c38e0a4bbc
Do not use c->cwd or s->cwd if it is NULL, found by Ben Boeckel.
2016-03-05 07:47:52 +00:00
1f0b317088
Although we always have en_US.UTF-8 on OpenBSD, some platforms do not,
...
so fall back to setlocale(LC_CTYPE, ""). tmux requires a UTF-8 locale,
so check with wcwidth() on a UTF-8 character after setlocale().
2016-03-05 07:44:31 +00:00
df0983af39
show-* and set-* need to handle a missing target.
2016-03-03 14:15:22 +00:00
fa81d838da
Accept clients as sessions in cmd_find_get_session.
2016-03-03 14:14:46 +00:00
bcb41a09b3
RGB colours shouldn't be mixed up with aixterm colours, return before
...
that happens when working out if they are supported.
2016-03-03 12:58:15 +00:00
b8a102d26f
Handle wcwidth() and mbtowc() failures in better style and drop
...
characters where we can't find the width (wcwidth() fails) on input, the
same as we drop invalid UTF-8. Suggested by schwarze@.
2016-03-02 15:36:02 +00:00
d980d965dd
Limit x, y and b to 0x7ff for UTF-8 mouse input, suggested by schwarze@.
2016-03-02 15:33:36 +00:00
f0239a8fe9
Remove some more unused variables, and use RB_FOREACH_SAFE in
...
key_bindings_unref_table.
2016-03-01 12:06:07 +00:00
2e4503ad4e
Redraw status on mode entry and exit.
2016-03-01 12:05:15 +00:00
54ea8f74ae
When a mouse drag is finished, fire a MouseUp key press, instead of
...
doing the drag end in code. From Stephen Coakley.
2016-03-01 12:04:43 +00:00
e647eeb0c9
Remove unused variables, from Michal Mazurek.
2016-03-01 12:02:54 +00:00
26945d7956
Use system wcwidth() instead of carrying around UTF-8 width tables.
2016-03-01 12:02:08 +00:00
c7851e0ee7
Fix break-pane synopsis and some other tmux.1 bits.
2016-03-01 11:58:45 +00:00
4f6bc0a0a9
Expand client formats in run-shell.
2016-02-12 12:24:52 +00:00
bc0c9c7920
Do not wrap cursor at start or end of history, from Michal Mazurek.
2016-02-05 10:20:06 +00:00
bdb8bb790e
Set up -t flag properly when passing new-session -A off to
...
attach-session, GitHub issue 295.
2016-02-04 14:11:20 +00:00
97882f9ce2
Clear RGB flags during selection.
2016-01-31 14:11:49 +00:00
fa64b89ad7
Whoops, need this for the previous reverse trim commit too.
2016-01-31 09:57:41 +00:00
49e9f93738
Add RGB escape sequences for capture-pane -e.
2016-01-31 09:57:09 +00:00
8028560f82
Support negative trim values (#{=-10:pane_title}) to trim from the end,
...
suggested by Kevin Brubeck Unhammer.
2016-01-31 09:54:46 +00:00
225a384dbb
Fix new-session with -t after command flags changes, reported by Michael Graczyk.
2016-01-31 09:52:01 +00:00
427b820426
Support for RGB colour, using the extended cell mechanism to avoid
...
wasting unnecessary space. The 'Tc' flag must be set in the external
TERM entry (using terminal-overrides or a custom terminfo entry), if not
tmux will map to the closest of the 256 or 16 colour palettes.
Mostly from Suraj N Kurapati, based on a diff originally by someone else.
2016-01-29 11:13:56 +00:00
b5b5221c13
Split out getting the current state from the target search so it can be
...
replaced if we already know the current.
2016-01-19 16:01:30 +00:00
995af0e2b7
I no longer use my SourceForge address so replace it.
2016-01-19 15:59:12 +00:00
c9815307eb
Add hooks for alerts (bell, silence, activity), from Thomas Adam.
2016-01-16 00:36:53 +00:00
d551ab8e5c
Clear the environment properly by looping until it is empty rather than
...
looping over it (which may skip entries), from Brad King.
2016-01-15 11:33:41 +00:00
68d797587e
A couple of missing printflike attributes, from Andrey Starodubtsev.
2016-01-15 11:31:47 +00:00
cfb78654c2
clock-mode needs CMD_PANE.
2016-01-02 17:16:25 +00:00
311be04d61
Don't rely on a calculation wrapping when applying message-limit, and
...
break out of the loop early. From Nicolas Viennot.
2016-01-01 08:04:20 +00:00
7e67db79dc
Remove an extra unzoom call which was probably a merge error.
2015-12-31 18:34:47 +00:00
f84d32ca5e
Use saved pipe buffer offset when writing to pipe, from Nicolas Viennot.
2015-12-31 18:14:13 +00:00
2a1f27eb1a
Couple of trivial style nits.
2015-12-28 14:02:52 +00:00
60cbdf9ccd
Repair switch-client -l and switch-client with a window target.
2015-12-23 00:12:57 +00:00
f2ec911b8a
Detach the right session with -d.
2015-12-21 09:20:13 +00:00
bdbec099cc
Make input off flag (selectp -d) apply to synchronize-panes too.
2015-12-19 08:43:04 +00:00
a337403868
As well as setting up the state, actually use it in cmd_find_target.
2015-12-17 23:08:22 +00:00
99e9a4c786
send-keys -R should reset the input parser to ground state (so it can be
...
used to escape from, for example, printf '\033]2;').
2015-12-16 22:05:35 +00:00
021c64310d
Add infrastructure to work out the best target given a pane or window
...
alone and use it to add pane_died and pane_exited hooks.
2015-12-16 21:50:37 +00:00
8eb1a7d5dc
showenv and setenv need to be CANFAIL.
2015-12-16 21:47:00 +00:00
909b737289
Copy state directly rather than dereferencing wl (which could be NULL).
2015-12-15 14:32:55 +00:00
ac9778395f
Some hooks API changes to fire a hook while waiting another cmdq and
...
infrastructure that will be needed soon.
2015-12-15 13:43:07 +00:00
9d88d82d5e
Allow list-keys and list-commands to be run without a running server.
2015-12-15 00:52:17 +00:00
6f417ec943
We changed somewhat recently to us the pty when tmux was run inside
...
itself to work out the current pane. This is confusing in many cases
(particularly notable is that "tmux neww\; splitw" would not split the
new window), and the few advantages do not make up for the confusion.
So drop this behaviour and return to using the current window and pane;
keep the pty check but only use it to limit the list of possible current
sessions.
2015-12-15 00:45:02 +00:00
56d097cfe0
Don't copy marked pane when can just point to it.
2015-12-15 00:11:24 +00:00
12da13c9d1
Make the marked pane a cmd_find_state.
2015-12-15 00:00:01 +00:00
d5999f8b5c
Use cmd_find_clear_state instead of an extra function doing the same.
2015-12-14 23:30:58 +00:00
a585a1b81a
Remove some stray debug code.
2015-12-14 00:32:19 +00:00
a3129fd4e8
Instead of combined flags for -c, -s, -t, split into different sets
...
using an enum and simplify the parsing code.
2015-12-14 00:31:54 +00:00
ecfeee2e82
Use member names in cmd_entry definitions so I stop getting confused
...
about the order.
2015-12-13 21:53:57 +00:00
899bee0056
Actually I thought cmd_get_state_client was unnecessary but it will be
...
needed.
2015-12-13 21:17:37 +00:00
