nicm
81069f66f9
Add a format to show if client is a control client. From Bruno Sutic.
2015-07-13 15:37:26 +00:00
nicm
6308c48efd
Add a -s flag to show-environment to output Bourne shell commands a la
...
ssh-agent. Mostly from Cam Hutchison with some changes by me.
2015-07-13 13:36:29 +00:00
nicm
cc768d77ec
Revert to marking lines as wrapped on newlines, fixes problems with
...
capturep -J.
2015-07-13 13:28:50 +00:00
nicm
b298478435
Update environment with -E when attach-session used on an already
...
attached session or switch-client used on the current session. From Cam
Hutchison.
2015-07-06 14:24:57 +00:00
nicm
f557c7d8ca
Use the SRCDST define for usage.
2015-06-18 23:56:01 +00:00
nicm
b43b13faf9
Use xsnprintf.
2015-06-18 23:55:24 +00:00
nicm
164ba041c9
Remove a stray : and tweak paragraph.
2015-06-18 23:53:56 +00:00
nicm
85120b37ea
Change break-pane to take target and source panes (-t and -s) in line
...
with other commands, from Thomas Adam.
2015-06-17 19:56:08 +00:00
nicm
84f0622c85
Break cmdq_continue inner loop into a helper function.
2015-06-17 17:02:15 +00:00
nicm
0ff335961e
Move the shuffle code from new-window -a into a function and add a -a
...
flag for move-window too. From Thomas Adam.
2015-06-17 16:50:28 +00:00
nicm
021cdbe1c0
Use an explicit job state instead of avoid closing our side of the
...
socketpair and setting it to -1 to mark when the other side is
closed. This avoids closing it while the libevent bufferevent still has
it (it could try to add it to the polled set which some mechanisms don't
like). Fixes part a problem reported by Bruno Sutic.
2015-06-17 16:44:49 +00:00
nicm
d96ab34019
Add window_activity format, from Thomas Adam based on a diff originally
...
from propos6 at gmail dot com.
2015-06-15 10:58:01 +00:00
nicm
29c29e7717
Add a format for client PID (client_pid) and server PID (pid). Diff for
...
client_pid from Thomas Adam.
2015-06-14 10:07:44 +00:00
nicm
bbc0898060
wp->tty is a char [] not a char * so it can't be NULL. From Thomas Adam.
2015-06-10 12:56:04 +00:00
nicm
a412dd616f
Fix loop comparison broken in last commit, from Thomas Adam.
2015-06-09 07:07:06 +00:00
nicm
c4e811e519
Add -E flag when attaching or switching client to bypass
...
update-environment, from Steven Lu.
2015-06-07 21:39:39 +00:00
nicm
ed6c036ee3
Use ints for the calculations rather than u_char, they could end up
...
signed.
2015-06-05 22:50:27 +00:00
nicm
55b96a5bd5
Handle the RGB colour escape sequence (\033[38;2;<r>;<g>;<b>m and 48;2)
...
like xterm(1) does, by mapping to the nearest in the 256 colour palette.
2015-06-05 22:33:39 +00:00
nicm
1cb073d48e
Use fixed colour tables rather than generated and do a quick search for
...
exact match before doing the distance comparison.
2015-06-05 22:01:17 +00:00
nicm
641a9cd3f5
Similarly, for sessions use a callback to free rather than checking
...
every loop.
2015-06-05 18:18:32 +00:00
nicm
10e90ae01f
Change deref to the more sensible unref, and add a couple I missed before.
2015-06-05 18:06:30 +00:00
nicm
8c93b768e4
Instead of putting dead clients on a list and checking it every loop,
...
use event_once to queue a callback to deal with them. Also dead clients
with references would never actually be freed because the wrap-up
functions (the callback for stdin, or status_prompt_clear) would never
be called. So call them in server_client_lost.
2015-06-05 18:01:12 +00:00
nicm
b0782df8a6
Do not use the key variable uninitialized (in a debug log statement),
...
reported by jungleboogie0 at gmail dot com.
2015-06-05 15:10:13 +00:00
nicm
2f586905fc
Fix a warning.
2015-06-05 09:09:08 +00:00
nicm
4219939c10
Make it so that if a window or session target is prefixed with an =,
...
only an exact name or index match is accepted, no special character,
prefix match, or fnmatch.
2015-06-05 08:14:16 +00:00
nicm
6b2129696f
Move the nested check from client to server and compare the client tty
...
name to all the pane pty names instead of comparing socket paths. This
means that "new -d" will work without unsetting $TMUX.
2015-06-04 23:27:51 +00:00
jmc
dc0d34e137
tweak SYNOPSIS and usage();
2015-06-04 20:34:22 +00:00
nicm
4a6c06d6a9
Make unsetting a global option restore it to the default. Diff lying
...
around for a while, I have forgotten who suggested it :-/.
2015-06-04 14:29:33 +00:00
nicm
a863834574
Add support for a single "marked pane". There is one marked pane in the
...
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
2015-06-04 11:43:51 +00:00
nicm
a3edfd9e84
teminal -> terminal, from Corey Farwell.
2015-06-04 09:42:29 +00:00
nicm
a3c6172495
Missing t at end of response, from Vincent Bernat.
2015-06-01 13:59:57 +00:00
nicm
58b50fb543
Clear signal handlers before event_reinit as apparently it can otherwise
...
cause libevent to go strange.
2015-06-01 09:20:19 +00:00
deraadt
7e067cb9dc
does not need syslog.h
2015-05-31 23:27:06 +00:00
nicm
2a8c2648f0
Don't use special strings if #() commands fail, just remove the format
...
(as if the command produced nothing). Makes constructions that can fail
like '#(test whatever && echo foo)' work as they did before.
2015-05-29 23:26:52 +00:00
nicm
74c755f2ab
Expand formats again inside #(), and free the temporaries.
2015-05-29 23:12:38 +00:00
nicm
a55e569af5
Use RB_MIN to get the lowest index for the current window when creating
...
grouped sessions, rather than using RB_ROOT.
2015-05-29 23:02:27 +00:00
nicm
379400cfa6
Move the jobs output cache into the formats code so that #() work more
...
generally (for example, again working in set-titles-string).
2015-05-27 13:28:04 +00:00
nicm
7140cce7f3
Return empty string if format is empty rather than attempting to
...
allocate zero bytes.
2015-05-20 06:39:02 +00:00
nicm
2c53b23d59
In terminfo, sometimes cvvis implies cnorm and sometimes it doesn't, so
...
don't assume it does. Fixes missing cursor with emacs-in-tmux-in-tmux.
2015-05-19 08:48:37 +00:00
nicm
3f4ee98162
To replace c0-*, add a high watermark to the pty event, and also backoff
...
when the any of the ttys the pane is going to write to has buffered
enough data.
2015-05-12 22:40:38 +00:00
nicm
37ae8a9e0f
Tidy blank lines when outputting server info.
2015-05-12 19:36:08 +00:00
nicm
ec34439f9c
Add a session_alerts format which is a list of all the alerts in the
...
current session in symbolic form (something like "0!,4~,5!"). Use this
in the default set-titles-string. Prompted by a request from Jan ONDREJ.
2015-05-12 15:29:29 +00:00
nicm
e958db09a7
Add bell-action "other" to pass through bells in all windows except the
...
current, suggested by Jan ONDREJ.
2015-05-12 15:27:46 +00:00
nicm
b833fabeb2
Left the c0-* options behind in the table.
2015-05-11 10:58:22 +00:00
nicm
44364d7112
Remove the c0-* options which never really worked satisfactorily. Going
...
to try something else...
2015-05-11 10:10:16 +00:00
nicm
92faa2eaeb
Put the tty structs together, and tabify.
2015-05-08 16:48:12 +00:00
nicm
592cb73a69
grid_marker_cell is no longer used.
2015-05-08 16:44:03 +00:00
nicm
74b2c40b1b
mode_key_entry can go into mode-key.c; also a few spaces->tabs.
2015-05-08 16:33:29 +00:00
nicm
a538141a72
window_choose_mode_item can move into window-choose.c.
2015-05-08 16:23:34 +00:00
nicm
c4a4bd6ac5
Move input parser structs into input.c (removing fairly useless
...
saved_cursor_[xy] formats as a side-effect).
2015-05-08 16:18:04 +00:00
