When I starting sshuttle with option `--seed-hosts example.com`, got the following error:
```
hostwatch: Starting hostwatch with Python version 3.5.2
hostwatch: Traceback (most recent call last):
---> File "sshuttle.server", line 144, in start_hostwatch
---> File "sshuttle.hostwatch", line 272, in hw_main
---> File "sshuttle.hostwatch", line 234, in check_host
---> File "sshuttle.hostwatch", line 32, in _is_ip
---> File "/usr/lib/python3.5/re.py", line 163, in match
---> return _compile(pattern, flags).match(string)
---> TypeError: cannot use a string pattern on a bytes-like object
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "assembler.py", line 37, in <module>
File "sshuttle.server", line 393, in main
File "sshuttle.ssnet", line 596, in runonce
File "sshuttle.server", line 324, in hostwatch_ready
sshuttle.helpers.Fatal: hostwatch process died
```
It seems like the list of hosts is not properly decoded on the server side. This is an attempt to fix that.
With this configuration it should be feasible to achieve a perfect score
without contortion.
Rules skiped for Bandit:
B101: assert_used
B104: hardcoded_bind_all_interfaces
B404: import_subprocess
B603: subprocess_without_shell_equals_true
B606: start_process_with_no_shell
B607: start_process_with_partial_path
Rules skiped for pylint:
- too-many-statements
- too-many-locals
- too-many-function-args
- too-many-arguments
- too-many-branches
- bare-except
- protected-access
- no-else-return
As suggested by @colinmkeith the UDP and DNS proxies should listen on different
ports otherwise the DNS proxy can get traffic intended to the UDP proxy (or
vice-versa) and handle it incorrectly as reported in #178.
At first sight it seems that we had the code in place to try another port if
the one we are binding is already bound, however, with UDP and REUSEADDR the
OS will not refuse to bind two sockets to the same socket address, so both
the UDP proxy and DNS proxy were being bound to the same pair.
Some Linux distros, like Alpine, Arch, etc and some BSDs, like FreeBSD, are
now shipping with python3.6 as the default python3. Both the client and the
server are failing to run in this distros, because we are specifically looking
for python3.5.
These changes make the run shell script use python3 if the version is greater
than 3.5, otherwise falling back as usual.
On the server any version of python3 will do, use it before falling back to
python, as the server code can run with any version of python3.
When the pf module is not loaded our calls to pfctl will fail with
unhelpful messages.
This change spares the user the pain of decrypting those messages and manually
enabling pf. It also keeps track if pf was loaded by sshuttle and unloads on
exit if that was the case.
Also fixed the case where both ipv4 and ipv6 anchors were added by sshuttle
but the first call of disable would disable pf before the second call had the
chance of cleaning it's anchor.
If we receive no routes from server or if, for some reason, we receive
some empty lines, we should skip them instead of crashing.
Fixes on of the problems in #147.
Currently hostwatch only adds hostnames even when FQDNs are available.
This commit changes found_host so that when the name is a FQDN, both the FQDN
and an hostname are added, e.g., given api.foo.com both api and api.foo.com
will be added.
Fixes#151 if merged.
N.B.: I rarely use hostwatch, it would probably be a good idea to get feedback
from people who actually use it before merging. Not too sure about this...
While with AF_INET sockaddr is a 2-tuple composed by (address, port),
with AF_INET6 it is a 4-tuple with (address, port, flow info, scope id).
We were always passing a 2-tuple to socket.connect which would fail whenever
the address was, for instance, a link-local IPv6 address that needs a scope id.
With this change we now use getaddrinfo to correctly compute the full tuple.
Fixes#156.
When doing port forwarding on lo0 avoid the special case where the
traffic on lo0 did not came from sshuttle pass out rule but from the lo0
address itself. Fixes#159.
This change makes the subnets with the most specific port ranges come
before subnets with larger, least specific, port ranges. Before this
change subnets with smaller swidth would always come first and only for
subnets with the same width would the size of the port range be
considered.
Example:
188.0.0.0/8 -x 0.0.0.0/0:443
Before: 188.0.0.0/8 would come first meaning that all ports would be
routed through the VPN for the subnet 188.0.0.0/8
After: 0.0.0.0/0:443 comes first, meaning that port 443 will be
excluded for all subnets, including 188.0.0.0/8. All other ports of
188.0.0.0/8 will be routed.
* Adds support for tunneling specific port ranges
This set of changes implements the ability of specifying a port or port
range for an IP or subnet to only tunnel those ports for that subnet.
Also supports excluding a port or port range for a given IP or subnet.
When, for a given subnet, there are intercepting ranges being added and
excluded, the most specific, i.e., smaller range, takes precedence. In
case of a tie the exclusion wins.
For different subnets, the most specific, i.e., largest swidth, takes
precedence independent of any eventual port ranges.
Examples:
Tunnels all traffic to the 188.0.0.0/8 subnet except those to port 443.
```
sshuttle -r <server> 188.0.0.0/8 -x 188.0.0.0/8:443
```
Only tunnels traffic to port 80 of the 188.0.0.0/8 subnet.
```
sshuttle -r <server> 188.0.0.0/8:80
```
Tunnels traffic to the 188.0.0.0/8 subnet and the port range that goes
from 80 to 89.
```
sshuttle -r <server> 188.0.0.0/8:80-89 -x 188.0.0.0/8:80-90
```
* Allow subnets to be specified with domain names
Simplifies the implementation of address parsing by using
socket.getaddrinfo(), which can handle domain resolution, IPv4 and IPv6
addresses. This was proposed and mostly implemented by @DavidBuchanan314
in #146.
Signed-off-by: David Buchanan <DavidBuchanan314@users.noreply.github.com>
Signed-off-by: João Vieira <vieira@yubo.be>
* Also use getaddrinfo for parsing listen addr:port
* Fixes tests for tunneling a port range
* Updates documentation to include port/port range
Adds some examples with subnet:port and subnet:port-port.
Also clarifies the versions of Python supported on the server while
maintaining the recommendation for Python 2.7, 3.5 or later.
Mentions support for pfSense.
* In Py2 only named arguments may follow *expression
Fixes issue in Python 2.7 where *expression may only be followed by
named arguments.
* Use right regex to extract ip4/6, mask and ports
* Tests for parse_subnetport
netstat outputs some headers in BSD (that the Linux version does not)
that are not tabular and were breaking our 'split line into columns
and get nth column' logic. We now skip such headers.
Should fix#141.
There was runtime failure on UDP or DNS processing, because "socket" was redefined to PyXAPI's socket_ext in tproxy.py, but still was plain Python's socket in client.py
Fixed https://github.com/sshuttle/sshuttle/issues/134 for me
`netstat` has been deprecated for some time and some distros might
start shipping without it in the near future. This commit adds support
for `ip route` and uses it when available.
PfSense is based on FreeBSD and its pf is pretty close to the one
FreeBSD ships, however some structures have different fields and two
offsets had to be fixed.
