fixes https://github.com/zrepl/zrepl/issues/504
Problem:
plain send + recv with root_fs encrypted + placeholders causes plain recvs
whereas user would expect encrypt-on-recv
Reason:
We create placeholder filesytems with -o encryption=off.
Thus, children received below those placeholders won't inherit
encryption of root_fs.
Fix:
We'll have three values for `recv.placeholders.encryption: unspecified (default) | off | inherit`.
When we create a placeholder, we will fail the operation if `recv.placeholders.encryption = unspecified`.
The exception is if the placeholder filesystem is to encode the client identity ($root_fs/$client_identity) in a pull job.
Those are created in `inherit` mode if the config field is `unspecified` so that users who don't need
placeholders are not bothered by these details.
Future Work:
Automatically warn existing users of encrypt-on-recv about the problem
if they are affected.
The problem that I hit during implementation of this is that the
`encryption` prop's `source` doesn't quite behave like other props:
`source` is `default` for `encryption=off` and `-` when `encryption=on`.
Hence, we can't use `source` to distinguish the following 2x2 cases:
(1) placeholder created with explicit -o encryption=off
(2) placeholder created without specifying -o encryption
with
(A) an encrypted parent at creation time
(B) an unencrypted parent at creation time
- Substitute full words for both string name 'gridspec' and short form 'grid spec'
- Fix alignment and make spacing more consistent
- Fix fall of snapshots into buckets for the example to really reflect right-exclusiveness
closes https://github.com/zrepl/zrepl/pull/535
We had too many spurious test failures in the past.
But on a developer machine, the tests don't usually fail because the
system isn't loaded as much.
So, only disable test on CircleCI.
When we need artifacts, we use MinIO anyways.
And we have accumulated about 1TiB of (free) CircleCI artifact storage.
Don't need to waste space unnecessarily.
zrepl daemon panics when the snap job triggers
fixup for f5f269bfd5 (bandwidth limiting)
fixes#521
Oct 01 16:14:56 cstp zrepl[56563]: panic: invalid config`BandwidthLimit` field invalid: BucketCapacity must not be zero
Oct 01 16:14:56 cstp zrepl[56563]: panic: end span: span still has active child spans
Oct 01 16:14:56 cstp zrepl[56563]: goroutine 38 [running]:
Oct 01 16:14:56 cstp zrepl[56563]: github.com/zrepl/zrepl/daemon/logging/trace.WithSpan.func2()
Oct 01 16:14:56 cstp zrepl[56563]: /home/cs/zrepl/zrepl/daemon/logging/trace/trace.go:341 +0x2ea
Oct 01 16:14:56 cstp zrepl[56563]: github.com/zrepl/zrepl/daemon/logging/trace.WithTaskAndSpan.func1()
Oct 01 16:14:56 cstp zrepl[56563]: /home/cs/zrepl/zrepl/daemon/logging/trace/trace_convenience.go:40 +0x2e
Oct 01 16:14:56 cstp zrepl[56563]: panic(0xcee9c0, 0xc000676730)
Oct 01 16:14:56 cstp zrepl[56563]: /home/cs/go1.16.6/src/runtime/panic.go:965 +0x1b9
Oct 01 16:14:56 cstp zrepl[56563]: github.com/zrepl/zrepl/endpoint.NewSender(0xf5bbc0, 0xc0003840c0, 0xc0000b2c90, 0x4, 0xc0002c5958, 0x0, 0x0, 0x0, 0xc000068cf8)
Oct 01 16:14:56 cstp zrepl[56563]: /home/cs/zrepl/zrepl/endpoint/endpoint.go:68 +0x1ec
Oct 01 16:14:56 cstp zrepl[56563]: github.com/zrepl/zrepl/daemon/job.(*SnapJob).doPrune(0xc00039e000, 0xf6e3b8, 0xc0006541b0)
Oct 01 16:14:56 cstp zrepl[56563]: /home/cs/zrepl/zrepl/daemon/job/snapjob.go:179 +0x198
Oct 01 16:14:56 cstp zrepl[56563]: github.com/zrepl/zrepl/daemon/job.(*SnapJob).Run(0xc00039e000, 0xf6e3b8, 0xc0001d83c0)
Oct 01 16:14:56 cstp zrepl[56563]: /home/cs/zrepl/zrepl/daemon/job/snapjob.go:127 +0x329
Oct 01 16:14:56 cstp zrepl[56563]: github.com/zrepl/zrepl/daemon.(*jobs).start.func1(0xc0006a4100, 0xf6e3b8, 0xc00022a0f0, 0xf72d18, 0xc00039e000)
Oct 01 16:14:56 cstp zrepl[56563]: /home/cs/zrepl/zrepl/daemon/daemon.go:255 +0x15b
Oct 01 16:14:56 cstp zrepl[56563]: created by github.com/zrepl/zrepl/daemon.(*jobs).start
Oct 01 16:14:56 cstp zrepl[56563]: /home/cs/zrepl/zrepl/daemon/daemon.go:251 +0x425
Oct 01 16:14:56 cstp systemd[1]: zrepl.service: Main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 01 16:14:56 cstp systemd[1]: zrepl.service: Failed with result 'exit-code'.
This commit was motivated by https://github.com/zrepl/zrepl/issues/495
where, on FreeBSD with OpenZFS 2.0, a SendStream.Close() call might wait indefinitely for `zfs send` to exit.
The reason is that, due to the refactoring done for redacted send & recv
(30af21b025),
the `dump_bytes` function, which writes to the pipe, executes in a separate thread (synctask taskq) iff not `HAVE_LARGE_STACKS`.
The `zfs send` process/thread waits for that taskq thread using an uninterruptible primitive.
So when we SIGKILL `zfs send`, that signal doesn't reach the right thread to interrupt the pipe write.
Theoretically this affects both Linux and FreeBSD, but most Linux users `HAVE_LARGE_STACKS` and since https://github.com/penzfs/zfs/pull/12350/files OpenZFS on FreeBSD `HAVE_LARGE_STACKS` as well.
However, at least until FreeBSD 13.1, possibly for the entire 13 lifecycle, we're going to have to live with that oddity.
Measures taken in this commit:
- Report the behavior as an upstream bug https://github.com/openzfs/zfs/issues/12500
- Change SendStream code so that it closes zrepl's read-end of the pipe (see comment in code)
- Clean up and make explicit SendStream's state handling
- Write extensive platformtests for SendStream
- They pass on my Linux install and on FreeBSD 12
- FreeBSD 13 still needs testing.
fixes https://github.com/zrepl/zrepl/issues/495
I generally like when snippets are provided in a way which could be used without running as root, and uses sudo when applicable. This change allows for this.
It will, however print out one extra line, which is possible to remove by adding '>/dev/null' after '/etc/apt/sources.list.d/zrepl.list'.
closes#461
This was merged to master prematurely as the job components are not decoupled well enough
for these signals to be useful yet.
This reverts commit 2c8c2cfa14.
closes#452
Addition by @problame: move getPipeCapacityHint() into platform-specific
code. This has the added benefit of not recognizing the envvar as an
envconst on platform that do not support resizing pipes. => won't show
up in (zrepl status --raw).Global.Envconst
fixes#424
cloes #449
A fairly common pattern when presented with JSON is to pipe it to `jq`.
This also allows one to `zrepl status --mode raw > log` and operate on
the JSON there.
closes#442
