 1e81bf3dfc
commit 3db38c992a

View File

@ -72,39 +72,39 @@ later.
There are some things you need to consider for TPROXY to work:
1. The following commands need to be run first as root. This only needs to be
done once after booting up::
- The following commands need to be run first as root. This only needs to be
done once after booting up::
ip route add local default dev lo table 100
ip rule add fwmark 1 lookup 100
ip -6 route add local default dev lo table 100
ip -6 rule add fwmark 1 lookup 100
ip route add local default dev lo table 100
ip rule add fwmark 1 lookup 100
ip -6 route add local default dev lo table 100
ip -6 rule add fwmark 1 lookup 100
2. The client needs to be run as root. e.g.::
- The client needs to be run as root. e.g.::
sudo SSH_AUTH_SOCK="$SSH_AUTH_SOCK" $HOME/tree/sshuttle.tproxy/sshuttle --method=tproxy ...
sudo SSH_AUTH_SOCK="$SSH_AUTH_SOCK" $HOME/tree/sshuttle.tproxy/sshuttle --method=tproxy ...
3. You may need to exclude the IP address of the server you are connecting to.
Otherwise sshuttle may attempt to intercept the ssh packets, which will not
work. Use the `--exclude` parameter for this.
- You may need to exclude the IP address of the server you are connecting to.
Otherwise sshuttle may attempt to intercept the ssh packets, which will not
work. Use the `--exclude` parameter for this.
4. Similarly, UDP return packets (including DNS) could get intercepted and
bounced back. This is the case if you have a broad subnet such as
``0.0.0.0/0`` that includes the IP address of the client. Use the
`--exclude` parameter for this.
- Similarly, UDP return packets (including DNS) could get intercepted and
bounced back. This is the case if you have a broad subnet such as
``0.0.0.0/0`` that includes the IP address of the client. Use the
`--exclude` parameter for this.
5. You do need the `--method=tproxy` parameter, as above.
- You do need the `--method=tproxy` parameter, as above.
6. The routes for the outgoing packets must already exist. For example, if your
connection does not have IPv6 support, no IPv6 routes will exist, IPv6
packets will not be generated and sshuttle cannot intercept them::
- The routes for the outgoing packets must already exist. For example, if your
connection does not have IPv6 support, no IPv6 routes will exist, IPv6
packets will not be generated and sshuttle cannot intercept them::
telnet -6 www.google.com 80
Trying 2404:6800:4001:805::1010...
telnet: Unable to connect to remote host: Network is unreachable
telnet -6 www.google.com 80
Trying 2404:6800:4001:805::1010...
telnet: Unable to connect to remote host: Network is unreachable
Add some dummy routes to external interfaces. Make sure they get removed
however after sshuttle exits.
Add some dummy routes to external interfaces. Make sure they get removed
however after sshuttle exits.
Obtaining sshuttle